1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * Version 2 as published by the Free Software Foundation. 7 */ 8 9 #include <common.h> 10 #include <i2c.h> 11 12 #include <asm/fsl_ddr_sdram.h> 13 #include <asm/fsl_ddr_dimm_params.h> 14 15 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) 16 { 17 i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); 18 } 19 20 unsigned int fsl_ddr_get_mem_data_rate(void) 21 { 22 return get_ddr_freq(0); 23 } 24 25 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, 26 unsigned int ctrl_num) 27 { 28 unsigned int i; 29 unsigned int i2c_address = 0; 30 31 for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { 32 if (ctrl_num == 0 && i == 0) { 33 i2c_address = SPD_EEPROM_ADDRESS1; 34 } 35 if (ctrl_num == 1 && i == 0) { 36 i2c_address = SPD_EEPROM_ADDRESS2; 37 } 38 get_spd(&(ctrl_dimms_spd[i]), i2c_address); 39 } 40 } 41 42 void fsl_ddr_board_options(memctl_options_t *popts, 43 dimm_params_t *pdimm, 44 unsigned int ctrl_num) 45 { 46 /* 47 * Factors to consider for clock adjust: 48 * - number of chips on bus 49 * - position of slot 50 * - DDR1 vs. DDR2? 51 * - ??? 52 * 53 * This needs to be determined on a board-by-board basis. 54 * 0110 3/4 cycle late 55 * 0111 7/8 cycle late 56 */ 57 popts->clk_adjust = 7; 58 59 /* 60 * Factors to consider for CPO: 61 * - frequency 62 * - ddr1 vs. ddr2 63 */ 64 popts->cpo_override = 10; 65 66 /* 67 * Factors to consider for write data delay: 68 * - number of DIMMs 69 * 70 * 1 = 1/4 clock delay 71 * 2 = 1/2 clock delay 72 * 3 = 3/4 clock delay 73 * 4 = 1 clock delay 74 * 5 = 5/4 clock delay 75 * 6 = 3/2 clock delay 76 */ 77 popts->write_data_delay = 5; 78 79 /* 80 * Factors to consider for half-strength driver enable: 81 * - number of DIMMs installed 82 */ 83 popts->half_strength_driver_enable = 0; 84 } 85