1 /*=======================================================/ 2 Header file for nsp_cs.c 3 By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> 4 5 Ver.1.0 : Cut unused lines. 6 Ver 0.1 : Initial version. 7 8 This software may be used and distributed according to the terms of 9 the GNU General Public License. 10 11 =========================================================*/ 12 13 /* $Id: nsp_cs.h,v 1.19 2003/08/18 11:09:19 elca Exp $ */ 14 15 #ifndef __nsp_cs__ 16 #define __nsp_cs__ 17 18 /* for debugging */ 19 //#define NSP_DEBUG 9 20 21 /* 22 #define static 23 #define inline 24 */ 25 26 /************************************ 27 * Some useful macros... 28 */ 29 #define BIT(x) (1L << (x)) 30 31 /* SCSI initiator must be ID 7 */ 32 #define NSP_INITIATOR_ID 7 33 34 #define NSP_SELTIMEOUT 200 35 36 /*************************************************************************** 37 * register definitions 38 ***************************************************************************/ 39 /*======================================================================== 40 * base register 41 ========================================================================*/ 42 #define IRQCONTROL 0x00 /* R */ 43 # define IRQCONTROL_RESELECT_CLEAR BIT(0) 44 # define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1) 45 # define IRQCONTROL_TIMER_CLEAR BIT(2) 46 # define IRQCONTROL_FIFO_CLEAR BIT(3) 47 # define IRQCONTROL_ALLMASK 0xff 48 # define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \ 49 IRQCONTROL_PHASE_CHANGE_CLEAR | \ 50 IRQCONTROL_TIMER_CLEAR | \ 51 IRQCONTROL_FIFO_CLEAR ) 52 # define IRQCONTROL_IRQDISABLE 0xf0 53 54 #define IRQSTATUS 0x00 /* W */ 55 # define IRQSTATUS_SCSI BIT(0) 56 # define IRQSTATUS_TIMER BIT(2) 57 # define IRQSTATUS_FIFO BIT(3) 58 # define IRQSTATUS_MASK 0x0f 59 60 #define IFSELECT 0x01 /* W */ 61 # define IF_IFSEL BIT(0) 62 # define IF_REGSEL BIT(2) 63 64 #define FIFOSTATUS 0x01 /* R */ 65 # define FIFOSTATUS_CHIP_REVISION_MASK 0x0f 66 # define FIFOSTATUS_CHIP_ID_MASK 0x70 67 # define FIFOSTATUS_FULL_EMPTY BIT(7) 68 69 #define INDEXREG 0x02 /* R/W */ 70 #define DATAREG 0x03 /* R/W */ 71 #define FIFODATA 0x04 /* R/W */ 72 #define FIFODATA1 0x05 /* R/W */ 73 #define FIFODATA2 0x06 /* R/W */ 74 #define FIFODATA3 0x07 /* R/W */ 75 76 /*==================================================================== 77 * indexed register 78 ====================================================================*/ 79 #define EXTBUSCTRL 0x10 /* R/W,deleted */ 80 81 #define CLOCKDIV 0x11 /* R/W */ 82 # define CLOCK_40M 0x02 83 # define CLOCK_20M 0x01 84 # define FAST_20 BIT(2) 85 86 #define TERMPWRCTRL 0x13 /* R/W */ 87 # define POWER_ON BIT(0) 88 89 #define SCSIIRQMODE 0x15 /* R/W */ 90 # define SCSI_PHASE_CHANGE_EI BIT(0) 91 # define RESELECT_EI BIT(4) 92 # define FIFO_IRQ_EI BIT(5) 93 # define SCSI_RESET_IRQ_EI BIT(6) 94 95 #define IRQPHASESENCE 0x16 /* R */ 96 # define LATCHED_MSG BIT(0) 97 # define LATCHED_IO BIT(1) 98 # define LATCHED_CD BIT(2) 99 # define LATCHED_BUS_FREE BIT(3) 100 # define PHASE_CHANGE_IRQ BIT(4) 101 # define RESELECT_IRQ BIT(5) 102 # define FIFO_IRQ BIT(6) 103 # define SCSI_RESET_IRQ BIT(7) 104 105 #define TIMERCOUNT 0x17 /* R/W */ 106 107 #define SCSIBUSCTRL 0x18 /* R/W */ 108 # define SCSI_SEL BIT(0) 109 # define SCSI_RST BIT(1) 110 # define SCSI_DATAOUT_ENB BIT(2) 111 # define SCSI_ATN BIT(3) 112 # define SCSI_ACK BIT(4) 113 # define SCSI_BSY BIT(5) 114 # define AUTODIRECTION BIT(6) 115 # define ACKENB BIT(7) 116 117 #define SCSIBUSMON 0x19 /* R */ 118 119 #define SETARBIT 0x1A /* W */ 120 # define ARBIT_GO BIT(0) 121 # define ARBIT_FLAG_CLEAR BIT(1) 122 123 #define ARBITSTATUS 0x1A /* R */ 124 /*# define ARBIT_GO BIT(0)*/ 125 # define ARBIT_WIN BIT(1) 126 # define ARBIT_FAIL BIT(2) 127 # define RESELECT_FLAG BIT(3) 128 129 #define PARITYCTRL 0x1B /* W */ 130 #define PARITYSTATUS 0x1B /* R */ 131 132 #define COMMANDCTRL 0x1C /* W */ 133 # define CLEAR_COMMAND_POINTER BIT(0) 134 # define AUTO_COMMAND_GO BIT(1) 135 136 #define RESELECTID 0x1C /* R */ 137 #define COMMANDDATA 0x1D /* R/W */ 138 139 #define POINTERCLR 0x1E /* W */ 140 # define POINTER_CLEAR BIT(0) 141 # define ACK_COUNTER_CLEAR BIT(1) 142 # define REQ_COUNTER_CLEAR BIT(2) 143 # define HOST_COUNTER_CLEAR BIT(3) 144 # define READ_SOURCE (BIT(4) | BIT(5)) 145 # define ACK_COUNTER (0) 146 # define REQ_COUNTER (BIT(4)) 147 # define HOST_COUNTER (BIT(5)) 148 149 #define TRANSFERCOUNT 0x1E /* R */ 150 151 #define TRANSFERMODE 0x20 /* R/W */ 152 # define MODE_MEM8 BIT(0) 153 # define MODE_MEM32 BIT(1) 154 # define MODE_ADR24 BIT(2) 155 # define MODE_ADR32 BIT(3) 156 # define MODE_IO8 BIT(4) 157 # define MODE_IO32 BIT(5) 158 # define TRANSFER_GO BIT(6) 159 # define BRAIND BIT(7) 160 161 #define SYNCREG 0x21 /* R/W */ 162 # define SYNCREG_OFFSET_MASK 0x0f 163 # define SYNCREG_PERIOD_MASK 0xf0 164 # define SYNCREG_PERIOD_SHIFT 4 165 166 #define SCSIDATALATCH 0x22 /* W */ 167 #define SCSIDATAIN 0x22 /* R */ 168 #define SCSIDATAWITHACK 0x23 /* R/W */ 169 #define SCAMCONTROL 0x24 /* W */ 170 #define SCAMSTATUS 0x24 /* R */ 171 #define SCAMDATA 0x25 /* R/W */ 172 173 #define OTHERCONTROL 0x26 /* R/W */ 174 # define TPL_ROM_WRITE_EN BIT(0) 175 # define TPWR_OUT BIT(1) 176 # define TPWR_SENSE BIT(2) 177 # define RA8_CONTROL BIT(3) 178 179 #define ACKWIDTH 0x27 /* R/W */ 180 #define CLRTESTPNT 0x28 /* W */ 181 #define ACKCNTLD 0x29 /* W */ 182 #define REQCNTLD 0x2A /* W */ 183 #define HSTCNTLD 0x2B /* W */ 184 #define CHECKSUM 0x2C /* R/W */ 185 186 /************************************************************************ 187 * Input status bit definitions. 188 ************************************************************************/ 189 #define S_MESSAGE BIT(0) /* Message line from SCSI bus */ 190 #define S_IO BIT(1) /* Input/Output line from SCSI bus */ 191 #define S_CD BIT(2) /* Command/Data line from SCSI bus */ 192 #define S_BUSY BIT(3) /* Busy line from SCSI bus */ 193 #define S_ACK BIT(4) /* Acknowlege line from SCSI bus */ 194 #define S_REQUEST BIT(5) /* Request line from SCSI bus */ 195 #define S_SELECT BIT(6) /* */ 196 #define S_ATN BIT(7) /* */ 197 198 /*********************************************************************** 199 * Useful Bus Monitor status combinations. 200 ***********************************************************************/ 201 #define BUSMON_SEL S_SELECT 202 #define BUSMON_BSY S_BUSY 203 #define BUSMON_REQ S_REQUEST 204 #define BUSMON_IO S_IO 205 #define BUSMON_ACK S_ACK 206 #define BUSMON_BUS_FREE 0 207 #define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST ) 208 #define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST ) 209 #define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST ) 210 #define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST ) 211 #define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST ) 212 #define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST ) 213 #define BUSMON_SELECT ( S_IO | S_SELECT ) 214 #define BUSMON_RESELECT ( S_IO | S_SELECT ) 215 #define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT ) 216 217 #define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK ) 218 #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) 219 #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) 220 #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) 221 #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) 222 #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) 223 #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) 224 225 /*====================================================================*/ 226 227 typedef struct scsi_info_t { 228 dev_link_t link; 229 struct Scsi_Host *host; 230 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74)) 231 dev_node_t node; 232 #else 233 int ndev; 234 dev_node_t node[8]; 235 struct bus_operations *bus; 236 #endif 237 int stop; 238 } scsi_info_t; 239 240 241 /* synchronous transfer negotiation data */ 242 typedef struct _sync_data { 243 unsigned int SyncNegotiation; 244 #define SYNC_NOT_YET 0 245 #define SYNC_OK 1 246 #define SYNC_NG 2 247 248 unsigned int SyncPeriod; 249 unsigned int SyncOffset; 250 unsigned char SyncRegister; 251 unsigned char AckWidth; 252 } sync_data; 253 254 typedef struct _nsp_hw_data { 255 unsigned int BaseAddress; 256 unsigned int NumAddress; 257 unsigned int IrqNumber; 258 259 unsigned long MmioAddress; 260 #define NSP_MMIO_OFFSET 0x0800 261 unsigned long MmioLength; 262 263 unsigned char ScsiClockDiv; 264 265 unsigned char TransferMode; 266 267 int TimerCount; 268 int SelectionTimeOut; 269 Scsi_Cmnd *CurrentSC; 270 //int CurrnetTarget; 271 272 int FifoCount; 273 274 #define MSGBUF_SIZE 20 275 unsigned char MsgBuffer[MSGBUF_SIZE]; 276 int MsgLen; 277 278 #define N_TARGET 8 279 sync_data Sync[N_TARGET]; 280 281 char nspinfo[110]; /* description */ 282 spinlock_t Lock; 283 284 scsi_info_t *ScsiInfo; /* attach <-> detect glue */ 285 286 287 #ifdef NSP_DEBUG 288 int CmdId; /* Accepted command serial number. 289 Used for debugging. */ 290 #endif 291 } nsp_hw_data; 292 293 294 /**************************************************************************** 295 * 296 */ 297 298 /* Card service functions */ 299 static dev_link_t *nsp_cs_attach (void); 300 static void nsp_cs_detach (dev_link_t *link); 301 static void nsp_cs_release(dev_link_t *link); 302 static void nsp_cs_config (dev_link_t *link); 303 static int nsp_cs_event (event_t event, int priority, event_callback_args_t *args); 304 305 /* Linux SCSI subsystem specific functions */ 306 static struct Scsi_Host *nsp_detect (Scsi_Host_Template *sht); 307 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) 308 static int nsp_detect_old (Scsi_Host_Template *sht); 309 static int nsp_release_old(struct Scsi_Host *shpnt); 310 #endif 311 static const char *nsp_info (struct Scsi_Host *shpnt); 312 static int nsp_proc_info ( 313 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) 314 struct Scsi_Host *host, 315 #endif 316 char *buffer, 317 char **start, 318 off_t offset, 319 int length, 320 #if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) 321 int hostno, 322 #endif 323 int inout); 324 static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt)); 325 326 /* Error handler */ 327 /*static int nsp_eh_abort (Scsi_Cmnd *SCpnt);*/ 328 /*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/ 329 static int nsp_eh_bus_reset (Scsi_Cmnd *SCpnt); 330 static int nsp_eh_host_reset (Scsi_Cmnd *SCpnt); 331 static int nsp_bus_reset (nsp_hw_data *data); 332 333 /* */ 334 static int nsphw_init (nsp_hw_data *data); 335 static int nsphw_start_selection(Scsi_Cmnd *SCpnt); 336 static void nsp_start_timer (Scsi_Cmnd *SCpnt, int time); 337 static int nsp_fifo_count (Scsi_Cmnd *SCpnt); 338 static void nsp_pio_read (Scsi_Cmnd *SCpnt); 339 static void nsp_pio_write (Scsi_Cmnd *SCpnt); 340 static int nsp_nexus (Scsi_Cmnd *SCpnt); 341 static void nsp_scsi_done (Scsi_Cmnd *SCpnt); 342 static int nsp_analyze_sdtr (Scsi_Cmnd *SCpnt); 343 static int nsp_negate_signal (Scsi_Cmnd *SCpnt, unsigned char mask, char *str); 344 static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase, unsigned char mask); 345 static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase); 346 static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt); 347 static int nsp_reselected (Scsi_Cmnd *SCpnt); 348 static struct Scsi_Host *nsp_detect(Scsi_Host_Template *sht); 349 350 /* Interrupt handler */ 351 //static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs); 352 353 /* Module entry point*/ 354 static int __init nsp_cs_init(void); 355 static void __exit nsp_cs_exit(void); 356 357 358 /* Debug */ 359 #ifdef NSP_DEBUG 360 static void show_command (Scsi_Cmnd *SCpnt); 361 static void show_phase (Scsi_Cmnd *SCpnt); 362 static void show_busphase(unsigned char stat); 363 static void show_message (nsp_hw_data *data); 364 #else 365 # define show_command(ptr) /* */ 366 # define show_phase(SCpnt) /* */ 367 # define show_busphase(stat) /* */ 368 # define show_message(data) /* */ 369 #endif 370 371 /* 372 * SCSI phase 373 */ 374 enum _scsi_phase { 375 PH_UNDETERMINED , 376 PH_ARBSTART , 377 PH_SELSTART , 378 PH_SELECTED , 379 PH_COMMAND , 380 PH_DATA , 381 PH_STATUS , 382 PH_MSG_IN , 383 PH_MSG_OUT , 384 PH_DISCONNECT , 385 PH_RESELECT , 386 PH_ABORT , 387 PH_RESET 388 }; 389 390 enum _data_in_out { 391 IO_UNKNOWN, 392 IO_IN, 393 IO_OUT 394 }; 395 396 enum _burst_mode { 397 BURST_IO8 = 0, 398 BURST_IO32 = 1, 399 BURST_MEM32 = 2, 400 }; 401 402 403 /************************************************************************** 404 * SCSI messaage 405 */ 406 #define MSG_COMMAND_COMPLETE 0x00 407 #define MSG_EXTENDED 0x01 408 #define MSG_ABORT 0x06 409 #define MSG_NO_OPERATION 0x08 410 #define MSG_BUS_DEVICE_RESET 0x0c 411 412 #define MSG_EXT_SDTR 0x01 413 414 415 /************************************************************************** 416 * Compatibility functions 417 */ 418 419 /* for Kernel 2.4 */ 420 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) 421 # define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template) 422 # define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template) 423 # define scsi_host_put(host) scsi_unregister(host) 424 425 typedef void irqreturn_t; 426 # define IRQ_NONE /* */ 427 # define IRQ_HANDLED /* */ 428 # define IRQ_RETVAL(x) /* */ 429 430 /* This is ad-hoc version of scsi_host_get_next() */ 431 static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host) 432 { 433 if (host == NULL) { 434 return scsi_hostlist; 435 } else { 436 return host->next; 437 } 438 } 439 440 /* This is ad-hoc version of scsi_host_hn_get() */ 441 static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno) 442 { 443 struct Scsi_Host *host; 444 445 for (host = scsi_host_get_next(NULL); host != NULL; 446 host = scsi_host_get_next(host)) { 447 if (host->host_no == hostno) { 448 break; 449 } 450 } 451 452 return host; 453 } 454 455 static void cs_error(client_handle_t handle, int func, int ret) 456 { 457 error_info_t err = { func, ret }; 458 pcmcia_report_error(handle, &err); 459 } 460 461 /* scatter-gather table */ 462 # define BUFFER_ADDR (SCpnt->SCp.buffer->address) 463 #endif 464 465 /* for Kernel 2.6 */ 466 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) 467 /* scatter-gather table */ 468 # define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset)) 469 #endif 470 471 #endif /*__nsp_cs__*/ 472 /* end */ 473