xref: /openbmc/linux/net/tipc/core.c (revision 08c80e9a031df0a8f0269477a32f5eae47d7a146)
1 /*
2  * net/tipc/core.c: TIPC module code
3  *
4  * Copyright (c) 2003-2006, Ericsson AB
5  * Copyright (c) 2005-2006, Wind River Systems
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the names of the copyright holders nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * Alternatively, this software may be distributed under the terms of the
21  * GNU General Public License ("GPL") version 2 as published by the Free
22  * Software Foundation.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36 
37 #include <linux/init.h>
38 #include <linux/module.h>
39 #include <linux/kernel.h>
40 #include <linux/random.h>
41 
42 #include "core.h"
43 #include "ref.h"
44 #include "net.h"
45 #include "user_reg.h"
46 #include "name_table.h"
47 #include "subscr.h"
48 #include "config.h"
49 
50 
51 #ifndef CONFIG_TIPC_CLUSTERS
52 #define CONFIG_TIPC_CLUSTERS 1
53 #endif
54 
55 #ifndef CONFIG_TIPC_NODES
56 #define CONFIG_TIPC_NODES 255
57 #endif
58 
59 #ifndef CONFIG_TIPC_PORTS
60 #define CONFIG_TIPC_PORTS 8191
61 #endif
62 
63 #ifndef CONFIG_TIPC_LOG
64 #define CONFIG_TIPC_LOG 0
65 #endif
66 
67 /* global variables used by multiple sub-systems within TIPC */
68 
69 int tipc_mode = TIPC_NOT_RUNNING;
70 int tipc_random;
71 atomic_t tipc_user_count = ATOMIC_INIT(0);
72 
73 const char tipc_alphabet[] =
74 	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_.";
75 
76 /* configurable TIPC parameters */
77 
78 u32 tipc_own_addr;
79 int tipc_max_clusters;
80 int tipc_max_nodes;
81 int tipc_max_ports;
82 int tipc_max_subscriptions;
83 int tipc_max_publications;
84 int tipc_net_id;
85 int tipc_remote_management;
86 
87 
88 /**
89  * tipc_buf_acquire - creates a TIPC message buffer
90  * @size: message size (including TIPC header)
91  *
92  * Returns a new buffer with data pointers set to the specified size.
93  *
94  * NOTE: Headroom is reserved to allow prepending of a data link header.
95  *       There may also be unrequested tailroom present at the buffer's end.
96  */
97 
98 struct sk_buff *tipc_buf_acquire(u32 size)
99 {
100 	struct sk_buff *skb;
101 	unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u;
102 
103 	skb = alloc_skb_fclone(buf_size, GFP_ATOMIC);
104 	if (skb) {
105 		skb_reserve(skb, BUF_HEADROOM);
106 		skb_put(skb, size);
107 		skb->next = NULL;
108 	}
109 	return skb;
110 }
111 
112 /**
113  * tipc_core_stop_net - shut down TIPC networking sub-systems
114  */
115 
116 static void tipc_core_stop_net(void)
117 {
118 	tipc_eth_media_stop();
119 	tipc_net_stop();
120 }
121 
122 /**
123  * start_net - start TIPC networking sub-systems
124  */
125 
126 int tipc_core_start_net(unsigned long addr)
127 {
128 	int res;
129 
130 	if ((res = tipc_net_start(addr)) ||
131 	    (res = tipc_eth_media_start())) {
132 		tipc_core_stop_net();
133 	}
134 	return res;
135 }
136 
137 /**
138  * tipc_core_stop - switch TIPC from SINGLE NODE to NOT RUNNING mode
139  */
140 
141 static void tipc_core_stop(void)
142 {
143 	if (tipc_mode != TIPC_NODE_MODE)
144 		return;
145 
146 	tipc_mode = TIPC_NOT_RUNNING;
147 
148 	tipc_netlink_stop();
149 	tipc_handler_stop();
150 	tipc_cfg_stop();
151 	tipc_subscr_stop();
152 	tipc_reg_stop();
153 	tipc_nametbl_stop();
154 	tipc_ref_table_stop();
155 	tipc_socket_stop();
156 	tipc_log_resize(0);
157 }
158 
159 /**
160  * tipc_core_start - switch TIPC from NOT RUNNING to SINGLE NODE mode
161  */
162 
163 static int tipc_core_start(void)
164 {
165 	int res;
166 
167 	if (tipc_mode != TIPC_NOT_RUNNING)
168 		return -ENOPROTOOPT;
169 
170 	get_random_bytes(&tipc_random, sizeof(tipc_random));
171 	tipc_mode = TIPC_NODE_MODE;
172 
173 	if ((res = tipc_handler_start()) ||
174 	    (res = tipc_ref_table_init(tipc_max_ports, tipc_random)) ||
175 	    (res = tipc_reg_start()) ||
176 	    (res = tipc_nametbl_init()) ||
177 	    (res = tipc_k_signal((Handler)tipc_subscr_start, 0)) ||
178 	    (res = tipc_k_signal((Handler)tipc_cfg_init, 0)) ||
179 	    (res = tipc_netlink_start()) ||
180 	    (res = tipc_socket_init())) {
181 		tipc_core_stop();
182 	}
183 	return res;
184 }
185 
186 
187 static int __init tipc_init(void)
188 {
189 	int res;
190 
191 	if (tipc_log_resize(CONFIG_TIPC_LOG) != 0)
192 		warn("Unable to create log buffer\n");
193 
194 	info("Activated (version " TIPC_MOD_VER
195 	     " compiled " __DATE__ " " __TIME__ ")\n");
196 
197 	tipc_own_addr = 0;
198 	tipc_remote_management = 1;
199 	tipc_max_publications = 10000;
200 	tipc_max_subscriptions = 2000;
201 	tipc_max_ports = CONFIG_TIPC_PORTS;
202 	tipc_max_clusters = CONFIG_TIPC_CLUSTERS;
203 	tipc_max_nodes = CONFIG_TIPC_NODES;
204 	tipc_net_id = 4711;
205 
206 	if ((res = tipc_core_start()))
207 		err("Unable to start in single node mode\n");
208 	else
209 		info("Started in single node mode\n");
210 	return res;
211 }
212 
213 static void __exit tipc_exit(void)
214 {
215 	tipc_core_stop_net();
216 	tipc_core_stop();
217 	info("Deactivated\n");
218 }
219 
220 module_init(tipc_init);
221 module_exit(tipc_exit);
222 
223 MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
224 MODULE_LICENSE("Dual BSD/GPL");
225 MODULE_VERSION(TIPC_MOD_VER);
226