1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * linux/include/linux/serial_8250.h 4 * 5 * Copyright (C) 2004 Russell King 6 */ 7 #ifndef _LINUX_SERIAL_8250_H 8 #define _LINUX_SERIAL_8250_H 9 10 #include <linux/serial_core.h> 11 #include <linux/serial_reg.h> 12 #include <linux/platform_device.h> 13 14 /* 15 * This is the platform device platform_data structure 16 */ 17 struct plat_serial8250_port { 18 unsigned long iobase; /* io base address */ 19 void __iomem *membase; /* ioremap cookie or NULL */ 20 resource_size_t mapbase; /* resource base */ 21 unsigned int irq; /* interrupt number */ 22 unsigned long irqflags; /* request_irq flags */ 23 unsigned int uartclk; /* UART clock rate */ 24 void *private_data; 25 unsigned char regshift; /* register shift */ 26 unsigned char iotype; /* UPIO_* */ 27 unsigned char hub6; 28 upf_t flags; /* UPF_* flags */ 29 unsigned int type; /* If UPF_FIXED_TYPE */ 30 unsigned int (*serial_in)(struct uart_port *, int); 31 void (*serial_out)(struct uart_port *, int, int); 32 void (*set_termios)(struct uart_port *, 33 struct ktermios *new, 34 struct ktermios *old); 35 void (*set_ldisc)(struct uart_port *, 36 struct ktermios *); 37 unsigned int (*get_mctrl)(struct uart_port *); 38 int (*handle_irq)(struct uart_port *); 39 void (*pm)(struct uart_port *, unsigned int state, 40 unsigned old); 41 void (*handle_break)(struct uart_port *); 42 }; 43 44 /* 45 * Allocate 8250 platform device IDs. Nothing is implied by 46 * the numbering here, except for the legacy entry being -1. 47 */ 48 enum { 49 PLAT8250_DEV_LEGACY = -1, 50 PLAT8250_DEV_PLATFORM, 51 PLAT8250_DEV_PLATFORM1, 52 PLAT8250_DEV_PLATFORM2, 53 PLAT8250_DEV_FOURPORT, 54 PLAT8250_DEV_ACCENT, 55 PLAT8250_DEV_BOCA, 56 PLAT8250_DEV_EXAR_ST16C554, 57 PLAT8250_DEV_HUB6, 58 PLAT8250_DEV_AU1X00, 59 PLAT8250_DEV_SM501, 60 }; 61 62 struct uart_8250_dma; 63 struct uart_8250_port; 64 65 /** 66 * 8250 core driver operations 67 * 68 * @setup_irq() Setup irq handling. The universal 8250 driver links this 69 * port to the irq chain. Other drivers may @request_irq(). 70 * @release_irq() Undo irq handling. The universal 8250 driver unlinks 71 * the port from the irq chain. 72 */ 73 struct uart_8250_ops { 74 int (*setup_irq)(struct uart_8250_port *); 75 void (*release_irq)(struct uart_8250_port *); 76 }; 77 78 struct uart_8250_em485 { 79 struct hrtimer start_tx_timer; /* "rs485 start tx" timer */ 80 struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */ 81 struct hrtimer *active_timer; /* pointer to active timer */ 82 struct uart_8250_port *port; /* for hrtimer callbacks */ 83 }; 84 85 /* 86 * This should be used by drivers which want to register 87 * their own 8250 ports without registering their own 88 * platform device. Using these will make your driver 89 * dependent on the 8250 driver. 90 */ 91 92 struct uart_8250_port { 93 struct uart_port port; 94 struct timer_list timer; /* "no irq" timer */ 95 struct list_head list; /* ports on this IRQ */ 96 u32 capabilities; /* port capabilities */ 97 unsigned short bugs; /* port bugs */ 98 bool fifo_bug; /* min RX trigger if enabled */ 99 unsigned int tx_loadsz; /* transmit fifo load size */ 100 unsigned char acr; 101 unsigned char fcr; 102 unsigned char ier; 103 unsigned char lcr; 104 unsigned char mcr; 105 unsigned char mcr_mask; /* mask of user bits */ 106 unsigned char mcr_force; /* mask of forced bits */ 107 unsigned char cur_iotype; /* Running I/O type */ 108 unsigned int rpm_tx_active; 109 unsigned char canary; /* non-zero during system sleep 110 * if no_console_suspend 111 */ 112 unsigned char probe; 113 #define UART_PROBE_RSA (1 << 0) 114 115 /* 116 * Some bits in registers are cleared on a read, so they must 117 * be saved whenever the register is read but the bits will not 118 * be immediately processed. 119 */ 120 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS 121 unsigned char lsr_saved_flags; 122 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA 123 unsigned char msr_saved_flags; 124 125 struct uart_8250_dma *dma; 126 const struct uart_8250_ops *ops; 127 128 /* 8250 specific callbacks */ 129 int (*dl_read)(struct uart_8250_port *); 130 void (*dl_write)(struct uart_8250_port *, int); 131 132 struct uart_8250_em485 *em485; 133 134 /* Serial port overrun backoff */ 135 struct delayed_work overrun_backoff; 136 u32 overrun_backoff_time_ms; 137 }; 138 139 static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up) 140 { 141 return container_of(up, struct uart_8250_port, port); 142 } 143 144 int serial8250_register_8250_port(struct uart_8250_port *); 145 void serial8250_unregister_port(int line); 146 void serial8250_suspend_port(int line); 147 void serial8250_resume_port(int line); 148 149 extern int early_serial_setup(struct uart_port *port); 150 151 extern int early_serial8250_setup(struct earlycon_device *device, 152 const char *options); 153 extern void serial8250_do_set_termios(struct uart_port *port, 154 struct ktermios *termios, struct ktermios *old); 155 extern void serial8250_do_set_ldisc(struct uart_port *port, 156 struct ktermios *termios); 157 extern unsigned int serial8250_do_get_mctrl(struct uart_port *port); 158 extern int serial8250_do_startup(struct uart_port *port); 159 extern void serial8250_do_shutdown(struct uart_port *port); 160 extern void serial8250_do_pm(struct uart_port *port, unsigned int state, 161 unsigned int oldstate); 162 extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); 163 extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, 164 unsigned int quot, 165 unsigned int quot_frac); 166 extern int fsl8250_handle_irq(struct uart_port *port); 167 int serial8250_handle_irq(struct uart_port *port, unsigned int iir); 168 unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); 169 void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr); 170 void serial8250_tx_chars(struct uart_8250_port *up); 171 unsigned int serial8250_modem_status(struct uart_8250_port *up); 172 void serial8250_init_port(struct uart_8250_port *up); 173 void serial8250_set_defaults(struct uart_8250_port *up); 174 void serial8250_console_write(struct uart_8250_port *up, const char *s, 175 unsigned int count); 176 int serial8250_console_setup(struct uart_port *port, char *options, bool probe); 177 178 extern void serial8250_set_isa_configurator(void (*v) 179 (int port, struct uart_port *up, 180 u32 *capabilities)); 181 182 #endif 183