1 /* 2 * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <pci.h> 27 #include <asm/processor.h> 28 #include <asm/mmu.h> 29 #include <asm/immap_85xx.h> 30 #include <asm/fsl_pci.h> 31 #include <asm/fsl_ddr_sdram.h> 32 #include <asm/fsl_serdes.h> 33 #include <spd_sdram.h> 34 #include <i2c.h> 35 #include <ioports.h> 36 #include <libfdt.h> 37 #include <fdt_support.h> 38 39 #include "bcsr.h" 40 41 const qe_iop_conf_t qe_iop_conf_tab[] = { 42 /* GETH1 */ 43 {4, 10, 1, 0, 2}, /* TxD0 */ 44 {4, 9, 1, 0, 2}, /* TxD1 */ 45 {4, 8, 1, 0, 2}, /* TxD2 */ 46 {4, 7, 1, 0, 2}, /* TxD3 */ 47 {4, 23, 1, 0, 2}, /* TxD4 */ 48 {4, 22, 1, 0, 2}, /* TxD5 */ 49 {4, 21, 1, 0, 2}, /* TxD6 */ 50 {4, 20, 1, 0, 2}, /* TxD7 */ 51 {4, 15, 2, 0, 2}, /* RxD0 */ 52 {4, 14, 2, 0, 2}, /* RxD1 */ 53 {4, 13, 2, 0, 2}, /* RxD2 */ 54 {4, 12, 2, 0, 2}, /* RxD3 */ 55 {4, 29, 2, 0, 2}, /* RxD4 */ 56 {4, 28, 2, 0, 2}, /* RxD5 */ 57 {4, 27, 2, 0, 2}, /* RxD6 */ 58 {4, 26, 2, 0, 2}, /* RxD7 */ 59 {4, 11, 1, 0, 2}, /* TX_EN */ 60 {4, 24, 1, 0, 2}, /* TX_ER */ 61 {4, 16, 2, 0, 2}, /* RX_DV */ 62 {4, 30, 2, 0, 2}, /* RX_ER */ 63 {4, 17, 2, 0, 2}, /* RX_CLK */ 64 {4, 19, 1, 0, 2}, /* GTX_CLK */ 65 {1, 31, 2, 0, 3}, /* GTX125 */ 66 67 /* GETH2 */ 68 {5, 10, 1, 0, 2}, /* TxD0 */ 69 {5, 9, 1, 0, 2}, /* TxD1 */ 70 {5, 8, 1, 0, 2}, /* TxD2 */ 71 {5, 7, 1, 0, 2}, /* TxD3 */ 72 {5, 23, 1, 0, 2}, /* TxD4 */ 73 {5, 22, 1, 0, 2}, /* TxD5 */ 74 {5, 21, 1, 0, 2}, /* TxD6 */ 75 {5, 20, 1, 0, 2}, /* TxD7 */ 76 {5, 15, 2, 0, 2}, /* RxD0 */ 77 {5, 14, 2, 0, 2}, /* RxD1 */ 78 {5, 13, 2, 0, 2}, /* RxD2 */ 79 {5, 12, 2, 0, 2}, /* RxD3 */ 80 {5, 29, 2, 0, 2}, /* RxD4 */ 81 {5, 28, 2, 0, 2}, /* RxD5 */ 82 {5, 27, 2, 0, 3}, /* RxD6 */ 83 {5, 26, 2, 0, 2}, /* RxD7 */ 84 {5, 11, 1, 0, 2}, /* TX_EN */ 85 {5, 24, 1, 0, 2}, /* TX_ER */ 86 {5, 16, 2, 0, 2}, /* RX_DV */ 87 {5, 30, 2, 0, 2}, /* RX_ER */ 88 {5, 17, 2, 0, 2}, /* RX_CLK */ 89 {5, 19, 1, 0, 2}, /* GTX_CLK */ 90 {1, 31, 2, 0, 3}, /* GTX125 */ 91 {4, 6, 3, 0, 2}, /* MDIO */ 92 {4, 5, 1, 0, 2}, /* MDC */ 93 94 /* UART1 */ 95 {2, 0, 1, 0, 2}, /* UART_SOUT1 */ 96 {2, 1, 1, 0, 2}, /* UART_RTS1 */ 97 {2, 2, 2, 0, 2}, /* UART_CTS1 */ 98 {2, 3, 2, 0, 2}, /* UART_SIN1 */ 99 100 {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ 101 }; 102 103 void local_bus_init(void); 104 105 int board_early_init_f (void) 106 { 107 /* 108 * Initialize local bus. 109 */ 110 local_bus_init (); 111 112 enable_8568mds_duart(); 113 enable_8568mds_flash_write(); 114 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2) 115 reset_8568mds_uccs(); 116 #endif 117 #if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) 118 enable_8568mds_qe_mdio(); 119 #endif 120 121 #ifdef CONFIG_SYS_I2C2_OFFSET 122 /* Enable I2C2_SCL and I2C2_SDA */ 123 volatile struct par_io *port_c; 124 port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140); 125 port_c->cpdir2 |= 0x0f000000; 126 port_c->cppar2 &= ~0x0f000000; 127 port_c->cppar2 |= 0x0a000000; 128 #endif 129 130 return 0; 131 } 132 133 int checkboard (void) 134 { 135 printf ("Board: 8568 MDS\n"); 136 137 return 0; 138 } 139 140 /* 141 * Initialize Local Bus 142 */ 143 void 144 local_bus_init(void) 145 { 146 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 147 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 148 149 uint clkdiv; 150 uint lbc_hz; 151 sys_info_t sysinfo; 152 153 get_sys_info(&sysinfo); 154 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; 155 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; 156 157 gur->lbiuiplldcr1 = 0x00078080; 158 if (clkdiv == 16) { 159 gur->lbiuiplldcr0 = 0x7c0f1bf0; 160 } else if (clkdiv == 8) { 161 gur->lbiuiplldcr0 = 0x6c0f1bf0; 162 } else if (clkdiv == 4) { 163 gur->lbiuiplldcr0 = 0x5c0f1bf0; 164 } 165 166 lbc->lcrr |= 0x00030000; 167 168 asm("sync;isync;msync"); 169 } 170 171 /* 172 * Initialize SDRAM memory on the Local Bus. 173 */ 174 void 175 sdram_init(void) 176 { 177 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 178 179 uint idx; 180 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 181 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 182 uint lsdmr_common; 183 184 puts(" SDRAM: "); 185 186 print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); 187 188 /* 189 * Setup SDRAM Base and Option Registers 190 */ 191 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); 192 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); 193 asm("msync"); 194 195 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 196 asm("msync"); 197 198 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 199 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 200 asm("msync"); 201 202 /* 203 * MPC8568 uses "new" 15-16 style addressing. 204 */ 205 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; 206 lsdmr_common |= LSDMR_BSMA1516; 207 208 /* 209 * Issue PRECHARGE ALL command. 210 */ 211 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; 212 asm("sync;msync"); 213 *sdram_addr = 0xff; 214 ppcDcbf((unsigned long) sdram_addr); 215 udelay(100); 216 217 /* 218 * Issue 8 AUTO REFRESH commands. 219 */ 220 for (idx = 0; idx < 8; idx++) { 221 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; 222 asm("sync;msync"); 223 *sdram_addr = 0xff; 224 ppcDcbf((unsigned long) sdram_addr); 225 udelay(100); 226 } 227 228 /* 229 * Issue 8 MODE-set command. 230 */ 231 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; 232 asm("sync;msync"); 233 *sdram_addr = 0xff; 234 ppcDcbf((unsigned long) sdram_addr); 235 udelay(100); 236 237 /* 238 * Issue NORMAL OP command. 239 */ 240 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; 241 asm("sync;msync"); 242 *sdram_addr = 0xff; 243 ppcDcbf((unsigned long) sdram_addr); 244 udelay(200); /* Overkill. Must wait > 200 bus cycles */ 245 246 #endif /* enable SDRAM init */ 247 } 248 249 #if defined(CONFIG_PCI) 250 #ifndef CONFIG_PCI_PNP 251 static struct pci_config_table pci_mpc8568mds_config_table[] = { 252 { 253 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 254 pci_cfgfunc_config_device, 255 {PCI_ENET0_IOADDR, 256 PCI_ENET0_MEMADDR, 257 PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} 258 }, 259 {} 260 }; 261 #endif 262 263 static struct pci_controller pci1_hose = { 264 #ifndef CONFIG_PCI_PNP 265 config_table: pci_mpc8568mds_config_table, 266 #endif 267 }; 268 #endif /* CONFIG_PCI */ 269 270 #ifdef CONFIG_PCIE1 271 static struct pci_controller pcie1_hose; 272 #endif /* CONFIG_PCIE1 */ 273 274 /* 275 * pib_init() -- Initialize the PCA9555 IO expander on the PIB board 276 */ 277 void 278 pib_init(void) 279 { 280 u8 val8, orig_i2c_bus; 281 /* 282 * Assign PIB PMC2/3 to PCI bus 283 */ 284 285 /*switch temporarily to I2C bus #2 */ 286 orig_i2c_bus = i2c_get_bus_num(); 287 i2c_set_bus_num(1); 288 289 val8 = 0x00; 290 i2c_write(0x23, 0x6, 1, &val8, 1); 291 i2c_write(0x23, 0x7, 1, &val8, 1); 292 val8 = 0xff; 293 i2c_write(0x23, 0x2, 1, &val8, 1); 294 i2c_write(0x23, 0x3, 1, &val8, 1); 295 296 val8 = 0x00; 297 i2c_write(0x26, 0x6, 1, &val8, 1); 298 val8 = 0x34; 299 i2c_write(0x26, 0x7, 1, &val8, 1); 300 val8 = 0xf9; 301 i2c_write(0x26, 0x2, 1, &val8, 1); 302 val8 = 0xff; 303 i2c_write(0x26, 0x3, 1, &val8, 1); 304 305 val8 = 0x00; 306 i2c_write(0x27, 0x6, 1, &val8, 1); 307 i2c_write(0x27, 0x7, 1, &val8, 1); 308 val8 = 0xff; 309 i2c_write(0x27, 0x2, 1, &val8, 1); 310 val8 = 0xef; 311 i2c_write(0x27, 0x3, 1, &val8, 1); 312 313 asm("eieio"); 314 } 315 316 #ifdef CONFIG_PCI 317 void pci_init_board(void) 318 { 319 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 320 struct fsl_pci_info pci_info[2]; 321 u32 devdisr, pordevsr, io_sel; 322 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; 323 int first_free_busno = 0; 324 int num = 0; 325 326 int pcie_ep, pcie_configured; 327 328 devdisr = in_be32(&gur->devdisr); 329 pordevsr = in_be32(&gur->pordevsr); 330 porpllsr = in_be32(&gur->porpllsr); 331 io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; 332 333 debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); 334 335 #ifdef CONFIG_PCI1 336 pci_speed = 66666000; 337 pci_32 = 1; 338 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; 339 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; 340 341 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { 342 SET_STD_PCI_INFO(pci_info[num], 1); 343 pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); 344 printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", 345 (pci_32) ? 32 : 64, 346 (pci_speed == 33333000) ? "33" : 347 (pci_speed == 66666000) ? "66" : "unknown", 348 pci_clk_sel ? "sync" : "async", 349 pci_agent ? "agent" : "host", 350 pci_arb ? "arbiter" : "external-arbiter", 351 pci_info[num].regs); 352 353 first_free_busno = fsl_pci_init_port(&pci_info[num++], 354 &pci1_hose, first_free_busno); 355 } else { 356 printf("PCI: disabled\n"); 357 } 358 359 puts("\n"); 360 #else 361 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ 362 #endif 363 364 #ifdef CONFIG_PCIE1 365 pcie_configured = is_serdes_configured(PCIE1); 366 367 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ 368 SET_STD_PCIE_INFO(pci_info[num], 1); 369 pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); 370 printf("PCIE1: connected to Slot as %s (base addr %lx)\n", 371 pcie_ep ? "Endpoint" : "Root Complex", 372 pci_info[num].regs); 373 374 first_free_busno = fsl_pci_init_port(&pci_info[num++], 375 &pcie1_hose, first_free_busno); 376 } else { 377 printf("PCIE1: disabled\n"); 378 } 379 380 puts("\n"); 381 #else 382 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ 383 #endif 384 } 385 #endif /* CONFIG_PCI */ 386 387 #if defined(CONFIG_OF_BOARD_SETUP) 388 void ft_board_setup(void *blob, bd_t *bd) 389 { 390 ft_cpu_setup(blob, bd); 391 392 FT_FSL_PCI_SETUP; 393 } 394 #endif 395