xref: /openbmc/linux/drivers/usb/storage/uas.c (revision 93c747ed00c1c74316645f7761f0cdb3f3d3952d)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * USB Attached SCSI
4  * Note that this is not the same as the USB Mass Storage driver
5  *
6  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7  * Copyright Matthew Wilcox for Intel Corp, 2010
8  * Copyright Sarah Sharp for Intel Corp, 2010
9  */
10 
11 #include <linux/blkdev.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14 #include <linux/module.h>
15 #include <linux/usb.h>
16 #include <linux/usb_usual.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/usb/storage.h>
19 #include <linux/usb/uas.h>
20 
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_eh.h>
23 #include <scsi/scsi_dbg.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <scsi/scsi_device.h>
26 #include <scsi/scsi_host.h>
27 #include <scsi/scsi_tcq.h>
28 
29 #include "uas-detect.h"
30 #include "scsiglue.h"
31 
32 #define MAX_CMNDS 256
33 
34 struct uas_dev_info {
35 	struct usb_interface *intf;
36 	struct usb_device *udev;
37 	struct usb_anchor cmd_urbs;
38 	struct usb_anchor sense_urbs;
39 	struct usb_anchor data_urbs;
40 	unsigned long flags;
41 	int qdepth, resetting;
42 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
43 	unsigned use_streams:1;
44 	unsigned shutdown:1;
45 	struct scsi_cmnd *cmnd[MAX_CMNDS];
46 	spinlock_t lock;
47 	struct work_struct work;
48 	struct work_struct scan_work;      /* for async scanning */
49 };
50 
51 enum {
52 	SUBMIT_STATUS_URB	= BIT(1),
53 	ALLOC_DATA_IN_URB	= BIT(2),
54 	SUBMIT_DATA_IN_URB	= BIT(3),
55 	ALLOC_DATA_OUT_URB	= BIT(4),
56 	SUBMIT_DATA_OUT_URB	= BIT(5),
57 	ALLOC_CMD_URB		= BIT(6),
58 	SUBMIT_CMD_URB		= BIT(7),
59 	COMMAND_INFLIGHT        = BIT(8),
60 	DATA_IN_URB_INFLIGHT    = BIT(9),
61 	DATA_OUT_URB_INFLIGHT   = BIT(10),
62 	COMMAND_ABORTED         = BIT(11),
63 	IS_IN_WORK_LIST         = BIT(12),
64 };
65 
66 /* Overrides scsi_pointer */
67 struct uas_cmd_info {
68 	unsigned int state;
69 	unsigned int uas_tag;
70 	struct urb *cmd_urb;
71 	struct urb *data_in_urb;
72 	struct urb *data_out_urb;
73 };
74 
75 /* I hate forward declarations, but I actually have a loop */
76 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
77 				struct uas_dev_info *devinfo);
78 static void uas_do_work(struct work_struct *work);
79 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
80 static void uas_free_streams(struct uas_dev_info *devinfo);
81 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
82 				int status);
83 
84 /*
85  * This driver needs its own workqueue, as we need to control memory allocation.
86  *
87  * In the course of error handling and power management uas_wait_for_pending_cmnds()
88  * needs to flush pending work items. In these contexts we cannot allocate memory
89  * by doing block IO as we would deadlock. For the same reason we cannot wait
90  * for anything allocating memory not heeding these constraints.
91  *
92  * So we have to control all work items that can be on the workqueue we flush.
93  * Hence we cannot share a queue and need our own.
94  */
95 static struct workqueue_struct *workqueue;
96 
97 static void uas_do_work(struct work_struct *work)
98 {
99 	struct uas_dev_info *devinfo =
100 		container_of(work, struct uas_dev_info, work);
101 	struct uas_cmd_info *cmdinfo;
102 	struct scsi_cmnd *cmnd;
103 	unsigned long flags;
104 	int i, err;
105 
106 	spin_lock_irqsave(&devinfo->lock, flags);
107 
108 	if (devinfo->resetting)
109 		goto out;
110 
111 	for (i = 0; i < devinfo->qdepth; i++) {
112 		if (!devinfo->cmnd[i])
113 			continue;
114 
115 		cmnd = devinfo->cmnd[i];
116 		cmdinfo = (void *)&cmnd->SCp;
117 
118 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
119 			continue;
120 
121 		err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
122 		if (!err)
123 			cmdinfo->state &= ~IS_IN_WORK_LIST;
124 		else
125 			queue_work(workqueue, &devinfo->work);
126 	}
127 out:
128 	spin_unlock_irqrestore(&devinfo->lock, flags);
129 }
130 
131 static void uas_scan_work(struct work_struct *work)
132 {
133 	struct uas_dev_info *devinfo =
134 		container_of(work, struct uas_dev_info, scan_work);
135 	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
136 
137 	dev_dbg(&devinfo->intf->dev, "starting scan\n");
138 	scsi_scan_host(shost);
139 	dev_dbg(&devinfo->intf->dev, "scan complete\n");
140 }
141 
142 static void uas_add_work(struct uas_cmd_info *cmdinfo)
143 {
144 	struct scsi_pointer *scp = (void *)cmdinfo;
145 	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
146 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
147 
148 	lockdep_assert_held(&devinfo->lock);
149 	cmdinfo->state |= IS_IN_WORK_LIST;
150 	queue_work(workqueue, &devinfo->work);
151 }
152 
153 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
154 {
155 	struct uas_cmd_info *cmdinfo;
156 	struct scsi_cmnd *cmnd;
157 	unsigned long flags;
158 	int i, err;
159 
160 	spin_lock_irqsave(&devinfo->lock, flags);
161 	for (i = 0; i < devinfo->qdepth; i++) {
162 		if (!devinfo->cmnd[i])
163 			continue;
164 
165 		cmnd = devinfo->cmnd[i];
166 		cmdinfo = (void *)&cmnd->SCp;
167 		uas_log_cmd_state(cmnd, __func__, 0);
168 		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
169 		cmdinfo->state &= ~COMMAND_INFLIGHT;
170 		cmnd->result = result << 16;
171 		err = uas_try_complete(cmnd, __func__);
172 		WARN_ON(err != 0);
173 	}
174 	spin_unlock_irqrestore(&devinfo->lock, flags);
175 }
176 
177 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
178 {
179 	struct sense_iu *sense_iu = urb->transfer_buffer;
180 	struct scsi_device *sdev = cmnd->device;
181 
182 	if (urb->actual_length > 16) {
183 		unsigned len = be16_to_cpup(&sense_iu->len);
184 		if (len + 16 != urb->actual_length) {
185 			int newlen = min(len + 16, urb->actual_length) - 16;
186 			if (newlen < 0)
187 				newlen = 0;
188 			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 				"disagrees with IU sense data length %d, "
190 				"using %d bytes of sense data\n", __func__,
191 					urb->actual_length, len, newlen);
192 			len = newlen;
193 		}
194 		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 	}
196 
197 	cmnd->result = sense_iu->status;
198 }
199 
200 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
201 			      int status)
202 {
203 	struct uas_cmd_info *ci = (void *)&cmnd->SCp;
204 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
205 
206 	if (status == -ENODEV) /* too late */
207 		return;
208 
209 	scmd_printk(KERN_INFO, cmnd,
210 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
211 		    prefix, status, cmdinfo->uas_tag,
212 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
213 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
214 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
215 		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
216 		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
217 		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
218 		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
219 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
220 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
221 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
222 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
223 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
224 	scsi_print_command(cmnd);
225 }
226 
227 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
228 {
229 	struct uas_cmd_info *cmdinfo;
230 
231 	if (!cmnd)
232 		return;
233 
234 	cmdinfo = (void *)&cmnd->SCp;
235 
236 	if (cmdinfo->state & SUBMIT_CMD_URB)
237 		usb_free_urb(cmdinfo->cmd_urb);
238 
239 	/* data urbs may have never gotten their submit flag set */
240 	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
241 		usb_free_urb(cmdinfo->data_in_urb);
242 	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
243 		usb_free_urb(cmdinfo->data_out_urb);
244 }
245 
246 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
247 {
248 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
249 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
250 
251 	lockdep_assert_held(&devinfo->lock);
252 	if (cmdinfo->state & (COMMAND_INFLIGHT |
253 			      DATA_IN_URB_INFLIGHT |
254 			      DATA_OUT_URB_INFLIGHT |
255 			      COMMAND_ABORTED))
256 		return -EBUSY;
257 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
258 	uas_free_unsubmitted_urbs(cmnd);
259 	cmnd->scsi_done(cmnd);
260 	return 0;
261 }
262 
263 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
264 			  unsigned direction)
265 {
266 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
267 	int err;
268 
269 	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
270 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
271 	if (err) {
272 		uas_add_work(cmdinfo);
273 	}
274 }
275 
276 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
277 {
278 	u8 response_code = riu->response_code;
279 
280 	switch (response_code) {
281 	case RC_INCORRECT_LUN:
282 		set_host_byte(cmnd, DID_BAD_TARGET);
283 		break;
284 	case RC_TMF_SUCCEEDED:
285 		set_host_byte(cmnd, DID_OK);
286 		break;
287 	case RC_TMF_NOT_SUPPORTED:
288 		set_host_byte(cmnd, DID_TARGET_FAILURE);
289 		break;
290 	default:
291 		uas_log_cmd_state(cmnd, "response iu", response_code);
292 		set_host_byte(cmnd, DID_ERROR);
293 		break;
294 	}
295 
296 	return response_code == RC_TMF_SUCCEEDED;
297 }
298 
299 static void uas_stat_cmplt(struct urb *urb)
300 {
301 	struct iu *iu = urb->transfer_buffer;
302 	struct Scsi_Host *shost = urb->context;
303 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
304 	struct urb *data_in_urb = NULL;
305 	struct urb *data_out_urb = NULL;
306 	struct scsi_cmnd *cmnd;
307 	struct uas_cmd_info *cmdinfo;
308 	unsigned long flags;
309 	unsigned int idx;
310 	int status = urb->status;
311 	bool success;
312 
313 	spin_lock_irqsave(&devinfo->lock, flags);
314 
315 	if (devinfo->resetting)
316 		goto out;
317 
318 	if (status) {
319 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
320 			dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
321 		goto out;
322 	}
323 
324 	idx = be16_to_cpup(&iu->tag) - 1;
325 	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
326 		dev_err(&urb->dev->dev,
327 			"stat urb: no pending cmd for uas-tag %d\n", idx + 1);
328 		goto out;
329 	}
330 
331 	cmnd = devinfo->cmnd[idx];
332 	cmdinfo = (void *)&cmnd->SCp;
333 
334 	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
335 		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
336 		goto out;
337 	}
338 
339 	switch (iu->iu_id) {
340 	case IU_ID_STATUS:
341 		uas_sense(urb, cmnd);
342 		if (cmnd->result != 0) {
343 			/* cancel data transfers on error */
344 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
345 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
346 		}
347 		cmdinfo->state &= ~COMMAND_INFLIGHT;
348 		uas_try_complete(cmnd, __func__);
349 		break;
350 	case IU_ID_READ_READY:
351 		if (!cmdinfo->data_in_urb ||
352 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
353 			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
354 			break;
355 		}
356 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
357 		break;
358 	case IU_ID_WRITE_READY:
359 		if (!cmdinfo->data_out_urb ||
360 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
361 			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
362 			break;
363 		}
364 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
365 		break;
366 	case IU_ID_RESPONSE:
367 		cmdinfo->state &= ~COMMAND_INFLIGHT;
368 		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
369 		if (!success) {
370 			/* Error, cancel data transfers */
371 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
372 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
373 		}
374 		uas_try_complete(cmnd, __func__);
375 		break;
376 	default:
377 		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
378 	}
379 out:
380 	usb_free_urb(urb);
381 	spin_unlock_irqrestore(&devinfo->lock, flags);
382 
383 	/* Unlinking of data urbs must be done without holding the lock */
384 	if (data_in_urb) {
385 		usb_unlink_urb(data_in_urb);
386 		usb_put_urb(data_in_urb);
387 	}
388 	if (data_out_urb) {
389 		usb_unlink_urb(data_out_urb);
390 		usb_put_urb(data_out_urb);
391 	}
392 }
393 
394 static void uas_data_cmplt(struct urb *urb)
395 {
396 	struct scsi_cmnd *cmnd = urb->context;
397 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
398 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
399 	struct scsi_data_buffer *sdb = &cmnd->sdb;
400 	unsigned long flags;
401 	int status = urb->status;
402 
403 	spin_lock_irqsave(&devinfo->lock, flags);
404 
405 	if (cmdinfo->data_in_urb == urb) {
406 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
407 		cmdinfo->data_in_urb = NULL;
408 	} else if (cmdinfo->data_out_urb == urb) {
409 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
410 		cmdinfo->data_out_urb = NULL;
411 	}
412 
413 	if (devinfo->resetting)
414 		goto out;
415 
416 	/* Data urbs should not complete before the cmd urb is submitted */
417 	if (cmdinfo->state & SUBMIT_CMD_URB) {
418 		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
419 		goto out;
420 	}
421 
422 	if (status) {
423 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
424 			uas_log_cmd_state(cmnd, "data cmplt err", status);
425 		/* error: no data transfered */
426 		scsi_set_resid(cmnd, sdb->length);
427 	} else {
428 		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
429 	}
430 	uas_try_complete(cmnd, __func__);
431 out:
432 	usb_free_urb(urb);
433 	spin_unlock_irqrestore(&devinfo->lock, flags);
434 }
435 
436 static void uas_cmd_cmplt(struct urb *urb)
437 {
438 	if (urb->status)
439 		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
440 
441 	usb_free_urb(urb);
442 }
443 
444 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
445 				      struct scsi_cmnd *cmnd,
446 				      enum dma_data_direction dir)
447 {
448 	struct usb_device *udev = devinfo->udev;
449 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
450 	struct urb *urb = usb_alloc_urb(0, gfp);
451 	struct scsi_data_buffer *sdb = &cmnd->sdb;
452 	unsigned int pipe = (dir == DMA_FROM_DEVICE)
453 		? devinfo->data_in_pipe : devinfo->data_out_pipe;
454 
455 	if (!urb)
456 		goto out;
457 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
458 			  uas_data_cmplt, cmnd);
459 	if (devinfo->use_streams)
460 		urb->stream_id = cmdinfo->uas_tag;
461 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
462 	urb->sg = sdb->table.sgl;
463  out:
464 	return urb;
465 }
466 
467 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
468 				       struct scsi_cmnd *cmnd)
469 {
470 	struct usb_device *udev = devinfo->udev;
471 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
472 	struct urb *urb = usb_alloc_urb(0, gfp);
473 	struct sense_iu *iu;
474 
475 	if (!urb)
476 		goto out;
477 
478 	iu = kzalloc(sizeof(*iu), gfp);
479 	if (!iu)
480 		goto free;
481 
482 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
483 			  uas_stat_cmplt, cmnd->device->host);
484 	if (devinfo->use_streams)
485 		urb->stream_id = cmdinfo->uas_tag;
486 	urb->transfer_flags |= URB_FREE_BUFFER;
487  out:
488 	return urb;
489  free:
490 	usb_free_urb(urb);
491 	return NULL;
492 }
493 
494 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
495 					struct scsi_cmnd *cmnd)
496 {
497 	struct usb_device *udev = devinfo->udev;
498 	struct scsi_device *sdev = cmnd->device;
499 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
500 	struct urb *urb = usb_alloc_urb(0, gfp);
501 	struct command_iu *iu;
502 	int len;
503 
504 	if (!urb)
505 		goto out;
506 
507 	len = cmnd->cmd_len - 16;
508 	if (len < 0)
509 		len = 0;
510 	len = ALIGN(len, 4);
511 	iu = kzalloc(sizeof(*iu) + len, gfp);
512 	if (!iu)
513 		goto free;
514 
515 	iu->iu_id = IU_ID_COMMAND;
516 	iu->tag = cpu_to_be16(cmdinfo->uas_tag);
517 	iu->prio_attr = UAS_SIMPLE_TAG;
518 	iu->len = len;
519 	int_to_scsilun(sdev->lun, &iu->lun);
520 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
521 
522 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
523 							uas_cmd_cmplt, NULL);
524 	urb->transfer_flags |= URB_FREE_BUFFER;
525  out:
526 	return urb;
527  free:
528 	usb_free_urb(urb);
529 	return NULL;
530 }
531 
532 /*
533  * Why should I request the Status IU before sending the Command IU?  Spec
534  * says to, but also says the device may receive them in any order.  Seems
535  * daft to me.
536  */
537 
538 static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
539 {
540 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
541 	struct urb *urb;
542 	int err;
543 
544 	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
545 	if (!urb)
546 		return NULL;
547 	usb_anchor_urb(urb, &devinfo->sense_urbs);
548 	err = usb_submit_urb(urb, gfp);
549 	if (err) {
550 		usb_unanchor_urb(urb);
551 		uas_log_cmd_state(cmnd, "sense submit err", err);
552 		usb_free_urb(urb);
553 		return NULL;
554 	}
555 	return urb;
556 }
557 
558 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
559 			   struct uas_dev_info *devinfo)
560 {
561 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
562 	struct urb *urb;
563 	int err;
564 
565 	lockdep_assert_held(&devinfo->lock);
566 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
567 		urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
568 		if (!urb)
569 			return SCSI_MLQUEUE_DEVICE_BUSY;
570 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
571 	}
572 
573 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
574 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
575 							cmnd, DMA_FROM_DEVICE);
576 		if (!cmdinfo->data_in_urb)
577 			return SCSI_MLQUEUE_DEVICE_BUSY;
578 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
579 	}
580 
581 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
582 		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
583 		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
584 		if (err) {
585 			usb_unanchor_urb(cmdinfo->data_in_urb);
586 			uas_log_cmd_state(cmnd, "data in submit err", err);
587 			return SCSI_MLQUEUE_DEVICE_BUSY;
588 		}
589 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
590 		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
591 	}
592 
593 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
594 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
595 							cmnd, DMA_TO_DEVICE);
596 		if (!cmdinfo->data_out_urb)
597 			return SCSI_MLQUEUE_DEVICE_BUSY;
598 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
599 	}
600 
601 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
602 		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
603 		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
604 		if (err) {
605 			usb_unanchor_urb(cmdinfo->data_out_urb);
606 			uas_log_cmd_state(cmnd, "data out submit err", err);
607 			return SCSI_MLQUEUE_DEVICE_BUSY;
608 		}
609 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
610 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
611 	}
612 
613 	if (cmdinfo->state & ALLOC_CMD_URB) {
614 		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
615 		if (!cmdinfo->cmd_urb)
616 			return SCSI_MLQUEUE_DEVICE_BUSY;
617 		cmdinfo->state &= ~ALLOC_CMD_URB;
618 	}
619 
620 	if (cmdinfo->state & SUBMIT_CMD_URB) {
621 		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
622 		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
623 		if (err) {
624 			usb_unanchor_urb(cmdinfo->cmd_urb);
625 			uas_log_cmd_state(cmnd, "cmd submit err", err);
626 			return SCSI_MLQUEUE_DEVICE_BUSY;
627 		}
628 		cmdinfo->cmd_urb = NULL;
629 		cmdinfo->state &= ~SUBMIT_CMD_URB;
630 		cmdinfo->state |= COMMAND_INFLIGHT;
631 	}
632 
633 	return 0;
634 }
635 
636 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
637 					void (*done)(struct scsi_cmnd *))
638 {
639 	struct scsi_device *sdev = cmnd->device;
640 	struct uas_dev_info *devinfo = sdev->hostdata;
641 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
642 	unsigned long flags;
643 	int idx, err;
644 
645 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
646 
647 	/* Re-check scsi_block_requests now that we've the host-lock */
648 	if (cmnd->device->host->host_self_blocked)
649 		return SCSI_MLQUEUE_DEVICE_BUSY;
650 
651 	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
652 			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
653 		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
654 		       sizeof(usb_stor_sense_invalidCDB));
655 		cmnd->result = SAM_STAT_CHECK_CONDITION;
656 		cmnd->scsi_done(cmnd);
657 		return 0;
658 	}
659 
660 	spin_lock_irqsave(&devinfo->lock, flags);
661 
662 	if (devinfo->resetting) {
663 		set_host_byte(cmnd, DID_ERROR);
664 		cmnd->scsi_done(cmnd);
665 		goto zombie;
666 	}
667 
668 	/* Find a free uas-tag */
669 	for (idx = 0; idx < devinfo->qdepth; idx++) {
670 		if (!devinfo->cmnd[idx])
671 			break;
672 	}
673 	if (idx == devinfo->qdepth) {
674 		spin_unlock_irqrestore(&devinfo->lock, flags);
675 		return SCSI_MLQUEUE_DEVICE_BUSY;
676 	}
677 
678 	cmnd->scsi_done = done;
679 
680 	memset(cmdinfo, 0, sizeof(*cmdinfo));
681 	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
682 	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
683 
684 	switch (cmnd->sc_data_direction) {
685 	case DMA_FROM_DEVICE:
686 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
687 		break;
688 	case DMA_BIDIRECTIONAL:
689 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
690 		fallthrough;
691 	case DMA_TO_DEVICE:
692 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
693 		break;
694 	case DMA_NONE:
695 		break;
696 	}
697 
698 	if (!devinfo->use_streams)
699 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
700 
701 	err = uas_submit_urbs(cmnd, devinfo);
702 	/*
703 	 * in case of fatal errors the SCSI layer is peculiar
704 	 * a command that has finished is a success for the purpose
705 	 * of queueing, no matter how fatal the error
706 	 */
707 	if (err == -ENODEV) {
708 		set_host_byte(cmnd, DID_ERROR);
709 		cmnd->scsi_done(cmnd);
710 		goto zombie;
711 	}
712 	if (err) {
713 		/* If we did nothing, give up now */
714 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
715 			spin_unlock_irqrestore(&devinfo->lock, flags);
716 			return SCSI_MLQUEUE_DEVICE_BUSY;
717 		}
718 		uas_add_work(cmdinfo);
719 	}
720 
721 	devinfo->cmnd[idx] = cmnd;
722 zombie:
723 	spin_unlock_irqrestore(&devinfo->lock, flags);
724 	return 0;
725 }
726 
727 static DEF_SCSI_QCMD(uas_queuecommand)
728 
729 /*
730  * For now we do not support actually sending an abort to the device, so
731  * this eh always fails. Still we must define it to make sure that we've
732  * dropped all references to the cmnd in question once this function exits.
733  */
734 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
735 {
736 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
737 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
738 	struct urb *data_in_urb = NULL;
739 	struct urb *data_out_urb = NULL;
740 	unsigned long flags;
741 
742 	spin_lock_irqsave(&devinfo->lock, flags);
743 
744 	uas_log_cmd_state(cmnd, __func__, 0);
745 
746 	/* Ensure that try_complete does not call scsi_done */
747 	cmdinfo->state |= COMMAND_ABORTED;
748 
749 	/* Drop all refs to this cmnd, kill data urbs to break their ref */
750 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
751 	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
752 		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
753 	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
754 		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
755 
756 	uas_free_unsubmitted_urbs(cmnd);
757 
758 	spin_unlock_irqrestore(&devinfo->lock, flags);
759 
760 	if (data_in_urb) {
761 		usb_kill_urb(data_in_urb);
762 		usb_put_urb(data_in_urb);
763 	}
764 	if (data_out_urb) {
765 		usb_kill_urb(data_out_urb);
766 		usb_put_urb(data_out_urb);
767 	}
768 
769 	return FAILED;
770 }
771 
772 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
773 {
774 	struct scsi_device *sdev = cmnd->device;
775 	struct uas_dev_info *devinfo = sdev->hostdata;
776 	struct usb_device *udev = devinfo->udev;
777 	unsigned long flags;
778 	int err;
779 
780 	err = usb_lock_device_for_reset(udev, devinfo->intf);
781 	if (err) {
782 		shost_printk(KERN_ERR, sdev->host,
783 			     "%s FAILED to get lock err %d\n", __func__, err);
784 		return FAILED;
785 	}
786 
787 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
788 
789 	spin_lock_irqsave(&devinfo->lock, flags);
790 	devinfo->resetting = 1;
791 	spin_unlock_irqrestore(&devinfo->lock, flags);
792 
793 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
794 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
795 	usb_kill_anchored_urbs(&devinfo->data_urbs);
796 	uas_zap_pending(devinfo, DID_RESET);
797 
798 	err = usb_reset_device(udev);
799 
800 	spin_lock_irqsave(&devinfo->lock, flags);
801 	devinfo->resetting = 0;
802 	spin_unlock_irqrestore(&devinfo->lock, flags);
803 
804 	usb_unlock_device(udev);
805 
806 	if (err) {
807 		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
808 			     __func__, err);
809 		return FAILED;
810 	}
811 
812 	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
813 	return SUCCESS;
814 }
815 
816 static int uas_target_alloc(struct scsi_target *starget)
817 {
818 	struct uas_dev_info *devinfo = (struct uas_dev_info *)
819 			dev_to_shost(starget->dev.parent)->hostdata;
820 
821 	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
822 		starget->no_report_luns = 1;
823 
824 	return 0;
825 }
826 
827 static int uas_slave_alloc(struct scsi_device *sdev)
828 {
829 	struct uas_dev_info *devinfo =
830 		(struct uas_dev_info *)sdev->host->hostdata;
831 
832 	sdev->hostdata = devinfo;
833 
834 	/*
835 	 * The protocol has no requirements on alignment in the strict sense.
836 	 * Controllers may or may not have alignment restrictions.
837 	 * As this is not exported, we use an extremely conservative guess.
838 	 */
839 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
840 
841 	return 0;
842 }
843 
844 static int uas_slave_configure(struct scsi_device *sdev)
845 {
846 	struct uas_dev_info *devinfo = sdev->hostdata;
847 	struct device *dev = sdev->host->dma_dev;
848 
849 	if (devinfo->flags & US_FL_MAX_SECTORS_64)
850 		blk_queue_max_hw_sectors(sdev->request_queue, 64);
851 	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
852 		blk_queue_max_hw_sectors(sdev->request_queue, 240);
853 	else if (devinfo->udev->speed >= USB_SPEED_SUPER)
854 		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
855 
856 	blk_queue_max_hw_sectors(sdev->request_queue,
857 		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
858 		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
859 
860 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
861 		sdev->no_report_opcodes = 1;
862 
863 	/* A few buggy USB-ATA bridges don't understand FUA */
864 	if (devinfo->flags & US_FL_BROKEN_FUA)
865 		sdev->broken_fua = 1;
866 
867 	/* UAS also needs to support FL_ALWAYS_SYNC */
868 	if (devinfo->flags & US_FL_ALWAYS_SYNC) {
869 		sdev->skip_ms_page_3f = 1;
870 		sdev->skip_ms_page_8 = 1;
871 		sdev->wce_default_on = 1;
872 	}
873 
874 	/* Some disks cannot handle READ_CAPACITY_16 */
875 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
876 		sdev->no_read_capacity_16 = 1;
877 
878 	/*
879 	 * Some disks return the total number of blocks in response
880 	 * to READ CAPACITY rather than the highest block number.
881 	 * If this device makes that mistake, tell the sd driver.
882 	 */
883 	if (devinfo->flags & US_FL_FIX_CAPACITY)
884 		sdev->fix_capacity = 1;
885 
886 	/*
887 	 * in some cases we have to guess
888 	 */
889 	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
890 		sdev->guess_capacity = 1;
891 
892 	/*
893 	 * Some devices don't like MODE SENSE with page=0x3f,
894 	 * which is the command used for checking if a device
895 	 * is write-protected.  Now that we tell the sd driver
896 	 * to do a 192-byte transfer with this command the
897 	 * majority of devices work fine, but a few still can't
898 	 * handle it.  The sd driver will simply assume those
899 	 * devices are write-enabled.
900 	 */
901 	if (devinfo->flags & US_FL_NO_WP_DETECT)
902 		sdev->skip_ms_page_3f = 1;
903 
904 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
905 	return 0;
906 }
907 
908 static struct scsi_host_template uas_host_template = {
909 	.module = THIS_MODULE,
910 	.name = "uas",
911 	.queuecommand = uas_queuecommand,
912 	.target_alloc = uas_target_alloc,
913 	.slave_alloc = uas_slave_alloc,
914 	.slave_configure = uas_slave_configure,
915 	.eh_abort_handler = uas_eh_abort_handler,
916 	.eh_device_reset_handler = uas_eh_device_reset_handler,
917 	.this_id = -1,
918 	.skip_settle_delay = 1,
919 	.dma_boundary = PAGE_SIZE - 1,
920 };
921 
922 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
923 		    vendorName, productName, useProtocol, useTransport, \
924 		    initFunction, flags) \
925 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
926 	.driver_info = (flags) }
927 
928 static struct usb_device_id uas_usb_ids[] = {
929 #	include "unusual_uas.h"
930 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
931 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
932 	{ }
933 };
934 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
935 
936 #undef UNUSUAL_DEV
937 
938 static int uas_switch_interface(struct usb_device *udev,
939 				struct usb_interface *intf)
940 {
941 	struct usb_host_interface *alt;
942 
943 	alt = uas_find_uas_alt_setting(intf);
944 	if (!alt)
945 		return -ENODEV;
946 
947 	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
948 			alt->desc.bAlternateSetting);
949 }
950 
951 static int uas_configure_endpoints(struct uas_dev_info *devinfo)
952 {
953 	struct usb_host_endpoint *eps[4] = { };
954 	struct usb_device *udev = devinfo->udev;
955 	int r;
956 
957 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
958 	if (r)
959 		return r;
960 
961 	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
962 					    usb_endpoint_num(&eps[0]->desc));
963 	devinfo->status_pipe = usb_rcvbulkpipe(udev,
964 					    usb_endpoint_num(&eps[1]->desc));
965 	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
966 					    usb_endpoint_num(&eps[2]->desc));
967 	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
968 					    usb_endpoint_num(&eps[3]->desc));
969 
970 	if (udev->speed < USB_SPEED_SUPER) {
971 		devinfo->qdepth = 32;
972 		devinfo->use_streams = 0;
973 	} else {
974 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
975 						    3, MAX_CMNDS, GFP_NOIO);
976 		if (devinfo->qdepth < 0)
977 			return devinfo->qdepth;
978 		devinfo->use_streams = 1;
979 	}
980 
981 	return 0;
982 }
983 
984 static void uas_free_streams(struct uas_dev_info *devinfo)
985 {
986 	struct usb_device *udev = devinfo->udev;
987 	struct usb_host_endpoint *eps[3];
988 
989 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
990 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
991 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
992 	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
993 }
994 
995 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
996 {
997 	int result = -ENOMEM;
998 	struct Scsi_Host *shost = NULL;
999 	struct uas_dev_info *devinfo;
1000 	struct usb_device *udev = interface_to_usbdev(intf);
1001 	unsigned long dev_flags;
1002 
1003 	if (!uas_use_uas_driver(intf, id, &dev_flags))
1004 		return -ENODEV;
1005 
1006 	if (uas_switch_interface(udev, intf))
1007 		return -ENODEV;
1008 
1009 	shost = scsi_host_alloc(&uas_host_template,
1010 				sizeof(struct uas_dev_info));
1011 	if (!shost)
1012 		goto set_alt0;
1013 
1014 	shost->max_cmd_len = 16 + 252;
1015 	shost->max_id = 1;
1016 	shost->max_lun = 256;
1017 	shost->max_channel = 0;
1018 	shost->sg_tablesize = udev->bus->sg_tablesize;
1019 
1020 	devinfo = (struct uas_dev_info *)shost->hostdata;
1021 	devinfo->intf = intf;
1022 	devinfo->udev = udev;
1023 	devinfo->resetting = 0;
1024 	devinfo->shutdown = 0;
1025 	devinfo->flags = dev_flags;
1026 	init_usb_anchor(&devinfo->cmd_urbs);
1027 	init_usb_anchor(&devinfo->sense_urbs);
1028 	init_usb_anchor(&devinfo->data_urbs);
1029 	spin_lock_init(&devinfo->lock);
1030 	INIT_WORK(&devinfo->work, uas_do_work);
1031 	INIT_WORK(&devinfo->scan_work, uas_scan_work);
1032 
1033 	result = uas_configure_endpoints(devinfo);
1034 	if (result)
1035 		goto set_alt0;
1036 
1037 	/*
1038 	 * 1 tag is reserved for untagged commands +
1039 	 * 1 tag to avoid off by one errors in some bridge firmwares
1040 	 */
1041 	shost->can_queue = devinfo->qdepth - 2;
1042 
1043 	usb_set_intfdata(intf, shost);
1044 	result = scsi_add_host_with_dma(shost, &intf->dev, udev->bus->sysdev);
1045 	if (result)
1046 		goto free_streams;
1047 
1048 	/* Submit the delayed_work for SCSI-device scanning */
1049 	schedule_work(&devinfo->scan_work);
1050 
1051 	return result;
1052 
1053 free_streams:
1054 	uas_free_streams(devinfo);
1055 	usb_set_intfdata(intf, NULL);
1056 set_alt0:
1057 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1058 	if (shost)
1059 		scsi_host_put(shost);
1060 	return result;
1061 }
1062 
1063 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1064 {
1065 	unsigned long flags;
1066 	int i, r = 1;
1067 
1068 	spin_lock_irqsave(&devinfo->lock, flags);
1069 
1070 	for (i = 0; i < devinfo->qdepth; i++) {
1071 		if (devinfo->cmnd[i]) {
1072 			r = 0; /* Not empty */
1073 			break;
1074 		}
1075 	}
1076 
1077 	spin_unlock_irqrestore(&devinfo->lock, flags);
1078 
1079 	return r;
1080 }
1081 
1082 /*
1083  * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1084  * get empty while there still is more work to do due to sense-urbs completing
1085  * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1086  */
1087 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1088 {
1089 	unsigned long start_time;
1090 	int r;
1091 
1092 	start_time = jiffies;
1093 	do {
1094 		flush_work(&devinfo->work);
1095 
1096 		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1097 		if (r == 0)
1098 			return -ETIME;
1099 
1100 		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1101 		if (r == 0)
1102 			return -ETIME;
1103 
1104 		if (time_after(jiffies, start_time + 5 * HZ))
1105 			return -ETIME;
1106 	} while (!uas_cmnd_list_empty(devinfo));
1107 
1108 	return 0;
1109 }
1110 
1111 static int uas_pre_reset(struct usb_interface *intf)
1112 {
1113 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1114 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1115 	unsigned long flags;
1116 
1117 	if (devinfo->shutdown)
1118 		return 0;
1119 
1120 	/* Block new requests */
1121 	spin_lock_irqsave(shost->host_lock, flags);
1122 	scsi_block_requests(shost);
1123 	spin_unlock_irqrestore(shost->host_lock, flags);
1124 
1125 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1126 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1127 		scsi_unblock_requests(shost);
1128 		return 1;
1129 	}
1130 
1131 	uas_free_streams(devinfo);
1132 
1133 	return 0;
1134 }
1135 
1136 static int uas_post_reset(struct usb_interface *intf)
1137 {
1138 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1139 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1140 	unsigned long flags;
1141 	int err;
1142 
1143 	if (devinfo->shutdown)
1144 		return 0;
1145 
1146 	err = uas_configure_endpoints(devinfo);
1147 	if (err && err != -ENODEV)
1148 		shost_printk(KERN_ERR, shost,
1149 			     "%s: alloc streams error %d after reset",
1150 			     __func__, err);
1151 
1152 	/* we must unblock the host in every case lest we deadlock */
1153 	spin_lock_irqsave(shost->host_lock, flags);
1154 	scsi_report_bus_reset(shost, 0);
1155 	spin_unlock_irqrestore(shost->host_lock, flags);
1156 
1157 	scsi_unblock_requests(shost);
1158 
1159 	return err ? 1 : 0;
1160 }
1161 
1162 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1163 {
1164 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1165 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1166 
1167 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1168 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1169 		return -ETIME;
1170 	}
1171 
1172 	return 0;
1173 }
1174 
1175 static int uas_resume(struct usb_interface *intf)
1176 {
1177 	return 0;
1178 }
1179 
1180 static int uas_reset_resume(struct usb_interface *intf)
1181 {
1182 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1183 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1184 	unsigned long flags;
1185 	int err;
1186 
1187 	err = uas_configure_endpoints(devinfo);
1188 	if (err) {
1189 		shost_printk(KERN_ERR, shost,
1190 			     "%s: alloc streams error %d after reset",
1191 			     __func__, err);
1192 		return -EIO;
1193 	}
1194 
1195 	spin_lock_irqsave(shost->host_lock, flags);
1196 	scsi_report_bus_reset(shost, 0);
1197 	spin_unlock_irqrestore(shost->host_lock, flags);
1198 
1199 	return 0;
1200 }
1201 
1202 static void uas_disconnect(struct usb_interface *intf)
1203 {
1204 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1205 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1206 	unsigned long flags;
1207 
1208 	spin_lock_irqsave(&devinfo->lock, flags);
1209 	devinfo->resetting = 1;
1210 	spin_unlock_irqrestore(&devinfo->lock, flags);
1211 
1212 	cancel_work_sync(&devinfo->work);
1213 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1214 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
1215 	usb_kill_anchored_urbs(&devinfo->data_urbs);
1216 	uas_zap_pending(devinfo, DID_NO_CONNECT);
1217 
1218 	/*
1219 	 * Prevent SCSI scanning (if it hasn't started yet)
1220 	 * or wait for the SCSI-scanning routine to stop.
1221 	 */
1222 	cancel_work_sync(&devinfo->scan_work);
1223 
1224 	scsi_remove_host(shost);
1225 	uas_free_streams(devinfo);
1226 	scsi_host_put(shost);
1227 }
1228 
1229 /*
1230  * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1231  * hang on reboot when the device is still in uas mode. Note the reset is
1232  * necessary as some devices won't revert to usb-storage mode without it.
1233  */
1234 static void uas_shutdown(struct device *dev)
1235 {
1236 	struct usb_interface *intf = to_usb_interface(dev);
1237 	struct usb_device *udev = interface_to_usbdev(intf);
1238 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1239 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1240 
1241 	if (system_state != SYSTEM_RESTART)
1242 		return;
1243 
1244 	devinfo->shutdown = 1;
1245 	uas_free_streams(devinfo);
1246 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1247 	usb_reset_device(udev);
1248 }
1249 
1250 static struct usb_driver uas_driver = {
1251 	.name = "uas",
1252 	.probe = uas_probe,
1253 	.disconnect = uas_disconnect,
1254 	.pre_reset = uas_pre_reset,
1255 	.post_reset = uas_post_reset,
1256 	.suspend = uas_suspend,
1257 	.resume = uas_resume,
1258 	.reset_resume = uas_reset_resume,
1259 	.drvwrap.driver.shutdown = uas_shutdown,
1260 	.id_table = uas_usb_ids,
1261 };
1262 
1263 static int __init uas_init(void)
1264 {
1265 	int rv;
1266 
1267 	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1268 	if (!workqueue)
1269 		return -ENOMEM;
1270 
1271 	rv = usb_register(&uas_driver);
1272 	if (rv) {
1273 		destroy_workqueue(workqueue);
1274 		return -ENOMEM;
1275 	}
1276 
1277 	return 0;
1278 }
1279 
1280 static void __exit uas_exit(void)
1281 {
1282 	usb_deregister(&uas_driver);
1283 	destroy_workqueue(workqueue);
1284 }
1285 
1286 module_init(uas_init);
1287 module_exit(uas_exit);
1288 
1289 MODULE_LICENSE("GPL");
1290 MODULE_IMPORT_NS(USB_STORAGE);
1291 MODULE_AUTHOR(
1292 	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
1293