1 /* 2 * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus. 3 * 4 * Interrupt support is added. Now, it has been tested 5 * on ULI1575 chip and works well with USB keyboard. 6 * 7 * (C) Copyright 2007 8 * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com> 9 * 10 * (C) Copyright 2003 11 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de> 12 * 13 * Note: Much of this code has been derived from Linux 2.4 14 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 15 * (C) Copyright 2000-2002 David Brownell 16 * 17 * Modified for the MP2USB by (C) Copyright 2005 Eric Benard 18 * ebenard@eukrea.com - based on s3c24x0's driver 19 * 20 * SPDX-License-Identifier: GPL-2.0+ 21 */ 22 /* 23 * IMPORTANT NOTES 24 * 1 - Read doc/README.generic_usb_ohci 25 * 2 - this driver is intended for use with USB Mass Storage Devices 26 * (BBB) and USB keyboard. There is NO support for Isochronous pipes! 27 * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG 28 * to activate workaround for bug #41 or this driver will NOT work! 29 */ 30 31 #include <common.h> 32 #include <asm/byteorder.h> 33 #include <dm.h> 34 #include <errno.h> 35 36 #if defined(CONFIG_PCI_OHCI) 37 # include <pci.h> 38 #if !defined(CONFIG_PCI_OHCI_DEVNO) 39 #define CONFIG_PCI_OHCI_DEVNO 0 40 #endif 41 #endif 42 43 #include <malloc.h> 44 #include <usb.h> 45 46 #include "ohci.h" 47 48 #ifdef CONFIG_AT91RM9200 49 #include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */ 50 #endif 51 52 #if defined(CONFIG_CPU_ARM920T) || \ 53 defined(CONFIG_S3C24X0) || \ 54 defined(CONFIG_440EP) || \ 55 defined(CONFIG_PCI_OHCI) || \ 56 defined(CONFIG_MPC5200) || \ 57 defined(CONFIG_SYS_OHCI_USE_NPS) 58 # define OHCI_USE_NPS /* force NoPowerSwitching mode */ 59 #endif 60 61 #undef OHCI_VERBOSE_DEBUG /* not always helpful */ 62 #undef DEBUG 63 #undef SHOW_INFO 64 #undef OHCI_FILL_TRACE 65 66 /* For initializing controller (mask in an HCFS mode too) */ 67 #define OHCI_CONTROL_INIT \ 68 (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE 69 70 #ifdef CONFIG_PCI_OHCI 71 static struct pci_device_id ohci_pci_ids[] = { 72 {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */ 73 {0x1033, 0x0035}, /* NEC PCI OHCI module ids */ 74 {0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */ 75 /* Please add supported PCI OHCI controller ids here */ 76 {0, 0} 77 }; 78 #endif 79 80 #ifdef CONFIG_PCI_EHCI_DEVNO 81 static struct pci_device_id ehci_pci_ids[] = { 82 {0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */ 83 /* Please add supported PCI EHCI controller ids here */ 84 {0, 0} 85 }; 86 #endif 87 88 #ifdef DEBUG 89 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) 90 #else 91 #define dbg(format, arg...) do {} while (0) 92 #endif /* DEBUG */ 93 #define err(format, arg...) printf("ERROR: " format "\n", ## arg) 94 #ifdef SHOW_INFO 95 #define info(format, arg...) printf("INFO: " format "\n", ## arg) 96 #else 97 #define info(format, arg...) do {} while (0) 98 #endif 99 100 #ifdef CONFIG_SYS_OHCI_BE_CONTROLLER 101 # define m16_swap(x) cpu_to_be16(x) 102 # define m32_swap(x) cpu_to_be32(x) 103 #else 104 # define m16_swap(x) cpu_to_le16(x) 105 # define m32_swap(x) cpu_to_le32(x) 106 #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */ 107 108 #ifdef CONFIG_DM_USB 109 /* 110 * We really should do proper cache flushing everywhere, but for now we only 111 * do it for new (driver-model) usb code to avoid regressions. 112 */ 113 #define flush_dcache_buffer(addr, size) \ 114 flush_dcache_range((unsigned long)(addr), \ 115 ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN)) 116 #define invalidate_dcache_buffer(addr, size) \ 117 invalidate_dcache_range((unsigned long)(addr), \ 118 ALIGN((unsigned long)(addr) + size, ARCH_DMA_MINALIGN)) 119 #else 120 #define flush_dcache_buffer(addr, size) 121 #define invalidate_dcache_buffer(addr, size) 122 #endif 123 124 /* Do not use sizeof(ed / td) as our ed / td structs contain extra members */ 125 #define flush_dcache_ed(addr) flush_dcache_buffer(addr, 16) 126 #define flush_dcache_td(addr) flush_dcache_buffer(addr, 16) 127 #define flush_dcache_iso_td(addr) flush_dcache_buffer(addr, 32) 128 #define flush_dcache_hcca(addr) flush_dcache_buffer(addr, 256) 129 #define invalidate_dcache_ed(addr) invalidate_dcache_buffer(addr, 16) 130 #define invalidate_dcache_td(addr) invalidate_dcache_buffer(addr, 16) 131 #define invalidate_dcache_iso_td(addr) invalidate_dcache_buffer(addr, 32) 132 #define invalidate_dcache_hcca(addr) invalidate_dcache_buffer(addr, 256) 133 134 #ifdef CONFIG_DM_USB 135 /* 136 * The various ohci_mdelay(1) calls in the code seem unnecessary. We keep 137 * them around when building for older boards not yet converted to the dm 138 * just in case (to avoid regressions), for dm this turns them into nops. 139 */ 140 #define ohci_mdelay(x) 141 #else 142 #define ohci_mdelay(x) mdelay(x) 143 #endif 144 145 #ifndef CONFIG_DM_USB 146 /* global ohci_t */ 147 static ohci_t gohci; 148 /* this must be aligned to a 256 byte boundary */ 149 struct ohci_hcca ghcca[1]; 150 #endif 151 152 /* mapping of the OHCI CC status to error codes */ 153 static int cc_to_error[16] = { 154 /* No Error */ 0, 155 /* CRC Error */ USB_ST_CRC_ERR, 156 /* Bit Stuff */ USB_ST_BIT_ERR, 157 /* Data Togg */ USB_ST_CRC_ERR, 158 /* Stall */ USB_ST_STALLED, 159 /* DevNotResp */ -1, 160 /* PIDCheck */ USB_ST_BIT_ERR, 161 /* UnExpPID */ USB_ST_BIT_ERR, 162 /* DataOver */ USB_ST_BUF_ERR, 163 /* DataUnder */ USB_ST_BUF_ERR, 164 /* reservd */ -1, 165 /* reservd */ -1, 166 /* BufferOver */ USB_ST_BUF_ERR, 167 /* BuffUnder */ USB_ST_BUF_ERR, 168 /* Not Access */ -1, 169 /* Not Access */ -1 170 }; 171 172 static const char *cc_to_string[16] = { 173 "No Error", 174 "CRC: Last data packet from endpoint contained a CRC error.", 175 "BITSTUFFING: Last data packet from endpoint contained a bit " \ 176 "stuffing violation", 177 "DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \ 178 "that did not match the expected value.", 179 "STALL: TD was moved to the Done Queue because the endpoint returned" \ 180 " a STALL PID", 181 "DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \ 182 "not provide a handshake (OUT)", 183 "PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\ 184 "(IN) or handshake (OUT)", 185 "UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \ 186 "value is not defined.", 187 "DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \ 188 "either the size of the maximum data packet allowed\n" \ 189 "from the endpoint (found in MaximumPacketSize field\n" \ 190 "of ED) or the remaining buffer size.", 191 "DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \ 192 "and that amount was not sufficient to fill the\n" \ 193 "specified buffer", 194 "reserved1", 195 "reserved2", 196 "BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \ 197 "than it could be written to system memory", 198 "BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \ 199 "system memory fast enough to keep up with data USB " \ 200 "data rate.", 201 "NOT ACCESSED: This code is set by software before the TD is placed" \ 202 "on a list to be processed by the HC.(1)", 203 "NOT ACCESSED: This code is set by software before the TD is placed" \ 204 "on a list to be processed by the HC.(2)", 205 }; 206 207 static inline u32 roothub_a(struct ohci *hc) 208 { return ohci_readl(&hc->regs->roothub.a); } 209 static inline u32 roothub_b(struct ohci *hc) 210 { return ohci_readl(&hc->regs->roothub.b); } 211 static inline u32 roothub_status(struct ohci *hc) 212 { return ohci_readl(&hc->regs->roothub.status); } 213 static inline u32 roothub_portstatus(struct ohci *hc, int i) 214 { return ohci_readl(&hc->regs->roothub.portstatus[i]); } 215 216 /* forward declaration */ 217 static int hc_interrupt(ohci_t *ohci); 218 static void td_submit_job(ohci_t *ohci, struct usb_device *dev, 219 unsigned long pipe, void *buffer, int transfer_len, 220 struct devrequest *setup, urb_priv_t *urb, 221 int interval); 222 static int ep_link(ohci_t * ohci, ed_t * ed); 223 static int ep_unlink(ohci_t * ohci, ed_t * ed); 224 static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev, 225 unsigned long pipe, int interval, int load); 226 227 /*-------------------------------------------------------------------------*/ 228 229 /* TDs ... */ 230 static struct td *td_alloc(ohci_dev_t *ohci_dev, struct usb_device *usb_dev) 231 { 232 int i; 233 struct td *td; 234 235 td = NULL; 236 for (i = 0; i < NUM_TD; i++) 237 { 238 if (ohci_dev->tds[i].usb_dev == NULL) 239 { 240 td = &ohci_dev->tds[i]; 241 td->usb_dev = usb_dev; 242 break; 243 } 244 } 245 246 return td; 247 } 248 249 static inline void ed_free(struct ed *ed) 250 { 251 ed->usb_dev = NULL; 252 } 253 254 /*-------------------------------------------------------------------------* 255 * URB support functions 256 *-------------------------------------------------------------------------*/ 257 258 /* free HCD-private data associated with this URB */ 259 260 static void urb_free_priv(urb_priv_t *urb) 261 { 262 int i; 263 int last; 264 struct td *td; 265 266 last = urb->length - 1; 267 if (last >= 0) { 268 for (i = 0; i <= last; i++) { 269 td = urb->td[i]; 270 if (td) { 271 td->usb_dev = NULL; 272 urb->td[i] = NULL; 273 } 274 } 275 } 276 free(urb); 277 } 278 279 /*-------------------------------------------------------------------------*/ 280 281 #ifdef DEBUG 282 static int sohci_get_current_frame_number(ohci_t *ohci); 283 284 /* debug| print the main components of an URB 285 * small: 0) header + data packets 1) just header */ 286 287 static void pkt_print(ohci_t *ohci, urb_priv_t *purb, struct usb_device *dev, 288 unsigned long pipe, void *buffer, int transfer_len, 289 struct devrequest *setup, char *str, int small) 290 { 291 dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx", 292 str, 293 sohci_get_current_frame_number(ohci), 294 usb_pipedevice(pipe), 295 usb_pipeendpoint(pipe), 296 usb_pipeout(pipe)? 'O': 'I', 297 usb_pipetype(pipe) < 2 ? \ 298 (usb_pipeint(pipe)? "INTR": "ISOC"): \ 299 (usb_pipecontrol(pipe)? "CTRL": "BULK"), 300 (purb ? purb->actual_length : 0), 301 transfer_len, dev->status); 302 #ifdef OHCI_VERBOSE_DEBUG 303 if (!small) { 304 int i, len; 305 306 if (usb_pipecontrol(pipe)) { 307 printf(__FILE__ ": cmd(8):"); 308 for (i = 0; i < 8 ; i++) 309 printf(" %02x", ((__u8 *) setup) [i]); 310 printf("\n"); 311 } 312 if (transfer_len > 0 && buffer) { 313 printf(__FILE__ ": data(%d/%d):", 314 (purb ? purb->actual_length : 0), 315 transfer_len); 316 len = usb_pipeout(pipe)? transfer_len: 317 (purb ? purb->actual_length : 0); 318 for (i = 0; i < 16 && i < len; i++) 319 printf(" %02x", ((__u8 *) buffer) [i]); 320 printf("%s\n", i < len? "...": ""); 321 } 322 } 323 #endif 324 } 325 326 /* just for debugging; prints non-empty branches of the int ed tree 327 * inclusive iso eds */ 328 void ep_print_int_eds(ohci_t *ohci, char *str) 329 { 330 int i, j; 331 __u32 *ed_p; 332 for (i = 0; i < 32; i++) { 333 j = 5; 334 ed_p = &(ohci->hcca->int_table [i]); 335 if (*ed_p == 0) 336 continue; 337 invalidate_dcache_ed(ed_p); 338 printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i); 339 while (*ed_p != 0 && j--) { 340 ed_t *ed = (ed_t *)m32_swap(ed_p); 341 invalidate_dcache_ed(ed); 342 printf(" ed: %4x;", ed->hwINFO); 343 ed_p = &ed->hwNextED; 344 } 345 printf("\n"); 346 } 347 } 348 349 static void ohci_dump_intr_mask(char *label, __u32 mask) 350 { 351 dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s", 352 label, 353 mask, 354 (mask & OHCI_INTR_MIE) ? " MIE" : "", 355 (mask & OHCI_INTR_OC) ? " OC" : "", 356 (mask & OHCI_INTR_RHSC) ? " RHSC" : "", 357 (mask & OHCI_INTR_FNO) ? " FNO" : "", 358 (mask & OHCI_INTR_UE) ? " UE" : "", 359 (mask & OHCI_INTR_RD) ? " RD" : "", 360 (mask & OHCI_INTR_SF) ? " SF" : "", 361 (mask & OHCI_INTR_WDH) ? " WDH" : "", 362 (mask & OHCI_INTR_SO) ? " SO" : "" 363 ); 364 } 365 366 static void maybe_print_eds(char *label, __u32 value) 367 { 368 ed_t *edp = (ed_t *)value; 369 370 if (value) { 371 dbg("%s %08x", label, value); 372 invalidate_dcache_ed(edp); 373 dbg("%08x", edp->hwINFO); 374 dbg("%08x", edp->hwTailP); 375 dbg("%08x", edp->hwHeadP); 376 dbg("%08x", edp->hwNextED); 377 } 378 } 379 380 static char *hcfs2string(int state) 381 { 382 switch (state) { 383 case OHCI_USB_RESET: return "reset"; 384 case OHCI_USB_RESUME: return "resume"; 385 case OHCI_USB_OPER: return "operational"; 386 case OHCI_USB_SUSPEND: return "suspend"; 387 } 388 return "?"; 389 } 390 391 /* dump control and status registers */ 392 static void ohci_dump_status(ohci_t *controller) 393 { 394 struct ohci_regs *regs = controller->regs; 395 __u32 temp; 396 397 temp = ohci_readl(®s->revision) & 0xff; 398 if (temp != 0x10) 399 dbg("spec %d.%d", (temp >> 4), (temp & 0x0f)); 400 401 temp = ohci_readl(®s->control); 402 dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, 403 (temp & OHCI_CTRL_RWE) ? " RWE" : "", 404 (temp & OHCI_CTRL_RWC) ? " RWC" : "", 405 (temp & OHCI_CTRL_IR) ? " IR" : "", 406 hcfs2string(temp & OHCI_CTRL_HCFS), 407 (temp & OHCI_CTRL_BLE) ? " BLE" : "", 408 (temp & OHCI_CTRL_CLE) ? " CLE" : "", 409 (temp & OHCI_CTRL_IE) ? " IE" : "", 410 (temp & OHCI_CTRL_PLE) ? " PLE" : "", 411 temp & OHCI_CTRL_CBSR 412 ); 413 414 temp = ohci_readl(®s->cmdstatus); 415 dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, 416 (temp & OHCI_SOC) >> 16, 417 (temp & OHCI_OCR) ? " OCR" : "", 418 (temp & OHCI_BLF) ? " BLF" : "", 419 (temp & OHCI_CLF) ? " CLF" : "", 420 (temp & OHCI_HCR) ? " HCR" : "" 421 ); 422 423 ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus)); 424 ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable)); 425 426 maybe_print_eds("ed_periodcurrent", 427 ohci_readl(®s->ed_periodcurrent)); 428 429 maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead)); 430 maybe_print_eds("ed_controlcurrent", 431 ohci_readl(®s->ed_controlcurrent)); 432 433 maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead)); 434 maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent)); 435 436 maybe_print_eds("donehead", ohci_readl(®s->donehead)); 437 } 438 439 static void ohci_dump_roothub(ohci_t *controller, int verbose) 440 { 441 __u32 temp, ndp, i; 442 443 temp = roothub_a(controller); 444 ndp = (temp & RH_A_NDP); 445 #ifdef CONFIG_AT91C_PQFP_UHPBUG 446 ndp = (ndp == 2) ? 1:0; 447 #endif 448 if (verbose) { 449 dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, 450 ((temp & RH_A_POTPGT) >> 24) & 0xff, 451 (temp & RH_A_NOCP) ? " NOCP" : "", 452 (temp & RH_A_OCPM) ? " OCPM" : "", 453 (temp & RH_A_DT) ? " DT" : "", 454 (temp & RH_A_NPS) ? " NPS" : "", 455 (temp & RH_A_PSM) ? " PSM" : "", 456 ndp 457 ); 458 temp = roothub_b(controller); 459 dbg("roothub.b: %08x PPCM=%04x DR=%04x", 460 temp, 461 (temp & RH_B_PPCM) >> 16, 462 (temp & RH_B_DR) 463 ); 464 temp = roothub_status(controller); 465 dbg("roothub.status: %08x%s%s%s%s%s%s", 466 temp, 467 (temp & RH_HS_CRWE) ? " CRWE" : "", 468 (temp & RH_HS_OCIC) ? " OCIC" : "", 469 (temp & RH_HS_LPSC) ? " LPSC" : "", 470 (temp & RH_HS_DRWE) ? " DRWE" : "", 471 (temp & RH_HS_OCI) ? " OCI" : "", 472 (temp & RH_HS_LPS) ? " LPS" : "" 473 ); 474 } 475 476 for (i = 0; i < ndp; i++) { 477 temp = roothub_portstatus(controller, i); 478 dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", 479 i, 480 temp, 481 (temp & RH_PS_PRSC) ? " PRSC" : "", 482 (temp & RH_PS_OCIC) ? " OCIC" : "", 483 (temp & RH_PS_PSSC) ? " PSSC" : "", 484 (temp & RH_PS_PESC) ? " PESC" : "", 485 (temp & RH_PS_CSC) ? " CSC" : "", 486 487 (temp & RH_PS_LSDA) ? " LSDA" : "", 488 (temp & RH_PS_PPS) ? " PPS" : "", 489 (temp & RH_PS_PRS) ? " PRS" : "", 490 (temp & RH_PS_POCI) ? " POCI" : "", 491 (temp & RH_PS_PSS) ? " PSS" : "", 492 493 (temp & RH_PS_PES) ? " PES" : "", 494 (temp & RH_PS_CCS) ? " CCS" : "" 495 ); 496 } 497 } 498 499 static void ohci_dump(ohci_t *controller, int verbose) 500 { 501 dbg("OHCI controller usb-%s state", controller->slot_name); 502 503 /* dumps some of the state we know about */ 504 ohci_dump_status(controller); 505 if (verbose) 506 ep_print_int_eds(controller, "hcca"); 507 invalidate_dcache_hcca(controller->hcca); 508 dbg("hcca frame #%04x", controller->hcca->frame_no); 509 ohci_dump_roothub(controller, 1); 510 } 511 #endif /* DEBUG */ 512 513 /*-------------------------------------------------------------------------* 514 * Interface functions (URB) 515 *-------------------------------------------------------------------------*/ 516 517 /* get a transfer request */ 518 519 int sohci_submit_job(ohci_t *ohci, ohci_dev_t *ohci_dev, urb_priv_t *urb, 520 struct devrequest *setup) 521 { 522 ed_t *ed; 523 urb_priv_t *purb_priv = urb; 524 int i, size = 0; 525 struct usb_device *dev = urb->dev; 526 unsigned long pipe = urb->pipe; 527 void *buffer = urb->transfer_buffer; 528 int transfer_len = urb->transfer_buffer_length; 529 int interval = urb->interval; 530 531 /* when controller's hung, permit only roothub cleanup attempts 532 * such as powering down ports */ 533 if (ohci->disabled) { 534 err("sohci_submit_job: EPIPE"); 535 return -1; 536 } 537 538 /* we're about to begin a new transaction here so mark the 539 * URB unfinished */ 540 urb->finished = 0; 541 542 /* every endpoint has a ed, locate and fill it */ 543 ed = ep_add_ed(ohci_dev, dev, pipe, interval, 1); 544 if (!ed) { 545 err("sohci_submit_job: ENOMEM"); 546 return -1; 547 } 548 549 /* for the private part of the URB we need the number of TDs (size) */ 550 switch (usb_pipetype(pipe)) { 551 case PIPE_BULK: /* one TD for every 4096 Byte */ 552 size = (transfer_len - 1) / 4096 + 1; 553 break; 554 case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ 555 size = (transfer_len == 0)? 2: 556 (transfer_len - 1) / 4096 + 3; 557 break; 558 case PIPE_INTERRUPT: /* 1 TD */ 559 size = 1; 560 break; 561 } 562 563 ed->purb = urb; 564 565 if (size >= (N_URB_TD - 1)) { 566 err("need %d TDs, only have %d", size, N_URB_TD); 567 return -1; 568 } 569 purb_priv->pipe = pipe; 570 571 /* fill the private part of the URB */ 572 purb_priv->length = size; 573 purb_priv->ed = ed; 574 purb_priv->actual_length = 0; 575 576 /* allocate the TDs */ 577 /* note that td[0] was allocated in ep_add_ed */ 578 for (i = 0; i < size; i++) { 579 purb_priv->td[i] = td_alloc(ohci_dev, dev); 580 if (!purb_priv->td[i]) { 581 purb_priv->length = i; 582 urb_free_priv(purb_priv); 583 err("sohci_submit_job: ENOMEM"); 584 return -1; 585 } 586 } 587 588 if (ed->state == ED_NEW || (ed->state & ED_DEL)) { 589 urb_free_priv(purb_priv); 590 err("sohci_submit_job: EINVAL"); 591 return -1; 592 } 593 594 /* link the ed into a chain if is not already */ 595 if (ed->state != ED_OPER) 596 ep_link(ohci, ed); 597 598 /* fill the TDs and link it to the ed */ 599 td_submit_job(ohci, dev, pipe, buffer, transfer_len, 600 setup, purb_priv, interval); 601 602 return 0; 603 } 604 605 /*-------------------------------------------------------------------------*/ 606 607 #ifdef DEBUG 608 /* tell us the current USB frame number */ 609 static int sohci_get_current_frame_number(ohci_t *ohci) 610 { 611 invalidate_dcache_hcca(ohci->hcca); 612 return m16_swap(ohci->hcca->frame_no); 613 } 614 #endif 615 616 /*-------------------------------------------------------------------------* 617 * ED handling functions 618 *-------------------------------------------------------------------------*/ 619 620 /* search for the right branch to insert an interrupt ed into the int tree 621 * do some load ballancing; 622 * returns the branch and 623 * sets the interval to interval = 2^integer (ld (interval)) */ 624 625 static int ep_int_ballance(ohci_t *ohci, int interval, int load) 626 { 627 int i, branch = 0; 628 629 /* search for the least loaded interrupt endpoint 630 * branch of all 32 branches 631 */ 632 for (i = 0; i < 32; i++) 633 if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i]) 634 branch = i; 635 636 branch = branch % interval; 637 for (i = branch; i < 32; i += interval) 638 ohci->ohci_int_load [i] += load; 639 640 return branch; 641 } 642 643 /*-------------------------------------------------------------------------*/ 644 645 /* 2^int( ld (inter)) */ 646 647 static int ep_2_n_interval(int inter) 648 { 649 int i; 650 for (i = 0; ((inter >> i) > 1) && (i < 5); i++); 651 return 1 << i; 652 } 653 654 /*-------------------------------------------------------------------------*/ 655 656 /* the int tree is a binary tree 657 * in order to process it sequentially the indexes of the branches have to 658 * be mapped the mapping reverses the bits of a word of num_bits length */ 659 static int ep_rev(int num_bits, int word) 660 { 661 int i, wout = 0; 662 663 for (i = 0; i < num_bits; i++) 664 wout |= (((word >> i) & 1) << (num_bits - i - 1)); 665 return wout; 666 } 667 668 /*-------------------------------------------------------------------------* 669 * ED handling functions 670 *-------------------------------------------------------------------------*/ 671 672 /* link an ed into one of the HC chains */ 673 674 static int ep_link(ohci_t *ohci, ed_t *edi) 675 { 676 volatile ed_t *ed = edi; 677 int int_branch; 678 int i; 679 int inter; 680 int interval; 681 int load; 682 __u32 *ed_p; 683 684 ed->state = ED_OPER; 685 ed->int_interval = 0; 686 687 switch (ed->type) { 688 case PIPE_CONTROL: 689 ed->hwNextED = 0; 690 flush_dcache_ed(ed); 691 if (ohci->ed_controltail == NULL) 692 ohci_writel(ed, &ohci->regs->ed_controlhead); 693 else 694 ohci->ed_controltail->hwNextED = 695 m32_swap((unsigned long)ed); 696 697 ed->ed_prev = ohci->ed_controltail; 698 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && 699 !ohci->ed_rm_list[1] && !ohci->sleeping) { 700 ohci->hc_control |= OHCI_CTRL_CLE; 701 ohci_writel(ohci->hc_control, &ohci->regs->control); 702 } 703 ohci->ed_controltail = edi; 704 break; 705 706 case PIPE_BULK: 707 ed->hwNextED = 0; 708 flush_dcache_ed(ed); 709 if (ohci->ed_bulktail == NULL) 710 ohci_writel(ed, &ohci->regs->ed_bulkhead); 711 else 712 ohci->ed_bulktail->hwNextED = 713 m32_swap((unsigned long)ed); 714 715 ed->ed_prev = ohci->ed_bulktail; 716 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && 717 !ohci->ed_rm_list[1] && !ohci->sleeping) { 718 ohci->hc_control |= OHCI_CTRL_BLE; 719 ohci_writel(ohci->hc_control, &ohci->regs->control); 720 } 721 ohci->ed_bulktail = edi; 722 break; 723 724 case PIPE_INTERRUPT: 725 load = ed->int_load; 726 interval = ep_2_n_interval(ed->int_period); 727 ed->int_interval = interval; 728 int_branch = ep_int_ballance(ohci, interval, load); 729 ed->int_branch = int_branch; 730 731 for (i = 0; i < ep_rev(6, interval); i += inter) { 732 inter = 1; 733 for (ed_p = &(ohci->hcca->int_table[\ 734 ep_rev(5, i) + int_branch]); 735 (*ed_p != 0) && 736 (((ed_t *)ed_p)->int_interval >= interval); 737 ed_p = &(((ed_t *)ed_p)->hwNextED)) 738 inter = ep_rev(6, 739 ((ed_t *)ed_p)->int_interval); 740 ed->hwNextED = *ed_p; 741 flush_dcache_ed(ed); 742 *ed_p = m32_swap((unsigned long)ed); 743 flush_dcache_hcca(ohci->hcca); 744 } 745 break; 746 } 747 return 0; 748 } 749 750 /*-------------------------------------------------------------------------*/ 751 752 /* scan the periodic table to find and unlink this ED */ 753 static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed, 754 unsigned index, unsigned period) 755 { 756 __maybe_unused unsigned long aligned_ed_p; 757 758 for (; index < NUM_INTS; index += period) { 759 __u32 *ed_p = &ohci->hcca->int_table [index]; 760 761 /* ED might have been unlinked through another path */ 762 while (*ed_p != 0) { 763 if (((struct ed *) 764 m32_swap((unsigned long)ed_p)) == ed) { 765 *ed_p = ed->hwNextED; 766 #ifdef CONFIG_DM_USB 767 aligned_ed_p = (unsigned long)ed_p; 768 aligned_ed_p &= ~(ARCH_DMA_MINALIGN - 1); 769 flush_dcache_range(aligned_ed_p, 770 aligned_ed_p + ARCH_DMA_MINALIGN); 771 #endif 772 break; 773 } 774 ed_p = &(((struct ed *) 775 m32_swap((unsigned long)ed_p))->hwNextED); 776 } 777 } 778 } 779 780 /* unlink an ed from one of the HC chains. 781 * just the link to the ed is unlinked. 782 * the link from the ed still points to another operational ed or 0 783 * so the HC can eventually finish the processing of the unlinked ed */ 784 785 static int ep_unlink(ohci_t *ohci, ed_t *edi) 786 { 787 volatile ed_t *ed = edi; 788 int i; 789 790 ed->hwINFO |= m32_swap(OHCI_ED_SKIP); 791 flush_dcache_ed(ed); 792 793 switch (ed->type) { 794 case PIPE_CONTROL: 795 if (ed->ed_prev == NULL) { 796 if (!ed->hwNextED) { 797 ohci->hc_control &= ~OHCI_CTRL_CLE; 798 ohci_writel(ohci->hc_control, 799 &ohci->regs->control); 800 } 801 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)), 802 &ohci->regs->ed_controlhead); 803 } else { 804 ed->ed_prev->hwNextED = ed->hwNextED; 805 flush_dcache_ed(ed->ed_prev); 806 } 807 if (ohci->ed_controltail == ed) { 808 ohci->ed_controltail = ed->ed_prev; 809 } else { 810 ((ed_t *)m32_swap( 811 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; 812 } 813 break; 814 815 case PIPE_BULK: 816 if (ed->ed_prev == NULL) { 817 if (!ed->hwNextED) { 818 ohci->hc_control &= ~OHCI_CTRL_BLE; 819 ohci_writel(ohci->hc_control, 820 &ohci->regs->control); 821 } 822 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)), 823 &ohci->regs->ed_bulkhead); 824 } else { 825 ed->ed_prev->hwNextED = ed->hwNextED; 826 flush_dcache_ed(ed->ed_prev); 827 } 828 if (ohci->ed_bulktail == ed) { 829 ohci->ed_bulktail = ed->ed_prev; 830 } else { 831 ((ed_t *)m32_swap( 832 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; 833 } 834 break; 835 836 case PIPE_INTERRUPT: 837 periodic_unlink(ohci, ed, 0, 1); 838 for (i = ed->int_branch; i < 32; i += ed->int_interval) 839 ohci->ohci_int_load[i] -= ed->int_load; 840 break; 841 } 842 ed->state = ED_UNLINK; 843 return 0; 844 } 845 846 /*-------------------------------------------------------------------------*/ 847 848 /* add/reinit an endpoint; this should be done once at the 849 * usb_set_configuration command, but the USB stack is a little bit 850 * stateless so we do it at every transaction if the state of the ed 851 * is ED_NEW then a dummy td is added and the state is changed to 852 * ED_UNLINK in all other cases the state is left unchanged the ed 853 * info fields are setted anyway even though most of them should not 854 * change 855 */ 856 static ed_t *ep_add_ed(ohci_dev_t *ohci_dev, struct usb_device *usb_dev, 857 unsigned long pipe, int interval, int load) 858 { 859 td_t *td; 860 ed_t *ed_ret; 861 volatile ed_t *ed; 862 863 ed = ed_ret = &ohci_dev->ed[(usb_pipeendpoint(pipe) << 1) | 864 (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))]; 865 866 if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { 867 err("ep_add_ed: pending delete"); 868 /* pending delete request */ 869 return NULL; 870 } 871 872 if (ed->state == ED_NEW) { 873 /* dummy td; end of td list for ed */ 874 td = td_alloc(ohci_dev, usb_dev); 875 ed->hwTailP = m32_swap((unsigned long)td); 876 ed->hwHeadP = ed->hwTailP; 877 ed->state = ED_UNLINK; 878 ed->type = usb_pipetype(pipe); 879 ohci_dev->ed_cnt++; 880 } 881 882 ed->hwINFO = m32_swap(usb_pipedevice(pipe) 883 | usb_pipeendpoint(pipe) << 7 884 | (usb_pipeisoc(pipe)? 0x8000: 0) 885 | (usb_pipecontrol(pipe)? 0: \ 886 (usb_pipeout(pipe)? 0x800: 0x1000)) 887 | (usb_dev->speed == USB_SPEED_LOW) << 13 888 | usb_maxpacket(usb_dev, pipe) << 16); 889 890 if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) { 891 ed->int_period = interval; 892 ed->int_load = load; 893 } 894 895 flush_dcache_ed(ed); 896 897 return ed_ret; 898 } 899 900 /*-------------------------------------------------------------------------* 901 * TD handling functions 902 *-------------------------------------------------------------------------*/ 903 904 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ 905 906 static void td_fill(ohci_t *ohci, unsigned int info, 907 void *data, int len, 908 struct usb_device *dev, int index, urb_priv_t *urb_priv) 909 { 910 volatile td_t *td, *td_pt; 911 #ifdef OHCI_FILL_TRACE 912 int i; 913 #endif 914 915 if (index > urb_priv->length) { 916 err("index > length"); 917 return; 918 } 919 /* use this td as the next dummy */ 920 td_pt = urb_priv->td [index]; 921 td_pt->hwNextTD = 0; 922 flush_dcache_td(td_pt); 923 924 /* fill the old dummy TD */ 925 td = urb_priv->td [index] = 926 (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf); 927 928 td->ed = urb_priv->ed; 929 td->next_dl_td = NULL; 930 td->index = index; 931 td->data = (__u32)data; 932 #ifdef OHCI_FILL_TRACE 933 if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) { 934 for (i = 0; i < len; i++) 935 printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]); 936 printf("\n"); 937 } 938 #endif 939 if (!len) 940 data = 0; 941 942 td->hwINFO = m32_swap(info); 943 td->hwCBP = m32_swap((unsigned long)data); 944 if (data) 945 td->hwBE = m32_swap((unsigned long)(data + len - 1)); 946 else 947 td->hwBE = 0; 948 949 td->hwNextTD = m32_swap((unsigned long)td_pt); 950 flush_dcache_td(td); 951 952 /* append to queue */ 953 td->ed->hwTailP = td->hwNextTD; 954 flush_dcache_ed(td->ed); 955 } 956 957 /*-------------------------------------------------------------------------*/ 958 959 /* prepare all TDs of a transfer */ 960 961 static void td_submit_job(ohci_t *ohci, struct usb_device *dev, 962 unsigned long pipe, void *buffer, int transfer_len, 963 struct devrequest *setup, urb_priv_t *urb, 964 int interval) 965 { 966 int data_len = transfer_len; 967 void *data; 968 int cnt = 0; 969 __u32 info = 0; 970 unsigned int toggle = 0; 971 972 flush_dcache_buffer(buffer, data_len); 973 974 /* OHCI handles the DATA-toggles itself, we just use the USB-toggle 975 * bits for reseting */ 976 if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { 977 toggle = TD_T_TOGGLE; 978 } else { 979 toggle = TD_T_DATA0; 980 usb_settoggle(dev, usb_pipeendpoint(pipe), 981 usb_pipeout(pipe), 1); 982 } 983 urb->td_cnt = 0; 984 if (data_len) 985 data = buffer; 986 else 987 data = 0; 988 989 switch (usb_pipetype(pipe)) { 990 case PIPE_BULK: 991 info = usb_pipeout(pipe)? 992 TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; 993 while (data_len > 4096) { 994 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), 995 data, 4096, dev, cnt, urb); 996 data += 4096; data_len -= 4096; cnt++; 997 } 998 info = usb_pipeout(pipe)? 999 TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; 1000 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 1001 data_len, dev, cnt, urb); 1002 cnt++; 1003 1004 if (!ohci->sleeping) { 1005 /* start bulk list */ 1006 ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus); 1007 } 1008 break; 1009 1010 case PIPE_CONTROL: 1011 /* Setup phase */ 1012 info = TD_CC | TD_DP_SETUP | TD_T_DATA0; 1013 flush_dcache_buffer(setup, 8); 1014 td_fill(ohci, info, setup, 8, dev, cnt++, urb); 1015 1016 /* Optional Data phase */ 1017 if (data_len > 0) { 1018 info = usb_pipeout(pipe)? 1019 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : 1020 TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; 1021 /* NOTE: mishandles transfers >8K, some >4K */ 1022 td_fill(ohci, info, data, data_len, dev, cnt++, urb); 1023 } 1024 1025 /* Status phase */ 1026 info = (usb_pipeout(pipe) || data_len == 0) ? 1027 TD_CC | TD_DP_IN | TD_T_DATA1: 1028 TD_CC | TD_DP_OUT | TD_T_DATA1; 1029 td_fill(ohci, info, data, 0, dev, cnt++, urb); 1030 1031 if (!ohci->sleeping) { 1032 /* start Control list */ 1033 ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus); 1034 } 1035 break; 1036 1037 case PIPE_INTERRUPT: 1038 info = usb_pipeout(urb->pipe)? 1039 TD_CC | TD_DP_OUT | toggle: 1040 TD_CC | TD_R | TD_DP_IN | toggle; 1041 td_fill(ohci, info, data, data_len, dev, cnt++, urb); 1042 break; 1043 } 1044 if (urb->length != cnt) 1045 dbg("TD LENGTH %d != CNT %d", urb->length, cnt); 1046 } 1047 1048 /*-------------------------------------------------------------------------* 1049 * Done List handling functions 1050 *-------------------------------------------------------------------------*/ 1051 1052 /* calculate the transfer length and update the urb */ 1053 1054 static void dl_transfer_length(td_t *td) 1055 { 1056 __u32 tdBE, tdCBP; 1057 urb_priv_t *lurb_priv = td->ed->purb; 1058 1059 tdBE = m32_swap(td->hwBE); 1060 tdCBP = m32_swap(td->hwCBP); 1061 1062 if (!(usb_pipecontrol(lurb_priv->pipe) && 1063 ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { 1064 if (tdBE != 0) { 1065 if (td->hwCBP == 0) 1066 lurb_priv->actual_length += tdBE - td->data + 1; 1067 else 1068 lurb_priv->actual_length += tdCBP - td->data; 1069 } 1070 } 1071 } 1072 1073 /*-------------------------------------------------------------------------*/ 1074 static void check_status(td_t *td_list) 1075 { 1076 urb_priv_t *lurb_priv = td_list->ed->purb; 1077 int urb_len = lurb_priv->length; 1078 __u32 *phwHeadP = &td_list->ed->hwHeadP; 1079 int cc; 1080 1081 cc = TD_CC_GET(m32_swap(td_list->hwINFO)); 1082 if (cc) { 1083 err(" USB-error: %s (%x)", cc_to_string[cc], cc); 1084 1085 invalidate_dcache_ed(td_list->ed); 1086 if (*phwHeadP & m32_swap(0x1)) { 1087 if (lurb_priv && 1088 ((td_list->index + 1) < urb_len)) { 1089 *phwHeadP = 1090 (lurb_priv->td[urb_len - 1]->hwNextTD &\ 1091 m32_swap(0xfffffff0)) | 1092 (*phwHeadP & m32_swap(0x2)); 1093 1094 lurb_priv->td_cnt += urb_len - 1095 td_list->index - 1; 1096 } else 1097 *phwHeadP &= m32_swap(0xfffffff2); 1098 flush_dcache_ed(td_list->ed); 1099 } 1100 #ifdef CONFIG_MPC5200 1101 td_list->hwNextTD = 0; 1102 flush_dcache_td(td_list); 1103 #endif 1104 } 1105 } 1106 1107 /* replies to the request have to be on a FIFO basis so 1108 * we reverse the reversed done-list */ 1109 static td_t *dl_reverse_done_list(ohci_t *ohci) 1110 { 1111 __u32 td_list_hc; 1112 td_t *td_rev = NULL; 1113 td_t *td_list = NULL; 1114 1115 invalidate_dcache_hcca(ohci->hcca); 1116 td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0; 1117 ohci->hcca->done_head = 0; 1118 flush_dcache_hcca(ohci->hcca); 1119 1120 while (td_list_hc) { 1121 td_list = (td_t *)td_list_hc; 1122 invalidate_dcache_td(td_list); 1123 check_status(td_list); 1124 td_list->next_dl_td = td_rev; 1125 td_rev = td_list; 1126 td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0; 1127 } 1128 return td_list; 1129 } 1130 1131 /*-------------------------------------------------------------------------*/ 1132 /*-------------------------------------------------------------------------*/ 1133 1134 static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status) 1135 { 1136 if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL)) 1137 urb->finished = 1; 1138 else 1139 dbg("finish_urb: strange.., ED state %x, \n", status); 1140 } 1141 1142 /* 1143 * Used to take back a TD from the host controller. This would normally be 1144 * called from within dl_done_list, however it may be called directly if the 1145 * HC no longer sees the TD and it has not appeared on the donelist (after 1146 * two frames). This bug has been observed on ZF Micro systems. 1147 */ 1148 static int takeback_td(ohci_t *ohci, td_t *td_list) 1149 { 1150 ed_t *ed; 1151 int cc; 1152 int stat = 0; 1153 /* urb_t *urb; */ 1154 urb_priv_t *lurb_priv; 1155 __u32 tdINFO, edHeadP, edTailP; 1156 1157 invalidate_dcache_td(td_list); 1158 tdINFO = m32_swap(td_list->hwINFO); 1159 1160 ed = td_list->ed; 1161 lurb_priv = ed->purb; 1162 1163 dl_transfer_length(td_list); 1164 1165 lurb_priv->td_cnt++; 1166 1167 /* error code of transfer */ 1168 cc = TD_CC_GET(tdINFO); 1169 if (cc) { 1170 err("USB-error: %s (%x)", cc_to_string[cc], cc); 1171 stat = cc_to_error[cc]; 1172 } 1173 1174 /* see if this done list makes for all TD's of current URB, 1175 * and mark the URB finished if so */ 1176 if (lurb_priv->td_cnt == lurb_priv->length) 1177 finish_urb(ohci, lurb_priv, ed->state); 1178 1179 dbg("dl_done_list: processing TD %x, len %x\n", 1180 lurb_priv->td_cnt, lurb_priv->length); 1181 1182 if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) { 1183 invalidate_dcache_ed(ed); 1184 edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0; 1185 edTailP = m32_swap(ed->hwTailP); 1186 1187 /* unlink eds if they are not busy */ 1188 if ((edHeadP == edTailP) && (ed->state == ED_OPER)) 1189 ep_unlink(ohci, ed); 1190 } 1191 return stat; 1192 } 1193 1194 static int dl_done_list(ohci_t *ohci) 1195 { 1196 int stat = 0; 1197 td_t *td_list = dl_reverse_done_list(ohci); 1198 1199 while (td_list) { 1200 td_t *td_next = td_list->next_dl_td; 1201 stat = takeback_td(ohci, td_list); 1202 td_list = td_next; 1203 } 1204 return stat; 1205 } 1206 1207 /*-------------------------------------------------------------------------* 1208 * Virtual Root Hub 1209 *-------------------------------------------------------------------------*/ 1210 1211 #include <usbroothubdes.h> 1212 1213 /* Hub class-specific descriptor is constructed dynamically */ 1214 1215 /*-------------------------------------------------------------------------*/ 1216 1217 #define OK(x) len = (x); break 1218 #ifdef DEBUG 1219 #define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \ 1220 &ohci->regs->roothub.status); } 1221 #define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \ 1222 (x)); ohci_writel((x), &ohci->regs->roothub.portstatus[wIndex-1]); } 1223 #else 1224 #define WR_RH_STAT(x) ohci_writel((x), &ohci->regs->roothub.status) 1225 #define WR_RH_PORTSTAT(x) ohci_writel((x), \ 1226 &ohci->regs->roothub.portstatus[wIndex-1]) 1227 #endif 1228 #define RD_RH_STAT roothub_status(ohci) 1229 #define RD_RH_PORTSTAT roothub_portstatus(ohci, wIndex-1) 1230 1231 /* request to virtual root hub */ 1232 1233 int rh_check_port_status(ohci_t *controller) 1234 { 1235 __u32 temp, ndp, i; 1236 int res; 1237 1238 res = -1; 1239 temp = roothub_a(controller); 1240 ndp = (temp & RH_A_NDP); 1241 #ifdef CONFIG_AT91C_PQFP_UHPBUG 1242 ndp = (ndp == 2) ? 1:0; 1243 #endif 1244 for (i = 0; i < ndp; i++) { 1245 temp = roothub_portstatus(controller, i); 1246 /* check for a device disconnect */ 1247 if (((temp & (RH_PS_PESC | RH_PS_CSC)) == 1248 (RH_PS_PESC | RH_PS_CSC)) && 1249 ((temp & RH_PS_CCS) == 0)) { 1250 res = i; 1251 break; 1252 } 1253 } 1254 return res; 1255 } 1256 1257 static int ohci_submit_rh_msg(ohci_t *ohci, struct usb_device *dev, 1258 unsigned long pipe, void *buffer, int transfer_len, 1259 struct devrequest *cmd) 1260 { 1261 void *data = buffer; 1262 int leni = transfer_len; 1263 int len = 0; 1264 int stat = 0; 1265 __u16 bmRType_bReq; 1266 __u16 wValue; 1267 __u16 wIndex; 1268 __u16 wLength; 1269 ALLOC_ALIGN_BUFFER(__u8, databuf, 16, sizeof(u32)); 1270 1271 #ifdef DEBUG 1272 pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len, 1273 cmd, "SUB(rh)", usb_pipein(pipe)); 1274 #else 1275 ohci_mdelay(1); 1276 #endif 1277 if (usb_pipeint(pipe)) { 1278 info("Root-Hub submit IRQ: NOT implemented"); 1279 return 0; 1280 } 1281 1282 bmRType_bReq = cmd->requesttype | (cmd->request << 8); 1283 wValue = le16_to_cpu(cmd->value); 1284 wIndex = le16_to_cpu(cmd->index); 1285 wLength = le16_to_cpu(cmd->length); 1286 1287 info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", 1288 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); 1289 1290 switch (bmRType_bReq) { 1291 /* Request Destination: 1292 without flags: Device, 1293 RH_INTERFACE: interface, 1294 RH_ENDPOINT: endpoint, 1295 RH_CLASS means HUB here, 1296 RH_OTHER | RH_CLASS almost ever means HUB_PORT here 1297 */ 1298 1299 case RH_GET_STATUS: 1300 *(u16 *)databuf = cpu_to_le16(1); 1301 OK(2); 1302 case RH_GET_STATUS | RH_INTERFACE: 1303 *(u16 *)databuf = cpu_to_le16(0); 1304 OK(2); 1305 case RH_GET_STATUS | RH_ENDPOINT: 1306 *(u16 *)databuf = cpu_to_le16(0); 1307 OK(2); 1308 case RH_GET_STATUS | RH_CLASS: 1309 *(u32 *)databuf = cpu_to_le32( 1310 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); 1311 OK(4); 1312 case RH_GET_STATUS | RH_OTHER | RH_CLASS: 1313 *(u32 *)databuf = cpu_to_le32(RD_RH_PORTSTAT); 1314 OK(4); 1315 1316 case RH_CLEAR_FEATURE | RH_ENDPOINT: 1317 switch (wValue) { 1318 case (RH_ENDPOINT_STALL): 1319 OK(0); 1320 } 1321 break; 1322 1323 case RH_CLEAR_FEATURE | RH_CLASS: 1324 switch (wValue) { 1325 case RH_C_HUB_LOCAL_POWER: 1326 OK(0); 1327 case (RH_C_HUB_OVER_CURRENT): 1328 WR_RH_STAT(RH_HS_OCIC); 1329 OK(0); 1330 } 1331 break; 1332 1333 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: 1334 switch (wValue) { 1335 case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0); 1336 case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0); 1337 case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0); 1338 case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0); 1339 case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0); 1340 case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0); 1341 case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0); 1342 case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0); 1343 } 1344 break; 1345 1346 case RH_SET_FEATURE | RH_OTHER | RH_CLASS: 1347 switch (wValue) { 1348 case (RH_PORT_SUSPEND): 1349 WR_RH_PORTSTAT(RH_PS_PSS); OK(0); 1350 case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ 1351 if (RD_RH_PORTSTAT & RH_PS_CCS) 1352 WR_RH_PORTSTAT(RH_PS_PRS); 1353 OK(0); 1354 case (RH_PORT_POWER): 1355 WR_RH_PORTSTAT(RH_PS_PPS); 1356 OK(0); 1357 case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ 1358 if (RD_RH_PORTSTAT & RH_PS_CCS) 1359 WR_RH_PORTSTAT(RH_PS_PES); 1360 OK(0); 1361 } 1362 break; 1363 1364 case RH_SET_ADDRESS: 1365 ohci->rh.devnum = wValue; 1366 OK(0); 1367 1368 case RH_GET_DESCRIPTOR: 1369 switch ((wValue & 0xff00) >> 8) { 1370 case (0x01): /* device descriptor */ 1371 len = min_t(unsigned int, 1372 leni, 1373 min_t(unsigned int, 1374 sizeof(root_hub_dev_des), 1375 wLength)); 1376 databuf = root_hub_dev_des; OK(len); 1377 case (0x02): /* configuration descriptor */ 1378 len = min_t(unsigned int, 1379 leni, 1380 min_t(unsigned int, 1381 sizeof(root_hub_config_des), 1382 wLength)); 1383 databuf = root_hub_config_des; OK(len); 1384 case (0x03): /* string descriptors */ 1385 if (wValue == 0x0300) { 1386 len = min_t(unsigned int, 1387 leni, 1388 min_t(unsigned int, 1389 sizeof(root_hub_str_index0), 1390 wLength)); 1391 databuf = root_hub_str_index0; 1392 OK(len); 1393 } 1394 if (wValue == 0x0301) { 1395 len = min_t(unsigned int, 1396 leni, 1397 min_t(unsigned int, 1398 sizeof(root_hub_str_index1), 1399 wLength)); 1400 databuf = root_hub_str_index1; 1401 OK(len); 1402 } 1403 default: 1404 stat = USB_ST_STALLED; 1405 } 1406 break; 1407 1408 case RH_GET_DESCRIPTOR | RH_CLASS: 1409 { 1410 __u32 temp = roothub_a(ohci); 1411 1412 databuf[0] = 9; /* min length; */ 1413 databuf[1] = 0x29; 1414 databuf[2] = temp & RH_A_NDP; 1415 #ifdef CONFIG_AT91C_PQFP_UHPBUG 1416 databuf[2] = (databuf[2] == 2) ? 1 : 0; 1417 #endif 1418 databuf[3] = 0; 1419 if (temp & RH_A_PSM) /* per-port power switching? */ 1420 databuf[3] |= 0x1; 1421 if (temp & RH_A_NOCP) /* no overcurrent reporting? */ 1422 databuf[3] |= 0x10; 1423 else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */ 1424 databuf[3] |= 0x8; 1425 1426 databuf[4] = 0; 1427 databuf[5] = (temp & RH_A_POTPGT) >> 24; 1428 databuf[6] = 0; 1429 temp = roothub_b(ohci); 1430 databuf[7] = temp & RH_B_DR; 1431 if (databuf[2] < 7) { 1432 databuf[8] = 0xff; 1433 } else { 1434 databuf[0] += 2; 1435 databuf[8] = (temp & RH_B_DR) >> 8; 1436 databuf[10] = databuf[9] = 0xff; 1437 } 1438 1439 len = min_t(unsigned int, leni, 1440 min_t(unsigned int, databuf[0], wLength)); 1441 OK(len); 1442 } 1443 1444 case RH_GET_CONFIGURATION: 1445 databuf[0] = 0x01; 1446 OK(1); 1447 1448 case RH_SET_CONFIGURATION: 1449 WR_RH_STAT(0x10000); 1450 OK(0); 1451 1452 default: 1453 dbg("unsupported root hub command"); 1454 stat = USB_ST_STALLED; 1455 } 1456 1457 #ifdef DEBUG 1458 ohci_dump_roothub(ohci, 1); 1459 #else 1460 ohci_mdelay(1); 1461 #endif 1462 1463 len = min_t(int, len, leni); 1464 if (data != databuf) 1465 memcpy(data, databuf, len); 1466 dev->act_len = len; 1467 dev->status = stat; 1468 1469 #ifdef DEBUG 1470 pkt_print(ohci, NULL, dev, pipe, buffer, 1471 transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); 1472 #else 1473 ohci_mdelay(1); 1474 #endif 1475 1476 return stat; 1477 } 1478 1479 /*-------------------------------------------------------------------------*/ 1480 1481 static ohci_dev_t *ohci_get_ohci_dev(ohci_t *ohci, int devnum, int intr) 1482 { 1483 int i; 1484 1485 if (!intr) 1486 return &ohci->ohci_dev; 1487 1488 /* First see if we already have an ohci_dev for this dev. */ 1489 for (i = 0; i < NUM_INT_DEVS; i++) { 1490 if (ohci->int_dev[i].devnum == devnum) 1491 return &ohci->int_dev[i]; 1492 } 1493 1494 /* If not then find a free one. */ 1495 for (i = 0; i < NUM_INT_DEVS; i++) { 1496 if (ohci->int_dev[i].devnum == -1) { 1497 ohci->int_dev[i].devnum = devnum; 1498 return &ohci->int_dev[i]; 1499 } 1500 } 1501 1502 printf("ohci: Error out of ohci_devs for interrupt endpoints\n"); 1503 return NULL; 1504 } 1505 1506 /* common code for handling submit messages - used for all but root hub */ 1507 /* accesses. */ 1508 static int submit_common_msg(ohci_t *ohci, struct usb_device *dev, 1509 unsigned long pipe, void *buffer, int transfer_len, 1510 struct devrequest *setup, int interval) 1511 { 1512 int stat = 0; 1513 int maxsize = usb_maxpacket(dev, pipe); 1514 int timeout; 1515 urb_priv_t *urb; 1516 ohci_dev_t *ohci_dev; 1517 1518 urb = malloc(sizeof(urb_priv_t)); 1519 memset(urb, 0, sizeof(urb_priv_t)); 1520 1521 urb->dev = dev; 1522 urb->pipe = pipe; 1523 urb->transfer_buffer = buffer; 1524 urb->transfer_buffer_length = transfer_len; 1525 urb->interval = interval; 1526 1527 #ifdef DEBUG 1528 urb->actual_length = 0; 1529 pkt_print(ohci, urb, dev, pipe, buffer, transfer_len, 1530 setup, "SUB", usb_pipein(pipe)); 1531 #else 1532 ohci_mdelay(1); 1533 #endif 1534 if (!maxsize) { 1535 err("submit_common_message: pipesize for pipe %lx is zero", 1536 pipe); 1537 return -1; 1538 } 1539 1540 ohci_dev = ohci_get_ohci_dev(ohci, dev->devnum, usb_pipeint(pipe)); 1541 if (!ohci_dev) 1542 return -ENOMEM; 1543 1544 if (sohci_submit_job(ohci, ohci_dev, urb, setup) < 0) { 1545 err("sohci_submit_job failed"); 1546 return -1; 1547 } 1548 1549 #if 0 1550 mdelay(10); 1551 /* ohci_dump_status(ohci); */ 1552 #endif 1553 1554 timeout = USB_TIMEOUT_MS(pipe); 1555 1556 /* wait for it to complete */ 1557 for (;;) { 1558 /* check whether the controller is done */ 1559 stat = hc_interrupt(ohci); 1560 if (stat < 0) { 1561 stat = USB_ST_CRC_ERR; 1562 break; 1563 } 1564 1565 /* NOTE: since we are not interrupt driven in U-Boot and always 1566 * handle only one URB at a time, we cannot assume the 1567 * transaction finished on the first successful return from 1568 * hc_interrupt().. unless the flag for current URB is set, 1569 * meaning that all TD's to/from device got actually 1570 * transferred and processed. If the current URB is not 1571 * finished we need to re-iterate this loop so as 1572 * hc_interrupt() gets called again as there needs to be some 1573 * more TD's to process still */ 1574 if ((stat >= 0) && (stat != 0xff) && (urb->finished)) { 1575 /* 0xff is returned for an SF-interrupt */ 1576 break; 1577 } 1578 1579 if (--timeout) { 1580 mdelay(1); 1581 if (!urb->finished) 1582 dbg("*"); 1583 1584 } else { 1585 if (!usb_pipeint(pipe)) 1586 err("CTL:TIMEOUT "); 1587 dbg("submit_common_msg: TO status %x\n", stat); 1588 urb->finished = 1; 1589 stat = USB_ST_CRC_ERR; 1590 break; 1591 } 1592 } 1593 1594 dev->status = stat; 1595 dev->act_len = urb->actual_length; 1596 1597 if (usb_pipein(pipe) && dev->status == 0 && dev->act_len) 1598 invalidate_dcache_buffer(buffer, dev->act_len); 1599 1600 #ifdef DEBUG 1601 pkt_print(ohci, urb, dev, pipe, buffer, transfer_len, 1602 setup, "RET(ctlr)", usb_pipein(pipe)); 1603 #else 1604 ohci_mdelay(1); 1605 #endif 1606 urb_free_priv(urb); 1607 return 0; 1608 } 1609 1610 #ifndef CONFIG_DM_USB 1611 /* submit routines called from usb.c */ 1612 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1613 int transfer_len) 1614 { 1615 info("submit_bulk_msg"); 1616 return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len, 1617 NULL, 0); 1618 } 1619 1620 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 1621 int transfer_len, int interval) 1622 { 1623 info("submit_int_msg"); 1624 return submit_common_msg(&gohci, dev, pipe, buffer, transfer_len, NULL, 1625 interval); 1626 } 1627 #endif 1628 1629 static int _ohci_submit_control_msg(ohci_t *ohci, struct usb_device *dev, 1630 unsigned long pipe, void *buffer, int transfer_len, 1631 struct devrequest *setup) 1632 { 1633 int maxsize = usb_maxpacket(dev, pipe); 1634 1635 info("submit_control_msg"); 1636 #ifdef DEBUG 1637 pkt_print(ohci, NULL, dev, pipe, buffer, transfer_len, 1638 setup, "SUB", usb_pipein(pipe)); 1639 #else 1640 ohci_mdelay(1); 1641 #endif 1642 if (!maxsize) { 1643 err("submit_control_message: pipesize for pipe %lx is zero", 1644 pipe); 1645 return -1; 1646 } 1647 if (((pipe >> 8) & 0x7f) == ohci->rh.devnum) { 1648 ohci->rh.dev = dev; 1649 /* root hub - redirect */ 1650 return ohci_submit_rh_msg(ohci, dev, pipe, buffer, 1651 transfer_len, setup); 1652 } 1653 1654 return submit_common_msg(ohci, dev, pipe, buffer, transfer_len, 1655 setup, 0); 1656 } 1657 1658 /*-------------------------------------------------------------------------* 1659 * HC functions 1660 *-------------------------------------------------------------------------*/ 1661 1662 /* reset the HC and BUS */ 1663 1664 static int hc_reset(ohci_t *ohci) 1665 { 1666 #ifdef CONFIG_PCI_EHCI_DEVNO 1667 pci_dev_t pdev; 1668 #endif 1669 int timeout = 30; 1670 int smm_timeout = 50; /* 0,5 sec */ 1671 1672 dbg("%s\n", __FUNCTION__); 1673 1674 #ifdef CONFIG_PCI_EHCI_DEVNO 1675 /* 1676 * Some multi-function controllers (e.g. ISP1562) allow root hub 1677 * resetting via EHCI registers only. 1678 */ 1679 pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO); 1680 if (pdev != -1) { 1681 u32 base; 1682 int timeout = 1000; 1683 1684 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); 1685 base += EHCI_USBCMD_OFF; 1686 ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base); 1687 1688 while (ohci_readl(base) & EHCI_USBCMD_HCRESET) { 1689 if (timeout-- <= 0) { 1690 printf("USB RootHub reset timed out!"); 1691 break; 1692 } 1693 udelay(1); 1694 } 1695 } else 1696 printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO); 1697 #endif 1698 if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) { 1699 /* SMM owns the HC, request ownership */ 1700 ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus); 1701 info("USB HC TakeOver from SMM"); 1702 while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) { 1703 mdelay(10); 1704 if (--smm_timeout == 0) { 1705 err("USB HC TakeOver failed!"); 1706 return -1; 1707 } 1708 } 1709 } 1710 1711 /* Disable HC interrupts */ 1712 ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable); 1713 1714 dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n", 1715 ohci->slot_name, 1716 ohci_readl(&ohci->regs->control)); 1717 1718 /* Reset USB (needed by some controllers) */ 1719 ohci->hc_control = 0; 1720 ohci_writel(ohci->hc_control, &ohci->regs->control); 1721 1722 /* HC Reset requires max 10 us delay */ 1723 ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus); 1724 while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { 1725 if (--timeout == 0) { 1726 err("USB HC reset timed out!"); 1727 return -1; 1728 } 1729 udelay(1); 1730 } 1731 return 0; 1732 } 1733 1734 /*-------------------------------------------------------------------------*/ 1735 1736 /* Start an OHCI controller, set the BUS operational 1737 * enable interrupts 1738 * connect the virtual root hub */ 1739 1740 static int hc_start(ohci_t *ohci) 1741 { 1742 __u32 mask; 1743 unsigned int fminterval; 1744 int i; 1745 1746 ohci->disabled = 1; 1747 for (i = 0; i < NUM_INT_DEVS; i++) 1748 ohci->int_dev[i].devnum = -1; 1749 1750 /* Tell the controller where the control and bulk lists are 1751 * The lists are empty now. */ 1752 1753 ohci_writel(0, &ohci->regs->ed_controlhead); 1754 ohci_writel(0, &ohci->regs->ed_bulkhead); 1755 1756 ohci_writel((__u32)ohci->hcca, 1757 &ohci->regs->hcca); /* reset clears this */ 1758 1759 fminterval = 0x2edf; 1760 ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart); 1761 fminterval |= ((((fminterval - 210) * 6) / 7) << 16); 1762 ohci_writel(fminterval, &ohci->regs->fminterval); 1763 ohci_writel(0x628, &ohci->regs->lsthresh); 1764 1765 /* start controller operations */ 1766 ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; 1767 ohci->disabled = 0; 1768 ohci_writel(ohci->hc_control, &ohci->regs->control); 1769 1770 /* disable all interrupts */ 1771 mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | 1772 OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | 1773 OHCI_INTR_OC | OHCI_INTR_MIE); 1774 ohci_writel(mask, &ohci->regs->intrdisable); 1775 /* clear all interrupts */ 1776 mask &= ~OHCI_INTR_MIE; 1777 ohci_writel(mask, &ohci->regs->intrstatus); 1778 /* Choose the interrupts we care about now - but w/o MIE */ 1779 mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; 1780 ohci_writel(mask, &ohci->regs->intrenable); 1781 1782 #ifdef OHCI_USE_NPS 1783 /* required for AMD-756 and some Mac platforms */ 1784 ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM, 1785 &ohci->regs->roothub.a); 1786 ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status); 1787 #endif /* OHCI_USE_NPS */ 1788 1789 /* connect the virtual root hub */ 1790 ohci->rh.devnum = 0; 1791 1792 return 0; 1793 } 1794 1795 /*-------------------------------------------------------------------------*/ 1796 1797 /* an interrupt happens */ 1798 1799 static int hc_interrupt(ohci_t *ohci) 1800 { 1801 struct ohci_regs *regs = ohci->regs; 1802 int ints; 1803 int stat = -1; 1804 1805 invalidate_dcache_hcca(ohci->hcca); 1806 1807 if ((ohci->hcca->done_head != 0) && 1808 !(m32_swap(ohci->hcca->done_head) & 0x01)) { 1809 ints = OHCI_INTR_WDH; 1810 } else { 1811 ints = ohci_readl(®s->intrstatus); 1812 if (ints == ~(u32)0) { 1813 ohci->disabled++; 1814 err("%s device removed!", ohci->slot_name); 1815 return -1; 1816 } else { 1817 ints &= ohci_readl(®s->intrenable); 1818 if (ints == 0) { 1819 dbg("hc_interrupt: returning..\n"); 1820 return 0xff; 1821 } 1822 } 1823 } 1824 1825 /* dbg("Interrupt: %x frame: %x", ints, 1826 le16_to_cpu(ohci->hcca->frame_no)); */ 1827 1828 if (ints & OHCI_INTR_RHSC) 1829 stat = 0xff; 1830 1831 if (ints & OHCI_INTR_UE) { 1832 ohci->disabled++; 1833 err("OHCI Unrecoverable Error, controller usb-%s disabled", 1834 ohci->slot_name); 1835 /* e.g. due to PCI Master/Target Abort */ 1836 1837 #ifdef DEBUG 1838 ohci_dump(ohci, 1); 1839 #else 1840 ohci_mdelay(1); 1841 #endif 1842 /* FIXME: be optimistic, hope that bug won't repeat often. */ 1843 /* Make some non-interrupt context restart the controller. */ 1844 /* Count and limit the retries though; either hardware or */ 1845 /* software errors can go forever... */ 1846 hc_reset(ohci); 1847 return -1; 1848 } 1849 1850 if (ints & OHCI_INTR_WDH) { 1851 ohci_mdelay(1); 1852 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable); 1853 (void)ohci_readl(®s->intrdisable); /* flush */ 1854 stat = dl_done_list(ohci); 1855 ohci_writel(OHCI_INTR_WDH, ®s->intrenable); 1856 (void)ohci_readl(®s->intrdisable); /* flush */ 1857 } 1858 1859 if (ints & OHCI_INTR_SO) { 1860 dbg("USB Schedule overrun\n"); 1861 ohci_writel(OHCI_INTR_SO, ®s->intrenable); 1862 stat = -1; 1863 } 1864 1865 /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ 1866 if (ints & OHCI_INTR_SF) { 1867 unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1; 1868 mdelay(1); 1869 ohci_writel(OHCI_INTR_SF, ®s->intrdisable); 1870 if (ohci->ed_rm_list[frame] != NULL) 1871 ohci_writel(OHCI_INTR_SF, ®s->intrenable); 1872 stat = 0xff; 1873 } 1874 1875 ohci_writel(ints, ®s->intrstatus); 1876 return stat; 1877 } 1878 1879 /*-------------------------------------------------------------------------*/ 1880 1881 #ifndef CONFIG_DM_USB 1882 1883 /*-------------------------------------------------------------------------*/ 1884 1885 /* De-allocate all resources.. */ 1886 1887 static void hc_release_ohci(ohci_t *ohci) 1888 { 1889 dbg("USB HC release ohci usb-%s", ohci->slot_name); 1890 1891 if (!ohci->disabled) 1892 hc_reset(ohci); 1893 } 1894 1895 /*-------------------------------------------------------------------------*/ 1896 1897 /* 1898 * low level initalisation routine, called from usb.c 1899 */ 1900 static char ohci_inited = 0; 1901 1902 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) 1903 { 1904 #ifdef CONFIG_PCI_OHCI 1905 pci_dev_t pdev; 1906 #endif 1907 1908 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT 1909 /* cpu dependant init */ 1910 if (usb_cpu_init()) 1911 return -1; 1912 #endif 1913 1914 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT 1915 /* board dependant init */ 1916 if (board_usb_init(index, USB_INIT_HOST)) 1917 return -1; 1918 #endif 1919 memset(&gohci, 0, sizeof(ohci_t)); 1920 1921 /* align the storage */ 1922 if ((__u32)&ghcca[0] & 0xff) { 1923 err("HCCA not aligned!!"); 1924 return -1; 1925 } 1926 gohci.hcca = &ghcca[0]; 1927 info("aligned ghcca %p", gohci.hcca); 1928 memset(gohci.hcca, 0, sizeof(struct ohci_hcca)); 1929 1930 gohci.disabled = 1; 1931 gohci.sleeping = 0; 1932 gohci.irq = -1; 1933 #ifdef CONFIG_PCI_OHCI 1934 pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO); 1935 1936 if (pdev != -1) { 1937 u16 vid, did; 1938 u32 base; 1939 pci_read_config_word(pdev, PCI_VENDOR_ID, &vid); 1940 pci_read_config_word(pdev, PCI_DEVICE_ID, &did); 1941 printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n", 1942 vid, did, (pdev >> 16) & 0xff, 1943 (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7); 1944 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base); 1945 printf("OHCI regs address 0x%08x\n", base); 1946 gohci.regs = (struct ohci_regs *)base; 1947 } else 1948 return -1; 1949 #else 1950 gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE; 1951 #endif 1952 1953 gohci.flags = 0; 1954 gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME; 1955 1956 if (hc_reset (&gohci) < 0) { 1957 hc_release_ohci (&gohci); 1958 err ("can't reset usb-%s", gohci.slot_name); 1959 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT 1960 /* board dependant cleanup */ 1961 board_usb_cleanup(index, USB_INIT_HOST); 1962 #endif 1963 1964 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT 1965 /* cpu dependant cleanup */ 1966 usb_cpu_init_fail(); 1967 #endif 1968 return -1; 1969 } 1970 1971 if (hc_start(&gohci) < 0) { 1972 err("can't start usb-%s", gohci.slot_name); 1973 hc_release_ohci(&gohci); 1974 /* Initialization failed */ 1975 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT 1976 /* board dependant cleanup */ 1977 usb_board_stop(); 1978 #endif 1979 1980 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT 1981 /* cpu dependant cleanup */ 1982 usb_cpu_stop(); 1983 #endif 1984 return -1; 1985 } 1986 1987 #ifdef DEBUG 1988 ohci_dump(&gohci, 1); 1989 #else 1990 ohci_mdelay(1); 1991 #endif 1992 ohci_inited = 1; 1993 return 0; 1994 } 1995 1996 int usb_lowlevel_stop(int index) 1997 { 1998 /* this gets called really early - before the controller has */ 1999 /* even been initialized! */ 2000 if (!ohci_inited) 2001 return 0; 2002 /* TODO release any interrupts, etc. */ 2003 /* call hc_release_ohci() here ? */ 2004 hc_reset(&gohci); 2005 2006 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT 2007 /* board dependant cleanup */ 2008 if (usb_board_stop()) 2009 return -1; 2010 #endif 2011 2012 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT 2013 /* cpu dependant cleanup */ 2014 if (usb_cpu_stop()) 2015 return -1; 2016 #endif 2017 /* This driver is no longer initialised. It needs a new low-level 2018 * init (board/cpu) before it can be used again. */ 2019 ohci_inited = 0; 2020 return 0; 2021 } 2022 2023 int submit_control_msg(struct usb_device *dev, unsigned long pipe, 2024 void *buffer, int transfer_len, struct devrequest *setup) 2025 { 2026 return _ohci_submit_control_msg(&gohci, dev, pipe, buffer, 2027 transfer_len, setup); 2028 } 2029 #endif 2030 2031 #ifdef CONFIG_DM_USB 2032 static int ohci_submit_control_msg(struct udevice *dev, struct usb_device *udev, 2033 unsigned long pipe, void *buffer, int length, 2034 struct devrequest *setup) 2035 { 2036 ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); 2037 2038 return _ohci_submit_control_msg(ohci, udev, pipe, buffer, 2039 length, setup); 2040 } 2041 2042 static int ohci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, 2043 unsigned long pipe, void *buffer, int length) 2044 { 2045 ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); 2046 2047 return submit_common_msg(ohci, udev, pipe, buffer, length, NULL, 0); 2048 } 2049 2050 static int ohci_submit_int_msg(struct udevice *dev, struct usb_device *udev, 2051 unsigned long pipe, void *buffer, int length, 2052 int interval) 2053 { 2054 ohci_t *ohci = dev_get_priv(usb_get_bus(dev)); 2055 2056 return submit_common_msg(ohci, udev, pipe, buffer, length, 2057 NULL, interval); 2058 } 2059 2060 int ohci_register(struct udevice *dev, struct ohci_regs *regs) 2061 { 2062 struct usb_bus_priv *priv = dev_get_uclass_priv(dev); 2063 ohci_t *ohci = dev_get_priv(dev); 2064 u32 reg; 2065 2066 priv->desc_before_addr = true; 2067 2068 ohci->regs = regs; 2069 ohci->hcca = memalign(256, sizeof(struct ohci_hcca)); 2070 if (!ohci->hcca) 2071 return -ENOMEM; 2072 memset(ohci->hcca, 0, sizeof(struct ohci_hcca)); 2073 2074 if (hc_reset(ohci) < 0) 2075 return -EIO; 2076 2077 if (hc_start(ohci) < 0) 2078 return -EIO; 2079 2080 reg = ohci_readl(®s->revision); 2081 printf("USB OHCI %x.%x\n", (reg >> 4) & 0xf, reg & 0xf); 2082 2083 return 0; 2084 } 2085 2086 int ohci_deregister(struct udevice *dev) 2087 { 2088 ohci_t *ohci = dev_get_priv(dev); 2089 2090 if (hc_reset(ohci) < 0) 2091 return -EIO; 2092 2093 free(ohci->hcca); 2094 2095 return 0; 2096 } 2097 2098 struct dm_usb_ops ohci_usb_ops = { 2099 .control = ohci_submit_control_msg, 2100 .bulk = ohci_submit_bulk_msg, 2101 .interrupt = ohci_submit_int_msg, 2102 }; 2103 2104 #endif 2105