1 /* 2 * Ours Technology Inc. OTi-6858 USB to serial adapter driver. 3 * 4 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20) 5 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail) 6 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 7 * Copyright (C) 2003 IBM Corp. 8 * 9 * Many thanks to the authors of pl2303 driver: all functions in this file 10 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy. 11 * 12 * Warning! You use this driver on your own risk! The only official 13 * description of this device I have is datasheet from manufacturer, 14 * and it doesn't contain almost any information needed to write a driver. 15 * Almost all knowlegde used while writing this driver was gathered by: 16 * - analyzing traffic between device and the M$ Windows 2000 driver, 17 * - trying different bit combinations and checking pin states 18 * with a voltmeter, 19 * - receiving malformed frames and producing buffer overflows 20 * to learn how errors are reported, 21 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE 22 * CONNECTED TO IT! 23 * 24 * This program is free software; you can redistribute it and/or modify 25 * it under the terms of the GNU General Public License as published by 26 * the Free Software Foundation; either version 2 of the License. 27 * 28 * See Documentation/usb/usb-serial.txt for more information on using this driver 29 * 30 * TODO: 31 * - implement correct flushing for ioctls and oti6858_close() 32 * - check how errors (rx overflow, parity error, framing error) are reported 33 * - implement oti6858_break_ctl() 34 * - implement more ioctls 35 * - test/implement flow control 36 * - allow setting custom baud rates 37 */ 38 39 #include <linux/kernel.h> 40 #include <linux/errno.h> 41 #include <linux/init.h> 42 #include <linux/slab.h> 43 #include <linux/tty.h> 44 #include <linux/tty_driver.h> 45 #include <linux/tty_flip.h> 46 #include <linux/serial.h> 47 #include <linux/module.h> 48 #include <linux/moduleparam.h> 49 #include <linux/spinlock.h> 50 #include <linux/usb.h> 51 #include <linux/usb/serial.h> 52 #include <asm/uaccess.h> 53 #include "oti6858.h" 54 55 #define OTI6858_DESCRIPTION \ 56 "Ours Technology Inc. OTi-6858 USB to serial adapter driver" 57 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" 58 #define OTI6858_VERSION "0.1" 59 60 static struct usb_device_id id_table [] = { 61 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, 62 { } 63 }; 64 65 MODULE_DEVICE_TABLE(usb, id_table); 66 67 static struct usb_driver oti6858_driver = { 68 .name = "oti6858", 69 .probe = usb_serial_probe, 70 .disconnect = usb_serial_disconnect, 71 .id_table = id_table, 72 .no_dynamic_id = 1, 73 }; 74 75 static int debug; 76 77 78 /* buffering code, copied from pl2303 driver */ 79 #define PL2303_BUF_SIZE 1024 80 #define PL2303_TMP_BUF_SIZE 1024 81 82 struct pl2303_buf { 83 unsigned int buf_size; 84 char *buf_buf; 85 char *buf_get; 86 char *buf_put; 87 }; 88 89 /* requests */ 90 #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) 91 #define OTI6858_REQ_T_GET_STATUS 0x01 92 93 #define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00) 94 #define OTI6858_REQ_T_SET_LINE 0x00 95 96 #define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01) 97 #define OTI6858_REQ_T_CHECK_TXBUFF 0x00 98 99 /* format of the control packet */ 100 struct oti6858_control_pkt { 101 u16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */ 102 #define OTI6858_MAX_BAUD_RATE 3000000 103 u8 frame_fmt; 104 #define FMT_STOP_BITS_MASK 0xc0 105 #define FMT_STOP_BITS_1 0x00 106 #define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */ 107 #define FMT_PARITY_MASK 0x38 108 #define FMT_PARITY_NONE 0x00 109 #define FMT_PARITY_ODD 0x08 110 #define FMT_PARITY_EVEN 0x18 111 #define FMT_PARITY_MARK 0x28 112 #define FMT_PARITY_SPACE 0x38 113 #define FMT_DATA_BITS_MASK 0x03 114 #define FMT_DATA_BITS_5 0x00 115 #define FMT_DATA_BITS_6 0x01 116 #define FMT_DATA_BITS_7 0x02 117 #define FMT_DATA_BITS_8 0x03 118 u8 something; /* always equals 0x43 */ 119 u8 control; /* settings of flow control lines */ 120 #define CONTROL_MASK 0x0c 121 #define CONTROL_DTR_HIGH 0x08 122 #define CONTROL_RTS_HIGH 0x04 123 u8 tx_status; 124 #define TX_BUFFER_EMPTIED 0x09 125 u8 pin_state; 126 #define PIN_MASK 0x3f 127 #define PIN_RTS 0x20 /* output pin */ 128 #define PIN_CTS 0x10 /* input pin, active low */ 129 #define PIN_DSR 0x08 /* input pin, active low */ 130 #define PIN_DTR 0x04 /* output pin */ 131 #define PIN_RI 0x02 /* input pin, active low */ 132 #define PIN_DCD 0x01 /* input pin, active low */ 133 u8 rx_bytes_avail; /* number of bytes in rx buffer */; 134 }; 135 136 #define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt) 137 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \ 138 ( ((a)->divisor == (priv)->pending_setup.divisor) \ 139 && ((a)->control == (priv)->pending_setup.control) \ 140 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) ) 141 142 /* function prototypes */ 143 static int oti6858_open(struct usb_serial_port *port, struct file *filp); 144 static void oti6858_close(struct usb_serial_port *port, struct file *filp); 145 static void oti6858_set_termios(struct usb_serial_port *port, 146 struct ktermios *old); 147 static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, 148 unsigned int cmd, unsigned long arg); 149 static void oti6858_read_int_callback(struct urb *urb); 150 static void oti6858_read_bulk_callback(struct urb *urb); 151 static void oti6858_write_bulk_callback(struct urb *urb); 152 static int oti6858_write(struct usb_serial_port *port, 153 const unsigned char *buf, int count); 154 static int oti6858_write_room(struct usb_serial_port *port); 155 static void oti6858_break_ctl(struct usb_serial_port *port, int break_state); 156 static int oti6858_chars_in_buffer(struct usb_serial_port *port); 157 static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file); 158 static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, 159 unsigned int set, unsigned int clear); 160 static int oti6858_startup(struct usb_serial *serial); 161 static void oti6858_shutdown(struct usb_serial *serial); 162 163 /* functions operating on buffers */ 164 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size); 165 static void pl2303_buf_free(struct pl2303_buf *pb); 166 static void pl2303_buf_clear(struct pl2303_buf *pb); 167 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb); 168 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb); 169 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, 170 unsigned int count); 171 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, 172 unsigned int count); 173 174 175 /* device info */ 176 static struct usb_serial_driver oti6858_device = { 177 .driver = { 178 .owner = THIS_MODULE, 179 .name = "oti6858", 180 }, 181 .id_table = id_table, 182 .num_interrupt_in = 1, 183 .num_bulk_in = 1, 184 .num_bulk_out = 1, 185 .num_ports = 1, 186 .open = oti6858_open, 187 .close = oti6858_close, 188 .write = oti6858_write, 189 .ioctl = oti6858_ioctl, 190 .break_ctl = oti6858_break_ctl, 191 .set_termios = oti6858_set_termios, 192 .tiocmget = oti6858_tiocmget, 193 .tiocmset = oti6858_tiocmset, 194 .read_bulk_callback = oti6858_read_bulk_callback, 195 .read_int_callback = oti6858_read_int_callback, 196 .write_bulk_callback = oti6858_write_bulk_callback, 197 .write_room = oti6858_write_room, 198 .chars_in_buffer = oti6858_chars_in_buffer, 199 .attach = oti6858_startup, 200 .shutdown = oti6858_shutdown, 201 }; 202 203 struct oti6858_private { 204 spinlock_t lock; 205 206 struct pl2303_buf *buf; 207 struct oti6858_control_pkt status; 208 209 struct { 210 u8 read_urb_in_use; 211 u8 write_urb_in_use; 212 u8 termios_initialized; 213 } flags; 214 struct delayed_work delayed_write_work; 215 216 struct { 217 u16 divisor; 218 u8 frame_fmt; 219 u8 control; 220 } pending_setup; 221 u8 transient; 222 u8 setup_done; 223 struct delayed_work delayed_setup_work; 224 225 wait_queue_head_t intr_wait; 226 struct usb_serial_port *port; /* USB port with which associated */ 227 }; 228 229 #undef dbg 230 /* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */ 231 #define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg) 232 233 static void setup_line(struct work_struct *work) 234 { 235 struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work); 236 struct usb_serial_port *port = priv->port; 237 struct oti6858_control_pkt *new_setup; 238 unsigned long flags; 239 int result; 240 241 dbg("%s(port = %d)", __FUNCTION__, port->number); 242 243 if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { 244 dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__); 245 /* we will try again */ 246 schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); 247 return; 248 } 249 250 result = usb_control_msg(port->serial->dev, 251 usb_rcvctrlpipe(port->serial->dev, 0), 252 OTI6858_REQ_T_GET_STATUS, 253 OTI6858_REQ_GET_STATUS, 254 0, 0, 255 new_setup, OTI6858_CTRL_PKT_SIZE, 256 100); 257 258 if (result != OTI6858_CTRL_PKT_SIZE) { 259 dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__); 260 kfree(new_setup); 261 /* we will try again */ 262 schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); 263 return; 264 } 265 266 spin_lock_irqsave(&priv->lock, flags); 267 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) { 268 new_setup->divisor = priv->pending_setup.divisor; 269 new_setup->control = priv->pending_setup.control; 270 new_setup->frame_fmt = priv->pending_setup.frame_fmt; 271 272 spin_unlock_irqrestore(&priv->lock, flags); 273 result = usb_control_msg(port->serial->dev, 274 usb_sndctrlpipe(port->serial->dev, 0), 275 OTI6858_REQ_T_SET_LINE, 276 OTI6858_REQ_SET_LINE, 277 0, 0, 278 new_setup, OTI6858_CTRL_PKT_SIZE, 279 100); 280 } else { 281 spin_unlock_irqrestore(&priv->lock, flags); 282 result = 0; 283 } 284 kfree(new_setup); 285 286 spin_lock_irqsave(&priv->lock, flags); 287 if (result != OTI6858_CTRL_PKT_SIZE) 288 priv->transient = 0; 289 priv->setup_done = 1; 290 spin_unlock_irqrestore(&priv->lock, flags); 291 292 dbg("%s(): submitting interrupt urb", __FUNCTION__); 293 port->interrupt_in_urb->dev = port->serial->dev; 294 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 295 if (result != 0) { 296 dev_err(&port->dev, "%s(): usb_submit_urb() failed" 297 " with error %d\n", __FUNCTION__, result); 298 } 299 } 300 301 void send_data(struct work_struct *work) 302 { 303 struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work); 304 struct usb_serial_port *port = priv->port; 305 int count = 0, result; 306 unsigned long flags; 307 unsigned char allow; 308 309 dbg("%s(port = %d)", __FUNCTION__, port->number); 310 311 spin_lock_irqsave(&priv->lock, flags); 312 if (priv->flags.write_urb_in_use) { 313 spin_unlock_irqrestore(&priv->lock, flags); 314 schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2)); 315 return; 316 } 317 priv->flags.write_urb_in_use = 1; 318 319 count = pl2303_buf_data_avail(priv->buf); 320 spin_unlock_irqrestore(&priv->lock, flags); 321 if (count > port->bulk_out_size) 322 count = port->bulk_out_size; 323 324 if (count != 0) { 325 result = usb_control_msg(port->serial->dev, 326 usb_rcvctrlpipe(port->serial->dev, 0), 327 OTI6858_REQ_T_CHECK_TXBUFF, 328 OTI6858_REQ_CHECK_TXBUFF, 329 count, 0, &allow, 1, 100); 330 if (result != 1 || allow != 0) 331 count = 0; 332 } 333 334 if (count == 0) { 335 priv->flags.write_urb_in_use = 0; 336 337 dbg("%s(): submitting interrupt urb", __FUNCTION__); 338 port->interrupt_in_urb->dev = port->serial->dev; 339 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 340 if (result != 0) { 341 dev_err(&port->dev, "%s(): usb_submit_urb() failed" 342 " with error %d\n", __FUNCTION__, result); 343 } 344 return; 345 } 346 347 spin_lock_irqsave(&priv->lock, flags); 348 pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer, count); 349 spin_unlock_irqrestore(&priv->lock, flags); 350 351 port->write_urb->transfer_buffer_length = count; 352 port->write_urb->dev = port->serial->dev; 353 result = usb_submit_urb(port->write_urb, GFP_ATOMIC); 354 if (result != 0) { 355 dev_err(&port->dev, "%s(): usb_submit_urb() failed" 356 " with error %d\n", __FUNCTION__, result); 357 priv->flags.write_urb_in_use = 0; 358 } 359 360 usb_serial_port_softint(port); 361 } 362 363 static int oti6858_startup(struct usb_serial *serial) 364 { 365 struct usb_serial_port *port = serial->port[0]; 366 struct oti6858_private *priv; 367 int i; 368 369 for (i = 0; i < serial->num_ports; ++i) { 370 priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL); 371 if (!priv) 372 break; 373 priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE); 374 if (priv->buf == NULL) { 375 kfree(priv); 376 break; 377 } 378 379 spin_lock_init(&priv->lock); 380 init_waitqueue_head(&priv->intr_wait); 381 // INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); 382 // INIT_WORK(&priv->write_work, send_data, serial->port[i]); 383 priv->port = port; 384 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); 385 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); 386 387 usb_set_serial_port_data(serial->port[i], priv); 388 } 389 if (i == serial->num_ports) 390 return 0; 391 392 for (--i; i >= 0; --i) { 393 priv = usb_get_serial_port_data(serial->port[i]); 394 pl2303_buf_free(priv->buf); 395 kfree(priv); 396 usb_set_serial_port_data(serial->port[i], NULL); 397 } 398 return -ENOMEM; 399 } 400 401 static int oti6858_write(struct usb_serial_port *port, 402 const unsigned char *buf, int count) 403 { 404 struct oti6858_private *priv = usb_get_serial_port_data(port); 405 unsigned long flags; 406 407 dbg("%s(port = %d, count = %d)", __FUNCTION__, port->number, count); 408 409 if (!count) 410 return count; 411 412 spin_lock_irqsave(&priv->lock, flags); 413 count = pl2303_buf_put(priv->buf, buf, count); 414 spin_unlock_irqrestore(&priv->lock, flags); 415 416 return count; 417 } 418 419 static int oti6858_write_room(struct usb_serial_port *port) 420 { 421 struct oti6858_private *priv = usb_get_serial_port_data(port); 422 int room = 0; 423 unsigned long flags; 424 425 dbg("%s(port = %d)", __FUNCTION__, port->number); 426 427 spin_lock_irqsave(&priv->lock, flags); 428 room = pl2303_buf_space_avail(priv->buf); 429 spin_unlock_irqrestore(&priv->lock, flags); 430 431 return room; 432 } 433 434 static int oti6858_chars_in_buffer(struct usb_serial_port *port) 435 { 436 struct oti6858_private *priv = usb_get_serial_port_data(port); 437 int chars = 0; 438 unsigned long flags; 439 440 dbg("%s(port = %d)", __FUNCTION__, port->number); 441 442 spin_lock_irqsave(&priv->lock, flags); 443 chars = pl2303_buf_data_avail(priv->buf); 444 spin_unlock_irqrestore(&priv->lock, flags); 445 446 return chars; 447 } 448 449 static void oti6858_set_termios(struct usb_serial_port *port, 450 struct ktermios *old_termios) 451 { 452 struct oti6858_private *priv = usb_get_serial_port_data(port); 453 unsigned long flags; 454 unsigned int cflag; 455 u8 frame_fmt, control; 456 u16 divisor; 457 int br; 458 459 dbg("%s(port = %d)", __FUNCTION__, port->number); 460 461 if ((!port->tty) || (!port->tty->termios)) { 462 dbg("%s(): no tty structures", __FUNCTION__); 463 return; 464 } 465 466 spin_lock_irqsave(&priv->lock, flags); 467 if (!priv->flags.termios_initialized) { 468 *(port->tty->termios) = tty_std_termios; 469 port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; 470 priv->flags.termios_initialized = 1; 471 } 472 spin_unlock_irqrestore(&priv->lock, flags); 473 474 cflag = port->tty->termios->c_cflag; 475 476 spin_lock_irqsave(&priv->lock, flags); 477 divisor = priv->pending_setup.divisor; 478 frame_fmt = priv->pending_setup.frame_fmt; 479 control = priv->pending_setup.control; 480 spin_unlock_irqrestore(&priv->lock, flags); 481 482 frame_fmt &= ~FMT_DATA_BITS_MASK; 483 switch (cflag & CSIZE) { 484 case CS5: 485 frame_fmt |= FMT_DATA_BITS_5; 486 break; 487 case CS6: 488 frame_fmt |= FMT_DATA_BITS_6; 489 break; 490 case CS7: 491 frame_fmt |= FMT_DATA_BITS_7; 492 break; 493 default: 494 case CS8: 495 frame_fmt |= FMT_DATA_BITS_8; 496 break; 497 } 498 499 /* manufacturer claims that this device can work with baud rates 500 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't 501 * guarantee that any other baud rate will work (especially 502 * the higher ones) 503 */ 504 br = tty_get_baud_rate(port->tty); 505 if (br == 0) { 506 divisor = 0; 507 } else if (br <= OTI6858_MAX_BAUD_RATE) { 508 int real_br; 509 510 divisor = (96000000 + 8 * br) / (16 * br); 511 real_br = 96000000 / (16 * divisor); 512 if ((((real_br - br) * 100 + br - 1) / br) > 2) { 513 dbg("%s(): baud rate %d is invalid", __FUNCTION__, br); 514 return; 515 } 516 divisor = cpu_to_le16(divisor); 517 } else { 518 dbg("%s(): baud rate %d is too high", __FUNCTION__, br); 519 return; 520 } 521 522 frame_fmt &= ~FMT_STOP_BITS_MASK; 523 if ((cflag & CSTOPB) != 0) { 524 frame_fmt |= FMT_STOP_BITS_2; 525 } else { 526 frame_fmt |= FMT_STOP_BITS_1; 527 } 528 529 frame_fmt &= ~FMT_PARITY_MASK; 530 if ((cflag & PARENB) != 0) { 531 if ((cflag & PARODD) != 0) { 532 frame_fmt |= FMT_PARITY_ODD; 533 } else { 534 frame_fmt |= FMT_PARITY_EVEN; 535 } 536 } else { 537 frame_fmt |= FMT_PARITY_NONE; 538 } 539 540 control &= ~CONTROL_MASK; 541 if ((cflag & CRTSCTS) != 0) 542 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH); 543 544 /* change control lines if we are switching to or from B0 */ 545 /* FIXME: 546 spin_lock_irqsave(&priv->lock, flags); 547 control = priv->line_control; 548 if ((cflag & CBAUD) == B0) 549 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); 550 else 551 priv->line_control |= (CONTROL_DTR | CONTROL_RTS); 552 if (control != priv->line_control) { 553 control = priv->line_control; 554 spin_unlock_irqrestore(&priv->lock, flags); 555 set_control_lines(serial->dev, control); 556 } else { 557 spin_unlock_irqrestore(&priv->lock, flags); 558 } 559 */ 560 561 spin_lock_irqsave(&priv->lock, flags); 562 if (divisor != priv->pending_setup.divisor 563 || control != priv->pending_setup.control 564 || frame_fmt != priv->pending_setup.frame_fmt) { 565 priv->pending_setup.divisor = divisor; 566 priv->pending_setup.control = control; 567 priv->pending_setup.frame_fmt = frame_fmt; 568 } 569 spin_unlock_irqrestore(&priv->lock, flags); 570 } 571 572 static int oti6858_open(struct usb_serial_port *port, struct file *filp) 573 { 574 struct oti6858_private *priv = usb_get_serial_port_data(port); 575 struct ktermios tmp_termios; 576 struct usb_serial *serial = port->serial; 577 struct oti6858_control_pkt *buf; 578 unsigned long flags; 579 int result; 580 581 dbg("%s(port = %d)", __FUNCTION__, port->number); 582 583 usb_clear_halt(serial->dev, port->write_urb->pipe); 584 usb_clear_halt(serial->dev, port->read_urb->pipe); 585 586 if (port->open_count != 1) 587 return 0; 588 589 if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { 590 dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__); 591 return -ENOMEM; 592 } 593 594 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 595 OTI6858_REQ_T_GET_STATUS, 596 OTI6858_REQ_GET_STATUS, 597 0, 0, 598 buf, OTI6858_CTRL_PKT_SIZE, 599 100); 600 if (result != OTI6858_CTRL_PKT_SIZE) { 601 /* assume default (after power-on reset) values */ 602 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */ 603 buf->frame_fmt = 0x03; /* 8N1 */ 604 buf->something = 0x43; 605 buf->control = 0x4c; /* DTR, RTS */ 606 buf->tx_status = 0x00; 607 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */ 608 buf->rx_bytes_avail = 0x00; 609 } 610 611 spin_lock_irqsave(&priv->lock, flags); 612 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE); 613 priv->pending_setup.divisor = buf->divisor; 614 priv->pending_setup.frame_fmt = buf->frame_fmt; 615 priv->pending_setup.control = buf->control; 616 spin_unlock_irqrestore(&priv->lock, flags); 617 kfree(buf); 618 619 dbg("%s(): submitting interrupt urb", __FUNCTION__); 620 port->interrupt_in_urb->dev = serial->dev; 621 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 622 if (result != 0) { 623 dev_err(&port->dev, "%s(): usb_submit_urb() failed" 624 " with error %d\n", __FUNCTION__, result); 625 oti6858_close(port, NULL); 626 return -EPROTO; 627 } 628 629 /* setup termios */ 630 if (port->tty) 631 oti6858_set_termios(port, &tmp_termios); 632 633 return 0; 634 } 635 636 static void oti6858_close(struct usb_serial_port *port, struct file *filp) 637 { 638 struct oti6858_private *priv = usb_get_serial_port_data(port); 639 unsigned long flags; 640 long timeout; 641 wait_queue_t wait; 642 643 dbg("%s(port = %d)", __FUNCTION__, port->number); 644 645 /* wait for data to drain from the buffer */ 646 spin_lock_irqsave(&priv->lock, flags); 647 timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ 648 init_waitqueue_entry(&wait, current); 649 add_wait_queue(&port->tty->write_wait, &wait); 650 dbg("%s(): entering wait loop", __FUNCTION__); 651 for (;;) { 652 set_current_state(TASK_INTERRUPTIBLE); 653 if (pl2303_buf_data_avail(priv->buf) == 0 654 || timeout == 0 || signal_pending(current) 655 || !usb_get_intfdata(port->serial->interface)) /* disconnect */ 656 break; 657 spin_unlock_irqrestore(&priv->lock, flags); 658 timeout = schedule_timeout(timeout); 659 spin_lock_irqsave(&priv->lock, flags); 660 } 661 set_current_state(TASK_RUNNING); 662 remove_wait_queue(&port->tty->write_wait, &wait); 663 dbg("%s(): after wait loop", __FUNCTION__); 664 665 /* clear out any remaining data in the buffer */ 666 pl2303_buf_clear(priv->buf); 667 spin_unlock_irqrestore(&priv->lock, flags); 668 669 /* wait for characters to drain from the device */ 670 /* (this is long enough for the entire 256 byte */ 671 /* pl2303 hardware buffer to drain with no flow */ 672 /* control for data rates of 1200 bps or more, */ 673 /* for lower rates we should really know how much */ 674 /* data is in the buffer to compute a delay */ 675 /* that is not unnecessarily long) */ 676 /* FIXME 677 bps = tty_get_baud_rate(port->tty); 678 if (bps > 1200) 679 timeout = max((HZ*2560)/bps,HZ/10); 680 else 681 */ 682 timeout = 2*HZ; 683 schedule_timeout_interruptible(timeout); 684 dbg("%s(): after schedule_timeout_interruptible()", __FUNCTION__); 685 686 /* cancel scheduled setup */ 687 cancel_delayed_work(&priv->delayed_setup_work); 688 cancel_delayed_work(&priv->delayed_write_work); 689 flush_scheduled_work(); 690 691 /* shutdown our urbs */ 692 dbg("%s(): shutting down urbs", __FUNCTION__); 693 usb_kill_urb(port->write_urb); 694 usb_kill_urb(port->read_urb); 695 usb_kill_urb(port->interrupt_in_urb); 696 697 /* 698 if (port->tty && (port->tty->termios->c_cflag) & HUPCL) { 699 // drop DTR and RTS 700 spin_lock_irqsave(&priv->lock, flags); 701 priv->pending_setup.control &= ~CONTROL_MASK; 702 spin_unlock_irqrestore(&priv->lock, flags); 703 } 704 */ 705 } 706 707 static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, 708 unsigned int set, unsigned int clear) 709 { 710 struct oti6858_private *priv = usb_get_serial_port_data(port); 711 unsigned long flags; 712 u8 control; 713 714 dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)", 715 __FUNCTION__, port->number, set, clear); 716 717 if (!usb_get_intfdata(port->serial->interface)) 718 return -ENODEV; 719 720 /* FIXME: check if this is correct (active high/low) */ 721 spin_lock_irqsave(&priv->lock, flags); 722 control = priv->pending_setup.control; 723 if ((set & TIOCM_RTS) != 0) 724 control |= CONTROL_RTS_HIGH; 725 if ((set & TIOCM_DTR) != 0) 726 control |= CONTROL_DTR_HIGH; 727 if ((clear & TIOCM_RTS) != 0) 728 control &= ~CONTROL_RTS_HIGH; 729 if ((clear & TIOCM_DTR) != 0) 730 control &= ~CONTROL_DTR_HIGH; 731 732 if (control != priv->pending_setup.control) { 733 priv->pending_setup.control = control; 734 } 735 spin_unlock_irqrestore(&priv->lock, flags); 736 737 return 0; 738 } 739 740 static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file) 741 { 742 struct oti6858_private *priv = usb_get_serial_port_data(port); 743 unsigned long flags; 744 unsigned pin_state; 745 unsigned result = 0; 746 747 dbg("%s(port = %d)", __FUNCTION__, port->number); 748 749 if (!usb_get_intfdata(port->serial->interface)) 750 return -ENODEV; 751 752 spin_lock_irqsave(&priv->lock, flags); 753 pin_state = priv->status.pin_state & PIN_MASK; 754 spin_unlock_irqrestore(&priv->lock, flags); 755 756 /* FIXME: check if this is correct (active high/low) */ 757 if ((pin_state & PIN_RTS) != 0) 758 result |= TIOCM_RTS; 759 if ((pin_state & PIN_CTS) != 0) 760 result |= TIOCM_CTS; 761 if ((pin_state & PIN_DSR) != 0) 762 result |= TIOCM_DSR; 763 if ((pin_state & PIN_DTR) != 0) 764 result |= TIOCM_DTR; 765 if ((pin_state & PIN_RI) != 0) 766 result |= TIOCM_RI; 767 if ((pin_state & PIN_DCD) != 0) 768 result |= TIOCM_CD; 769 770 dbg("%s() = 0x%08x", __FUNCTION__, result); 771 772 return result; 773 } 774 775 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) 776 { 777 struct oti6858_private *priv = usb_get_serial_port_data(port); 778 unsigned long flags; 779 unsigned int prev, status; 780 unsigned int changed; 781 782 spin_lock_irqsave(&priv->lock, flags); 783 prev = priv->status.pin_state; 784 spin_unlock_irqrestore(&priv->lock, flags); 785 786 while (1) { 787 wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev); 788 if (signal_pending(current)) 789 return -ERESTARTSYS; 790 791 spin_lock_irqsave(&priv->lock, flags); 792 status = priv->status.pin_state & PIN_MASK; 793 spin_unlock_irqrestore(&priv->lock, flags); 794 795 changed = prev ^ status; 796 /* FIXME: check if this is correct (active high/low) */ 797 if ( ((arg & TIOCM_RNG) && (changed & PIN_RI)) || 798 ((arg & TIOCM_DSR) && (changed & PIN_DSR)) || 799 ((arg & TIOCM_CD) && (changed & PIN_DCD)) || 800 ((arg & TIOCM_CTS) && (changed & PIN_CTS))) { 801 return 0; 802 } 803 prev = status; 804 } 805 806 /* NOTREACHED */ 807 return 0; 808 } 809 810 static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, 811 unsigned int cmd, unsigned long arg) 812 { 813 void __user *user_arg = (void __user *) arg; 814 unsigned int x; 815 816 dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)", 817 __FUNCTION__, port->number, cmd, arg); 818 819 switch (cmd) { 820 case TCFLSH: 821 /* FIXME */ 822 return 0; 823 824 case TIOCMBIS: 825 if (copy_from_user(&x, user_arg, sizeof(x))) 826 return -EFAULT; 827 return oti6858_tiocmset(port, NULL, x, 0); 828 829 case TIOCMBIC: 830 if (copy_from_user(&x, user_arg, sizeof(x))) 831 return -EFAULT; 832 return oti6858_tiocmset(port, NULL, 0, x); 833 834 case TIOCGSERIAL: 835 if (copy_to_user(user_arg, port->tty->termios, 836 sizeof(struct ktermios))) { 837 return -EFAULT; 838 } 839 return 0; 840 841 case TIOCSSERIAL: 842 if (copy_from_user(port->tty->termios, user_arg, 843 sizeof(struct ktermios))) { 844 return -EFAULT; 845 } 846 oti6858_set_termios(port, NULL); 847 return 0; 848 849 case TIOCMIWAIT: 850 dbg("%s(): TIOCMIWAIT", __FUNCTION__); 851 return wait_modem_info(port, arg); 852 853 default: 854 dbg("%s(): 0x%04x not supported", __FUNCTION__, cmd); 855 break; 856 } 857 858 return -ENOIOCTLCMD; 859 } 860 861 static void oti6858_break_ctl(struct usb_serial_port *port, int break_state) 862 { 863 int state; 864 865 dbg("%s(port = %d)", __FUNCTION__, port->number); 866 867 state = (break_state == 0) ? 0 : 1; 868 dbg("%s(): turning break %s", __FUNCTION__, state ? "on" : "off"); 869 870 /* FIXME */ 871 /* 872 result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), 873 BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 874 0, NULL, 0, 100); 875 if (result != 0) 876 dbg("%s(): error sending break", __FUNCTION__); 877 */ 878 } 879 880 static void oti6858_shutdown(struct usb_serial *serial) 881 { 882 struct oti6858_private *priv; 883 int i; 884 885 dbg("%s()", __FUNCTION__); 886 887 for (i = 0; i < serial->num_ports; ++i) { 888 priv = usb_get_serial_port_data(serial->port[i]); 889 if (priv) { 890 pl2303_buf_free(priv->buf); 891 kfree(priv); 892 usb_set_serial_port_data(serial->port[i], NULL); 893 } 894 } 895 } 896 897 static void oti6858_read_int_callback(struct urb *urb) 898 { 899 struct usb_serial_port *port = (struct usb_serial_port *) urb->context; 900 struct oti6858_private *priv = usb_get_serial_port_data(port); 901 int transient = 0, can_recv = 0, resubmit = 1; 902 int status = urb->status; 903 904 dbg("%s(port = %d, status = %d)", 905 __FUNCTION__, port->number, status); 906 907 switch (status) { 908 case 0: 909 /* success */ 910 break; 911 case -ECONNRESET: 912 case -ENOENT: 913 case -ESHUTDOWN: 914 /* this urb is terminated, clean up */ 915 dbg("%s(): urb shutting down with status: %d", 916 __FUNCTION__, status); 917 return; 918 default: 919 dbg("%s(): nonzero urb status received: %d", 920 __FUNCTION__, status); 921 break; 922 } 923 924 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) { 925 struct oti6858_control_pkt *xs = urb->transfer_buffer; 926 unsigned long flags; 927 928 spin_lock_irqsave(&priv->lock, flags); 929 930 if (!priv->transient) { 931 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 932 if (xs->rx_bytes_avail == 0) { 933 priv->transient = 4; 934 priv->setup_done = 0; 935 resubmit = 0; 936 dbg("%s(): scheduling setup_line()", 937 __FUNCTION__); 938 schedule_delayed_work(&priv->delayed_setup_work, 0); 939 } 940 } 941 } else { 942 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 943 priv->transient = 0; 944 } else if (!priv->setup_done) { 945 resubmit = 0; 946 } else if (--priv->transient == 0) { 947 if (xs->rx_bytes_avail == 0) { 948 priv->transient = 4; 949 priv->setup_done = 0; 950 resubmit = 0; 951 dbg("%s(): scheduling setup_line()", 952 __FUNCTION__); 953 schedule_delayed_work(&priv->delayed_setup_work, 0); 954 } 955 } 956 } 957 958 if (!priv->transient) { 959 if (xs->pin_state != priv->status.pin_state) 960 wake_up_interruptible(&priv->intr_wait); 961 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); 962 } 963 964 if (!priv->transient && xs->rx_bytes_avail != 0) { 965 can_recv = xs->rx_bytes_avail; 966 priv->flags.read_urb_in_use = 1; 967 } 968 969 transient = priv->transient; 970 spin_unlock_irqrestore(&priv->lock, flags); 971 } 972 973 if (can_recv) { 974 int result; 975 976 port->read_urb->dev = port->serial->dev; 977 result = usb_submit_urb(port->read_urb, GFP_ATOMIC); 978 if (result != 0) { 979 priv->flags.read_urb_in_use = 0; 980 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 981 " error %d\n", __FUNCTION__, result); 982 } else { 983 resubmit = 0; 984 } 985 } else if (!transient) { 986 unsigned long flags; 987 988 spin_lock_irqsave(&priv->lock, flags); 989 if (priv->flags.write_urb_in_use == 0 990 && pl2303_buf_data_avail(priv->buf) != 0) { 991 schedule_delayed_work(&priv->delayed_write_work,0); 992 resubmit = 0; 993 } 994 spin_unlock_irqrestore(&priv->lock, flags); 995 } 996 997 if (resubmit) { 998 int result; 999 1000 // dbg("%s(): submitting interrupt urb", __FUNCTION__); 1001 urb->dev = port->serial->dev; 1002 result = usb_submit_urb(urb, GFP_ATOMIC); 1003 if (result != 0) { 1004 dev_err(&urb->dev->dev, 1005 "%s(): usb_submit_urb() failed with" 1006 " error %d\n", __FUNCTION__, result); 1007 } 1008 } 1009 } 1010 1011 static void oti6858_read_bulk_callback(struct urb *urb) 1012 { 1013 struct usb_serial_port *port = (struct usb_serial_port *) urb->context; 1014 struct oti6858_private *priv = usb_get_serial_port_data(port); 1015 struct tty_struct *tty; 1016 unsigned char *data = urb->transfer_buffer; 1017 unsigned long flags; 1018 int i, result; 1019 int status = urb->status; 1020 char tty_flag; 1021 1022 dbg("%s(port = %d, status = %d)", 1023 __FUNCTION__, port->number, status); 1024 1025 spin_lock_irqsave(&priv->lock, flags); 1026 priv->flags.read_urb_in_use = 0; 1027 spin_unlock_irqrestore(&priv->lock, flags); 1028 1029 if (status != 0) { 1030 if (!port->open_count) { 1031 dbg("%s(): port is closed, exiting", __FUNCTION__); 1032 return; 1033 } 1034 /* 1035 if (status == -EPROTO) { 1036 // PL2303 mysteriously fails with -EPROTO reschedule the read 1037 dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); 1038 result = usb_submit_urb(urb, GFP_ATOMIC); 1039 if (result) 1040 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); 1041 return; 1042 } 1043 */ 1044 dbg("%s(): unable to handle the error, exiting", __FUNCTION__); 1045 return; 1046 } 1047 1048 // get tty_flag from status 1049 tty_flag = TTY_NORMAL; 1050 1051 /* FIXME: probably, errors will be signalled using interrupt pipe! */ 1052 /* 1053 // break takes precedence over parity, 1054 // which takes precedence over framing errors 1055 if (status & UART_BREAK_ERROR ) 1056 tty_flag = TTY_BREAK; 1057 else if (status & UART_PARITY_ERROR) 1058 tty_flag = TTY_PARITY; 1059 else if (status & UART_FRAME_ERROR) 1060 tty_flag = TTY_FRAME; 1061 dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag); 1062 */ 1063 1064 tty = port->tty; 1065 if (tty != NULL && urb->actual_length > 0) { 1066 tty_buffer_request_room(tty, urb->actual_length); 1067 for (i = 0; i < urb->actual_length; ++i) 1068 tty_insert_flip_char(tty, data[i], tty_flag); 1069 tty_flip_buffer_push(tty); 1070 } 1071 1072 // schedule the interrupt urb if we are still open */ 1073 if (port->open_count != 0) { 1074 port->interrupt_in_urb->dev = port->serial->dev; 1075 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 1076 if (result != 0) { 1077 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 1078 " error %d\n", __FUNCTION__, result); 1079 } 1080 } 1081 } 1082 1083 static void oti6858_write_bulk_callback(struct urb *urb) 1084 { 1085 struct usb_serial_port *port = (struct usb_serial_port *) urb->context; 1086 struct oti6858_private *priv = usb_get_serial_port_data(port); 1087 int status = urb->status; 1088 int result; 1089 1090 dbg("%s(port = %d, status = %d)", 1091 __FUNCTION__, port->number, status); 1092 1093 switch (status) { 1094 case 0: 1095 /* success */ 1096 break; 1097 case -ECONNRESET: 1098 case -ENOENT: 1099 case -ESHUTDOWN: 1100 /* this urb is terminated, clean up */ 1101 dbg("%s(): urb shutting down with status: %d", 1102 __FUNCTION__, status); 1103 priv->flags.write_urb_in_use = 0; 1104 return; 1105 default: 1106 /* error in the urb, so we have to resubmit it */ 1107 dbg("%s(): nonzero write bulk status received: %d", 1108 __FUNCTION__, status); 1109 dbg("%s(): overflow in write", __FUNCTION__); 1110 1111 port->write_urb->transfer_buffer_length = 1; 1112 port->write_urb->dev = port->serial->dev; 1113 result = usb_submit_urb(port->write_urb, GFP_ATOMIC); 1114 if (result) { 1115 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 1116 " error %d\n", __FUNCTION__, result); 1117 } else { 1118 return; 1119 } 1120 } 1121 1122 priv->flags.write_urb_in_use = 0; 1123 1124 // schedule the interrupt urb if we are still open */ 1125 port->interrupt_in_urb->dev = port->serial->dev; 1126 dbg("%s(): submitting interrupt urb", __FUNCTION__); 1127 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 1128 if (result != 0) { 1129 dev_err(&port->dev, "%s(): failed submitting int urb," 1130 " error %d\n", __FUNCTION__, result); 1131 } 1132 } 1133 1134 1135 /* 1136 * pl2303_buf_alloc 1137 * 1138 * Allocate a circular buffer and all associated memory. 1139 */ 1140 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) 1141 { 1142 struct pl2303_buf *pb; 1143 1144 if (size == 0) 1145 return NULL; 1146 1147 pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); 1148 if (pb == NULL) 1149 return NULL; 1150 1151 pb->buf_buf = kmalloc(size, GFP_KERNEL); 1152 if (pb->buf_buf == NULL) { 1153 kfree(pb); 1154 return NULL; 1155 } 1156 1157 pb->buf_size = size; 1158 pb->buf_get = pb->buf_put = pb->buf_buf; 1159 1160 return pb; 1161 } 1162 1163 /* 1164 * pl2303_buf_free 1165 * 1166 * Free the buffer and all associated memory. 1167 */ 1168 static void pl2303_buf_free(struct pl2303_buf *pb) 1169 { 1170 if (pb) { 1171 kfree(pb->buf_buf); 1172 kfree(pb); 1173 } 1174 } 1175 1176 /* 1177 * pl2303_buf_clear 1178 * 1179 * Clear out all data in the circular buffer. 1180 */ 1181 static void pl2303_buf_clear(struct pl2303_buf *pb) 1182 { 1183 if (pb != NULL) { 1184 /* equivalent to a get of all data available */ 1185 pb->buf_get = pb->buf_put; 1186 } 1187 } 1188 1189 /* 1190 * pl2303_buf_data_avail 1191 * 1192 * Return the number of bytes of data available in the circular 1193 * buffer. 1194 */ 1195 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) 1196 { 1197 if (pb == NULL) 1198 return 0; 1199 return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); 1200 } 1201 1202 /* 1203 * pl2303_buf_space_avail 1204 * 1205 * Return the number of bytes of space available in the circular 1206 * buffer. 1207 */ 1208 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) 1209 { 1210 if (pb == NULL) 1211 return 0; 1212 return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); 1213 } 1214 1215 /* 1216 * pl2303_buf_put 1217 * 1218 * Copy data data from a user buffer and put it into the circular buffer. 1219 * Restrict to the amount of space available. 1220 * 1221 * Return the number of bytes copied. 1222 */ 1223 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, 1224 unsigned int count) 1225 { 1226 unsigned int len; 1227 1228 if (pb == NULL) 1229 return 0; 1230 1231 len = pl2303_buf_space_avail(pb); 1232 if (count > len) 1233 count = len; 1234 1235 if (count == 0) 1236 return 0; 1237 1238 len = pb->buf_buf + pb->buf_size - pb->buf_put; 1239 if (count > len) { 1240 memcpy(pb->buf_put, buf, len); 1241 memcpy(pb->buf_buf, buf+len, count - len); 1242 pb->buf_put = pb->buf_buf + count - len; 1243 } else { 1244 memcpy(pb->buf_put, buf, count); 1245 if (count < len) 1246 pb->buf_put += count; 1247 else /* count == len */ 1248 pb->buf_put = pb->buf_buf; 1249 } 1250 1251 return count; 1252 } 1253 1254 /* 1255 * pl2303_buf_get 1256 * 1257 * Get data from the circular buffer and copy to the given buffer. 1258 * Restrict to the amount of data available. 1259 * 1260 * Return the number of bytes copied. 1261 */ 1262 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, 1263 unsigned int count) 1264 { 1265 unsigned int len; 1266 1267 if (pb == NULL) 1268 return 0; 1269 1270 len = pl2303_buf_data_avail(pb); 1271 if (count > len) 1272 count = len; 1273 1274 if (count == 0) 1275 return 0; 1276 1277 len = pb->buf_buf + pb->buf_size - pb->buf_get; 1278 if (count > len) { 1279 memcpy(buf, pb->buf_get, len); 1280 memcpy(buf+len, pb->buf_buf, count - len); 1281 pb->buf_get = pb->buf_buf + count - len; 1282 } else { 1283 memcpy(buf, pb->buf_get, count); 1284 if (count < len) 1285 pb->buf_get += count; 1286 else /* count == len */ 1287 pb->buf_get = pb->buf_buf; 1288 } 1289 1290 return count; 1291 } 1292 1293 /* module description and (de)initialization */ 1294 1295 static int __init oti6858_init(void) 1296 { 1297 int retval; 1298 1299 if ((retval = usb_serial_register(&oti6858_device)) == 0) { 1300 if ((retval = usb_register(&oti6858_driver)) != 0) 1301 usb_serial_deregister(&oti6858_device); 1302 else 1303 return 0; 1304 } 1305 1306 return retval; 1307 } 1308 1309 static void __exit oti6858_exit(void) 1310 { 1311 usb_deregister(&oti6858_driver); 1312 usb_serial_deregister(&oti6858_device); 1313 } 1314 1315 module_init(oti6858_init); 1316 module_exit(oti6858_exit); 1317 1318 MODULE_DESCRIPTION(OTI6858_DESCRIPTION); 1319 MODULE_AUTHOR(OTI6858_AUTHOR); 1320 MODULE_VERSION(OTI6858_VERSION); 1321 MODULE_LICENSE("GPL"); 1322 1323 module_param(debug, bool, S_IRUGO | S_IWUSR); 1324 MODULE_PARM_DESC(debug, "enable debug output"); 1325 1326