1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * C29XPCIE board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_C29XPCIE 15 #define CONFIG_PPC_C29X 16 #endif 17 18 #ifdef CONFIG_SPIFLASH 19 #define CONFIG_RAMBOOT_SPIFLASH 20 #define CONFIG_SYS_TEXT_BASE 0x11000000 21 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 22 #endif 23 24 #ifdef CONFIG_NAND 25 #ifdef CONFIG_TPL_BUILD 26 #define CONFIG_SPL_NAND_BOOT 27 #define CONFIG_SPL_FLUSH_IMAGE 28 #define CONFIG_SPL_NAND_INIT 29 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT 30 #define CONFIG_SPL_COMMON_INIT_DDR 31 #define CONFIG_SPL_MAX_SIZE (128 << 10) 32 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 33 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 34 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 35 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 36 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 37 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 38 #elif defined(CONFIG_SPL_BUILD) 39 #define CONFIG_SPL_INIT_MINIMAL 40 #define CONFIG_SPL_NAND_MINIMAL 41 #define CONFIG_SPL_FLUSH_IMAGE 42 #define CONFIG_SPL_TEXT_BASE 0xff800000 43 #define CONFIG_SPL_MAX_SIZE 8192 44 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 45 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 46 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 47 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 48 #endif 49 #define CONFIG_SPL_PAD_TO 0x20000 50 #define CONFIG_TPL_PAD_TO 0x20000 51 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 52 #define CONFIG_SYS_TEXT_BASE 0x11001000 53 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 54 #endif 55 56 #ifndef CONFIG_SYS_TEXT_BASE 57 #define CONFIG_SYS_TEXT_BASE 0xeff40000 58 #endif 59 60 #ifndef CONFIG_RESET_VECTOR_ADDRESS 61 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 62 #endif 63 64 #ifdef CONFIG_SPL_BUILD 65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 66 #else 67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 68 #endif 69 70 #ifdef CONFIG_SPL_BUILD 71 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 72 #endif 73 74 /* High Level Configuration Options */ 75 #define CONFIG_BOOKE /* BOOKE */ 76 #define CONFIG_E500 /* BOOKE e500 family */ 77 #define CONFIG_FSL_IFC /* Enable IFC Support */ 78 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 79 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 80 81 #ifdef CONFIG_PCI 82 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 83 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 84 #define CONFIG_PCI_INDIRECT_BRIDGE 85 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 86 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 87 88 #define CONFIG_CMD_PCI 89 90 /* 91 * PCI Windows 92 * Memory space is mapped 1-1, but I/O space must start from 0. 93 */ 94 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 95 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 96 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 97 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 98 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 99 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 100 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 101 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 102 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 103 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 104 105 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 106 #define CONFIG_DOS_PARTITION 107 #endif 108 109 #define CONFIG_FSL_LAW /* Use common FSL init code */ 110 #define CONFIG_TSEC_ENET 111 #define CONFIG_ENV_OVERWRITE 112 113 #define CONFIG_DDR_CLK_FREQ 100000000 114 #define CONFIG_SYS_CLK_FREQ 66666666 115 116 #define CONFIG_HWCONFIG 117 118 /* 119 * These can be toggled for performance analysis, otherwise use default. 120 */ 121 #define CONFIG_L2_CACHE /* toggle L2 cache */ 122 #define CONFIG_BTB /* toggle branch predition */ 123 124 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 125 126 #define CONFIG_ENABLE_36BIT_PHYS 127 128 #define CONFIG_ADDR_MAP 1 129 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 130 131 #define CONFIG_SYS_MEMTEST_START 0x00200000 132 #define CONFIG_SYS_MEMTEST_END 0x00400000 133 #define CONFIG_PANIC_HANG 134 135 /* DDR Setup */ 136 #define CONFIG_SYS_FSL_DDR3 137 #define CONFIG_DDR_SPD 138 #define CONFIG_SYS_SPD_BUS_NUM 0 139 #define SPD_EEPROM_ADDRESS 0x50 140 #define CONFIG_SYS_DDR_RAW_TIMING 141 142 /* DDR ECC Setup*/ 143 #define CONFIG_DDR_ECC 144 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 145 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 146 147 #define CONFIG_SYS_SDRAM_SIZE 512 148 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 149 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 150 151 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 152 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 153 154 #define CONFIG_SYS_CCSRBAR 0xffe00000 155 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 156 157 /* Platform SRAM setting */ 158 #define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 159 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ 160 (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) 161 #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) 162 163 #ifdef CONFIG_SPL_BUILD 164 #define CONFIG_SYS_NO_FLASH 165 #endif 166 167 /* 168 * IFC Definitions 169 */ 170 /* NOR Flash on IFC */ 171 #define CONFIG_SYS_FLASH_BASE 0xec000000 172 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 173 174 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 175 176 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 177 #define CONFIG_SYS_MAX_FLASH_BANKS 1 178 179 #define CONFIG_SYS_FLASH_QUIET_TEST 180 #define CONFIG_FLASH_SHOW_PROGRESS 45 181 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ 182 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ 183 184 /* 16Bit NOR Flash - S29GL512S10TFI01 */ 185 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 186 CSPR_PORT_SIZE_16 | \ 187 CSPR_MSEL_NOR | \ 188 CSPR_V) 189 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) 190 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) 191 192 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 193 FTIM0_NOR_TEADC(0x5) | \ 194 FTIM0_NOR_TEAHC(0x5)) 195 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 196 FTIM1_NOR_TRAD_NOR(0x1A) |\ 197 FTIM1_NOR_TSEQRAD_NOR(0x13)) 198 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 199 FTIM2_NOR_TCH(0x4) | \ 200 FTIM2_NOR_TWPH(0x0E) | \ 201 FTIM2_NOR_TWP(0x1c)) 202 #define CONFIG_SYS_NOR_FTIM3 0x0 203 204 /* CFI for NOR Flash */ 205 #define CONFIG_FLASH_CFI_DRIVER 206 #define CONFIG_SYS_FLASH_CFI 207 #define CONFIG_SYS_FLASH_EMPTY_INFO 208 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 209 210 /* NAND Flash on IFC */ 211 #define CONFIG_NAND_FSL_IFC 212 #define CONFIG_SYS_NAND_BASE 0xff800000 213 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 214 215 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 216 217 #define CONFIG_SYS_MAX_NAND_DEVICE 1 218 #define CONFIG_CMD_NAND 219 #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) 220 221 /* 8Bit NAND Flash - K9F1G08U0B */ 222 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 223 | CSPR_PORT_SIZE_8 \ 224 | CSPR_MSEL_NAND \ 225 | CSPR_V) 226 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 227 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ 228 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 229 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 230 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 231 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 232 | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ 233 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ 234 | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ 235 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ 236 FTIM0_NAND_TWP(0x0c) | \ 237 FTIM0_NAND_TWCHT(0x08) | \ 238 FTIM0_NAND_TWH(0x06)) 239 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ 240 FTIM1_NAND_TWBE(0x1d) | \ 241 FTIM1_NAND_TRR(0x08) | \ 242 FTIM1_NAND_TRP(0x0c)) 243 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ 244 FTIM2_NAND_TREH(0x0a) | \ 245 FTIM2_NAND_TWHRE(0x18)) 246 #define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) 247 248 #define CONFIG_SYS_NAND_DDR_LAW 11 249 250 /* Set up IFC registers for boot location NOR/NAND */ 251 #ifdef CONFIG_NAND 252 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 253 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 254 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 255 #define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE 256 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 257 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 258 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 259 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 260 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 261 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 262 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 263 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 264 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 265 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 266 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 267 #else 268 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 269 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 270 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 271 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 272 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 273 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 274 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 275 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 276 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 277 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 278 #define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE 279 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 280 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 281 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 282 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 283 #endif 284 285 /* CPLD on IFC, selected by CS2 */ 286 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 287 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ 288 | CONFIG_SYS_CPLD_BASE) 289 290 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 291 | CSPR_PORT_SIZE_8 \ 292 | CSPR_MSEL_GPCM \ 293 | CSPR_V) 294 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 295 #define CONFIG_SYS_CSOR2 0x0 296 /* CPLD Timing parameters for IFC CS2 */ 297 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 298 FTIM0_GPCM_TEADC(0x0e) | \ 299 FTIM0_GPCM_TEAHC(0x0e)) 300 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 301 FTIM1_GPCM_TRAD(0x1f)) 302 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 303 FTIM2_GPCM_TCH(0x8) | \ 304 FTIM2_GPCM_TWP(0x1f)) 305 #define CONFIG_SYS_CS2_FTIM3 0x0 306 307 #if defined(CONFIG_RAMBOOT_SPIFLASH) 308 #define CONFIG_SYS_RAMBOOT 309 #define CONFIG_SYS_EXTRA_ENV_RELOC 310 #endif 311 312 #define CONFIG_BOARD_EARLY_INIT_R 313 314 #define CONFIG_SYS_INIT_RAM_LOCK 315 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 316 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 317 318 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ 319 - GENERATED_GBL_DATA_SIZE) 320 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 321 322 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 323 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) 324 325 /* 326 * Config the L2 Cache as L2 SRAM 327 */ 328 #if defined(CONFIG_SPL_BUILD) 329 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 330 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 331 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 332 #define CONFIG_SYS_L2_SIZE (256 << 10) 333 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 334 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 335 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 336 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 337 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) 338 #define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) 339 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 340 #elif defined(CONFIG_NAND) 341 #ifdef CONFIG_TPL_BUILD 342 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 343 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 344 #define CONFIG_SYS_L2_SIZE (256 << 10) 345 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 346 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 347 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 348 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 349 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 350 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 351 #else 352 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 353 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 354 #define CONFIG_SYS_L2_SIZE (256 << 10) 355 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 356 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 357 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 358 #endif 359 #endif 360 #endif 361 362 /* Serial Port */ 363 #define CONFIG_CONS_INDEX 1 364 #define CONFIG_SYS_NS16550_SERIAL 365 #define CONFIG_SYS_NS16550_REG_SIZE 1 366 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 367 368 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 369 #define CONFIG_NS16550_MIN_FUNCTIONS 370 #endif 371 372 #define CONFIG_SYS_BAUDRATE_TABLE \ 373 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 374 375 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 376 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 377 378 #define CONFIG_SYS_I2C 379 #define CONFIG_SYS_I2C_FSL 380 #define CONFIG_SYS_FSL_I2C_SPEED 400000 381 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 382 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 383 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 384 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 385 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 386 387 /* I2C EEPROM */ 388 /* enable read and write access to EEPROM */ 389 #define CONFIG_CMD_EEPROM 390 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 391 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 392 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 393 394 /* eSPI - Enhanced SPI */ 395 #define CONFIG_SF_DEFAULT_SPEED 10000000 396 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 397 398 #ifdef CONFIG_TSEC_ENET 399 #define CONFIG_MII /* MII PHY management */ 400 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 401 #define CONFIG_TSEC1 1 402 #define CONFIG_TSEC1_NAME "eTSEC1" 403 #define CONFIG_TSEC2 1 404 #define CONFIG_TSEC2_NAME "eTSEC2" 405 406 /* Default mode is RGMII mode */ 407 #define TSEC1_PHY_ADDR 0 408 #define TSEC2_PHY_ADDR 2 409 410 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 411 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 412 413 #define CONFIG_ETHPRIME "eTSEC1" 414 415 #define CONFIG_PHY_GIGE 416 #endif /* CONFIG_TSEC_ENET */ 417 418 /* 419 * Environment 420 */ 421 #if defined(CONFIG_SYS_RAMBOOT) 422 #if defined(CONFIG_RAMBOOT_SPIFLASH) 423 #define CONFIG_ENV_IS_IN_SPI_FLASH 424 #define CONFIG_ENV_SPI_BUS 0 425 #define CONFIG_ENV_SPI_CS 0 426 #define CONFIG_ENV_SPI_MAX_HZ 10000000 427 #define CONFIG_ENV_SPI_MODE 0 428 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 429 #define CONFIG_ENV_SECT_SIZE 0x10000 430 #define CONFIG_ENV_SIZE 0x2000 431 #endif 432 #elif defined(CONFIG_NAND) 433 #define CONFIG_ENV_IS_IN_NAND 434 #ifdef CONFIG_TPL_BUILD 435 #define CONFIG_ENV_SIZE 0x2000 436 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 437 #else 438 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 439 #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE 440 #endif 441 #define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE 442 #else 443 #define CONFIG_ENV_IS_IN_FLASH 444 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 445 #define CONFIG_ENV_SIZE 0x2000 446 #define CONFIG_ENV_SECT_SIZE 0x20000 447 #endif 448 449 #define CONFIG_LOADS_ECHO 450 #define CONFIG_SYS_LOADS_BAUD_CHANGE 451 452 /* 453 * Command line configuration. 454 */ 455 #define CONFIG_CMD_ERRATA 456 #define CONFIG_CMD_IRQ 457 #define CONFIG_CMD_REGINFO 458 459 /* Hash command with SHA acceleration supported in hardware */ 460 #ifdef CONFIG_FSL_CAAM 461 #define CONFIG_CMD_HASH 462 #define CONFIG_SHA_HW_ACCEL 463 #endif 464 465 /* 466 * Miscellaneous configurable options 467 */ 468 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 469 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 470 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 471 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 472 473 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 474 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 475 /* Print Buffer Size */ 476 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 477 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 478 479 /* 480 * For booting Linux, the board info and command line data 481 * have to be in the first 64 MB of memory, since this is 482 * the maximum mapped by the Linux kernel during initialization. 483 */ 484 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 485 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 486 487 /* 488 * Environment Configuration 489 */ 490 491 #ifdef CONFIG_TSEC_ENET 492 #define CONFIG_HAS_ETH0 493 #define CONFIG_HAS_ETH1 494 #endif 495 496 #define CONFIG_ROOTPATH "/opt/nfsroot" 497 #define CONFIG_BOOTFILE "uImage" 498 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 499 500 /* default location for tftp and bootm */ 501 #define CONFIG_LOADADDR 1000000 502 503 504 #define CONFIG_BAUDRATE 115200 505 506 #define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on 507 508 #define CONFIG_EXTRA_ENV_SETTINGS \ 509 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 510 "netdev=eth0\0" \ 511 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 512 "loadaddr=1000000\0" \ 513 "consoledev=ttyS0\0" \ 514 "ramdiskaddr=2000000\0" \ 515 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 516 "fdtaddr=1e00000\0" \ 517 "fdtfile=name/of/device-tree.dtb\0" \ 518 "othbootargs=ramdisk_size=600000\0" \ 519 520 #define CONFIG_RAMBOOTCOMMAND \ 521 "setenv bootargs root=/dev/ram rw " \ 522 "console=$consoledev,$baudrate $othbootargs; " \ 523 "tftp $ramdiskaddr $ramdiskfile;" \ 524 "tftp $loadaddr $bootfile;" \ 525 "tftp $fdtaddr $fdtfile;" \ 526 "bootm $loadaddr $ramdiskaddr $fdtaddr" 527 528 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 529 530 #include <asm/fsl_secure_boot.h> 531 532 #endif /* __CONFIG_H */ 533