1 /* 2 * Copyright 2002-2005, Instant802 Networks, Inc. 3 * Copyright 2005-2006, Devicescape Software, Inc. 4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11 #include <net/mac80211.h> 12 #include <linux/module.h> 13 #include <linux/init.h> 14 #include <linux/netdevice.h> 15 #include <linux/types.h> 16 #include <linux/slab.h> 17 #include <linux/skbuff.h> 18 #include <linux/etherdevice.h> 19 #include <linux/if_arp.h> 20 #include <linux/rtnetlink.h> 21 #include <linux/bitmap.h> 22 #include <linux/pm_qos.h> 23 #include <linux/inetdevice.h> 24 #include <net/net_namespace.h> 25 #include <net/cfg80211.h> 26 27 #include "ieee80211_i.h" 28 #include "driver-ops.h" 29 #include "rate.h" 30 #include "mesh.h" 31 #include "wep.h" 32 #include "led.h" 33 #include "cfg.h" 34 #include "debugfs.h" 35 36 static struct lock_class_key ieee80211_rx_skb_queue_class; 37 38 void ieee80211_configure_filter(struct ieee80211_local *local) 39 { 40 u64 mc; 41 unsigned int changed_flags; 42 unsigned int new_flags = 0; 43 44 if (atomic_read(&local->iff_promiscs)) 45 new_flags |= FIF_PROMISC_IN_BSS; 46 47 if (atomic_read(&local->iff_allmultis)) 48 new_flags |= FIF_ALLMULTI; 49 50 if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) || 51 test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning)) 52 new_flags |= FIF_BCN_PRBRESP_PROMISC; 53 54 if (local->fif_probe_req || local->probe_req_reg) 55 new_flags |= FIF_PROBE_REQ; 56 57 if (local->fif_fcsfail) 58 new_flags |= FIF_FCSFAIL; 59 60 if (local->fif_plcpfail) 61 new_flags |= FIF_PLCPFAIL; 62 63 if (local->fif_control) 64 new_flags |= FIF_CONTROL; 65 66 if (local->fif_other_bss) 67 new_flags |= FIF_OTHER_BSS; 68 69 if (local->fif_pspoll) 70 new_flags |= FIF_PSPOLL; 71 72 spin_lock_bh(&local->filter_lock); 73 changed_flags = local->filter_flags ^ new_flags; 74 75 mc = drv_prepare_multicast(local, &local->mc_list); 76 spin_unlock_bh(&local->filter_lock); 77 78 /* be a bit nasty */ 79 new_flags |= (1<<31); 80 81 drv_configure_filter(local, changed_flags, &new_flags, mc); 82 83 WARN_ON(new_flags & (1<<31)); 84 85 local->filter_flags = new_flags & ~(1<<31); 86 } 87 88 static void ieee80211_reconfig_filter(struct work_struct *work) 89 { 90 struct ieee80211_local *local = 91 container_of(work, struct ieee80211_local, reconfig_filter); 92 93 ieee80211_configure_filter(local); 94 } 95 96 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) 97 { 98 struct ieee80211_channel *chan; 99 int ret = 0; 100 int power; 101 enum nl80211_channel_type channel_type; 102 u32 offchannel_flag; 103 104 might_sleep(); 105 106 offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; 107 if (local->scan_channel) { 108 chan = local->scan_channel; 109 /* If scanning on oper channel, use whatever channel-type 110 * is currently in use. 111 */ 112 if (chan == local->oper_channel) 113 channel_type = local->_oper_channel_type; 114 else 115 channel_type = NL80211_CHAN_NO_HT; 116 } else if (local->tmp_channel) { 117 chan = local->tmp_channel; 118 channel_type = local->tmp_channel_type; 119 } else { 120 chan = local->oper_channel; 121 channel_type = local->_oper_channel_type; 122 } 123 124 if (chan != local->oper_channel || 125 channel_type != local->_oper_channel_type) 126 local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; 127 else 128 local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; 129 130 offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; 131 132 if (offchannel_flag || chan != local->hw.conf.channel || 133 channel_type != local->hw.conf.channel_type) { 134 local->hw.conf.channel = chan; 135 local->hw.conf.channel_type = channel_type; 136 changed |= IEEE80211_CONF_CHANGE_CHANNEL; 137 } 138 139 if (!conf_is_ht(&local->hw.conf)) { 140 /* 141 * mac80211.h documents that this is only valid 142 * when the channel is set to an HT type, and 143 * that otherwise STATIC is used. 144 */ 145 local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC; 146 } else if (local->hw.conf.smps_mode != local->smps_mode) { 147 local->hw.conf.smps_mode = local->smps_mode; 148 changed |= IEEE80211_CONF_CHANGE_SMPS; 149 } 150 151 if (test_bit(SCAN_SW_SCANNING, &local->scanning) || 152 test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning) || 153 test_bit(SCAN_HW_SCANNING, &local->scanning) || 154 !local->ap_power_level) 155 power = chan->max_power; 156 else 157 power = min(chan->max_power, local->ap_power_level); 158 159 if (local->user_power_level >= 0) 160 power = min(power, local->user_power_level); 161 162 if (local->hw.conf.power_level != power) { 163 changed |= IEEE80211_CONF_CHANGE_POWER; 164 local->hw.conf.power_level = power; 165 } 166 167 if (changed && local->open_count) { 168 ret = drv_config(local, changed); 169 /* 170 * Goal: 171 * HW reconfiguration should never fail, the driver has told 172 * us what it can support so it should live up to that promise. 173 * 174 * Current status: 175 * rfkill is not integrated with mac80211 and a 176 * configuration command can thus fail if hardware rfkill 177 * is enabled 178 * 179 * FIXME: integrate rfkill with mac80211 and then add this 180 * WARN_ON() back 181 * 182 */ 183 /* WARN_ON(ret); */ 184 } 185 186 return ret; 187 } 188 189 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, 190 u32 changed) 191 { 192 struct ieee80211_local *local = sdata->local; 193 static const u8 zero[ETH_ALEN] = { 0 }; 194 195 if (!changed) 196 return; 197 198 if (sdata->vif.type == NL80211_IFTYPE_STATION) { 199 sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; 200 } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) 201 sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; 202 else if (sdata->vif.type == NL80211_IFTYPE_AP) 203 sdata->vif.bss_conf.bssid = sdata->vif.addr; 204 else if (sdata->vif.type == NL80211_IFTYPE_WDS) 205 sdata->vif.bss_conf.bssid = NULL; 206 else if (ieee80211_vif_is_mesh(&sdata->vif)) { 207 sdata->vif.bss_conf.bssid = zero; 208 } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { 209 sdata->vif.bss_conf.bssid = sdata->vif.addr; 210 WARN_ONCE(changed & ~(BSS_CHANGED_IDLE), 211 "P2P Device BSS changed %#x", changed); 212 } else { 213 WARN_ON(1); 214 return; 215 } 216 217 switch (sdata->vif.type) { 218 case NL80211_IFTYPE_AP: 219 case NL80211_IFTYPE_ADHOC: 220 case NL80211_IFTYPE_WDS: 221 case NL80211_IFTYPE_MESH_POINT: 222 break; 223 default: 224 /* do not warn to simplify caller in scan.c */ 225 changed &= ~BSS_CHANGED_BEACON_ENABLED; 226 if (WARN_ON(changed & BSS_CHANGED_BEACON)) 227 return; 228 break; 229 } 230 231 if (changed & BSS_CHANGED_BEACON_ENABLED) { 232 if (local->quiescing || !ieee80211_sdata_running(sdata) || 233 test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) { 234 sdata->vif.bss_conf.enable_beacon = false; 235 } else { 236 /* 237 * Beacon should be enabled, but AP mode must 238 * check whether there is a beacon configured. 239 */ 240 switch (sdata->vif.type) { 241 case NL80211_IFTYPE_AP: 242 sdata->vif.bss_conf.enable_beacon = 243 !!sdata->u.ap.beacon; 244 break; 245 case NL80211_IFTYPE_ADHOC: 246 sdata->vif.bss_conf.enable_beacon = 247 !!sdata->u.ibss.presp; 248 break; 249 #ifdef CONFIG_MAC80211_MESH 250 case NL80211_IFTYPE_MESH_POINT: 251 sdata->vif.bss_conf.enable_beacon = 252 !!sdata->u.mesh.mesh_id_len; 253 break; 254 #endif 255 default: 256 /* not reached */ 257 WARN_ON(1); 258 break; 259 } 260 } 261 } 262 263 drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); 264 } 265 266 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) 267 { 268 sdata->vif.bss_conf.use_cts_prot = false; 269 sdata->vif.bss_conf.use_short_preamble = false; 270 sdata->vif.bss_conf.use_short_slot = false; 271 return BSS_CHANGED_ERP_CTS_PROT | 272 BSS_CHANGED_ERP_PREAMBLE | 273 BSS_CHANGED_ERP_SLOT; 274 } 275 276 static void ieee80211_tasklet_handler(unsigned long data) 277 { 278 struct ieee80211_local *local = (struct ieee80211_local *) data; 279 struct sta_info *sta, *tmp; 280 struct skb_eosp_msg_data *eosp_data; 281 struct sk_buff *skb; 282 283 while ((skb = skb_dequeue(&local->skb_queue)) || 284 (skb = skb_dequeue(&local->skb_queue_unreliable))) { 285 switch (skb->pkt_type) { 286 case IEEE80211_RX_MSG: 287 /* Clear skb->pkt_type in order to not confuse kernel 288 * netstack. */ 289 skb->pkt_type = 0; 290 ieee80211_rx(&local->hw, skb); 291 break; 292 case IEEE80211_TX_STATUS_MSG: 293 skb->pkt_type = 0; 294 ieee80211_tx_status(&local->hw, skb); 295 break; 296 case IEEE80211_EOSP_MSG: 297 eosp_data = (void *)skb->cb; 298 for_each_sta_info(local, eosp_data->sta, sta, tmp) { 299 /* skip wrong virtual interface */ 300 if (memcmp(eosp_data->iface, 301 sta->sdata->vif.addr, ETH_ALEN)) 302 continue; 303 clear_sta_flag(sta, WLAN_STA_SP); 304 break; 305 } 306 dev_kfree_skb(skb); 307 break; 308 default: 309 WARN(1, "mac80211: Packet is of unknown type %d\n", 310 skb->pkt_type); 311 dev_kfree_skb(skb); 312 break; 313 } 314 } 315 } 316 317 static void ieee80211_restart_work(struct work_struct *work) 318 { 319 struct ieee80211_local *local = 320 container_of(work, struct ieee80211_local, restart_work); 321 322 /* wait for scan work complete */ 323 flush_workqueue(local->workqueue); 324 325 mutex_lock(&local->mtx); 326 WARN(test_bit(SCAN_HW_SCANNING, &local->scanning) || 327 rcu_dereference_protected(local->sched_scan_sdata, 328 lockdep_is_held(&local->mtx)), 329 "%s called with hardware scan in progress\n", __func__); 330 mutex_unlock(&local->mtx); 331 332 rtnl_lock(); 333 ieee80211_scan_cancel(local); 334 ieee80211_reconfig(local); 335 rtnl_unlock(); 336 } 337 338 void ieee80211_restart_hw(struct ieee80211_hw *hw) 339 { 340 struct ieee80211_local *local = hw_to_local(hw); 341 342 trace_api_restart_hw(local); 343 344 wiphy_info(hw->wiphy, 345 "Hardware restart was requested\n"); 346 347 /* use this reason, ieee80211_reconfig will unblock it */ 348 ieee80211_stop_queues_by_reason(hw, 349 IEEE80211_QUEUE_STOP_REASON_SUSPEND); 350 351 /* 352 * Stop all Rx during the reconfig. We don't want state changes 353 * or driver callbacks while this is in progress. 354 */ 355 local->in_reconfig = true; 356 barrier(); 357 358 schedule_work(&local->restart_work); 359 } 360 EXPORT_SYMBOL(ieee80211_restart_hw); 361 362 static void ieee80211_recalc_smps_work(struct work_struct *work) 363 { 364 struct ieee80211_local *local = 365 container_of(work, struct ieee80211_local, recalc_smps); 366 367 ieee80211_recalc_smps(local); 368 } 369 370 #ifdef CONFIG_INET 371 static int ieee80211_ifa_changed(struct notifier_block *nb, 372 unsigned long data, void *arg) 373 { 374 struct in_ifaddr *ifa = arg; 375 struct ieee80211_local *local = 376 container_of(nb, struct ieee80211_local, 377 ifa_notifier); 378 struct net_device *ndev = ifa->ifa_dev->dev; 379 struct wireless_dev *wdev = ndev->ieee80211_ptr; 380 struct in_device *idev; 381 struct ieee80211_sub_if_data *sdata; 382 struct ieee80211_bss_conf *bss_conf; 383 struct ieee80211_if_managed *ifmgd; 384 int c = 0; 385 386 /* Make sure it's our interface that got changed */ 387 if (!wdev) 388 return NOTIFY_DONE; 389 390 if (wdev->wiphy != local->hw.wiphy) 391 return NOTIFY_DONE; 392 393 sdata = IEEE80211_DEV_TO_SUB_IF(ndev); 394 bss_conf = &sdata->vif.bss_conf; 395 396 /* ARP filtering is only supported in managed mode */ 397 if (sdata->vif.type != NL80211_IFTYPE_STATION) 398 return NOTIFY_DONE; 399 400 idev = __in_dev_get_rtnl(sdata->dev); 401 if (!idev) 402 return NOTIFY_DONE; 403 404 ifmgd = &sdata->u.mgd; 405 mutex_lock(&ifmgd->mtx); 406 407 /* Copy the addresses to the bss_conf list */ 408 ifa = idev->ifa_list; 409 while (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN && ifa) { 410 bss_conf->arp_addr_list[c] = ifa->ifa_address; 411 ifa = ifa->ifa_next; 412 c++; 413 } 414 415 /* If not all addresses fit the list, disable filtering */ 416 if (ifa) { 417 sdata->arp_filter_state = false; 418 c = 0; 419 } else { 420 sdata->arp_filter_state = true; 421 } 422 bss_conf->arp_addr_cnt = c; 423 424 /* Configure driver only if associated (which also implies it is up) */ 425 if (ifmgd->associated) { 426 bss_conf->arp_filter_enabled = sdata->arp_filter_state; 427 ieee80211_bss_info_change_notify(sdata, 428 BSS_CHANGED_ARP_FILTER); 429 } 430 431 mutex_unlock(&ifmgd->mtx); 432 433 return NOTIFY_DONE; 434 } 435 #endif 436 437 static int ieee80211_napi_poll(struct napi_struct *napi, int budget) 438 { 439 struct ieee80211_local *local = 440 container_of(napi, struct ieee80211_local, napi); 441 442 return local->ops->napi_poll(&local->hw, budget); 443 } 444 445 void ieee80211_napi_schedule(struct ieee80211_hw *hw) 446 { 447 struct ieee80211_local *local = hw_to_local(hw); 448 449 napi_schedule(&local->napi); 450 } 451 EXPORT_SYMBOL(ieee80211_napi_schedule); 452 453 void ieee80211_napi_complete(struct ieee80211_hw *hw) 454 { 455 struct ieee80211_local *local = hw_to_local(hw); 456 457 napi_complete(&local->napi); 458 } 459 EXPORT_SYMBOL(ieee80211_napi_complete); 460 461 /* There isn't a lot of sense in it, but you can transmit anything you like */ 462 static const struct ieee80211_txrx_stypes 463 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { 464 [NL80211_IFTYPE_ADHOC] = { 465 .tx = 0xffff, 466 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | 467 BIT(IEEE80211_STYPE_AUTH >> 4) | 468 BIT(IEEE80211_STYPE_DEAUTH >> 4), 469 }, 470 [NL80211_IFTYPE_STATION] = { 471 .tx = 0xffff, 472 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | 473 BIT(IEEE80211_STYPE_PROBE_REQ >> 4), 474 }, 475 [NL80211_IFTYPE_AP] = { 476 .tx = 0xffff, 477 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | 478 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | 479 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | 480 BIT(IEEE80211_STYPE_DISASSOC >> 4) | 481 BIT(IEEE80211_STYPE_AUTH >> 4) | 482 BIT(IEEE80211_STYPE_DEAUTH >> 4) | 483 BIT(IEEE80211_STYPE_ACTION >> 4), 484 }, 485 [NL80211_IFTYPE_AP_VLAN] = { 486 /* copy AP */ 487 .tx = 0xffff, 488 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | 489 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | 490 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | 491 BIT(IEEE80211_STYPE_DISASSOC >> 4) | 492 BIT(IEEE80211_STYPE_AUTH >> 4) | 493 BIT(IEEE80211_STYPE_DEAUTH >> 4) | 494 BIT(IEEE80211_STYPE_ACTION >> 4), 495 }, 496 [NL80211_IFTYPE_P2P_CLIENT] = { 497 .tx = 0xffff, 498 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | 499 BIT(IEEE80211_STYPE_PROBE_REQ >> 4), 500 }, 501 [NL80211_IFTYPE_P2P_GO] = { 502 .tx = 0xffff, 503 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | 504 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | 505 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | 506 BIT(IEEE80211_STYPE_DISASSOC >> 4) | 507 BIT(IEEE80211_STYPE_AUTH >> 4) | 508 BIT(IEEE80211_STYPE_DEAUTH >> 4) | 509 BIT(IEEE80211_STYPE_ACTION >> 4), 510 }, 511 [NL80211_IFTYPE_MESH_POINT] = { 512 .tx = 0xffff, 513 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | 514 BIT(IEEE80211_STYPE_AUTH >> 4) | 515 BIT(IEEE80211_STYPE_DEAUTH >> 4), 516 }, 517 [NL80211_IFTYPE_P2P_DEVICE] = { 518 .tx = 0xffff, 519 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | 520 BIT(IEEE80211_STYPE_PROBE_REQ >> 4), 521 }, 522 }; 523 524 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { 525 .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR | 526 IEEE80211_HT_AMPDU_PARM_DENSITY, 527 528 .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | 529 IEEE80211_HT_CAP_MAX_AMSDU | 530 IEEE80211_HT_CAP_SGI_40), 531 .mcs = { 532 .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, 533 0xff, 0xff, 0xff, 0xff, 0xff, }, 534 }, 535 }; 536 537 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, 538 const struct ieee80211_ops *ops) 539 { 540 struct ieee80211_local *local; 541 int priv_size, i; 542 struct wiphy *wiphy; 543 bool use_chanctx; 544 545 if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config || 546 !ops->add_interface || !ops->remove_interface || 547 !ops->configure_filter)) 548 return NULL; 549 550 if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove))) 551 return NULL; 552 553 /* check all or no channel context operations exist */ 554 i = !!ops->add_chanctx + !!ops->remove_chanctx + 555 !!ops->change_chanctx + !!ops->assign_vif_chanctx + 556 !!ops->unassign_vif_chanctx; 557 if (WARN_ON(i != 0 && i != 5)) 558 return NULL; 559 use_chanctx = i == 5; 560 561 /* Ensure 32-byte alignment of our private data and hw private data. 562 * We use the wiphy priv data for both our ieee80211_local and for 563 * the driver's private data 564 * 565 * In memory it'll be like this: 566 * 567 * +-------------------------+ 568 * | struct wiphy | 569 * +-------------------------+ 570 * | struct ieee80211_local | 571 * +-------------------------+ 572 * | driver's private data | 573 * +-------------------------+ 574 * 575 */ 576 priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; 577 578 wiphy = wiphy_new(&mac80211_config_ops, priv_size); 579 580 if (!wiphy) 581 return NULL; 582 583 wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes; 584 585 wiphy->privid = mac80211_wiphy_privid; 586 587 wiphy->flags |= WIPHY_FLAG_NETNS_OK | 588 WIPHY_FLAG_4ADDR_AP | 589 WIPHY_FLAG_4ADDR_STATION | 590 WIPHY_FLAG_REPORTS_OBSS | 591 WIPHY_FLAG_OFFCHAN_TX; 592 593 if (ops->remain_on_channel) 594 wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; 595 596 wiphy->features = NL80211_FEATURE_SK_TX_STATUS | 597 NL80211_FEATURE_HT_IBSS; 598 599 if (!ops->set_key) 600 wiphy->flags |= WIPHY_FLAG_IBSS_RSN; 601 602 wiphy->bss_priv_size = sizeof(struct ieee80211_bss); 603 604 local = wiphy_priv(wiphy); 605 606 local->hw.wiphy = wiphy; 607 608 local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); 609 610 local->ops = ops; 611 local->use_chanctx = use_chanctx; 612 613 /* set up some defaults */ 614 local->hw.queues = 1; 615 local->hw.max_rates = 1; 616 local->hw.max_report_rates = 0; 617 local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; 618 local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; 619 local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE; 620 local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; 621 local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; 622 local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS | 623 IEEE80211_RADIOTAP_MCS_HAVE_GI | 624 IEEE80211_RADIOTAP_MCS_HAVE_BW; 625 local->user_power_level = -1; 626 wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask; 627 628 INIT_LIST_HEAD(&local->interfaces); 629 630 __hw_addr_init(&local->mc_list); 631 632 mutex_init(&local->iflist_mtx); 633 mutex_init(&local->mtx); 634 635 mutex_init(&local->key_mtx); 636 spin_lock_init(&local->filter_lock); 637 spin_lock_init(&local->queue_stop_reason_lock); 638 639 INIT_LIST_HEAD(&local->chanctx_list); 640 mutex_init(&local->chanctx_mtx); 641 642 /* 643 * The rx_skb_queue is only accessed from tasklets, 644 * but other SKB queues are used from within IRQ 645 * context. Therefore, this one needs a different 646 * locking class so our direct, non-irq-safe use of 647 * the queue's lock doesn't throw lockdep warnings. 648 */ 649 skb_queue_head_init_class(&local->rx_skb_queue, 650 &ieee80211_rx_skb_queue_class); 651 652 INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); 653 654 INIT_WORK(&local->restart_work, ieee80211_restart_work); 655 656 INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); 657 INIT_WORK(&local->recalc_smps, ieee80211_recalc_smps_work); 658 local->smps_mode = IEEE80211_SMPS_OFF; 659 660 INIT_WORK(&local->dynamic_ps_enable_work, 661 ieee80211_dynamic_ps_enable_work); 662 INIT_WORK(&local->dynamic_ps_disable_work, 663 ieee80211_dynamic_ps_disable_work); 664 setup_timer(&local->dynamic_ps_timer, 665 ieee80211_dynamic_ps_timer, (unsigned long) local); 666 667 INIT_WORK(&local->sched_scan_stopped_work, 668 ieee80211_sched_scan_stopped_work); 669 670 spin_lock_init(&local->ack_status_lock); 671 idr_init(&local->ack_status_frames); 672 /* preallocate at least one entry */ 673 idr_pre_get(&local->ack_status_frames, GFP_KERNEL); 674 675 sta_info_init(local); 676 677 for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { 678 skb_queue_head_init(&local->pending[i]); 679 atomic_set(&local->agg_queue_stop[i], 0); 680 } 681 tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, 682 (unsigned long)local); 683 684 tasklet_init(&local->tasklet, 685 ieee80211_tasklet_handler, 686 (unsigned long) local); 687 688 skb_queue_head_init(&local->skb_queue); 689 skb_queue_head_init(&local->skb_queue_unreliable); 690 691 /* init dummy netdev for use w/ NAPI */ 692 init_dummy_netdev(&local->napi_dev); 693 694 ieee80211_led_names(local); 695 696 ieee80211_roc_setup(local); 697 698 return &local->hw; 699 } 700 EXPORT_SYMBOL(ieee80211_alloc_hw); 701 702 int ieee80211_register_hw(struct ieee80211_hw *hw) 703 { 704 struct ieee80211_local *local = hw_to_local(hw); 705 int result, i; 706 enum ieee80211_band band; 707 int channels, max_bitrates; 708 bool supp_ht, supp_vht; 709 netdev_features_t feature_whitelist; 710 static const u32 cipher_suites[] = { 711 /* keep WEP first, it may be removed below */ 712 WLAN_CIPHER_SUITE_WEP40, 713 WLAN_CIPHER_SUITE_WEP104, 714 WLAN_CIPHER_SUITE_TKIP, 715 WLAN_CIPHER_SUITE_CCMP, 716 717 /* keep last -- depends on hw flags! */ 718 WLAN_CIPHER_SUITE_AES_CMAC 719 }; 720 721 if (hw->flags & IEEE80211_HW_QUEUE_CONTROL && 722 (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE || 723 local->hw.offchannel_tx_hw_queue >= local->hw.queues)) 724 return -EINVAL; 725 726 #ifdef CONFIG_PM 727 if ((hw->wiphy->wowlan.flags || hw->wiphy->wowlan.n_patterns) && 728 (!local->ops->suspend || !local->ops->resume)) 729 return -EINVAL; 730 #endif 731 732 if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan) 733 return -EINVAL; 734 735 if (!local->use_chanctx) { 736 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { 737 const struct ieee80211_iface_combination *comb; 738 739 comb = &local->hw.wiphy->iface_combinations[i]; 740 741 if (comb->num_different_channels > 1) 742 return -EINVAL; 743 } 744 745 /* 746 * WDS is currently prohibited when channel contexts are used 747 * because there's no clear definition of which channel WDS 748 * type interfaces use 749 */ 750 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) 751 return -EINVAL; 752 } 753 754 /* Only HW csum features are currently compatible with mac80211 */ 755 feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | 756 NETIF_F_HW_CSUM; 757 if (WARN_ON(hw->netdev_features & ~feature_whitelist)) 758 return -EINVAL; 759 760 if (hw->max_report_rates == 0) 761 hw->max_report_rates = hw->max_rates; 762 763 /* 764 * generic code guarantees at least one band, 765 * set this very early because much code assumes 766 * that hw.conf.channel is assigned 767 */ 768 channels = 0; 769 max_bitrates = 0; 770 supp_ht = false; 771 supp_vht = false; 772 for (band = 0; band < IEEE80211_NUM_BANDS; band++) { 773 struct ieee80211_supported_band *sband; 774 775 sband = local->hw.wiphy->bands[band]; 776 if (!sband) 777 continue; 778 if (!local->oper_channel) { 779 /* init channel we're on */ 780 local->hw.conf.channel = 781 local->oper_channel = &sband->channels[0]; 782 local->hw.conf.channel_type = NL80211_CHAN_NO_HT; 783 } 784 channels += sband->n_channels; 785 786 if (max_bitrates < sband->n_bitrates) 787 max_bitrates = sband->n_bitrates; 788 supp_ht = supp_ht || sband->ht_cap.ht_supported; 789 supp_vht = supp_vht || sband->vht_cap.vht_supported; 790 } 791 792 local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) + 793 sizeof(void *) * channels, GFP_KERNEL); 794 if (!local->int_scan_req) 795 return -ENOMEM; 796 797 for (band = 0; band < IEEE80211_NUM_BANDS; band++) { 798 if (!local->hw.wiphy->bands[band]) 799 continue; 800 local->int_scan_req->rates[band] = (u32) -1; 801 } 802 803 /* if low-level driver supports AP, we also support VLAN */ 804 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { 805 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); 806 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN); 807 } 808 809 /* mac80211 always supports monitor */ 810 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); 811 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR); 812 813 /* 814 * mac80211 doesn't support more than 1 channel, and also not more 815 * than one IBSS interface 816 */ 817 for (i = 0; i < hw->wiphy->n_iface_combinations; i++) { 818 const struct ieee80211_iface_combination *c; 819 int j; 820 821 c = &hw->wiphy->iface_combinations[i]; 822 823 if (c->num_different_channels > 1) 824 return -EINVAL; 825 826 for (j = 0; j < c->n_limits; j++) 827 if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) && 828 c->limits[j].max > 1) 829 return -EINVAL; 830 } 831 832 #ifndef CONFIG_MAC80211_MESH 833 /* mesh depends on Kconfig, but drivers should set it if they want */ 834 local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT); 835 #endif 836 837 /* if the underlying driver supports mesh, mac80211 will (at least) 838 * provide routing of mesh authentication frames to userspace */ 839 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT)) 840 local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH; 841 842 /* mac80211 supports control port protocol changing */ 843 local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL; 844 845 if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) 846 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; 847 else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) 848 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC; 849 850 WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) 851 && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK), 852 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"); 853 854 /* 855 * Calculate scan IE length -- we need this to alloc 856 * memory and to subtract from the driver limit. It 857 * includes the DS Params, (extended) supported rates, and HT 858 * information -- SSID is the driver's responsibility. 859 */ 860 local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ + 861 3 /* DS Params */; 862 if (supp_ht) 863 local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); 864 865 if (supp_vht) 866 local->scan_ies_len += 867 2 + sizeof(struct ieee80211_vht_capabilities); 868 869 if (!local->ops->hw_scan) { 870 /* For hw_scan, driver needs to set these up. */ 871 local->hw.wiphy->max_scan_ssids = 4; 872 local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; 873 } 874 875 /* 876 * If the driver supports any scan IEs, then assume the 877 * limit includes the IEs mac80211 will add, otherwise 878 * leave it at zero and let the driver sort it out; we 879 * still pass our IEs to the driver but userspace will 880 * not be allowed to in that case. 881 */ 882 if (local->hw.wiphy->max_scan_ie_len) 883 local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len; 884 885 /* Set up cipher suites unless driver already did */ 886 if (!local->hw.wiphy->cipher_suites) { 887 local->hw.wiphy->cipher_suites = cipher_suites; 888 local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); 889 if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE)) 890 local->hw.wiphy->n_cipher_suites--; 891 } 892 if (IS_ERR(local->wep_tx_tfm) || IS_ERR(local->wep_rx_tfm)) { 893 if (local->hw.wiphy->cipher_suites == cipher_suites) { 894 local->hw.wiphy->cipher_suites += 2; 895 local->hw.wiphy->n_cipher_suites -= 2; 896 } else { 897 u32 *suites; 898 int r, w = 0; 899 900 /* Filter out WEP */ 901 902 suites = kmemdup( 903 local->hw.wiphy->cipher_suites, 904 sizeof(u32) * local->hw.wiphy->n_cipher_suites, 905 GFP_KERNEL); 906 if (!suites) 907 return -ENOMEM; 908 for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { 909 u32 suite = local->hw.wiphy->cipher_suites[r]; 910 if (suite == WLAN_CIPHER_SUITE_WEP40 || 911 suite == WLAN_CIPHER_SUITE_WEP104) 912 continue; 913 suites[w++] = suite; 914 } 915 local->hw.wiphy->cipher_suites = suites; 916 local->hw.wiphy->n_cipher_suites = w; 917 local->wiphy_ciphers_allocated = true; 918 } 919 } 920 921 if (!local->ops->remain_on_channel) 922 local->hw.wiphy->max_remain_on_channel_duration = 5000; 923 924 if (local->ops->sched_scan_start) 925 local->hw.wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; 926 927 /* mac80211 based drivers don't support internal TDLS setup */ 928 if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) 929 local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP; 930 931 result = wiphy_register(local->hw.wiphy); 932 if (result < 0) 933 goto fail_wiphy_register; 934 935 /* 936 * We use the number of queues for feature tests (QoS, HT) internally 937 * so restrict them appropriately. 938 */ 939 if (hw->queues > IEEE80211_MAX_QUEUES) 940 hw->queues = IEEE80211_MAX_QUEUES; 941 942 local->workqueue = 943 alloc_ordered_workqueue(wiphy_name(local->hw.wiphy), 0); 944 if (!local->workqueue) { 945 result = -ENOMEM; 946 goto fail_workqueue; 947 } 948 949 /* 950 * The hardware needs headroom for sending the frame, 951 * and we need some headroom for passing the frame to monitor 952 * interfaces, but never both at the same time. 953 */ 954 local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, 955 IEEE80211_TX_STATUS_HEADROOM); 956 957 debugfs_hw_add(local); 958 959 /* 960 * if the driver doesn't specify a max listen interval we 961 * use 5 which should be a safe default 962 */ 963 if (local->hw.max_listen_interval == 0) 964 local->hw.max_listen_interval = 5; 965 966 local->hw.conf.listen_interval = local->hw.max_listen_interval; 967 968 local->dynamic_ps_forced_timeout = -1; 969 970 result = ieee80211_wep_init(local); 971 if (result < 0) 972 wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", 973 result); 974 975 ieee80211_led_init(local); 976 977 rtnl_lock(); 978 979 result = ieee80211_init_rate_ctrl_alg(local, 980 hw->rate_control_algorithm); 981 if (result < 0) { 982 wiphy_debug(local->hw.wiphy, 983 "Failed to initialize rate control algorithm\n"); 984 goto fail_rate; 985 } 986 987 /* add one default STA interface if supported */ 988 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { 989 result = ieee80211_if_add(local, "wlan%d", NULL, 990 NL80211_IFTYPE_STATION, NULL); 991 if (result) 992 wiphy_warn(local->hw.wiphy, 993 "Failed to add default virtual iface\n"); 994 } 995 996 rtnl_unlock(); 997 998 local->network_latency_notifier.notifier_call = 999 ieee80211_max_network_latency; 1000 result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY, 1001 &local->network_latency_notifier); 1002 if (result) { 1003 rtnl_lock(); 1004 goto fail_pm_qos; 1005 } 1006 1007 #ifdef CONFIG_INET 1008 local->ifa_notifier.notifier_call = ieee80211_ifa_changed; 1009 result = register_inetaddr_notifier(&local->ifa_notifier); 1010 if (result) 1011 goto fail_ifa; 1012 #endif 1013 1014 netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll, 1015 local->hw.napi_weight); 1016 1017 return 0; 1018 1019 #ifdef CONFIG_INET 1020 fail_ifa: 1021 pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, 1022 &local->network_latency_notifier); 1023 rtnl_lock(); 1024 #endif 1025 fail_pm_qos: 1026 ieee80211_led_exit(local); 1027 ieee80211_remove_interfaces(local); 1028 fail_rate: 1029 rtnl_unlock(); 1030 ieee80211_wep_free(local); 1031 sta_info_stop(local); 1032 destroy_workqueue(local->workqueue); 1033 fail_workqueue: 1034 wiphy_unregister(local->hw.wiphy); 1035 fail_wiphy_register: 1036 if (local->wiphy_ciphers_allocated) 1037 kfree(local->hw.wiphy->cipher_suites); 1038 kfree(local->int_scan_req); 1039 return result; 1040 } 1041 EXPORT_SYMBOL(ieee80211_register_hw); 1042 1043 void ieee80211_unregister_hw(struct ieee80211_hw *hw) 1044 { 1045 struct ieee80211_local *local = hw_to_local(hw); 1046 1047 tasklet_kill(&local->tx_pending_tasklet); 1048 tasklet_kill(&local->tasklet); 1049 1050 pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, 1051 &local->network_latency_notifier); 1052 #ifdef CONFIG_INET 1053 unregister_inetaddr_notifier(&local->ifa_notifier); 1054 #endif 1055 1056 rtnl_lock(); 1057 1058 /* 1059 * At this point, interface list manipulations are fine 1060 * because the driver cannot be handing us frames any 1061 * more and the tasklet is killed. 1062 */ 1063 ieee80211_remove_interfaces(local); 1064 1065 rtnl_unlock(); 1066 1067 cancel_work_sync(&local->restart_work); 1068 cancel_work_sync(&local->reconfig_filter); 1069 1070 ieee80211_clear_tx_pending(local); 1071 rate_control_deinitialize(local); 1072 1073 if (skb_queue_len(&local->skb_queue) || 1074 skb_queue_len(&local->skb_queue_unreliable)) 1075 wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); 1076 skb_queue_purge(&local->skb_queue); 1077 skb_queue_purge(&local->skb_queue_unreliable); 1078 skb_queue_purge(&local->rx_skb_queue); 1079 1080 destroy_workqueue(local->workqueue); 1081 wiphy_unregister(local->hw.wiphy); 1082 sta_info_stop(local); 1083 ieee80211_wep_free(local); 1084 ieee80211_led_exit(local); 1085 kfree(local->int_scan_req); 1086 } 1087 EXPORT_SYMBOL(ieee80211_unregister_hw); 1088 1089 static int ieee80211_free_ack_frame(int id, void *p, void *data) 1090 { 1091 WARN_ONCE(1, "Have pending ack frames!\n"); 1092 kfree_skb(p); 1093 return 0; 1094 } 1095 1096 void ieee80211_free_hw(struct ieee80211_hw *hw) 1097 { 1098 struct ieee80211_local *local = hw_to_local(hw); 1099 1100 mutex_destroy(&local->iflist_mtx); 1101 mutex_destroy(&local->mtx); 1102 1103 if (local->wiphy_ciphers_allocated) 1104 kfree(local->hw.wiphy->cipher_suites); 1105 1106 idr_for_each(&local->ack_status_frames, 1107 ieee80211_free_ack_frame, NULL); 1108 idr_destroy(&local->ack_status_frames); 1109 1110 wiphy_free(local->hw.wiphy); 1111 } 1112 EXPORT_SYMBOL(ieee80211_free_hw); 1113 1114 static int __init ieee80211_init(void) 1115 { 1116 struct sk_buff *skb; 1117 int ret; 1118 1119 BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb)); 1120 BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) + 1121 IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); 1122 1123 ret = rc80211_minstrel_init(); 1124 if (ret) 1125 return ret; 1126 1127 ret = rc80211_minstrel_ht_init(); 1128 if (ret) 1129 goto err_minstrel; 1130 1131 ret = rc80211_pid_init(); 1132 if (ret) 1133 goto err_pid; 1134 1135 ret = ieee80211_iface_init(); 1136 if (ret) 1137 goto err_netdev; 1138 1139 return 0; 1140 err_netdev: 1141 rc80211_pid_exit(); 1142 err_pid: 1143 rc80211_minstrel_ht_exit(); 1144 err_minstrel: 1145 rc80211_minstrel_exit(); 1146 1147 return ret; 1148 } 1149 1150 static void __exit ieee80211_exit(void) 1151 { 1152 rc80211_pid_exit(); 1153 rc80211_minstrel_ht_exit(); 1154 rc80211_minstrel_exit(); 1155 1156 if (mesh_allocated) 1157 ieee80211s_stop(); 1158 1159 ieee80211_iface_exit(); 1160 1161 rcu_barrier(); 1162 } 1163 1164 1165 subsys_initcall(ieee80211_init); 1166 module_exit(ieee80211_exit); 1167 1168 MODULE_DESCRIPTION("IEEE 802.11 subsystem"); 1169 MODULE_LICENSE("GPL"); 1170