1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Framework and drivers for configuring and reading different PHYs 4 * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c 5 * 6 * Author: Andy Fleming 7 * 8 * Copyright (c) 2004 Freescale Semiconductor, Inc. 9 */ 10 11 #ifndef __PHY_H 12 #define __PHY_H 13 14 #include <linux/compiler.h> 15 #include <linux/spinlock.h> 16 #include <linux/ethtool.h> 17 #include <linux/linkmode.h> 18 #include <linux/netlink.h> 19 #include <linux/mdio.h> 20 #include <linux/mii.h> 21 #include <linux/mii_timestamper.h> 22 #include <linux/module.h> 23 #include <linux/timer.h> 24 #include <linux/workqueue.h> 25 #include <linux/mod_devicetable.h> 26 #include <linux/u64_stats_sync.h> 27 #include <linux/irqreturn.h> 28 #include <linux/iopoll.h> 29 #include <linux/refcount.h> 30 31 #include <linux/atomic.h> 32 33 #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ 34 SUPPORTED_TP | \ 35 SUPPORTED_MII) 36 37 #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ 38 SUPPORTED_10baseT_Full) 39 40 #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ 41 SUPPORTED_100baseT_Full) 42 43 #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ 44 SUPPORTED_1000baseT_Full) 45 46 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; 47 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; 48 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; 49 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; 50 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init; 51 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init; 52 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init; 53 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init; 54 55 #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features) 56 #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features) 57 #define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features) 58 #define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features) 59 #define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features) 60 #define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features) 61 #define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features) 62 #define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features) 63 64 extern const int phy_basic_ports_array[3]; 65 extern const int phy_fibre_port_array[1]; 66 extern const int phy_all_ports_features_array[7]; 67 extern const int phy_10_100_features_array[4]; 68 extern const int phy_basic_t1_features_array[2]; 69 extern const int phy_gbit_features_array[2]; 70 extern const int phy_10gbit_features_array[1]; 71 72 /* 73 * Set phydev->irq to PHY_POLL if interrupts are not supported, 74 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if 75 * the attached driver handles the interrupt 76 */ 77 #define PHY_POLL -1 78 #define PHY_IGNORE_INTERRUPT -2 79 80 #define PHY_IS_INTERNAL 0x00000001 81 #define PHY_RST_AFTER_CLK_EN 0x00000002 82 #define PHY_POLL_CABLE_TEST 0x00000004 83 #define MDIO_DEVICE_IS_PHY 0x80000000 84 85 /** 86 * enum phy_interface_t - Interface Mode definitions 87 * 88 * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch 89 * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined 90 * @PHY_INTERFACE_MODE_MII: Median-independent interface 91 * @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface 92 * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface 93 * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface 94 * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface 95 * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface 96 * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface 97 * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay 98 * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay 99 * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay 100 * @PHY_INTERFACE_MODE_RTBI: Reduced TBI 101 * @PHY_INTERFACE_MODE_SMII: ??? MII 102 * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface 103 * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface 104 * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax 105 * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII 106 * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII 107 * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX 108 * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX 109 * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI 110 * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface 111 * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR 112 * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII 113 * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN 114 * @PHY_INTERFACE_MODE_MAX: Book keeping 115 * 116 * Describes the interface between the MAC and PHY. 117 */ 118 typedef enum { 119 PHY_INTERFACE_MODE_NA, 120 PHY_INTERFACE_MODE_INTERNAL, 121 PHY_INTERFACE_MODE_MII, 122 PHY_INTERFACE_MODE_GMII, 123 PHY_INTERFACE_MODE_SGMII, 124 PHY_INTERFACE_MODE_TBI, 125 PHY_INTERFACE_MODE_REVMII, 126 PHY_INTERFACE_MODE_RMII, 127 PHY_INTERFACE_MODE_RGMII, 128 PHY_INTERFACE_MODE_RGMII_ID, 129 PHY_INTERFACE_MODE_RGMII_RXID, 130 PHY_INTERFACE_MODE_RGMII_TXID, 131 PHY_INTERFACE_MODE_RTBI, 132 PHY_INTERFACE_MODE_SMII, 133 PHY_INTERFACE_MODE_XGMII, 134 PHY_INTERFACE_MODE_XLGMII, 135 PHY_INTERFACE_MODE_MOCA, 136 PHY_INTERFACE_MODE_QSGMII, 137 PHY_INTERFACE_MODE_TRGMII, 138 PHY_INTERFACE_MODE_1000BASEX, 139 PHY_INTERFACE_MODE_2500BASEX, 140 PHY_INTERFACE_MODE_RXAUI, 141 PHY_INTERFACE_MODE_XAUI, 142 /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */ 143 PHY_INTERFACE_MODE_10GBASER, 144 PHY_INTERFACE_MODE_USXGMII, 145 /* 10GBASE-KR - with Clause 73 AN */ 146 PHY_INTERFACE_MODE_10GKR, 147 PHY_INTERFACE_MODE_MAX, 148 } phy_interface_t; 149 150 /* 151 * phy_supported_speeds - return all speeds currently supported by a PHY device 152 */ 153 unsigned int phy_supported_speeds(struct phy_device *phy, 154 unsigned int *speeds, 155 unsigned int size); 156 157 /** 158 * phy_modes - map phy_interface_t enum to device tree binding of phy-mode 159 * @interface: enum phy_interface_t value 160 * 161 * Description: maps enum &phy_interface_t defined in this file 162 * into the device tree binding of 'phy-mode', so that Ethernet 163 * device driver can get PHY interface from device tree. 164 */ 165 static inline const char *phy_modes(phy_interface_t interface) 166 { 167 switch (interface) { 168 case PHY_INTERFACE_MODE_NA: 169 return ""; 170 case PHY_INTERFACE_MODE_INTERNAL: 171 return "internal"; 172 case PHY_INTERFACE_MODE_MII: 173 return "mii"; 174 case PHY_INTERFACE_MODE_GMII: 175 return "gmii"; 176 case PHY_INTERFACE_MODE_SGMII: 177 return "sgmii"; 178 case PHY_INTERFACE_MODE_TBI: 179 return "tbi"; 180 case PHY_INTERFACE_MODE_REVMII: 181 return "rev-mii"; 182 case PHY_INTERFACE_MODE_RMII: 183 return "rmii"; 184 case PHY_INTERFACE_MODE_RGMII: 185 return "rgmii"; 186 case PHY_INTERFACE_MODE_RGMII_ID: 187 return "rgmii-id"; 188 case PHY_INTERFACE_MODE_RGMII_RXID: 189 return "rgmii-rxid"; 190 case PHY_INTERFACE_MODE_RGMII_TXID: 191 return "rgmii-txid"; 192 case PHY_INTERFACE_MODE_RTBI: 193 return "rtbi"; 194 case PHY_INTERFACE_MODE_SMII: 195 return "smii"; 196 case PHY_INTERFACE_MODE_XGMII: 197 return "xgmii"; 198 case PHY_INTERFACE_MODE_XLGMII: 199 return "xlgmii"; 200 case PHY_INTERFACE_MODE_MOCA: 201 return "moca"; 202 case PHY_INTERFACE_MODE_QSGMII: 203 return "qsgmii"; 204 case PHY_INTERFACE_MODE_TRGMII: 205 return "trgmii"; 206 case PHY_INTERFACE_MODE_1000BASEX: 207 return "1000base-x"; 208 case PHY_INTERFACE_MODE_2500BASEX: 209 return "2500base-x"; 210 case PHY_INTERFACE_MODE_RXAUI: 211 return "rxaui"; 212 case PHY_INTERFACE_MODE_XAUI: 213 return "xaui"; 214 case PHY_INTERFACE_MODE_10GBASER: 215 return "10gbase-r"; 216 case PHY_INTERFACE_MODE_USXGMII: 217 return "usxgmii"; 218 case PHY_INTERFACE_MODE_10GKR: 219 return "10gbase-kr"; 220 default: 221 return "unknown"; 222 } 223 } 224 225 226 #define PHY_INIT_TIMEOUT 100000 227 #define PHY_FORCE_TIMEOUT 10 228 229 #define PHY_MAX_ADDR 32 230 231 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ 232 #define PHY_ID_FMT "%s:%02x" 233 234 #define MII_BUS_ID_SIZE 61 235 236 struct device; 237 struct phylink; 238 struct sfp_bus; 239 struct sfp_upstream_ops; 240 struct sk_buff; 241 242 /** 243 * struct mdio_bus_stats - Statistics counters for MDIO busses 244 * @transfers: Total number of transfers, i.e. @writes + @reads 245 * @errors: Number of MDIO transfers that returned an error 246 * @writes: Number of write transfers 247 * @reads: Number of read transfers 248 * @syncp: Synchronisation for incrementing statistics 249 */ 250 struct mdio_bus_stats { 251 u64_stats_t transfers; 252 u64_stats_t errors; 253 u64_stats_t writes; 254 u64_stats_t reads; 255 /* Must be last, add new statistics above */ 256 struct u64_stats_sync syncp; 257 }; 258 259 /** 260 * struct phy_package_shared - Shared information in PHY packages 261 * @addr: Common PHY address used to combine PHYs in one package 262 * @refcnt: Number of PHYs connected to this shared data 263 * @flags: Initialization of PHY package 264 * @priv_size: Size of the shared private data @priv 265 * @priv: Driver private data shared across a PHY package 266 * 267 * Represents a shared structure between different phydev's in the same 268 * package, for example a quad PHY. See phy_package_join() and 269 * phy_package_leave(). 270 */ 271 struct phy_package_shared { 272 int addr; 273 refcount_t refcnt; 274 unsigned long flags; 275 size_t priv_size; 276 277 /* private data pointer */ 278 /* note that this pointer is shared between different phydevs and 279 * the user has to take care of appropriate locking. It is allocated 280 * and freed automatically by phy_package_join() and 281 * phy_package_leave(). 282 */ 283 void *priv; 284 }; 285 286 /* used as bit number in atomic bitops */ 287 #define PHY_SHARED_F_INIT_DONE 0 288 #define PHY_SHARED_F_PROBE_DONE 1 289 290 /** 291 * struct mii_bus - Represents an MDIO bus 292 * 293 * @owner: Who owns this device 294 * @name: User friendly name for this MDIO device, or driver name 295 * @id: Unique identifier for this bus, typical from bus hierarchy 296 * @priv: Driver private data 297 * 298 * The Bus class for PHYs. Devices which provide access to 299 * PHYs should register using this structure 300 */ 301 struct mii_bus { 302 struct module *owner; 303 const char *name; 304 char id[MII_BUS_ID_SIZE]; 305 void *priv; 306 /** @read: Perform a read transfer on the bus */ 307 int (*read)(struct mii_bus *bus, int addr, int regnum); 308 /** @write: Perform a write transfer on the bus */ 309 int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); 310 /** @reset: Perform a reset of the bus */ 311 int (*reset)(struct mii_bus *bus); 312 313 /** @stats: Statistic counters per device on the bus */ 314 struct mdio_bus_stats stats[PHY_MAX_ADDR]; 315 316 /** 317 * @mdio_lock: A lock to ensure that only one thing can read/write 318 * the MDIO bus at a time 319 */ 320 struct mutex mdio_lock; 321 322 /** @parent: Parent device of this bus */ 323 struct device *parent; 324 /** @state: State of bus structure */ 325 enum { 326 MDIOBUS_ALLOCATED = 1, 327 MDIOBUS_REGISTERED, 328 MDIOBUS_UNREGISTERED, 329 MDIOBUS_RELEASED, 330 } state; 331 332 /** @dev: Kernel device representation */ 333 struct device dev; 334 335 /** @mdio_map: list of all MDIO devices on bus */ 336 struct mdio_device *mdio_map[PHY_MAX_ADDR]; 337 338 /** @phy_mask: PHY addresses to be ignored when probing */ 339 u32 phy_mask; 340 341 /** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ 342 u32 phy_ignore_ta_mask; 343 344 /** 345 * @irq: An array of interrupts, each PHY's interrupt at the index 346 * matching its address 347 */ 348 int irq[PHY_MAX_ADDR]; 349 350 /** @reset_delay_us: GPIO reset pulse width in microseconds */ 351 int reset_delay_us; 352 /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ 353 int reset_post_delay_us; 354 /** @reset_gpiod: Reset GPIO descriptor pointer */ 355 struct gpio_desc *reset_gpiod; 356 357 /** @probe_capabilities: bus capabilities, used for probing */ 358 enum { 359 MDIOBUS_NO_CAP = 0, 360 MDIOBUS_C22, 361 MDIOBUS_C45, 362 MDIOBUS_C22_C45, 363 } probe_capabilities; 364 365 /** @shared_lock: protect access to the shared element */ 366 struct mutex shared_lock; 367 368 /** @shared: shared state across different PHYs */ 369 struct phy_package_shared *shared[PHY_MAX_ADDR]; 370 }; 371 #define to_mii_bus(d) container_of(d, struct mii_bus, dev) 372 373 struct mii_bus *mdiobus_alloc_size(size_t size); 374 375 /** 376 * mdiobus_alloc - Allocate an MDIO bus structure 377 * 378 * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready 379 * for the driver to register the bus. 380 */ 381 static inline struct mii_bus *mdiobus_alloc(void) 382 { 383 return mdiobus_alloc_size(0); 384 } 385 386 int __mdiobus_register(struct mii_bus *bus, struct module *owner); 387 int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus, 388 struct module *owner); 389 #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) 390 #define devm_mdiobus_register(dev, bus) \ 391 __devm_mdiobus_register(dev, bus, THIS_MODULE) 392 393 void mdiobus_unregister(struct mii_bus *bus); 394 void mdiobus_free(struct mii_bus *bus); 395 struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); 396 static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) 397 { 398 return devm_mdiobus_alloc_size(dev, 0); 399 } 400 401 struct mii_bus *mdio_find_bus(const char *mdio_name); 402 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); 403 404 #define PHY_INTERRUPT_DISABLED false 405 #define PHY_INTERRUPT_ENABLED true 406 407 /** 408 * enum phy_state - PHY state machine states: 409 * 410 * @PHY_DOWN: PHY device and driver are not ready for anything. probe 411 * should be called if and only if the PHY is in this state, 412 * given that the PHY device exists. 413 * - PHY driver probe function will set the state to @PHY_READY 414 * 415 * @PHY_READY: PHY is ready to send and receive packets, but the 416 * controller is not. By default, PHYs which do not implement 417 * probe will be set to this state by phy_probe(). 418 * - start will set the state to UP 419 * 420 * @PHY_UP: The PHY and attached device are ready to do work. 421 * Interrupts should be started here. 422 * - timer moves to @PHY_NOLINK or @PHY_RUNNING 423 * 424 * @PHY_NOLINK: PHY is up, but not currently plugged in. 425 * - irq or timer will set @PHY_RUNNING if link comes back 426 * - phy_stop moves to @PHY_HALTED 427 * 428 * @PHY_RUNNING: PHY is currently up, running, and possibly sending 429 * and/or receiving packets 430 * - irq or timer will set @PHY_NOLINK if link goes down 431 * - phy_stop moves to @PHY_HALTED 432 * 433 * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending 434 * is not expected to work, carrier will be indicated as down. PHY will be 435 * poll once per second, or on interrupt for it current state. 436 * Once complete, move to UP to restart the PHY. 437 * - phy_stop aborts the running test and moves to @PHY_HALTED 438 * 439 * @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or 440 * PHY is in an error state. 441 * - phy_start moves to @PHY_UP 442 */ 443 enum phy_state { 444 PHY_DOWN = 0, 445 PHY_READY, 446 PHY_HALTED, 447 PHY_UP, 448 PHY_RUNNING, 449 PHY_NOLINK, 450 PHY_CABLETEST, 451 }; 452 453 #define MDIO_MMD_NUM 32 454 455 /** 456 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers 457 * @devices_in_package: IEEE 802.3 devices in package register value. 458 * @mmds_present: bit vector of MMDs present. 459 * @device_ids: The device identifer for each present device. 460 */ 461 struct phy_c45_device_ids { 462 u32 devices_in_package; 463 u32 mmds_present; 464 u32 device_ids[MDIO_MMD_NUM]; 465 }; 466 467 struct macsec_context; 468 struct macsec_ops; 469 470 /** 471 * struct phy_device - An instance of a PHY 472 * 473 * @mdio: MDIO bus this PHY is on 474 * @drv: Pointer to the driver for this PHY instance 475 * @phy_id: UID for this device found during discovery 476 * @c45_ids: 802.3-c45 Device Identifiers if is_c45. 477 * @is_c45: Set to true if this PHY uses clause 45 addressing. 478 * @is_internal: Set to true if this PHY is internal to a MAC. 479 * @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc. 480 * @is_gigabit_capable: Set to true if PHY supports 1000Mbps 481 * @has_fixups: Set to true if this PHY has fixups/quirks. 482 * @suspended: Set to true if this PHY has been suspended successfully. 483 * @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus. 484 * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. 485 * @loopback_enabled: Set true if this PHY has been loopbacked successfully. 486 * @downshifted_rate: Set true if link speed has been downshifted. 487 * @state: State of the PHY for management purposes 488 * @dev_flags: Device-specific flags used by the PHY driver. 489 * @irq: IRQ number of the PHY's interrupt (-1 if none) 490 * @phy_timer: The timer for handling the state machine 491 * @phylink: Pointer to phylink instance for this PHY 492 * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached 493 * @sfp_bus: SFP bus attached to this PHY's fiber port 494 * @attached_dev: The attached enet driver's device instance ptr 495 * @adjust_link: Callback for the enet controller to respond to changes: in the 496 * link state. 497 * @phy_link_change: Callback for phylink for notification of link change 498 * @macsec_ops: MACsec offloading ops. 499 * 500 * @speed: Current link speed 501 * @duplex: Current duplex 502 * @pause: Current pause 503 * @asym_pause: Current asymmetric pause 504 * @supported: Combined MAC/PHY supported linkmodes 505 * @advertising: Currently advertised linkmodes 506 * @adv_old: Saved advertised while power saving for WoL 507 * @lp_advertising: Current link partner advertised linkmodes 508 * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited 509 * @autoneg: Flag autoneg being used 510 * @link: Current link state 511 * @autoneg_complete: Flag auto negotiation of the link has completed 512 * @mdix: Current crossover 513 * @mdix_ctrl: User setting of crossover 514 * @interrupts: Flag interrupts have been enabled 515 * @interface: enum phy_interface_t value 516 * @skb: Netlink message for cable diagnostics 517 * @nest: Netlink nest used for cable diagnostics 518 * @ehdr: nNtlink header for cable diagnostics 519 * @phy_led_triggers: Array of LED triggers 520 * @phy_num_led_triggers: Number of triggers in @phy_led_triggers 521 * @led_link_trigger: LED trigger for link up/down 522 * @last_triggered: last LED trigger for link speed 523 * @master_slave_set: User requested master/slave configuration 524 * @master_slave_get: Current master/slave advertisement 525 * @master_slave_state: Current master/slave configuration 526 * @mii_ts: Pointer to time stamper callbacks 527 * @lock: Mutex for serialization access to PHY 528 * @state_queue: Work queue for state machine 529 * @shared: Pointer to private data shared by phys in one package 530 * @priv: Pointer to driver private data 531 * 532 * interrupts currently only supports enabled or disabled, 533 * but could be changed in the future to support enabling 534 * and disabling specific interrupts 535 * 536 * Contains some infrastructure for polling and interrupt 537 * handling, as well as handling shifts in PHY hardware state 538 */ 539 struct phy_device { 540 struct mdio_device mdio; 541 542 /* Information about the PHY type */ 543 /* And management functions */ 544 struct phy_driver *drv; 545 546 u32 phy_id; 547 548 struct phy_c45_device_ids c45_ids; 549 unsigned is_c45:1; 550 unsigned is_internal:1; 551 unsigned is_pseudo_fixed_link:1; 552 unsigned is_gigabit_capable:1; 553 unsigned has_fixups:1; 554 unsigned suspended:1; 555 unsigned suspended_by_mdio_bus:1; 556 unsigned sysfs_links:1; 557 unsigned loopback_enabled:1; 558 unsigned downshifted_rate:1; 559 560 unsigned autoneg:1; 561 /* The most recently read link state */ 562 unsigned link:1; 563 unsigned autoneg_complete:1; 564 565 /* Interrupts are enabled */ 566 unsigned interrupts:1; 567 568 enum phy_state state; 569 570 u32 dev_flags; 571 572 phy_interface_t interface; 573 574 /* 575 * forced speed & duplex (no autoneg) 576 * partner speed & duplex & pause (autoneg) 577 */ 578 int speed; 579 int duplex; 580 int pause; 581 int asym_pause; 582 u8 master_slave_get; 583 u8 master_slave_set; 584 u8 master_slave_state; 585 586 /* Union of PHY and Attached devices' supported link modes */ 587 /* See ethtool.h for more info */ 588 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); 589 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); 590 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); 591 /* used with phy_speed_down */ 592 __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); 593 594 /* Energy efficient ethernet modes which should be prohibited */ 595 u32 eee_broken_modes; 596 597 #ifdef CONFIG_LED_TRIGGER_PHY 598 struct phy_led_trigger *phy_led_triggers; 599 unsigned int phy_num_led_triggers; 600 struct phy_led_trigger *last_triggered; 601 602 struct phy_led_trigger *led_link_trigger; 603 #endif 604 605 /* 606 * Interrupt number for this PHY 607 * -1 means no interrupt 608 */ 609 int irq; 610 611 /* private data pointer */ 612 /* For use by PHYs to maintain extra state */ 613 void *priv; 614 615 /* shared data pointer */ 616 /* For use by PHYs inside the same package that need a shared state. */ 617 struct phy_package_shared *shared; 618 619 /* Reporting cable test results */ 620 struct sk_buff *skb; 621 void *ehdr; 622 struct nlattr *nest; 623 624 /* Interrupt and Polling infrastructure */ 625 struct delayed_work state_queue; 626 627 struct mutex lock; 628 629 /* This may be modified under the rtnl lock */ 630 bool sfp_bus_attached; 631 struct sfp_bus *sfp_bus; 632 struct phylink *phylink; 633 struct net_device *attached_dev; 634 struct mii_timestamper *mii_ts; 635 636 u8 mdix; 637 u8 mdix_ctrl; 638 639 void (*phy_link_change)(struct phy_device *phydev, bool up); 640 void (*adjust_link)(struct net_device *dev); 641 642 #if IS_ENABLED(CONFIG_MACSEC) 643 /* MACsec management functions */ 644 const struct macsec_ops *macsec_ops; 645 #endif 646 }; 647 #define to_phy_device(d) container_of(to_mdio_device(d), \ 648 struct phy_device, mdio) 649 650 /** 651 * struct phy_tdr_config - Configuration of a TDR raw test 652 * 653 * @first: Distance for first data collection point 654 * @last: Distance for last data collection point 655 * @step: Step between data collection points 656 * @pair: Bitmap of cable pairs to collect data for 657 * 658 * A structure containing possible configuration parameters 659 * for a TDR cable test. The driver does not need to implement 660 * all the parameters, but should report what is actually used. 661 * All distances are in centimeters. 662 */ 663 struct phy_tdr_config { 664 u32 first; 665 u32 last; 666 u32 step; 667 s8 pair; 668 }; 669 #define PHY_PAIR_ALL -1 670 671 /** 672 * struct phy_driver - Driver structure for a particular PHY type 673 * 674 * @mdiodrv: Data common to all MDIO devices 675 * @phy_id: The result of reading the UID registers of this PHY 676 * type, and ANDing them with the phy_id_mask. This driver 677 * only works for PHYs with IDs which match this field 678 * @name: The friendly name of this PHY type 679 * @phy_id_mask: Defines the important bits of the phy_id 680 * @features: A mandatory list of features (speed, duplex, etc) 681 * supported by this PHY 682 * @flags: A bitfield defining certain other features this PHY 683 * supports (like interrupts) 684 * @driver_data: Static driver data 685 * 686 * All functions are optional. If config_aneg or read_status 687 * are not implemented, the phy core uses the genphy versions. 688 * Note that none of these functions should be called from 689 * interrupt time. The goal is for the bus read/write functions 690 * to be able to block when the bus transaction is happening, 691 * and be freed up by an interrupt (The MPC85xx has this ability, 692 * though it is not currently supported in the driver). 693 */ 694 struct phy_driver { 695 struct mdio_driver_common mdiodrv; 696 u32 phy_id; 697 char *name; 698 u32 phy_id_mask; 699 const unsigned long * const features; 700 u32 flags; 701 const void *driver_data; 702 703 /** 704 * @soft_reset: Called to issue a PHY software reset 705 */ 706 int (*soft_reset)(struct phy_device *phydev); 707 708 /** 709 * @config_init: Called to initialize the PHY, 710 * including after a reset 711 */ 712 int (*config_init)(struct phy_device *phydev); 713 714 /** 715 * @probe: Called during discovery. Used to set 716 * up device-specific structures, if any 717 */ 718 int (*probe)(struct phy_device *phydev); 719 720 /** 721 * @get_features: Probe the hardware to determine what 722 * abilities it has. Should only set phydev->supported. 723 */ 724 int (*get_features)(struct phy_device *phydev); 725 726 /* PHY Power Management */ 727 /** @suspend: Suspend the hardware, saving state if needed */ 728 int (*suspend)(struct phy_device *phydev); 729 /** @resume: Resume the hardware, restoring state if needed */ 730 int (*resume)(struct phy_device *phydev); 731 732 /** 733 * @config_aneg: Configures the advertisement and resets 734 * autonegotiation if phydev->autoneg is on, 735 * forces the speed to the current settings in phydev 736 * if phydev->autoneg is off 737 */ 738 int (*config_aneg)(struct phy_device *phydev); 739 740 /** @aneg_done: Determines the auto negotiation result */ 741 int (*aneg_done)(struct phy_device *phydev); 742 743 /** @read_status: Determines the negotiated speed and duplex */ 744 int (*read_status)(struct phy_device *phydev); 745 746 /** @ack_interrupt: Clears any pending interrupts */ 747 int (*ack_interrupt)(struct phy_device *phydev); 748 749 /** @config_intr: Enables or disables interrupts */ 750 int (*config_intr)(struct phy_device *phydev); 751 752 /** 753 * @did_interrupt: Checks if the PHY generated an interrupt. 754 * For multi-PHY devices with shared PHY interrupt pin 755 * Set interrupt bits have to be cleared. 756 */ 757 int (*did_interrupt)(struct phy_device *phydev); 758 759 /** @handle_interrupt: Override default interrupt handling */ 760 irqreturn_t (*handle_interrupt)(struct phy_device *phydev); 761 762 /** @remove: Clears up any memory if needed */ 763 void (*remove)(struct phy_device *phydev); 764 765 /** 766 * @match_phy_device: Returns true if this is a suitable 767 * driver for the given phydev. If NULL, matching is based on 768 * phy_id and phy_id_mask. 769 */ 770 int (*match_phy_device)(struct phy_device *phydev); 771 772 /** 773 * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY 774 * register changes to enable Wake on LAN, so set_wol is 775 * provided to be called in the ethernet driver's set_wol 776 * function. 777 */ 778 int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); 779 780 /** 781 * @get_wol: See set_wol, but for checking whether Wake on LAN 782 * is enabled. 783 */ 784 void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); 785 786 /** 787 * @link_change_notify: Called to inform a PHY device driver 788 * when the core is about to change the link state. This 789 * callback is supposed to be used as fixup hook for drivers 790 * that need to take action when the link state 791 * changes. Drivers are by no means allowed to mess with the 792 * PHY device structure in their implementations. 793 */ 794 void (*link_change_notify)(struct phy_device *dev); 795 796 /** 797 * @read_mmd: PHY specific driver override for reading a MMD 798 * register. This function is optional for PHY specific 799 * drivers. When not provided, the default MMD read function 800 * will be used by phy_read_mmd(), which will use either a 801 * direct read for Clause 45 PHYs or an indirect read for 802 * Clause 22 PHYs. devnum is the MMD device number within the 803 * PHY device, regnum is the register within the selected MMD 804 * device. 805 */ 806 int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); 807 808 /** 809 * @write_mmd: PHY specific driver override for writing a MMD 810 * register. This function is optional for PHY specific 811 * drivers. When not provided, the default MMD write function 812 * will be used by phy_write_mmd(), which will use either a 813 * direct write for Clause 45 PHYs, or an indirect write for 814 * Clause 22 PHYs. devnum is the MMD device number within the 815 * PHY device, regnum is the register within the selected MMD 816 * device. val is the value to be written. 817 */ 818 int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, 819 u16 val); 820 821 /** @read_page: Return the current PHY register page number */ 822 int (*read_page)(struct phy_device *dev); 823 /** @write_page: Set the current PHY register page number */ 824 int (*write_page)(struct phy_device *dev, int page); 825 826 /** 827 * @module_info: Get the size and type of the eeprom contained 828 * within a plug-in module 829 */ 830 int (*module_info)(struct phy_device *dev, 831 struct ethtool_modinfo *modinfo); 832 833 /** 834 * @module_eeprom: Get the eeprom information from the plug-in 835 * module 836 */ 837 int (*module_eeprom)(struct phy_device *dev, 838 struct ethtool_eeprom *ee, u8 *data); 839 840 /** @cable_test_start: Start a cable test */ 841 int (*cable_test_start)(struct phy_device *dev); 842 843 /** @cable_test_tdr_start: Start a raw TDR cable test */ 844 int (*cable_test_tdr_start)(struct phy_device *dev, 845 const struct phy_tdr_config *config); 846 847 /** 848 * @cable_test_get_status: Once per second, or on interrupt, 849 * request the status of the test. 850 */ 851 int (*cable_test_get_status)(struct phy_device *dev, bool *finished); 852 853 /* Get statistics from the PHY using ethtool */ 854 /** @get_sset_count: Number of statistic counters */ 855 int (*get_sset_count)(struct phy_device *dev); 856 /** @get_strings: Names of the statistic counters */ 857 void (*get_strings)(struct phy_device *dev, u8 *data); 858 /** @get_stats: Return the statistic counter values */ 859 void (*get_stats)(struct phy_device *dev, 860 struct ethtool_stats *stats, u64 *data); 861 862 /* Get and Set PHY tunables */ 863 /** @get_tunable: Return the value of a tunable */ 864 int (*get_tunable)(struct phy_device *dev, 865 struct ethtool_tunable *tuna, void *data); 866 /** @set_tunable: Set the value of a tunable */ 867 int (*set_tunable)(struct phy_device *dev, 868 struct ethtool_tunable *tuna, 869 const void *data); 870 /** @set_loopback: Set the loopback mood of the PHY */ 871 int (*set_loopback)(struct phy_device *dev, bool enable); 872 /** @get_sqi: Get the signal quality indication */ 873 int (*get_sqi)(struct phy_device *dev); 874 /** @get_sqi_max: Get the maximum signal quality indication */ 875 int (*get_sqi_max)(struct phy_device *dev); 876 }; 877 #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ 878 struct phy_driver, mdiodrv) 879 880 #define PHY_ANY_ID "MATCH ANY PHY" 881 #define PHY_ANY_UID 0xffffffff 882 883 #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) 884 #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) 885 #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) 886 887 /* A Structure for boards to register fixups with the PHY Lib */ 888 struct phy_fixup { 889 struct list_head list; 890 char bus_id[MII_BUS_ID_SIZE + 3]; 891 u32 phy_uid; 892 u32 phy_uid_mask; 893 int (*run)(struct phy_device *phydev); 894 }; 895 896 const char *phy_speed_to_str(int speed); 897 const char *phy_duplex_to_str(unsigned int duplex); 898 899 /* A structure for mapping a particular speed and duplex 900 * combination to a particular SUPPORTED and ADVERTISED value 901 */ 902 struct phy_setting { 903 u32 speed; 904 u8 duplex; 905 u8 bit; 906 }; 907 908 const struct phy_setting * 909 phy_lookup_setting(int speed, int duplex, const unsigned long *mask, 910 bool exact); 911 size_t phy_speeds(unsigned int *speeds, size_t size, 912 unsigned long *mask); 913 void of_set_phy_supported(struct phy_device *phydev); 914 void of_set_phy_eee_broken(struct phy_device *phydev); 915 int phy_speed_down_core(struct phy_device *phydev); 916 917 /** 918 * phy_is_started - Convenience function to check whether PHY is started 919 * @phydev: The phy_device struct 920 */ 921 static inline bool phy_is_started(struct phy_device *phydev) 922 { 923 return phydev->state >= PHY_UP; 924 } 925 926 void phy_resolve_aneg_pause(struct phy_device *phydev); 927 void phy_resolve_aneg_linkmode(struct phy_device *phydev); 928 void phy_check_downshift(struct phy_device *phydev); 929 930 /** 931 * phy_read - Convenience function for reading a given PHY register 932 * @phydev: the phy_device struct 933 * @regnum: register number to read 934 * 935 * NOTE: MUST NOT be called from interrupt context, 936 * because the bus read/write functions may wait for an interrupt 937 * to conclude the operation. 938 */ 939 static inline int phy_read(struct phy_device *phydev, u32 regnum) 940 { 941 return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); 942 } 943 944 #define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ 945 timeout_us, sleep_before_read) \ 946 ({ \ 947 int __ret = read_poll_timeout(phy_read, val, (cond) || val < 0, \ 948 sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ 949 if (val < 0) \ 950 __ret = val; \ 951 if (__ret) \ 952 phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ 953 __ret; \ 954 }) 955 956 957 /** 958 * __phy_read - convenience function for reading a given PHY register 959 * @phydev: the phy_device struct 960 * @regnum: register number to read 961 * 962 * The caller must have taken the MDIO bus lock. 963 */ 964 static inline int __phy_read(struct phy_device *phydev, u32 regnum) 965 { 966 return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); 967 } 968 969 /** 970 * phy_write - Convenience function for writing a given PHY register 971 * @phydev: the phy_device struct 972 * @regnum: register number to write 973 * @val: value to write to @regnum 974 * 975 * NOTE: MUST NOT be called from interrupt context, 976 * because the bus read/write functions may wait for an interrupt 977 * to conclude the operation. 978 */ 979 static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) 980 { 981 return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); 982 } 983 984 /** 985 * __phy_write - Convenience function for writing a given PHY register 986 * @phydev: the phy_device struct 987 * @regnum: register number to write 988 * @val: value to write to @regnum 989 * 990 * The caller must have taken the MDIO bus lock. 991 */ 992 static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val) 993 { 994 return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, 995 val); 996 } 997 998 /** 999 * __phy_modify_changed() - Convenience function for modifying a PHY register 1000 * @phydev: a pointer to a &struct phy_device 1001 * @regnum: register number 1002 * @mask: bit mask of bits to clear 1003 * @set: bit mask of bits to set 1004 * 1005 * Unlocked helper function which allows a PHY register to be modified as 1006 * new register value = (old register value & ~mask) | set 1007 * 1008 * Returns negative errno, 0 if there was no change, and 1 in case of change 1009 */ 1010 static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, 1011 u16 mask, u16 set) 1012 { 1013 return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, 1014 regnum, mask, set); 1015 } 1016 1017 /* 1018 * phy_read_mmd - Convenience function for reading a register 1019 * from an MMD on a given PHY. 1020 */ 1021 int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); 1022 1023 /** 1024 * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a 1025 * condition is met or a timeout occurs 1026 * 1027 * @phydev: The phy_device struct 1028 * @devaddr: The MMD to read from 1029 * @regnum: The register on the MMD to read 1030 * @val: Variable to read the register into 1031 * @cond: Break condition (usually involving @val) 1032 * @sleep_us: Maximum time to sleep between reads in us (0 1033 * tight-loops). Should be less than ~20ms since usleep_range 1034 * is used (see Documentation/timers/timers-howto.rst). 1035 * @timeout_us: Timeout in us, 0 means never timeout 1036 * @sleep_before_read: if it is true, sleep @sleep_us before read. 1037 * Returns 0 on success and -ETIMEDOUT upon a timeout. In either 1038 * case, the last read value at @args is stored in @val. Must not 1039 * be called from atomic context if sleep_us or timeout_us are used. 1040 */ 1041 #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ 1042 sleep_us, timeout_us, sleep_before_read) \ 1043 ({ \ 1044 int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \ 1045 sleep_us, timeout_us, sleep_before_read, \ 1046 phydev, devaddr, regnum); \ 1047 if (val < 0) \ 1048 __ret = val; \ 1049 if (__ret) \ 1050 phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ 1051 __ret; \ 1052 }) 1053 1054 /* 1055 * __phy_read_mmd - Convenience function for reading a register 1056 * from an MMD on a given PHY. 1057 */ 1058 int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); 1059 1060 /* 1061 * phy_write_mmd - Convenience function for writing a register 1062 * on an MMD on a given PHY. 1063 */ 1064 int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); 1065 1066 /* 1067 * __phy_write_mmd - Convenience function for writing a register 1068 * on an MMD on a given PHY. 1069 */ 1070 int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); 1071 1072 int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, 1073 u16 set); 1074 int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, 1075 u16 set); 1076 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); 1077 int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); 1078 1079 int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, 1080 u16 mask, u16 set); 1081 int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, 1082 u16 mask, u16 set); 1083 int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, 1084 u16 mask, u16 set); 1085 int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, 1086 u16 mask, u16 set); 1087 1088 /** 1089 * __phy_set_bits - Convenience function for setting bits in a PHY register 1090 * @phydev: the phy_device struct 1091 * @regnum: register number to write 1092 * @val: bits to set 1093 * 1094 * The caller must have taken the MDIO bus lock. 1095 */ 1096 static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) 1097 { 1098 return __phy_modify(phydev, regnum, 0, val); 1099 } 1100 1101 /** 1102 * __phy_clear_bits - Convenience function for clearing bits in a PHY register 1103 * @phydev: the phy_device struct 1104 * @regnum: register number to write 1105 * @val: bits to clear 1106 * 1107 * The caller must have taken the MDIO bus lock. 1108 */ 1109 static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum, 1110 u16 val) 1111 { 1112 return __phy_modify(phydev, regnum, val, 0); 1113 } 1114 1115 /** 1116 * phy_set_bits - Convenience function for setting bits in a PHY register 1117 * @phydev: the phy_device struct 1118 * @regnum: register number to write 1119 * @val: bits to set 1120 */ 1121 static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) 1122 { 1123 return phy_modify(phydev, regnum, 0, val); 1124 } 1125 1126 /** 1127 * phy_clear_bits - Convenience function for clearing bits in a PHY register 1128 * @phydev: the phy_device struct 1129 * @regnum: register number to write 1130 * @val: bits to clear 1131 */ 1132 static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) 1133 { 1134 return phy_modify(phydev, regnum, val, 0); 1135 } 1136 1137 /** 1138 * __phy_set_bits_mmd - Convenience function for setting bits in a register 1139 * on MMD 1140 * @phydev: the phy_device struct 1141 * @devad: the MMD containing register to modify 1142 * @regnum: register number to modify 1143 * @val: bits to set 1144 * 1145 * The caller must have taken the MDIO bus lock. 1146 */ 1147 static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad, 1148 u32 regnum, u16 val) 1149 { 1150 return __phy_modify_mmd(phydev, devad, regnum, 0, val); 1151 } 1152 1153 /** 1154 * __phy_clear_bits_mmd - Convenience function for clearing bits in a register 1155 * on MMD 1156 * @phydev: the phy_device struct 1157 * @devad: the MMD containing register to modify 1158 * @regnum: register number to modify 1159 * @val: bits to clear 1160 * 1161 * The caller must have taken the MDIO bus lock. 1162 */ 1163 static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad, 1164 u32 regnum, u16 val) 1165 { 1166 return __phy_modify_mmd(phydev, devad, regnum, val, 0); 1167 } 1168 1169 /** 1170 * phy_set_bits_mmd - Convenience function for setting bits in a register 1171 * on MMD 1172 * @phydev: the phy_device struct 1173 * @devad: the MMD containing register to modify 1174 * @regnum: register number to modify 1175 * @val: bits to set 1176 */ 1177 static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, 1178 u32 regnum, u16 val) 1179 { 1180 return phy_modify_mmd(phydev, devad, regnum, 0, val); 1181 } 1182 1183 /** 1184 * phy_clear_bits_mmd - Convenience function for clearing bits in a register 1185 * on MMD 1186 * @phydev: the phy_device struct 1187 * @devad: the MMD containing register to modify 1188 * @regnum: register number to modify 1189 * @val: bits to clear 1190 */ 1191 static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, 1192 u32 regnum, u16 val) 1193 { 1194 return phy_modify_mmd(phydev, devad, regnum, val, 0); 1195 } 1196 1197 /** 1198 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq 1199 * @phydev: the phy_device struct 1200 * 1201 * NOTE: must be kept in sync with addition/removal of PHY_POLL and 1202 * PHY_IGNORE_INTERRUPT 1203 */ 1204 static inline bool phy_interrupt_is_valid(struct phy_device *phydev) 1205 { 1206 return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; 1207 } 1208 1209 /** 1210 * phy_polling_mode - Convenience function for testing whether polling is 1211 * used to detect PHY status changes 1212 * @phydev: the phy_device struct 1213 */ 1214 static inline bool phy_polling_mode(struct phy_device *phydev) 1215 { 1216 if (phydev->state == PHY_CABLETEST) 1217 if (phydev->drv->flags & PHY_POLL_CABLE_TEST) 1218 return true; 1219 1220 return phydev->irq == PHY_POLL; 1221 } 1222 1223 /** 1224 * phy_has_hwtstamp - Tests whether a PHY time stamp configuration. 1225 * @phydev: the phy_device struct 1226 */ 1227 static inline bool phy_has_hwtstamp(struct phy_device *phydev) 1228 { 1229 return phydev && phydev->mii_ts && phydev->mii_ts->hwtstamp; 1230 } 1231 1232 /** 1233 * phy_has_rxtstamp - Tests whether a PHY supports receive time stamping. 1234 * @phydev: the phy_device struct 1235 */ 1236 static inline bool phy_has_rxtstamp(struct phy_device *phydev) 1237 { 1238 return phydev && phydev->mii_ts && phydev->mii_ts->rxtstamp; 1239 } 1240 1241 /** 1242 * phy_has_tsinfo - Tests whether a PHY reports time stamping and/or 1243 * PTP hardware clock capabilities. 1244 * @phydev: the phy_device struct 1245 */ 1246 static inline bool phy_has_tsinfo(struct phy_device *phydev) 1247 { 1248 return phydev && phydev->mii_ts && phydev->mii_ts->ts_info; 1249 } 1250 1251 /** 1252 * phy_has_txtstamp - Tests whether a PHY supports transmit time stamping. 1253 * @phydev: the phy_device struct 1254 */ 1255 static inline bool phy_has_txtstamp(struct phy_device *phydev) 1256 { 1257 return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp; 1258 } 1259 1260 static inline int phy_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) 1261 { 1262 return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr); 1263 } 1264 1265 static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, 1266 int type) 1267 { 1268 return phydev->mii_ts->rxtstamp(phydev->mii_ts, skb, type); 1269 } 1270 1271 static inline int phy_ts_info(struct phy_device *phydev, 1272 struct ethtool_ts_info *tsinfo) 1273 { 1274 return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo); 1275 } 1276 1277 static inline void phy_txtstamp(struct phy_device *phydev, struct sk_buff *skb, 1278 int type) 1279 { 1280 phydev->mii_ts->txtstamp(phydev->mii_ts, skb, type); 1281 } 1282 1283 /** 1284 * phy_is_internal - Convenience function for testing if a PHY is internal 1285 * @phydev: the phy_device struct 1286 */ 1287 static inline bool phy_is_internal(struct phy_device *phydev) 1288 { 1289 return phydev->is_internal; 1290 } 1291 1292 /** 1293 * phy_interface_mode_is_rgmii - Convenience function for testing if a 1294 * PHY interface mode is RGMII (all variants) 1295 * @mode: the &phy_interface_t enum 1296 */ 1297 static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) 1298 { 1299 return mode >= PHY_INTERFACE_MODE_RGMII && 1300 mode <= PHY_INTERFACE_MODE_RGMII_TXID; 1301 }; 1302 1303 /** 1304 * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z 1305 * negotiation 1306 * @mode: one of &enum phy_interface_t 1307 * 1308 * Returns true if the PHY interface mode uses the 16-bit negotiation 1309 * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) 1310 */ 1311 static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) 1312 { 1313 return mode == PHY_INTERFACE_MODE_1000BASEX || 1314 mode == PHY_INTERFACE_MODE_2500BASEX; 1315 } 1316 1317 /** 1318 * phy_interface_is_rgmii - Convenience function for testing if a PHY interface 1319 * is RGMII (all variants) 1320 * @phydev: the phy_device struct 1321 */ 1322 static inline bool phy_interface_is_rgmii(struct phy_device *phydev) 1323 { 1324 return phy_interface_mode_is_rgmii(phydev->interface); 1325 }; 1326 1327 /** 1328 * phy_is_pseudo_fixed_link - Convenience function for testing if this 1329 * PHY is the CPU port facing side of an Ethernet switch, or similar. 1330 * @phydev: the phy_device struct 1331 */ 1332 static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) 1333 { 1334 return phydev->is_pseudo_fixed_link; 1335 } 1336 1337 int phy_save_page(struct phy_device *phydev); 1338 int phy_select_page(struct phy_device *phydev, int page); 1339 int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); 1340 int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); 1341 int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); 1342 int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum, 1343 u16 mask, u16 set); 1344 int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, 1345 u16 mask, u16 set); 1346 1347 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, 1348 bool is_c45, 1349 struct phy_c45_device_ids *c45_ids); 1350 #if IS_ENABLED(CONFIG_PHYLIB) 1351 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); 1352 int phy_device_register(struct phy_device *phy); 1353 void phy_device_free(struct phy_device *phydev); 1354 #else 1355 static inline 1356 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) 1357 { 1358 return NULL; 1359 } 1360 1361 static inline int phy_device_register(struct phy_device *phy) 1362 { 1363 return 0; 1364 } 1365 1366 static inline void phy_device_free(struct phy_device *phydev) { } 1367 #endif /* CONFIG_PHYLIB */ 1368 void phy_device_remove(struct phy_device *phydev); 1369 int phy_init_hw(struct phy_device *phydev); 1370 int phy_suspend(struct phy_device *phydev); 1371 int phy_resume(struct phy_device *phydev); 1372 int __phy_resume(struct phy_device *phydev); 1373 int phy_loopback(struct phy_device *phydev, bool enable); 1374 void phy_sfp_attach(void *upstream, struct sfp_bus *bus); 1375 void phy_sfp_detach(void *upstream, struct sfp_bus *bus); 1376 int phy_sfp_probe(struct phy_device *phydev, 1377 const struct sfp_upstream_ops *ops); 1378 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, 1379 phy_interface_t interface); 1380 struct phy_device *phy_find_first(struct mii_bus *bus); 1381 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, 1382 u32 flags, phy_interface_t interface); 1383 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, 1384 void (*handler)(struct net_device *), 1385 phy_interface_t interface); 1386 struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, 1387 void (*handler)(struct net_device *), 1388 phy_interface_t interface); 1389 void phy_disconnect(struct phy_device *phydev); 1390 void phy_detach(struct phy_device *phydev); 1391 void phy_start(struct phy_device *phydev); 1392 void phy_stop(struct phy_device *phydev); 1393 int phy_start_aneg(struct phy_device *phydev); 1394 int phy_aneg_done(struct phy_device *phydev); 1395 int phy_speed_down(struct phy_device *phydev, bool sync); 1396 int phy_speed_up(struct phy_device *phydev); 1397 1398 int phy_restart_aneg(struct phy_device *phydev); 1399 int phy_reset_after_clk_enable(struct phy_device *phydev); 1400 1401 #if IS_ENABLED(CONFIG_PHYLIB) 1402 int phy_start_cable_test(struct phy_device *phydev, 1403 struct netlink_ext_ack *extack); 1404 int phy_start_cable_test_tdr(struct phy_device *phydev, 1405 struct netlink_ext_ack *extack, 1406 const struct phy_tdr_config *config); 1407 #else 1408 static inline 1409 int phy_start_cable_test(struct phy_device *phydev, 1410 struct netlink_ext_ack *extack) 1411 { 1412 NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); 1413 return -EOPNOTSUPP; 1414 } 1415 static inline 1416 int phy_start_cable_test_tdr(struct phy_device *phydev, 1417 struct netlink_ext_ack *extack, 1418 const struct phy_tdr_config *config) 1419 { 1420 NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); 1421 return -EOPNOTSUPP; 1422 } 1423 #endif 1424 1425 int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result); 1426 int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair, 1427 u16 cm); 1428 1429 static inline void phy_device_reset(struct phy_device *phydev, int value) 1430 { 1431 mdio_device_reset(&phydev->mdio, value); 1432 } 1433 1434 #define phydev_err(_phydev, format, args...) \ 1435 dev_err(&_phydev->mdio.dev, format, ##args) 1436 1437 #define phydev_info(_phydev, format, args...) \ 1438 dev_info(&_phydev->mdio.dev, format, ##args) 1439 1440 #define phydev_warn(_phydev, format, args...) \ 1441 dev_warn(&_phydev->mdio.dev, format, ##args) 1442 1443 #define phydev_dbg(_phydev, format, args...) \ 1444 dev_dbg(&_phydev->mdio.dev, format, ##args) 1445 1446 static inline const char *phydev_name(const struct phy_device *phydev) 1447 { 1448 return dev_name(&phydev->mdio.dev); 1449 } 1450 1451 static inline void phy_lock_mdio_bus(struct phy_device *phydev) 1452 { 1453 mutex_lock(&phydev->mdio.bus->mdio_lock); 1454 } 1455 1456 static inline void phy_unlock_mdio_bus(struct phy_device *phydev) 1457 { 1458 mutex_unlock(&phydev->mdio.bus->mdio_lock); 1459 } 1460 1461 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) 1462 __printf(2, 3); 1463 char *phy_attached_info_irq(struct phy_device *phydev) 1464 __malloc; 1465 void phy_attached_info(struct phy_device *phydev); 1466 1467 /* Clause 22 PHY */ 1468 int genphy_read_abilities(struct phy_device *phydev); 1469 int genphy_setup_forced(struct phy_device *phydev); 1470 int genphy_restart_aneg(struct phy_device *phydev); 1471 int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart); 1472 int genphy_config_eee_advert(struct phy_device *phydev); 1473 int __genphy_config_aneg(struct phy_device *phydev, bool changed); 1474 int genphy_aneg_done(struct phy_device *phydev); 1475 int genphy_update_link(struct phy_device *phydev); 1476 int genphy_read_lpa(struct phy_device *phydev); 1477 int genphy_read_status_fixed(struct phy_device *phydev); 1478 int genphy_read_status(struct phy_device *phydev); 1479 int genphy_suspend(struct phy_device *phydev); 1480 int genphy_resume(struct phy_device *phydev); 1481 int genphy_loopback(struct phy_device *phydev, bool enable); 1482 int genphy_soft_reset(struct phy_device *phydev); 1483 1484 static inline int genphy_config_aneg(struct phy_device *phydev) 1485 { 1486 return __genphy_config_aneg(phydev, false); 1487 } 1488 1489 static inline int genphy_no_ack_interrupt(struct phy_device *phydev) 1490 { 1491 return 0; 1492 } 1493 static inline int genphy_no_config_intr(struct phy_device *phydev) 1494 { 1495 return 0; 1496 } 1497 int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, 1498 u16 regnum); 1499 int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, 1500 u16 regnum, u16 val); 1501 1502 /* Clause 37 */ 1503 int genphy_c37_config_aneg(struct phy_device *phydev); 1504 int genphy_c37_read_status(struct phy_device *phydev); 1505 1506 /* Clause 45 PHY */ 1507 int genphy_c45_restart_aneg(struct phy_device *phydev); 1508 int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart); 1509 int genphy_c45_aneg_done(struct phy_device *phydev); 1510 int genphy_c45_read_link(struct phy_device *phydev); 1511 int genphy_c45_read_lpa(struct phy_device *phydev); 1512 int genphy_c45_read_pma(struct phy_device *phydev); 1513 int genphy_c45_pma_setup_forced(struct phy_device *phydev); 1514 int genphy_c45_an_config_aneg(struct phy_device *phydev); 1515 int genphy_c45_an_disable_aneg(struct phy_device *phydev); 1516 int genphy_c45_read_mdix(struct phy_device *phydev); 1517 int genphy_c45_pma_read_abilities(struct phy_device *phydev); 1518 int genphy_c45_read_status(struct phy_device *phydev); 1519 int genphy_c45_config_aneg(struct phy_device *phydev); 1520 1521 /* Generic C45 PHY driver */ 1522 extern struct phy_driver genphy_c45_driver; 1523 1524 /* The gen10g_* functions are the old Clause 45 stub */ 1525 int gen10g_config_aneg(struct phy_device *phydev); 1526 1527 static inline int phy_read_status(struct phy_device *phydev) 1528 { 1529 if (!phydev->drv) 1530 return -EIO; 1531 1532 if (phydev->drv->read_status) 1533 return phydev->drv->read_status(phydev); 1534 else 1535 return genphy_read_status(phydev); 1536 } 1537 1538 void phy_driver_unregister(struct phy_driver *drv); 1539 void phy_drivers_unregister(struct phy_driver *drv, int n); 1540 int phy_driver_register(struct phy_driver *new_driver, struct module *owner); 1541 int phy_drivers_register(struct phy_driver *new_driver, int n, 1542 struct module *owner); 1543 void phy_state_machine(struct work_struct *work); 1544 void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies); 1545 void phy_mac_interrupt(struct phy_device *phydev); 1546 void phy_start_machine(struct phy_device *phydev); 1547 void phy_stop_machine(struct phy_device *phydev); 1548 void phy_ethtool_ksettings_get(struct phy_device *phydev, 1549 struct ethtool_link_ksettings *cmd); 1550 int phy_ethtool_ksettings_set(struct phy_device *phydev, 1551 const struct ethtool_link_ksettings *cmd); 1552 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); 1553 int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); 1554 int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd); 1555 int phy_disable_interrupts(struct phy_device *phydev); 1556 void phy_request_interrupt(struct phy_device *phydev); 1557 void phy_free_interrupt(struct phy_device *phydev); 1558 void phy_print_status(struct phy_device *phydev); 1559 int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); 1560 void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); 1561 void phy_advertise_supported(struct phy_device *phydev); 1562 void phy_support_sym_pause(struct phy_device *phydev); 1563 void phy_support_asym_pause(struct phy_device *phydev); 1564 void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, 1565 bool autoneg); 1566 void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx); 1567 bool phy_validate_pause(struct phy_device *phydev, 1568 struct ethtool_pauseparam *pp); 1569 void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause); 1570 1571 s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev, 1572 const int *delay_values, int size, bool is_rx); 1573 1574 void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, 1575 bool *tx_pause, bool *rx_pause); 1576 1577 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, 1578 int (*run)(struct phy_device *)); 1579 int phy_register_fixup_for_id(const char *bus_id, 1580 int (*run)(struct phy_device *)); 1581 int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, 1582 int (*run)(struct phy_device *)); 1583 1584 int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); 1585 int phy_unregister_fixup_for_id(const char *bus_id); 1586 int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); 1587 1588 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); 1589 int phy_get_eee_err(struct phy_device *phydev); 1590 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); 1591 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); 1592 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); 1593 void phy_ethtool_get_wol(struct phy_device *phydev, 1594 struct ethtool_wolinfo *wol); 1595 int phy_ethtool_get_link_ksettings(struct net_device *ndev, 1596 struct ethtool_link_ksettings *cmd); 1597 int phy_ethtool_set_link_ksettings(struct net_device *ndev, 1598 const struct ethtool_link_ksettings *cmd); 1599 int phy_ethtool_nway_reset(struct net_device *ndev); 1600 int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size); 1601 void phy_package_leave(struct phy_device *phydev); 1602 int devm_phy_package_join(struct device *dev, struct phy_device *phydev, 1603 int addr, size_t priv_size); 1604 1605 #if IS_ENABLED(CONFIG_PHYLIB) 1606 int __init mdio_bus_init(void); 1607 void mdio_bus_exit(void); 1608 #endif 1609 1610 int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); 1611 int phy_ethtool_get_sset_count(struct phy_device *phydev); 1612 int phy_ethtool_get_stats(struct phy_device *phydev, 1613 struct ethtool_stats *stats, u64 *data); 1614 1615 static inline int phy_package_read(struct phy_device *phydev, u32 regnum) 1616 { 1617 struct phy_package_shared *shared = phydev->shared; 1618 1619 if (!shared) 1620 return -EIO; 1621 1622 return mdiobus_read(phydev->mdio.bus, shared->addr, regnum); 1623 } 1624 1625 static inline int __phy_package_read(struct phy_device *phydev, u32 regnum) 1626 { 1627 struct phy_package_shared *shared = phydev->shared; 1628 1629 if (!shared) 1630 return -EIO; 1631 1632 return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); 1633 } 1634 1635 static inline int phy_package_write(struct phy_device *phydev, 1636 u32 regnum, u16 val) 1637 { 1638 struct phy_package_shared *shared = phydev->shared; 1639 1640 if (!shared) 1641 return -EIO; 1642 1643 return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); 1644 } 1645 1646 static inline int __phy_package_write(struct phy_device *phydev, 1647 u32 regnum, u16 val) 1648 { 1649 struct phy_package_shared *shared = phydev->shared; 1650 1651 if (!shared) 1652 return -EIO; 1653 1654 return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); 1655 } 1656 1657 static inline bool __phy_package_set_once(struct phy_device *phydev, 1658 unsigned int b) 1659 { 1660 struct phy_package_shared *shared = phydev->shared; 1661 1662 if (!shared) 1663 return false; 1664 1665 return !test_and_set_bit(b, &shared->flags); 1666 } 1667 1668 static inline bool phy_package_init_once(struct phy_device *phydev) 1669 { 1670 return __phy_package_set_once(phydev, PHY_SHARED_F_INIT_DONE); 1671 } 1672 1673 static inline bool phy_package_probe_once(struct phy_device *phydev) 1674 { 1675 return __phy_package_set_once(phydev, PHY_SHARED_F_PROBE_DONE); 1676 } 1677 1678 extern struct bus_type mdio_bus_type; 1679 1680 struct mdio_board_info { 1681 const char *bus_id; 1682 char modalias[MDIO_NAME_SIZE]; 1683 int mdio_addr; 1684 const void *platform_data; 1685 }; 1686 1687 #if IS_ENABLED(CONFIG_MDIO_DEVICE) 1688 int mdiobus_register_board_info(const struct mdio_board_info *info, 1689 unsigned int n); 1690 #else 1691 static inline int mdiobus_register_board_info(const struct mdio_board_info *i, 1692 unsigned int n) 1693 { 1694 return 0; 1695 } 1696 #endif 1697 1698 1699 /** 1700 * phy_module_driver() - Helper macro for registering PHY drivers 1701 * @__phy_drivers: array of PHY drivers to register 1702 * @__count: Numbers of members in array 1703 * 1704 * Helper macro for PHY drivers which do not do anything special in module 1705 * init/exit. Each module may only use this macro once, and calling it 1706 * replaces module_init() and module_exit(). 1707 */ 1708 #define phy_module_driver(__phy_drivers, __count) \ 1709 static int __init phy_module_init(void) \ 1710 { \ 1711 return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ 1712 } \ 1713 module_init(phy_module_init); \ 1714 static void __exit phy_module_exit(void) \ 1715 { \ 1716 phy_drivers_unregister(__phy_drivers, __count); \ 1717 } \ 1718 module_exit(phy_module_exit) 1719 1720 #define module_phy_driver(__phy_drivers) \ 1721 phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) 1722 1723 bool phy_driver_is_genphy(struct phy_device *phydev); 1724 bool phy_driver_is_genphy_10g(struct phy_device *phydev); 1725 1726 #endif /* __PHY_H */ 1727