1/* 2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ 44#include "sun8i-h3-orangepi-2.dts" 45 46/ { 47 model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E"; 48 compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; 49 50 reg_usb3_vbus: usb3-vbus { 51 compatible = "regulator-fixed"; 52 pinctrl-names = "default"; 53 pinctrl-0 = <&usb3_vbus_pin_a>; 54 regulator-name = "usb3-vbus"; 55 regulator-min-microvolt = <5000000>; 56 regulator-max-microvolt = <5000000>; 57 regulator-boot-on; 58 enable-active-high; 59 gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; 60 }; 61}; 62 63&ehci2 { 64 status = "okay"; 65}; 66 67&ehci3 { 68 status = "okay"; 69}; 70 71&mmc2 { 72 pinctrl-names = "default"; 73 pinctrl-0 = <&mmc2_8bit_pins>; 74 vmmc-supply = <®_vcc3v3>; 75 bus-width = <8>; 76 non-removable; 77 cap-mmc-hw-reset; 78 status = "okay"; 79}; 80 81&mmc2_8bit_pins { 82 /* Increase drive strength for DDR modes */ 83 allwinner,drive = <SUN4I_PINCTRL_40_MA>; 84 /* eMMC is missing pull-ups */ 85 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 86}; 87 88&ohci1 { 89 status = "okay"; 90}; 91 92&ohci2 { 93 status = "okay"; 94}; 95 96&ohci3 { 97 status = "okay"; 98}; 99 100&pio { 101 usb3_vbus_pin_a: usb3_vbus_pin@0 { 102 allwinner,pins = "PG11"; 103 allwinner,function = "gpio_out"; 104 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 105 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 106 }; 107}; 108 109&usbphy { 110 usb3_vbus-supply = <®_usb3_vbus>; 111}; 112