1 /* 2 * linux/fs/exec.c 3 * 4 * Copyright (C) 1991, 1992 Linus Torvalds 5 */ 6 7 /* 8 * #!-checking implemented by tytso. 9 */ 10 /* 11 * Demand-loading implemented 01.12.91 - no need to read anything but 12 * the header into memory. The inode of the executable is put into 13 * "current->executable", and page faults do the actual loading. Clean. 14 * 15 * Once more I can proudly say that linux stood up to being changed: it 16 * was less than 2 hours work to get demand-loading completely implemented. 17 * 18 * Demand loading changed July 1993 by Eric Youngdale. Use mmap instead, 19 * current->executable is only used by the procfs. This allows a dispatch 20 * table to check for several different types of binary formats. We keep 21 * trying until we recognize the file or we run out of supported binary 22 * formats. 23 */ 24 25 #include <linux/slab.h> 26 #include <linux/file.h> 27 #include <linux/fdtable.h> 28 #include <linux/mm.h> 29 #include <linux/stat.h> 30 #include <linux/fcntl.h> 31 #include <linux/swap.h> 32 #include <linux/string.h> 33 #include <linux/init.h> 34 #include <linux/pagemap.h> 35 #include <linux/perf_event.h> 36 #include <linux/highmem.h> 37 #include <linux/spinlock.h> 38 #include <linux/key.h> 39 #include <linux/personality.h> 40 #include <linux/binfmts.h> 41 #include <linux/utsname.h> 42 #include <linux/pid_namespace.h> 43 #include <linux/module.h> 44 #include <linux/namei.h> 45 #include <linux/mount.h> 46 #include <linux/security.h> 47 #include <linux/syscalls.h> 48 #include <linux/tsacct_kern.h> 49 #include <linux/cn_proc.h> 50 #include <linux/audit.h> 51 #include <linux/tracehook.h> 52 #include <linux/kmod.h> 53 #include <linux/fsnotify.h> 54 #include <linux/fs_struct.h> 55 #include <linux/pipe_fs_i.h> 56 #include <linux/oom.h> 57 #include <linux/compat.h> 58 59 #include <asm/uaccess.h> 60 #include <asm/mmu_context.h> 61 #include <asm/tlb.h> 62 #include <asm/exec.h> 63 64 #include <trace/events/task.h> 65 #include "internal.h" 66 67 #include <trace/events/sched.h> 68 69 int core_uses_pid; 70 char core_pattern[CORENAME_MAX_SIZE] = "core"; 71 unsigned int core_pipe_limit; 72 int suid_dumpable = 0; 73 74 struct core_name { 75 char *corename; 76 int used, size; 77 }; 78 static atomic_t call_count = ATOMIC_INIT(1); 79 80 /* The maximal length of core_pattern is also specified in sysctl.c */ 81 82 static LIST_HEAD(formats); 83 static DEFINE_RWLOCK(binfmt_lock); 84 85 void __register_binfmt(struct linux_binfmt * fmt, int insert) 86 { 87 BUG_ON(!fmt); 88 write_lock(&binfmt_lock); 89 insert ? list_add(&fmt->lh, &formats) : 90 list_add_tail(&fmt->lh, &formats); 91 write_unlock(&binfmt_lock); 92 } 93 94 EXPORT_SYMBOL(__register_binfmt); 95 96 void unregister_binfmt(struct linux_binfmt * fmt) 97 { 98 write_lock(&binfmt_lock); 99 list_del(&fmt->lh); 100 write_unlock(&binfmt_lock); 101 } 102 103 EXPORT_SYMBOL(unregister_binfmt); 104 105 static inline void put_binfmt(struct linux_binfmt * fmt) 106 { 107 module_put(fmt->module); 108 } 109 110 /* 111 * Note that a shared library must be both readable and executable due to 112 * security reasons. 113 * 114 * Also note that we take the address to load from from the file itself. 115 */ 116 SYSCALL_DEFINE1(uselib, const char __user *, library) 117 { 118 struct file *file; 119 char *tmp = getname(library); 120 int error = PTR_ERR(tmp); 121 static const struct open_flags uselib_flags = { 122 .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, 123 .acc_mode = MAY_READ | MAY_EXEC | MAY_OPEN, 124 .intent = LOOKUP_OPEN 125 }; 126 127 if (IS_ERR(tmp)) 128 goto out; 129 130 file = do_filp_open(AT_FDCWD, tmp, &uselib_flags, LOOKUP_FOLLOW); 131 putname(tmp); 132 error = PTR_ERR(file); 133 if (IS_ERR(file)) 134 goto out; 135 136 error = -EINVAL; 137 if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) 138 goto exit; 139 140 error = -EACCES; 141 if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) 142 goto exit; 143 144 fsnotify_open(file); 145 146 error = -ENOEXEC; 147 if(file->f_op) { 148 struct linux_binfmt * fmt; 149 150 read_lock(&binfmt_lock); 151 list_for_each_entry(fmt, &formats, lh) { 152 if (!fmt->load_shlib) 153 continue; 154 if (!try_module_get(fmt->module)) 155 continue; 156 read_unlock(&binfmt_lock); 157 error = fmt->load_shlib(file); 158 read_lock(&binfmt_lock); 159 put_binfmt(fmt); 160 if (error != -ENOEXEC) 161 break; 162 } 163 read_unlock(&binfmt_lock); 164 } 165 exit: 166 fput(file); 167 out: 168 return error; 169 } 170 171 #ifdef CONFIG_MMU 172 /* 173 * The nascent bprm->mm is not visible until exec_mmap() but it can 174 * use a lot of memory, account these pages in current->mm temporary 175 * for oom_badness()->get_mm_rss(). Once exec succeeds or fails, we 176 * change the counter back via acct_arg_size(0). 177 */ 178 static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) 179 { 180 struct mm_struct *mm = current->mm; 181 long diff = (long)(pages - bprm->vma_pages); 182 183 if (!mm || !diff) 184 return; 185 186 bprm->vma_pages = pages; 187 add_mm_counter(mm, MM_ANONPAGES, diff); 188 } 189 190 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, 191 int write) 192 { 193 struct page *page; 194 int ret; 195 196 #ifdef CONFIG_STACK_GROWSUP 197 if (write) { 198 ret = expand_downwards(bprm->vma, pos); 199 if (ret < 0) 200 return NULL; 201 } 202 #endif 203 ret = get_user_pages(current, bprm->mm, pos, 204 1, write, 1, &page, NULL); 205 if (ret <= 0) 206 return NULL; 207 208 if (write) { 209 unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; 210 struct rlimit *rlim; 211 212 acct_arg_size(bprm, size / PAGE_SIZE); 213 214 /* 215 * We've historically supported up to 32 pages (ARG_MAX) 216 * of argument strings even with small stacks 217 */ 218 if (size <= ARG_MAX) 219 return page; 220 221 /* 222 * Limit to 1/4-th the stack size for the argv+env strings. 223 * This ensures that: 224 * - the remaining binfmt code will not run out of stack space, 225 * - the program will have a reasonable amount of stack left 226 * to work from. 227 */ 228 rlim = current->signal->rlim; 229 if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) { 230 put_page(page); 231 return NULL; 232 } 233 } 234 235 return page; 236 } 237 238 static void put_arg_page(struct page *page) 239 { 240 put_page(page); 241 } 242 243 static void free_arg_page(struct linux_binprm *bprm, int i) 244 { 245 } 246 247 static void free_arg_pages(struct linux_binprm *bprm) 248 { 249 } 250 251 static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, 252 struct page *page) 253 { 254 flush_cache_page(bprm->vma, pos, page_to_pfn(page)); 255 } 256 257 static int __bprm_mm_init(struct linux_binprm *bprm) 258 { 259 int err; 260 struct vm_area_struct *vma = NULL; 261 struct mm_struct *mm = bprm->mm; 262 263 bprm->vma = vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); 264 if (!vma) 265 return -ENOMEM; 266 267 down_write(&mm->mmap_sem); 268 vma->vm_mm = mm; 269 270 /* 271 * Place the stack at the largest stack address the architecture 272 * supports. Later, we'll move this to an appropriate place. We don't 273 * use STACK_TOP because that can depend on attributes which aren't 274 * configured yet. 275 */ 276 BUILD_BUG_ON(VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP); 277 vma->vm_end = STACK_TOP_MAX; 278 vma->vm_start = vma->vm_end - PAGE_SIZE; 279 vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP; 280 vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); 281 INIT_LIST_HEAD(&vma->anon_vma_chain); 282 283 err = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1); 284 if (err) 285 goto err; 286 287 err = insert_vm_struct(mm, vma); 288 if (err) 289 goto err; 290 291 mm->stack_vm = mm->total_vm = 1; 292 up_write(&mm->mmap_sem); 293 bprm->p = vma->vm_end - sizeof(void *); 294 return 0; 295 err: 296 up_write(&mm->mmap_sem); 297 bprm->vma = NULL; 298 kmem_cache_free(vm_area_cachep, vma); 299 return err; 300 } 301 302 static bool valid_arg_len(struct linux_binprm *bprm, long len) 303 { 304 return len <= MAX_ARG_STRLEN; 305 } 306 307 #else 308 309 static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) 310 { 311 } 312 313 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, 314 int write) 315 { 316 struct page *page; 317 318 page = bprm->page[pos / PAGE_SIZE]; 319 if (!page && write) { 320 page = alloc_page(GFP_HIGHUSER|__GFP_ZERO); 321 if (!page) 322 return NULL; 323 bprm->page[pos / PAGE_SIZE] = page; 324 } 325 326 return page; 327 } 328 329 static void put_arg_page(struct page *page) 330 { 331 } 332 333 static void free_arg_page(struct linux_binprm *bprm, int i) 334 { 335 if (bprm->page[i]) { 336 __free_page(bprm->page[i]); 337 bprm->page[i] = NULL; 338 } 339 } 340 341 static void free_arg_pages(struct linux_binprm *bprm) 342 { 343 int i; 344 345 for (i = 0; i < MAX_ARG_PAGES; i++) 346 free_arg_page(bprm, i); 347 } 348 349 static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, 350 struct page *page) 351 { 352 } 353 354 static int __bprm_mm_init(struct linux_binprm *bprm) 355 { 356 bprm->p = PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *); 357 return 0; 358 } 359 360 static bool valid_arg_len(struct linux_binprm *bprm, long len) 361 { 362 return len <= bprm->p; 363 } 364 365 #endif /* CONFIG_MMU */ 366 367 /* 368 * Create a new mm_struct and populate it with a temporary stack 369 * vm_area_struct. We don't have enough context at this point to set the stack 370 * flags, permissions, and offset, so we use temporary values. We'll update 371 * them later in setup_arg_pages(). 372 */ 373 int bprm_mm_init(struct linux_binprm *bprm) 374 { 375 int err; 376 struct mm_struct *mm = NULL; 377 378 bprm->mm = mm = mm_alloc(); 379 err = -ENOMEM; 380 if (!mm) 381 goto err; 382 383 err = init_new_context(current, mm); 384 if (err) 385 goto err; 386 387 err = __bprm_mm_init(bprm); 388 if (err) 389 goto err; 390 391 return 0; 392 393 err: 394 if (mm) { 395 bprm->mm = NULL; 396 mmdrop(mm); 397 } 398 399 return err; 400 } 401 402 struct user_arg_ptr { 403 #ifdef CONFIG_COMPAT 404 bool is_compat; 405 #endif 406 union { 407 const char __user *const __user *native; 408 #ifdef CONFIG_COMPAT 409 compat_uptr_t __user *compat; 410 #endif 411 } ptr; 412 }; 413 414 static const char __user *get_user_arg_ptr(struct user_arg_ptr argv, int nr) 415 { 416 const char __user *native; 417 418 #ifdef CONFIG_COMPAT 419 if (unlikely(argv.is_compat)) { 420 compat_uptr_t compat; 421 422 if (get_user(compat, argv.ptr.compat + nr)) 423 return ERR_PTR(-EFAULT); 424 425 return compat_ptr(compat); 426 } 427 #endif 428 429 if (get_user(native, argv.ptr.native + nr)) 430 return ERR_PTR(-EFAULT); 431 432 return native; 433 } 434 435 /* 436 * count() counts the number of strings in array ARGV. 437 */ 438 static int count(struct user_arg_ptr argv, int max) 439 { 440 int i = 0; 441 442 if (argv.ptr.native != NULL) { 443 for (;;) { 444 const char __user *p = get_user_arg_ptr(argv, i); 445 446 if (!p) 447 break; 448 449 if (IS_ERR(p)) 450 return -EFAULT; 451 452 if (i++ >= max) 453 return -E2BIG; 454 455 if (fatal_signal_pending(current)) 456 return -ERESTARTNOHAND; 457 cond_resched(); 458 } 459 } 460 return i; 461 } 462 463 /* 464 * 'copy_strings()' copies argument/environment strings from the old 465 * processes's memory to the new process's stack. The call to get_user_pages() 466 * ensures the destination page is created and not swapped out. 467 */ 468 static int copy_strings(int argc, struct user_arg_ptr argv, 469 struct linux_binprm *bprm) 470 { 471 struct page *kmapped_page = NULL; 472 char *kaddr = NULL; 473 unsigned long kpos = 0; 474 int ret; 475 476 while (argc-- > 0) { 477 const char __user *str; 478 int len; 479 unsigned long pos; 480 481 ret = -EFAULT; 482 str = get_user_arg_ptr(argv, argc); 483 if (IS_ERR(str)) 484 goto out; 485 486 len = strnlen_user(str, MAX_ARG_STRLEN); 487 if (!len) 488 goto out; 489 490 ret = -E2BIG; 491 if (!valid_arg_len(bprm, len)) 492 goto out; 493 494 /* We're going to work our way backwords. */ 495 pos = bprm->p; 496 str += len; 497 bprm->p -= len; 498 499 while (len > 0) { 500 int offset, bytes_to_copy; 501 502 if (fatal_signal_pending(current)) { 503 ret = -ERESTARTNOHAND; 504 goto out; 505 } 506 cond_resched(); 507 508 offset = pos % PAGE_SIZE; 509 if (offset == 0) 510 offset = PAGE_SIZE; 511 512 bytes_to_copy = offset; 513 if (bytes_to_copy > len) 514 bytes_to_copy = len; 515 516 offset -= bytes_to_copy; 517 pos -= bytes_to_copy; 518 str -= bytes_to_copy; 519 len -= bytes_to_copy; 520 521 if (!kmapped_page || kpos != (pos & PAGE_MASK)) { 522 struct page *page; 523 524 page = get_arg_page(bprm, pos, 1); 525 if (!page) { 526 ret = -E2BIG; 527 goto out; 528 } 529 530 if (kmapped_page) { 531 flush_kernel_dcache_page(kmapped_page); 532 kunmap(kmapped_page); 533 put_arg_page(kmapped_page); 534 } 535 kmapped_page = page; 536 kaddr = kmap(kmapped_page); 537 kpos = pos & PAGE_MASK; 538 flush_arg_page(bprm, kpos, kmapped_page); 539 } 540 if (copy_from_user(kaddr+offset, str, bytes_to_copy)) { 541 ret = -EFAULT; 542 goto out; 543 } 544 } 545 } 546 ret = 0; 547 out: 548 if (kmapped_page) { 549 flush_kernel_dcache_page(kmapped_page); 550 kunmap(kmapped_page); 551 put_arg_page(kmapped_page); 552 } 553 return ret; 554 } 555 556 /* 557 * Like copy_strings, but get argv and its values from kernel memory. 558 */ 559 int copy_strings_kernel(int argc, const char *const *__argv, 560 struct linux_binprm *bprm) 561 { 562 int r; 563 mm_segment_t oldfs = get_fs(); 564 struct user_arg_ptr argv = { 565 .ptr.native = (const char __user *const __user *)__argv, 566 }; 567 568 set_fs(KERNEL_DS); 569 r = copy_strings(argc, argv, bprm); 570 set_fs(oldfs); 571 572 return r; 573 } 574 EXPORT_SYMBOL(copy_strings_kernel); 575 576 #ifdef CONFIG_MMU 577 578 /* 579 * During bprm_mm_init(), we create a temporary stack at STACK_TOP_MAX. Once 580 * the binfmt code determines where the new stack should reside, we shift it to 581 * its final location. The process proceeds as follows: 582 * 583 * 1) Use shift to calculate the new vma endpoints. 584 * 2) Extend vma to cover both the old and new ranges. This ensures the 585 * arguments passed to subsequent functions are consistent. 586 * 3) Move vma's page tables to the new range. 587 * 4) Free up any cleared pgd range. 588 * 5) Shrink the vma to cover only the new range. 589 */ 590 static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) 591 { 592 struct mm_struct *mm = vma->vm_mm; 593 unsigned long old_start = vma->vm_start; 594 unsigned long old_end = vma->vm_end; 595 unsigned long length = old_end - old_start; 596 unsigned long new_start = old_start - shift; 597 unsigned long new_end = old_end - shift; 598 struct mmu_gather tlb; 599 600 BUG_ON(new_start > new_end); 601 602 /* 603 * ensure there are no vmas between where we want to go 604 * and where we are 605 */ 606 if (vma != find_vma(mm, new_start)) 607 return -EFAULT; 608 609 /* 610 * cover the whole range: [new_start, old_end) 611 */ 612 if (vma_adjust(vma, new_start, old_end, vma->vm_pgoff, NULL)) 613 return -ENOMEM; 614 615 /* 616 * move the page tables downwards, on failure we rely on 617 * process cleanup to remove whatever mess we made. 618 */ 619 if (length != move_page_tables(vma, old_start, 620 vma, new_start, length)) 621 return -ENOMEM; 622 623 lru_add_drain(); 624 tlb_gather_mmu(&tlb, mm, 0); 625 if (new_end > old_start) { 626 /* 627 * when the old and new regions overlap clear from new_end. 628 */ 629 free_pgd_range(&tlb, new_end, old_end, new_end, 630 vma->vm_next ? vma->vm_next->vm_start : 0); 631 } else { 632 /* 633 * otherwise, clean from old_start; this is done to not touch 634 * the address space in [new_end, old_start) some architectures 635 * have constraints on va-space that make this illegal (IA64) - 636 * for the others its just a little faster. 637 */ 638 free_pgd_range(&tlb, old_start, old_end, new_end, 639 vma->vm_next ? vma->vm_next->vm_start : 0); 640 } 641 tlb_finish_mmu(&tlb, new_end, old_end); 642 643 /* 644 * Shrink the vma to just the new range. Always succeeds. 645 */ 646 vma_adjust(vma, new_start, new_end, vma->vm_pgoff, NULL); 647 648 return 0; 649 } 650 651 /* 652 * Finalizes the stack vm_area_struct. The flags and permissions are updated, 653 * the stack is optionally relocated, and some extra space is added. 654 */ 655 int setup_arg_pages(struct linux_binprm *bprm, 656 unsigned long stack_top, 657 int executable_stack) 658 { 659 unsigned long ret; 660 unsigned long stack_shift; 661 struct mm_struct *mm = current->mm; 662 struct vm_area_struct *vma = bprm->vma; 663 struct vm_area_struct *prev = NULL; 664 unsigned long vm_flags; 665 unsigned long stack_base; 666 unsigned long stack_size; 667 unsigned long stack_expand; 668 unsigned long rlim_stack; 669 670 #ifdef CONFIG_STACK_GROWSUP 671 /* Limit stack size to 1GB */ 672 stack_base = rlimit_max(RLIMIT_STACK); 673 if (stack_base > (1 << 30)) 674 stack_base = 1 << 30; 675 676 /* Make sure we didn't let the argument array grow too large. */ 677 if (vma->vm_end - vma->vm_start > stack_base) 678 return -ENOMEM; 679 680 stack_base = PAGE_ALIGN(stack_top - stack_base); 681 682 stack_shift = vma->vm_start - stack_base; 683 mm->arg_start = bprm->p - stack_shift; 684 bprm->p = vma->vm_end - stack_shift; 685 #else 686 stack_top = arch_align_stack(stack_top); 687 stack_top = PAGE_ALIGN(stack_top); 688 689 if (unlikely(stack_top < mmap_min_addr) || 690 unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr)) 691 return -ENOMEM; 692 693 stack_shift = vma->vm_end - stack_top; 694 695 bprm->p -= stack_shift; 696 mm->arg_start = bprm->p; 697 #endif 698 699 if (bprm->loader) 700 bprm->loader -= stack_shift; 701 bprm->exec -= stack_shift; 702 703 down_write(&mm->mmap_sem); 704 vm_flags = VM_STACK_FLAGS; 705 706 /* 707 * Adjust stack execute permissions; explicitly enable for 708 * EXSTACK_ENABLE_X, disable for EXSTACK_DISABLE_X and leave alone 709 * (arch default) otherwise. 710 */ 711 if (unlikely(executable_stack == EXSTACK_ENABLE_X)) 712 vm_flags |= VM_EXEC; 713 else if (executable_stack == EXSTACK_DISABLE_X) 714 vm_flags &= ~VM_EXEC; 715 vm_flags |= mm->def_flags; 716 vm_flags |= VM_STACK_INCOMPLETE_SETUP; 717 718 ret = mprotect_fixup(vma, &prev, vma->vm_start, vma->vm_end, 719 vm_flags); 720 if (ret) 721 goto out_unlock; 722 BUG_ON(prev != vma); 723 724 /* Move stack pages down in memory. */ 725 if (stack_shift) { 726 ret = shift_arg_pages(vma, stack_shift); 727 if (ret) 728 goto out_unlock; 729 } 730 731 /* mprotect_fixup is overkill to remove the temporary stack flags */ 732 vma->vm_flags &= ~VM_STACK_INCOMPLETE_SETUP; 733 734 stack_expand = 131072UL; /* randomly 32*4k (or 2*64k) pages */ 735 stack_size = vma->vm_end - vma->vm_start; 736 /* 737 * Align this down to a page boundary as expand_stack 738 * will align it up. 739 */ 740 rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; 741 #ifdef CONFIG_STACK_GROWSUP 742 if (stack_size + stack_expand > rlim_stack) 743 stack_base = vma->vm_start + rlim_stack; 744 else 745 stack_base = vma->vm_end + stack_expand; 746 #else 747 if (stack_size + stack_expand > rlim_stack) 748 stack_base = vma->vm_end - rlim_stack; 749 else 750 stack_base = vma->vm_start - stack_expand; 751 #endif 752 current->mm->start_stack = bprm->p; 753 ret = expand_stack(vma, stack_base); 754 if (ret) 755 ret = -EFAULT; 756 757 out_unlock: 758 up_write(&mm->mmap_sem); 759 return ret; 760 } 761 EXPORT_SYMBOL(setup_arg_pages); 762 763 #endif /* CONFIG_MMU */ 764 765 struct file *open_exec(const char *name) 766 { 767 struct file *file; 768 int err; 769 static const struct open_flags open_exec_flags = { 770 .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, 771 .acc_mode = MAY_EXEC | MAY_OPEN, 772 .intent = LOOKUP_OPEN 773 }; 774 775 file = do_filp_open(AT_FDCWD, name, &open_exec_flags, LOOKUP_FOLLOW); 776 if (IS_ERR(file)) 777 goto out; 778 779 err = -EACCES; 780 if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) 781 goto exit; 782 783 if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) 784 goto exit; 785 786 fsnotify_open(file); 787 788 err = deny_write_access(file); 789 if (err) 790 goto exit; 791 792 out: 793 return file; 794 795 exit: 796 fput(file); 797 return ERR_PTR(err); 798 } 799 EXPORT_SYMBOL(open_exec); 800 801 int kernel_read(struct file *file, loff_t offset, 802 char *addr, unsigned long count) 803 { 804 mm_segment_t old_fs; 805 loff_t pos = offset; 806 int result; 807 808 old_fs = get_fs(); 809 set_fs(get_ds()); 810 /* The cast to a user pointer is valid due to the set_fs() */ 811 result = vfs_read(file, (void __user *)addr, count, &pos); 812 set_fs(old_fs); 813 return result; 814 } 815 816 EXPORT_SYMBOL(kernel_read); 817 818 static int exec_mmap(struct mm_struct *mm) 819 { 820 struct task_struct *tsk; 821 struct mm_struct * old_mm, *active_mm; 822 823 /* Notify parent that we're no longer interested in the old VM */ 824 tsk = current; 825 old_mm = current->mm; 826 sync_mm_rss(old_mm); 827 mm_release(tsk, old_mm); 828 829 if (old_mm) { 830 /* 831 * Make sure that if there is a core dump in progress 832 * for the old mm, we get out and die instead of going 833 * through with the exec. We must hold mmap_sem around 834 * checking core_state and changing tsk->mm. 835 */ 836 down_read(&old_mm->mmap_sem); 837 if (unlikely(old_mm->core_state)) { 838 up_read(&old_mm->mmap_sem); 839 return -EINTR; 840 } 841 } 842 task_lock(tsk); 843 active_mm = tsk->active_mm; 844 tsk->mm = mm; 845 tsk->active_mm = mm; 846 activate_mm(active_mm, mm); 847 task_unlock(tsk); 848 arch_pick_mmap_layout(mm); 849 if (old_mm) { 850 up_read(&old_mm->mmap_sem); 851 BUG_ON(active_mm != old_mm); 852 setmax_mm_hiwater_rss(&tsk->signal->maxrss, old_mm); 853 mm_update_next_owner(old_mm); 854 mmput(old_mm); 855 return 0; 856 } 857 mmdrop(active_mm); 858 return 0; 859 } 860 861 /* 862 * This function makes sure the current process has its own signal table, 863 * so that flush_signal_handlers can later reset the handlers without 864 * disturbing other processes. (Other processes might share the signal 865 * table via the CLONE_SIGHAND option to clone().) 866 */ 867 static int de_thread(struct task_struct *tsk) 868 { 869 struct signal_struct *sig = tsk->signal; 870 struct sighand_struct *oldsighand = tsk->sighand; 871 spinlock_t *lock = &oldsighand->siglock; 872 873 if (thread_group_empty(tsk)) 874 goto no_thread_group; 875 876 /* 877 * Kill all other threads in the thread group. 878 */ 879 spin_lock_irq(lock); 880 if (signal_group_exit(sig)) { 881 /* 882 * Another group action in progress, just 883 * return so that the signal is processed. 884 */ 885 spin_unlock_irq(lock); 886 return -EAGAIN; 887 } 888 889 sig->group_exit_task = tsk; 890 sig->notify_count = zap_other_threads(tsk); 891 if (!thread_group_leader(tsk)) 892 sig->notify_count--; 893 894 while (sig->notify_count) { 895 __set_current_state(TASK_UNINTERRUPTIBLE); 896 spin_unlock_irq(lock); 897 schedule(); 898 spin_lock_irq(lock); 899 } 900 spin_unlock_irq(lock); 901 902 /* 903 * At this point all other threads have exited, all we have to 904 * do is to wait for the thread group leader to become inactive, 905 * and to assume its PID: 906 */ 907 if (!thread_group_leader(tsk)) { 908 struct task_struct *leader = tsk->group_leader; 909 910 sig->notify_count = -1; /* for exit_notify() */ 911 for (;;) { 912 write_lock_irq(&tasklist_lock); 913 if (likely(leader->exit_state)) 914 break; 915 __set_current_state(TASK_UNINTERRUPTIBLE); 916 write_unlock_irq(&tasklist_lock); 917 schedule(); 918 } 919 920 /* 921 * The only record we have of the real-time age of a 922 * process, regardless of execs it's done, is start_time. 923 * All the past CPU time is accumulated in signal_struct 924 * from sister threads now dead. But in this non-leader 925 * exec, nothing survives from the original leader thread, 926 * whose birth marks the true age of this process now. 927 * When we take on its identity by switching to its PID, we 928 * also take its birthdate (always earlier than our own). 929 */ 930 tsk->start_time = leader->start_time; 931 932 BUG_ON(!same_thread_group(leader, tsk)); 933 BUG_ON(has_group_leader_pid(tsk)); 934 /* 935 * An exec() starts a new thread group with the 936 * TGID of the previous thread group. Rehash the 937 * two threads with a switched PID, and release 938 * the former thread group leader: 939 */ 940 941 /* Become a process group leader with the old leader's pid. 942 * The old leader becomes a thread of the this thread group. 943 * Note: The old leader also uses this pid until release_task 944 * is called. Odd but simple and correct. 945 */ 946 detach_pid(tsk, PIDTYPE_PID); 947 tsk->pid = leader->pid; 948 attach_pid(tsk, PIDTYPE_PID, task_pid(leader)); 949 transfer_pid(leader, tsk, PIDTYPE_PGID); 950 transfer_pid(leader, tsk, PIDTYPE_SID); 951 952 list_replace_rcu(&leader->tasks, &tsk->tasks); 953 list_replace_init(&leader->sibling, &tsk->sibling); 954 955 tsk->group_leader = tsk; 956 leader->group_leader = tsk; 957 958 tsk->exit_signal = SIGCHLD; 959 leader->exit_signal = -1; 960 961 BUG_ON(leader->exit_state != EXIT_ZOMBIE); 962 leader->exit_state = EXIT_DEAD; 963 964 /* 965 * We are going to release_task()->ptrace_unlink() silently, 966 * the tracer can sleep in do_wait(). EXIT_DEAD guarantees 967 * the tracer wont't block again waiting for this thread. 968 */ 969 if (unlikely(leader->ptrace)) 970 __wake_up_parent(leader, leader->parent); 971 write_unlock_irq(&tasklist_lock); 972 973 release_task(leader); 974 } 975 976 sig->group_exit_task = NULL; 977 sig->notify_count = 0; 978 979 no_thread_group: 980 /* we have changed execution domain */ 981 tsk->exit_signal = SIGCHLD; 982 983 exit_itimers(sig); 984 flush_itimer_signals(); 985 986 if (atomic_read(&oldsighand->count) != 1) { 987 struct sighand_struct *newsighand; 988 /* 989 * This ->sighand is shared with the CLONE_SIGHAND 990 * but not CLONE_THREAD task, switch to the new one. 991 */ 992 newsighand = kmem_cache_alloc(sighand_cachep, GFP_KERNEL); 993 if (!newsighand) 994 return -ENOMEM; 995 996 atomic_set(&newsighand->count, 1); 997 memcpy(newsighand->action, oldsighand->action, 998 sizeof(newsighand->action)); 999 1000 write_lock_irq(&tasklist_lock); 1001 spin_lock(&oldsighand->siglock); 1002 rcu_assign_pointer(tsk->sighand, newsighand); 1003 spin_unlock(&oldsighand->siglock); 1004 write_unlock_irq(&tasklist_lock); 1005 1006 __cleanup_sighand(oldsighand); 1007 } 1008 1009 BUG_ON(!thread_group_leader(tsk)); 1010 return 0; 1011 } 1012 1013 /* 1014 * These functions flushes out all traces of the currently running executable 1015 * so that a new one can be started 1016 */ 1017 static void flush_old_files(struct files_struct * files) 1018 { 1019 long j = -1; 1020 struct fdtable *fdt; 1021 1022 spin_lock(&files->file_lock); 1023 for (;;) { 1024 unsigned long set, i; 1025 1026 j++; 1027 i = j * __NFDBITS; 1028 fdt = files_fdtable(files); 1029 if (i >= fdt->max_fds) 1030 break; 1031 set = fdt->close_on_exec[j]; 1032 if (!set) 1033 continue; 1034 fdt->close_on_exec[j] = 0; 1035 spin_unlock(&files->file_lock); 1036 for ( ; set ; i++,set >>= 1) { 1037 if (set & 1) { 1038 sys_close(i); 1039 } 1040 } 1041 spin_lock(&files->file_lock); 1042 1043 } 1044 spin_unlock(&files->file_lock); 1045 } 1046 1047 char *get_task_comm(char *buf, struct task_struct *tsk) 1048 { 1049 /* buf must be at least sizeof(tsk->comm) in size */ 1050 task_lock(tsk); 1051 strncpy(buf, tsk->comm, sizeof(tsk->comm)); 1052 task_unlock(tsk); 1053 return buf; 1054 } 1055 EXPORT_SYMBOL_GPL(get_task_comm); 1056 1057 void set_task_comm(struct task_struct *tsk, char *buf) 1058 { 1059 task_lock(tsk); 1060 1061 trace_task_rename(tsk, buf); 1062 1063 /* 1064 * Threads may access current->comm without holding 1065 * the task lock, so write the string carefully. 1066 * Readers without a lock may see incomplete new 1067 * names but are safe from non-terminating string reads. 1068 */ 1069 memset(tsk->comm, 0, TASK_COMM_LEN); 1070 wmb(); 1071 strlcpy(tsk->comm, buf, sizeof(tsk->comm)); 1072 task_unlock(tsk); 1073 perf_event_comm(tsk); 1074 } 1075 1076 static void filename_to_taskname(char *tcomm, const char *fn, unsigned int len) 1077 { 1078 int i, ch; 1079 1080 /* Copies the binary name from after last slash */ 1081 for (i = 0; (ch = *(fn++)) != '\0';) { 1082 if (ch == '/') 1083 i = 0; /* overwrite what we wrote */ 1084 else 1085 if (i < len - 1) 1086 tcomm[i++] = ch; 1087 } 1088 tcomm[i] = '\0'; 1089 } 1090 1091 int flush_old_exec(struct linux_binprm * bprm) 1092 { 1093 int retval; 1094 1095 /* 1096 * Make sure we have a private signal table and that 1097 * we are unassociated from the previous thread group. 1098 */ 1099 retval = de_thread(current); 1100 if (retval) 1101 goto out; 1102 1103 set_mm_exe_file(bprm->mm, bprm->file); 1104 1105 filename_to_taskname(bprm->tcomm, bprm->filename, sizeof(bprm->tcomm)); 1106 /* 1107 * Release all of the old mmap stuff 1108 */ 1109 acct_arg_size(bprm, 0); 1110 retval = exec_mmap(bprm->mm); 1111 if (retval) 1112 goto out; 1113 1114 bprm->mm = NULL; /* We're using it now */ 1115 1116 set_fs(USER_DS); 1117 current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD); 1118 flush_thread(); 1119 current->personality &= ~bprm->per_clear; 1120 1121 return 0; 1122 1123 out: 1124 return retval; 1125 } 1126 EXPORT_SYMBOL(flush_old_exec); 1127 1128 void would_dump(struct linux_binprm *bprm, struct file *file) 1129 { 1130 if (inode_permission(file->f_path.dentry->d_inode, MAY_READ) < 0) 1131 bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP; 1132 } 1133 EXPORT_SYMBOL(would_dump); 1134 1135 void setup_new_exec(struct linux_binprm * bprm) 1136 { 1137 arch_pick_mmap_layout(current->mm); 1138 1139 /* This is the point of no return */ 1140 current->sas_ss_sp = current->sas_ss_size = 0; 1141 1142 if (current_euid() == current_uid() && current_egid() == current_gid()) 1143 set_dumpable(current->mm, 1); 1144 else 1145 set_dumpable(current->mm, suid_dumpable); 1146 1147 set_task_comm(current, bprm->tcomm); 1148 1149 /* Set the new mm task size. We have to do that late because it may 1150 * depend on TIF_32BIT which is only updated in flush_thread() on 1151 * some architectures like powerpc 1152 */ 1153 current->mm->task_size = TASK_SIZE; 1154 1155 /* install the new credentials */ 1156 if (bprm->cred->uid != current_euid() || 1157 bprm->cred->gid != current_egid()) { 1158 current->pdeath_signal = 0; 1159 } else { 1160 would_dump(bprm, bprm->file); 1161 if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP) 1162 set_dumpable(current->mm, suid_dumpable); 1163 } 1164 1165 /* 1166 * Flush performance counters when crossing a 1167 * security domain: 1168 */ 1169 if (!get_dumpable(current->mm)) 1170 perf_event_exit_task(current); 1171 1172 /* An exec changes our domain. We are no longer part of the thread 1173 group */ 1174 1175 current->self_exec_id++; 1176 1177 flush_signal_handlers(current, 0); 1178 flush_old_files(current->files); 1179 } 1180 EXPORT_SYMBOL(setup_new_exec); 1181 1182 /* 1183 * Prepare credentials and lock ->cred_guard_mutex. 1184 * install_exec_creds() commits the new creds and drops the lock. 1185 * Or, if exec fails before, free_bprm() should release ->cred and 1186 * and unlock. 1187 */ 1188 int prepare_bprm_creds(struct linux_binprm *bprm) 1189 { 1190 if (mutex_lock_interruptible(¤t->signal->cred_guard_mutex)) 1191 return -ERESTARTNOINTR; 1192 1193 bprm->cred = prepare_exec_creds(); 1194 if (likely(bprm->cred)) 1195 return 0; 1196 1197 mutex_unlock(¤t->signal->cred_guard_mutex); 1198 return -ENOMEM; 1199 } 1200 1201 void free_bprm(struct linux_binprm *bprm) 1202 { 1203 free_arg_pages(bprm); 1204 if (bprm->cred) { 1205 mutex_unlock(¤t->signal->cred_guard_mutex); 1206 abort_creds(bprm->cred); 1207 } 1208 kfree(bprm); 1209 } 1210 1211 /* 1212 * install the new credentials for this executable 1213 */ 1214 void install_exec_creds(struct linux_binprm *bprm) 1215 { 1216 security_bprm_committing_creds(bprm); 1217 1218 commit_creds(bprm->cred); 1219 bprm->cred = NULL; 1220 /* 1221 * cred_guard_mutex must be held at least to this point to prevent 1222 * ptrace_attach() from altering our determination of the task's 1223 * credentials; any time after this it may be unlocked. 1224 */ 1225 security_bprm_committed_creds(bprm); 1226 mutex_unlock(¤t->signal->cred_guard_mutex); 1227 } 1228 EXPORT_SYMBOL(install_exec_creds); 1229 1230 /* 1231 * determine how safe it is to execute the proposed program 1232 * - the caller must hold ->cred_guard_mutex to protect against 1233 * PTRACE_ATTACH 1234 */ 1235 static int check_unsafe_exec(struct linux_binprm *bprm) 1236 { 1237 struct task_struct *p = current, *t; 1238 unsigned n_fs; 1239 int res = 0; 1240 1241 if (p->ptrace) { 1242 if (p->ptrace & PT_PTRACE_CAP) 1243 bprm->unsafe |= LSM_UNSAFE_PTRACE_CAP; 1244 else 1245 bprm->unsafe |= LSM_UNSAFE_PTRACE; 1246 } 1247 1248 /* 1249 * This isn't strictly necessary, but it makes it harder for LSMs to 1250 * mess up. 1251 */ 1252 if (current->no_new_privs) 1253 bprm->unsafe |= LSM_UNSAFE_NO_NEW_PRIVS; 1254 1255 n_fs = 1; 1256 spin_lock(&p->fs->lock); 1257 rcu_read_lock(); 1258 for (t = next_thread(p); t != p; t = next_thread(t)) { 1259 if (t->fs == p->fs) 1260 n_fs++; 1261 } 1262 rcu_read_unlock(); 1263 1264 if (p->fs->users > n_fs) { 1265 bprm->unsafe |= LSM_UNSAFE_SHARE; 1266 } else { 1267 res = -EAGAIN; 1268 if (!p->fs->in_exec) { 1269 p->fs->in_exec = 1; 1270 res = 1; 1271 } 1272 } 1273 spin_unlock(&p->fs->lock); 1274 1275 return res; 1276 } 1277 1278 /* 1279 * Fill the binprm structure from the inode. 1280 * Check permissions, then read the first 128 (BINPRM_BUF_SIZE) bytes 1281 * 1282 * This may be called multiple times for binary chains (scripts for example). 1283 */ 1284 int prepare_binprm(struct linux_binprm *bprm) 1285 { 1286 umode_t mode; 1287 struct inode * inode = bprm->file->f_path.dentry->d_inode; 1288 int retval; 1289 1290 mode = inode->i_mode; 1291 if (bprm->file->f_op == NULL) 1292 return -EACCES; 1293 1294 /* clear any previous set[ug]id data from a previous binary */ 1295 bprm->cred->euid = current_euid(); 1296 bprm->cred->egid = current_egid(); 1297 1298 if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID) && 1299 !current->no_new_privs) { 1300 /* Set-uid? */ 1301 if (mode & S_ISUID) { 1302 bprm->per_clear |= PER_CLEAR_ON_SETID; 1303 bprm->cred->euid = inode->i_uid; 1304 } 1305 1306 /* Set-gid? */ 1307 /* 1308 * If setgid is set but no group execute bit then this 1309 * is a candidate for mandatory locking, not a setgid 1310 * executable. 1311 */ 1312 if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) { 1313 bprm->per_clear |= PER_CLEAR_ON_SETID; 1314 bprm->cred->egid = inode->i_gid; 1315 } 1316 } 1317 1318 /* fill in binprm security blob */ 1319 retval = security_bprm_set_creds(bprm); 1320 if (retval) 1321 return retval; 1322 bprm->cred_prepared = 1; 1323 1324 memset(bprm->buf, 0, BINPRM_BUF_SIZE); 1325 return kernel_read(bprm->file, 0, bprm->buf, BINPRM_BUF_SIZE); 1326 } 1327 1328 EXPORT_SYMBOL(prepare_binprm); 1329 1330 /* 1331 * Arguments are '\0' separated strings found at the location bprm->p 1332 * points to; chop off the first by relocating brpm->p to right after 1333 * the first '\0' encountered. 1334 */ 1335 int remove_arg_zero(struct linux_binprm *bprm) 1336 { 1337 int ret = 0; 1338 unsigned long offset; 1339 char *kaddr; 1340 struct page *page; 1341 1342 if (!bprm->argc) 1343 return 0; 1344 1345 do { 1346 offset = bprm->p & ~PAGE_MASK; 1347 page = get_arg_page(bprm, bprm->p, 0); 1348 if (!page) { 1349 ret = -EFAULT; 1350 goto out; 1351 } 1352 kaddr = kmap_atomic(page); 1353 1354 for (; offset < PAGE_SIZE && kaddr[offset]; 1355 offset++, bprm->p++) 1356 ; 1357 1358 kunmap_atomic(kaddr); 1359 put_arg_page(page); 1360 1361 if (offset == PAGE_SIZE) 1362 free_arg_page(bprm, (bprm->p >> PAGE_SHIFT) - 1); 1363 } while (offset == PAGE_SIZE); 1364 1365 bprm->p++; 1366 bprm->argc--; 1367 ret = 0; 1368 1369 out: 1370 return ret; 1371 } 1372 EXPORT_SYMBOL(remove_arg_zero); 1373 1374 /* 1375 * cycle the list of binary formats handler, until one recognizes the image 1376 */ 1377 int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) 1378 { 1379 unsigned int depth = bprm->recursion_depth; 1380 int try,retval; 1381 struct linux_binfmt *fmt; 1382 pid_t old_pid, old_vpid; 1383 1384 retval = security_bprm_check(bprm); 1385 if (retval) 1386 return retval; 1387 1388 retval = audit_bprm(bprm); 1389 if (retval) 1390 return retval; 1391 1392 /* Need to fetch pid before load_binary changes it */ 1393 old_pid = current->pid; 1394 rcu_read_lock(); 1395 old_vpid = task_pid_nr_ns(current, task_active_pid_ns(current->parent)); 1396 rcu_read_unlock(); 1397 1398 retval = -ENOENT; 1399 for (try=0; try<2; try++) { 1400 read_lock(&binfmt_lock); 1401 list_for_each_entry(fmt, &formats, lh) { 1402 int (*fn)(struct linux_binprm *, struct pt_regs *) = fmt->load_binary; 1403 if (!fn) 1404 continue; 1405 if (!try_module_get(fmt->module)) 1406 continue; 1407 read_unlock(&binfmt_lock); 1408 retval = fn(bprm, regs); 1409 /* 1410 * Restore the depth counter to its starting value 1411 * in this call, so we don't have to rely on every 1412 * load_binary function to restore it on return. 1413 */ 1414 bprm->recursion_depth = depth; 1415 if (retval >= 0) { 1416 if (depth == 0) { 1417 trace_sched_process_exec(current, old_pid, bprm); 1418 ptrace_event(PTRACE_EVENT_EXEC, old_vpid); 1419 } 1420 put_binfmt(fmt); 1421 allow_write_access(bprm->file); 1422 if (bprm->file) 1423 fput(bprm->file); 1424 bprm->file = NULL; 1425 current->did_exec = 1; 1426 proc_exec_connector(current); 1427 return retval; 1428 } 1429 read_lock(&binfmt_lock); 1430 put_binfmt(fmt); 1431 if (retval != -ENOEXEC || bprm->mm == NULL) 1432 break; 1433 if (!bprm->file) { 1434 read_unlock(&binfmt_lock); 1435 return retval; 1436 } 1437 } 1438 read_unlock(&binfmt_lock); 1439 #ifdef CONFIG_MODULES 1440 if (retval != -ENOEXEC || bprm->mm == NULL) { 1441 break; 1442 } else { 1443 #define printable(c) (((c)=='\t') || ((c)=='\n') || (0x20<=(c) && (c)<=0x7e)) 1444 if (printable(bprm->buf[0]) && 1445 printable(bprm->buf[1]) && 1446 printable(bprm->buf[2]) && 1447 printable(bprm->buf[3])) 1448 break; /* -ENOEXEC */ 1449 if (try) 1450 break; /* -ENOEXEC */ 1451 request_module("binfmt-%04x", *(unsigned short *)(&bprm->buf[2])); 1452 } 1453 #else 1454 break; 1455 #endif 1456 } 1457 return retval; 1458 } 1459 1460 EXPORT_SYMBOL(search_binary_handler); 1461 1462 /* 1463 * sys_execve() executes a new program. 1464 */ 1465 static int do_execve_common(const char *filename, 1466 struct user_arg_ptr argv, 1467 struct user_arg_ptr envp, 1468 struct pt_regs *regs) 1469 { 1470 struct linux_binprm *bprm; 1471 struct file *file; 1472 struct files_struct *displaced; 1473 bool clear_in_exec; 1474 int retval; 1475 const struct cred *cred = current_cred(); 1476 1477 /* 1478 * We move the actual failure in case of RLIMIT_NPROC excess from 1479 * set*uid() to execve() because too many poorly written programs 1480 * don't check setuid() return code. Here we additionally recheck 1481 * whether NPROC limit is still exceeded. 1482 */ 1483 if ((current->flags & PF_NPROC_EXCEEDED) && 1484 atomic_read(&cred->user->processes) > rlimit(RLIMIT_NPROC)) { 1485 retval = -EAGAIN; 1486 goto out_ret; 1487 } 1488 1489 /* We're below the limit (still or again), so we don't want to make 1490 * further execve() calls fail. */ 1491 current->flags &= ~PF_NPROC_EXCEEDED; 1492 1493 retval = unshare_files(&displaced); 1494 if (retval) 1495 goto out_ret; 1496 1497 retval = -ENOMEM; 1498 bprm = kzalloc(sizeof(*bprm), GFP_KERNEL); 1499 if (!bprm) 1500 goto out_files; 1501 1502 retval = prepare_bprm_creds(bprm); 1503 if (retval) 1504 goto out_free; 1505 1506 retval = check_unsafe_exec(bprm); 1507 if (retval < 0) 1508 goto out_free; 1509 clear_in_exec = retval; 1510 current->in_execve = 1; 1511 1512 file = open_exec(filename); 1513 retval = PTR_ERR(file); 1514 if (IS_ERR(file)) 1515 goto out_unmark; 1516 1517 sched_exec(); 1518 1519 bprm->file = file; 1520 bprm->filename = filename; 1521 bprm->interp = filename; 1522 1523 retval = bprm_mm_init(bprm); 1524 if (retval) 1525 goto out_file; 1526 1527 bprm->argc = count(argv, MAX_ARG_STRINGS); 1528 if ((retval = bprm->argc) < 0) 1529 goto out; 1530 1531 bprm->envc = count(envp, MAX_ARG_STRINGS); 1532 if ((retval = bprm->envc) < 0) 1533 goto out; 1534 1535 retval = prepare_binprm(bprm); 1536 if (retval < 0) 1537 goto out; 1538 1539 retval = copy_strings_kernel(1, &bprm->filename, bprm); 1540 if (retval < 0) 1541 goto out; 1542 1543 bprm->exec = bprm->p; 1544 retval = copy_strings(bprm->envc, envp, bprm); 1545 if (retval < 0) 1546 goto out; 1547 1548 retval = copy_strings(bprm->argc, argv, bprm); 1549 if (retval < 0) 1550 goto out; 1551 1552 retval = search_binary_handler(bprm,regs); 1553 if (retval < 0) 1554 goto out; 1555 1556 /* execve succeeded */ 1557 current->fs->in_exec = 0; 1558 current->in_execve = 0; 1559 acct_update_integrals(current); 1560 free_bprm(bprm); 1561 if (displaced) 1562 put_files_struct(displaced); 1563 return retval; 1564 1565 out: 1566 if (bprm->mm) { 1567 acct_arg_size(bprm, 0); 1568 mmput(bprm->mm); 1569 } 1570 1571 out_file: 1572 if (bprm->file) { 1573 allow_write_access(bprm->file); 1574 fput(bprm->file); 1575 } 1576 1577 out_unmark: 1578 if (clear_in_exec) 1579 current->fs->in_exec = 0; 1580 current->in_execve = 0; 1581 1582 out_free: 1583 free_bprm(bprm); 1584 1585 out_files: 1586 if (displaced) 1587 reset_files_struct(displaced); 1588 out_ret: 1589 return retval; 1590 } 1591 1592 int do_execve(const char *filename, 1593 const char __user *const __user *__argv, 1594 const char __user *const __user *__envp, 1595 struct pt_regs *regs) 1596 { 1597 struct user_arg_ptr argv = { .ptr.native = __argv }; 1598 struct user_arg_ptr envp = { .ptr.native = __envp }; 1599 return do_execve_common(filename, argv, envp, regs); 1600 } 1601 1602 #ifdef CONFIG_COMPAT 1603 int compat_do_execve(char *filename, 1604 compat_uptr_t __user *__argv, 1605 compat_uptr_t __user *__envp, 1606 struct pt_regs *regs) 1607 { 1608 struct user_arg_ptr argv = { 1609 .is_compat = true, 1610 .ptr.compat = __argv, 1611 }; 1612 struct user_arg_ptr envp = { 1613 .is_compat = true, 1614 .ptr.compat = __envp, 1615 }; 1616 return do_execve_common(filename, argv, envp, regs); 1617 } 1618 #endif 1619 1620 void set_binfmt(struct linux_binfmt *new) 1621 { 1622 struct mm_struct *mm = current->mm; 1623 1624 if (mm->binfmt) 1625 module_put(mm->binfmt->module); 1626 1627 mm->binfmt = new; 1628 if (new) 1629 __module_get(new->module); 1630 } 1631 1632 EXPORT_SYMBOL(set_binfmt); 1633 1634 static int expand_corename(struct core_name *cn) 1635 { 1636 char *old_corename = cn->corename; 1637 1638 cn->size = CORENAME_MAX_SIZE * atomic_inc_return(&call_count); 1639 cn->corename = krealloc(old_corename, cn->size, GFP_KERNEL); 1640 1641 if (!cn->corename) { 1642 kfree(old_corename); 1643 return -ENOMEM; 1644 } 1645 1646 return 0; 1647 } 1648 1649 static int cn_printf(struct core_name *cn, const char *fmt, ...) 1650 { 1651 char *cur; 1652 int need; 1653 int ret; 1654 va_list arg; 1655 1656 va_start(arg, fmt); 1657 need = vsnprintf(NULL, 0, fmt, arg); 1658 va_end(arg); 1659 1660 if (likely(need < cn->size - cn->used - 1)) 1661 goto out_printf; 1662 1663 ret = expand_corename(cn); 1664 if (ret) 1665 goto expand_fail; 1666 1667 out_printf: 1668 cur = cn->corename + cn->used; 1669 va_start(arg, fmt); 1670 vsnprintf(cur, need + 1, fmt, arg); 1671 va_end(arg); 1672 cn->used += need; 1673 return 0; 1674 1675 expand_fail: 1676 return ret; 1677 } 1678 1679 static void cn_escape(char *str) 1680 { 1681 for (; *str; str++) 1682 if (*str == '/') 1683 *str = '!'; 1684 } 1685 1686 static int cn_print_exe_file(struct core_name *cn) 1687 { 1688 struct file *exe_file; 1689 char *pathbuf, *path; 1690 int ret; 1691 1692 exe_file = get_mm_exe_file(current->mm); 1693 if (!exe_file) { 1694 char *commstart = cn->corename + cn->used; 1695 ret = cn_printf(cn, "%s (path unknown)", current->comm); 1696 cn_escape(commstart); 1697 return ret; 1698 } 1699 1700 pathbuf = kmalloc(PATH_MAX, GFP_TEMPORARY); 1701 if (!pathbuf) { 1702 ret = -ENOMEM; 1703 goto put_exe_file; 1704 } 1705 1706 path = d_path(&exe_file->f_path, pathbuf, PATH_MAX); 1707 if (IS_ERR(path)) { 1708 ret = PTR_ERR(path); 1709 goto free_buf; 1710 } 1711 1712 cn_escape(path); 1713 1714 ret = cn_printf(cn, "%s", path); 1715 1716 free_buf: 1717 kfree(pathbuf); 1718 put_exe_file: 1719 fput(exe_file); 1720 return ret; 1721 } 1722 1723 /* format_corename will inspect the pattern parameter, and output a 1724 * name into corename, which must have space for at least 1725 * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. 1726 */ 1727 static int format_corename(struct core_name *cn, long signr) 1728 { 1729 const struct cred *cred = current_cred(); 1730 const char *pat_ptr = core_pattern; 1731 int ispipe = (*pat_ptr == '|'); 1732 int pid_in_pattern = 0; 1733 int err = 0; 1734 1735 cn->size = CORENAME_MAX_SIZE * atomic_read(&call_count); 1736 cn->corename = kmalloc(cn->size, GFP_KERNEL); 1737 cn->used = 0; 1738 1739 if (!cn->corename) 1740 return -ENOMEM; 1741 1742 /* Repeat as long as we have more pattern to process and more output 1743 space */ 1744 while (*pat_ptr) { 1745 if (*pat_ptr != '%') { 1746 if (*pat_ptr == 0) 1747 goto out; 1748 err = cn_printf(cn, "%c", *pat_ptr++); 1749 } else { 1750 switch (*++pat_ptr) { 1751 /* single % at the end, drop that */ 1752 case 0: 1753 goto out; 1754 /* Double percent, output one percent */ 1755 case '%': 1756 err = cn_printf(cn, "%c", '%'); 1757 break; 1758 /* pid */ 1759 case 'p': 1760 pid_in_pattern = 1; 1761 err = cn_printf(cn, "%d", 1762 task_tgid_vnr(current)); 1763 break; 1764 /* uid */ 1765 case 'u': 1766 err = cn_printf(cn, "%d", cred->uid); 1767 break; 1768 /* gid */ 1769 case 'g': 1770 err = cn_printf(cn, "%d", cred->gid); 1771 break; 1772 /* signal that caused the coredump */ 1773 case 's': 1774 err = cn_printf(cn, "%ld", signr); 1775 break; 1776 /* UNIX time of coredump */ 1777 case 't': { 1778 struct timeval tv; 1779 do_gettimeofday(&tv); 1780 err = cn_printf(cn, "%lu", tv.tv_sec); 1781 break; 1782 } 1783 /* hostname */ 1784 case 'h': { 1785 char *namestart = cn->corename + cn->used; 1786 down_read(&uts_sem); 1787 err = cn_printf(cn, "%s", 1788 utsname()->nodename); 1789 up_read(&uts_sem); 1790 cn_escape(namestart); 1791 break; 1792 } 1793 /* executable */ 1794 case 'e': { 1795 char *commstart = cn->corename + cn->used; 1796 err = cn_printf(cn, "%s", current->comm); 1797 cn_escape(commstart); 1798 break; 1799 } 1800 case 'E': 1801 err = cn_print_exe_file(cn); 1802 break; 1803 /* core limit size */ 1804 case 'c': 1805 err = cn_printf(cn, "%lu", 1806 rlimit(RLIMIT_CORE)); 1807 break; 1808 default: 1809 break; 1810 } 1811 ++pat_ptr; 1812 } 1813 1814 if (err) 1815 return err; 1816 } 1817 1818 /* Backward compatibility with core_uses_pid: 1819 * 1820 * If core_pattern does not include a %p (as is the default) 1821 * and core_uses_pid is set, then .%pid will be appended to 1822 * the filename. Do not do this for piped commands. */ 1823 if (!ispipe && !pid_in_pattern && core_uses_pid) { 1824 err = cn_printf(cn, ".%d", task_tgid_vnr(current)); 1825 if (err) 1826 return err; 1827 } 1828 out: 1829 return ispipe; 1830 } 1831 1832 static int zap_process(struct task_struct *start, int exit_code) 1833 { 1834 struct task_struct *t; 1835 int nr = 0; 1836 1837 start->signal->flags = SIGNAL_GROUP_EXIT; 1838 start->signal->group_exit_code = exit_code; 1839 start->signal->group_stop_count = 0; 1840 1841 t = start; 1842 do { 1843 task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK); 1844 if (t != current && t->mm) { 1845 sigaddset(&t->pending.signal, SIGKILL); 1846 signal_wake_up(t, 1); 1847 nr++; 1848 } 1849 } while_each_thread(start, t); 1850 1851 return nr; 1852 } 1853 1854 static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm, 1855 struct core_state *core_state, int exit_code) 1856 { 1857 struct task_struct *g, *p; 1858 unsigned long flags; 1859 int nr = -EAGAIN; 1860 1861 spin_lock_irq(&tsk->sighand->siglock); 1862 if (!signal_group_exit(tsk->signal)) { 1863 mm->core_state = core_state; 1864 nr = zap_process(tsk, exit_code); 1865 } 1866 spin_unlock_irq(&tsk->sighand->siglock); 1867 if (unlikely(nr < 0)) 1868 return nr; 1869 1870 if (atomic_read(&mm->mm_users) == nr + 1) 1871 goto done; 1872 /* 1873 * We should find and kill all tasks which use this mm, and we should 1874 * count them correctly into ->nr_threads. We don't take tasklist 1875 * lock, but this is safe wrt: 1876 * 1877 * fork: 1878 * None of sub-threads can fork after zap_process(leader). All 1879 * processes which were created before this point should be 1880 * visible to zap_threads() because copy_process() adds the new 1881 * process to the tail of init_task.tasks list, and lock/unlock 1882 * of ->siglock provides a memory barrier. 1883 * 1884 * do_exit: 1885 * The caller holds mm->mmap_sem. This means that the task which 1886 * uses this mm can't pass exit_mm(), so it can't exit or clear 1887 * its ->mm. 1888 * 1889 * de_thread: 1890 * It does list_replace_rcu(&leader->tasks, ¤t->tasks), 1891 * we must see either old or new leader, this does not matter. 1892 * However, it can change p->sighand, so lock_task_sighand(p) 1893 * must be used. Since p->mm != NULL and we hold ->mmap_sem 1894 * it can't fail. 1895 * 1896 * Note also that "g" can be the old leader with ->mm == NULL 1897 * and already unhashed and thus removed from ->thread_group. 1898 * This is OK, __unhash_process()->list_del_rcu() does not 1899 * clear the ->next pointer, we will find the new leader via 1900 * next_thread(). 1901 */ 1902 rcu_read_lock(); 1903 for_each_process(g) { 1904 if (g == tsk->group_leader) 1905 continue; 1906 if (g->flags & PF_KTHREAD) 1907 continue; 1908 p = g; 1909 do { 1910 if (p->mm) { 1911 if (unlikely(p->mm == mm)) { 1912 lock_task_sighand(p, &flags); 1913 nr += zap_process(p, exit_code); 1914 unlock_task_sighand(p, &flags); 1915 } 1916 break; 1917 } 1918 } while_each_thread(g, p); 1919 } 1920 rcu_read_unlock(); 1921 done: 1922 atomic_set(&core_state->nr_threads, nr); 1923 return nr; 1924 } 1925 1926 static int coredump_wait(int exit_code, struct core_state *core_state) 1927 { 1928 struct task_struct *tsk = current; 1929 struct mm_struct *mm = tsk->mm; 1930 int core_waiters = -EBUSY; 1931 1932 init_completion(&core_state->startup); 1933 core_state->dumper.task = tsk; 1934 core_state->dumper.next = NULL; 1935 1936 down_write(&mm->mmap_sem); 1937 if (!mm->core_state) 1938 core_waiters = zap_threads(tsk, mm, core_state, exit_code); 1939 up_write(&mm->mmap_sem); 1940 1941 if (core_waiters > 0) 1942 wait_for_completion(&core_state->startup); 1943 1944 return core_waiters; 1945 } 1946 1947 static void coredump_finish(struct mm_struct *mm) 1948 { 1949 struct core_thread *curr, *next; 1950 struct task_struct *task; 1951 1952 next = mm->core_state->dumper.next; 1953 while ((curr = next) != NULL) { 1954 next = curr->next; 1955 task = curr->task; 1956 /* 1957 * see exit_mm(), curr->task must not see 1958 * ->task == NULL before we read ->next. 1959 */ 1960 smp_mb(); 1961 curr->task = NULL; 1962 wake_up_process(task); 1963 } 1964 1965 mm->core_state = NULL; 1966 } 1967 1968 /* 1969 * set_dumpable converts traditional three-value dumpable to two flags and 1970 * stores them into mm->flags. It modifies lower two bits of mm->flags, but 1971 * these bits are not changed atomically. So get_dumpable can observe the 1972 * intermediate state. To avoid doing unexpected behavior, get get_dumpable 1973 * return either old dumpable or new one by paying attention to the order of 1974 * modifying the bits. 1975 * 1976 * dumpable | mm->flags (binary) 1977 * old new | initial interim final 1978 * ---------+----------------------- 1979 * 0 1 | 00 01 01 1980 * 0 2 | 00 10(*) 11 1981 * 1 0 | 01 00 00 1982 * 1 2 | 01 11 11 1983 * 2 0 | 11 10(*) 00 1984 * 2 1 | 11 11 01 1985 * 1986 * (*) get_dumpable regards interim value of 10 as 11. 1987 */ 1988 void set_dumpable(struct mm_struct *mm, int value) 1989 { 1990 switch (value) { 1991 case 0: 1992 clear_bit(MMF_DUMPABLE, &mm->flags); 1993 smp_wmb(); 1994 clear_bit(MMF_DUMP_SECURELY, &mm->flags); 1995 break; 1996 case 1: 1997 set_bit(MMF_DUMPABLE, &mm->flags); 1998 smp_wmb(); 1999 clear_bit(MMF_DUMP_SECURELY, &mm->flags); 2000 break; 2001 case 2: 2002 set_bit(MMF_DUMP_SECURELY, &mm->flags); 2003 smp_wmb(); 2004 set_bit(MMF_DUMPABLE, &mm->flags); 2005 break; 2006 } 2007 } 2008 2009 static int __get_dumpable(unsigned long mm_flags) 2010 { 2011 int ret; 2012 2013 ret = mm_flags & MMF_DUMPABLE_MASK; 2014 return (ret >= 2) ? 2 : ret; 2015 } 2016 2017 int get_dumpable(struct mm_struct *mm) 2018 { 2019 return __get_dumpable(mm->flags); 2020 } 2021 2022 static void wait_for_dump_helpers(struct file *file) 2023 { 2024 struct pipe_inode_info *pipe; 2025 2026 pipe = file->f_path.dentry->d_inode->i_pipe; 2027 2028 pipe_lock(pipe); 2029 pipe->readers++; 2030 pipe->writers--; 2031 2032 while ((pipe->readers > 1) && (!signal_pending(current))) { 2033 wake_up_interruptible_sync(&pipe->wait); 2034 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); 2035 pipe_wait(pipe); 2036 } 2037 2038 pipe->readers--; 2039 pipe->writers++; 2040 pipe_unlock(pipe); 2041 2042 } 2043 2044 2045 /* 2046 * umh_pipe_setup 2047 * helper function to customize the process used 2048 * to collect the core in userspace. Specifically 2049 * it sets up a pipe and installs it as fd 0 (stdin) 2050 * for the process. Returns 0 on success, or 2051 * PTR_ERR on failure. 2052 * Note that it also sets the core limit to 1. This 2053 * is a special value that we use to trap recursive 2054 * core dumps 2055 */ 2056 static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) 2057 { 2058 struct file *rp, *wp; 2059 struct fdtable *fdt; 2060 struct coredump_params *cp = (struct coredump_params *)info->data; 2061 struct files_struct *cf = current->files; 2062 2063 wp = create_write_pipe(0); 2064 if (IS_ERR(wp)) 2065 return PTR_ERR(wp); 2066 2067 rp = create_read_pipe(wp, 0); 2068 if (IS_ERR(rp)) { 2069 free_write_pipe(wp); 2070 return PTR_ERR(rp); 2071 } 2072 2073 cp->file = wp; 2074 2075 sys_close(0); 2076 fd_install(0, rp); 2077 spin_lock(&cf->file_lock); 2078 fdt = files_fdtable(cf); 2079 __set_open_fd(0, fdt); 2080 __clear_close_on_exec(0, fdt); 2081 spin_unlock(&cf->file_lock); 2082 2083 /* and disallow core files too */ 2084 current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1}; 2085 2086 return 0; 2087 } 2088 2089 void do_coredump(long signr, int exit_code, struct pt_regs *regs) 2090 { 2091 struct core_state core_state; 2092 struct core_name cn; 2093 struct mm_struct *mm = current->mm; 2094 struct linux_binfmt * binfmt; 2095 const struct cred *old_cred; 2096 struct cred *cred; 2097 int retval = 0; 2098 int flag = 0; 2099 int ispipe; 2100 static atomic_t core_dump_count = ATOMIC_INIT(0); 2101 struct coredump_params cprm = { 2102 .signr = signr, 2103 .regs = regs, 2104 .limit = rlimit(RLIMIT_CORE), 2105 /* 2106 * We must use the same mm->flags while dumping core to avoid 2107 * inconsistency of bit flags, since this flag is not protected 2108 * by any locks. 2109 */ 2110 .mm_flags = mm->flags, 2111 }; 2112 2113 audit_core_dumps(signr); 2114 2115 binfmt = mm->binfmt; 2116 if (!binfmt || !binfmt->core_dump) 2117 goto fail; 2118 if (!__get_dumpable(cprm.mm_flags)) 2119 goto fail; 2120 2121 cred = prepare_creds(); 2122 if (!cred) 2123 goto fail; 2124 /* 2125 * We cannot trust fsuid as being the "true" uid of the 2126 * process nor do we know its entire history. We only know it 2127 * was tainted so we dump it as root in mode 2. 2128 */ 2129 if (__get_dumpable(cprm.mm_flags) == 2) { 2130 /* Setuid core dump mode */ 2131 flag = O_EXCL; /* Stop rewrite attacks */ 2132 cred->fsuid = 0; /* Dump root private */ 2133 } 2134 2135 retval = coredump_wait(exit_code, &core_state); 2136 if (retval < 0) 2137 goto fail_creds; 2138 2139 old_cred = override_creds(cred); 2140 2141 /* 2142 * Clear any false indication of pending signals that might 2143 * be seen by the filesystem code called to write the core file. 2144 */ 2145 clear_thread_flag(TIF_SIGPENDING); 2146 2147 ispipe = format_corename(&cn, signr); 2148 2149 if (ispipe) { 2150 int dump_count; 2151 char **helper_argv; 2152 2153 if (ispipe < 0) { 2154 printk(KERN_WARNING "format_corename failed\n"); 2155 printk(KERN_WARNING "Aborting core\n"); 2156 goto fail_corename; 2157 } 2158 2159 if (cprm.limit == 1) { 2160 /* 2161 * Normally core limits are irrelevant to pipes, since 2162 * we're not writing to the file system, but we use 2163 * cprm.limit of 1 here as a speacial value. Any 2164 * non-1 limit gets set to RLIM_INFINITY below, but 2165 * a limit of 0 skips the dump. This is a consistent 2166 * way to catch recursive crashes. We can still crash 2167 * if the core_pattern binary sets RLIM_CORE = !1 2168 * but it runs as root, and can do lots of stupid things 2169 * Note that we use task_tgid_vnr here to grab the pid 2170 * of the process group leader. That way we get the 2171 * right pid if a thread in a multi-threaded 2172 * core_pattern process dies. 2173 */ 2174 printk(KERN_WARNING 2175 "Process %d(%s) has RLIMIT_CORE set to 1\n", 2176 task_tgid_vnr(current), current->comm); 2177 printk(KERN_WARNING "Aborting core\n"); 2178 goto fail_unlock; 2179 } 2180 cprm.limit = RLIM_INFINITY; 2181 2182 dump_count = atomic_inc_return(&core_dump_count); 2183 if (core_pipe_limit && (core_pipe_limit < dump_count)) { 2184 printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n", 2185 task_tgid_vnr(current), current->comm); 2186 printk(KERN_WARNING "Skipping core dump\n"); 2187 goto fail_dropcount; 2188 } 2189 2190 helper_argv = argv_split(GFP_KERNEL, cn.corename+1, NULL); 2191 if (!helper_argv) { 2192 printk(KERN_WARNING "%s failed to allocate memory\n", 2193 __func__); 2194 goto fail_dropcount; 2195 } 2196 2197 retval = call_usermodehelper_fns(helper_argv[0], helper_argv, 2198 NULL, UMH_WAIT_EXEC, umh_pipe_setup, 2199 NULL, &cprm); 2200 argv_free(helper_argv); 2201 if (retval) { 2202 printk(KERN_INFO "Core dump to %s pipe failed\n", 2203 cn.corename); 2204 goto close_fail; 2205 } 2206 } else { 2207 struct inode *inode; 2208 2209 if (cprm.limit < binfmt->min_coredump) 2210 goto fail_unlock; 2211 2212 cprm.file = filp_open(cn.corename, 2213 O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag, 2214 0600); 2215 if (IS_ERR(cprm.file)) 2216 goto fail_unlock; 2217 2218 inode = cprm.file->f_path.dentry->d_inode; 2219 if (inode->i_nlink > 1) 2220 goto close_fail; 2221 if (d_unhashed(cprm.file->f_path.dentry)) 2222 goto close_fail; 2223 /* 2224 * AK: actually i see no reason to not allow this for named 2225 * pipes etc, but keep the previous behaviour for now. 2226 */ 2227 if (!S_ISREG(inode->i_mode)) 2228 goto close_fail; 2229 /* 2230 * Dont allow local users get cute and trick others to coredump 2231 * into their pre-created files. 2232 */ 2233 if (inode->i_uid != current_fsuid()) 2234 goto close_fail; 2235 if (!cprm.file->f_op || !cprm.file->f_op->write) 2236 goto close_fail; 2237 if (do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file)) 2238 goto close_fail; 2239 } 2240 2241 retval = binfmt->core_dump(&cprm); 2242 if (retval) 2243 current->signal->group_exit_code |= 0x80; 2244 2245 if (ispipe && core_pipe_limit) 2246 wait_for_dump_helpers(cprm.file); 2247 close_fail: 2248 if (cprm.file) 2249 filp_close(cprm.file, NULL); 2250 fail_dropcount: 2251 if (ispipe) 2252 atomic_dec(&core_dump_count); 2253 fail_unlock: 2254 kfree(cn.corename); 2255 fail_corename: 2256 coredump_finish(mm); 2257 revert_creds(old_cred); 2258 fail_creds: 2259 put_cred(cred); 2260 fail: 2261 return; 2262 } 2263 2264 /* 2265 * Core dumping helper functions. These are the only things you should 2266 * do on a core-file: use only these functions to write out all the 2267 * necessary info. 2268 */ 2269 int dump_write(struct file *file, const void *addr, int nr) 2270 { 2271 return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr; 2272 } 2273 EXPORT_SYMBOL(dump_write); 2274 2275 int dump_seek(struct file *file, loff_t off) 2276 { 2277 int ret = 1; 2278 2279 if (file->f_op->llseek && file->f_op->llseek != no_llseek) { 2280 if (file->f_op->llseek(file, off, SEEK_CUR) < 0) 2281 return 0; 2282 } else { 2283 char *buf = (char *)get_zeroed_page(GFP_KERNEL); 2284 2285 if (!buf) 2286 return 0; 2287 while (off > 0) { 2288 unsigned long n = off; 2289 2290 if (n > PAGE_SIZE) 2291 n = PAGE_SIZE; 2292 if (!dump_write(file, buf, n)) { 2293 ret = 0; 2294 break; 2295 } 2296 off -= n; 2297 } 2298 free_page((unsigned long)buf); 2299 } 2300 return ret; 2301 } 2302 EXPORT_SYMBOL(dump_seek); 2303