1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Support for SATA devices on Serial Attached SCSI (SAS) controllers 4 * 5 * Copyright (C) 2006 IBM Corporation 6 * 7 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation 8 */ 9 10 #include <linux/scatterlist.h> 11 #include <linux/slab.h> 12 #include <linux/async.h> 13 #include <linux/export.h> 14 15 #include <scsi/sas_ata.h> 16 #include "sas_internal.h" 17 #include <scsi/scsi_host.h> 18 #include <scsi/scsi_device.h> 19 #include <scsi/scsi_tcq.h> 20 #include <scsi/scsi.h> 21 #include <scsi/scsi_transport.h> 22 #include <scsi/scsi_transport_sas.h> 23 #include "../scsi_sas_internal.h" 24 #include "../scsi_transport_api.h" 25 #include <scsi/scsi_eh.h> 26 27 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) 28 { 29 /* Cheesy attempt to translate SAS errors into ATA. Hah! */ 30 31 /* transport error */ 32 if (ts->resp == SAS_TASK_UNDELIVERED) 33 return AC_ERR_ATA_BUS; 34 35 /* ts->resp == SAS_TASK_COMPLETE */ 36 /* task delivered, what happened afterwards? */ 37 switch (ts->stat) { 38 case SAS_DEV_NO_RESPONSE: 39 return AC_ERR_TIMEOUT; 40 41 case SAS_INTERRUPTED: 42 case SAS_PHY_DOWN: 43 case SAS_NAK_R_ERR: 44 return AC_ERR_ATA_BUS; 45 46 47 case SAS_DATA_UNDERRUN: 48 /* 49 * Some programs that use the taskfile interface 50 * (smartctl in particular) can cause underrun 51 * problems. Ignore these errors, perhaps at our 52 * peril. 53 */ 54 return 0; 55 56 case SAS_DATA_OVERRUN: 57 case SAS_QUEUE_FULL: 58 case SAS_DEVICE_UNKNOWN: 59 case SAS_SG_ERR: 60 return AC_ERR_INVALID; 61 62 case SAS_OPEN_TO: 63 case SAS_OPEN_REJECT: 64 pr_warn("%s: Saw error %d. What to do?\n", 65 __func__, ts->stat); 66 return AC_ERR_OTHER; 67 68 case SAM_STAT_CHECK_CONDITION: 69 case SAS_ABORTED_TASK: 70 return AC_ERR_DEV; 71 72 case SAS_PROTO_RESPONSE: 73 /* This means the ending_fis has the error 74 * value; return 0 here to collect it */ 75 return 0; 76 default: 77 return 0; 78 } 79 } 80 81 static void sas_ata_task_done(struct sas_task *task) 82 { 83 struct ata_queued_cmd *qc = task->uldd_task; 84 struct domain_device *dev = task->dev; 85 struct task_status_struct *stat = &task->task_status; 86 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; 87 struct sas_ha_struct *sas_ha = dev->port->ha; 88 enum ata_completion_errors ac; 89 unsigned long flags; 90 struct ata_link *link; 91 struct ata_port *ap; 92 93 spin_lock_irqsave(&dev->done_lock, flags); 94 if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) 95 task = NULL; 96 else if (qc && qc->scsicmd) 97 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 98 spin_unlock_irqrestore(&dev->done_lock, flags); 99 100 /* check if libsas-eh got to the task before us */ 101 if (unlikely(!task)) 102 return; 103 104 if (!qc) 105 goto qc_already_gone; 106 107 ap = qc->ap; 108 link = &ap->link; 109 110 spin_lock_irqsave(ap->lock, flags); 111 /* check if we lost the race with libata/sas_ata_post_internal() */ 112 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { 113 spin_unlock_irqrestore(ap->lock, flags); 114 if (qc->scsicmd) 115 goto qc_already_gone; 116 else { 117 /* if eh is not involved and the port is frozen then the 118 * ata internal abort process has taken responsibility 119 * for this sas_task 120 */ 121 return; 122 } 123 } 124 125 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || 126 ((stat->stat == SAM_STAT_CHECK_CONDITION && 127 dev->sata_dev.class == ATA_DEV_ATAPI))) { 128 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); 129 130 if (!link->sactive) { 131 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 132 } else { 133 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 134 if (unlikely(link->eh_info.err_mask)) 135 qc->flags |= ATA_QCFLAG_FAILED; 136 } 137 } else { 138 ac = sas_to_ata_err(stat); 139 if (ac) { 140 pr_warn("%s: SAS error 0x%x\n", __func__, stat->stat); 141 /* We saw a SAS error. Send a vague error. */ 142 if (!link->sactive) { 143 qc->err_mask = ac; 144 } else { 145 link->eh_info.err_mask |= AC_ERR_DEV; 146 qc->flags |= ATA_QCFLAG_FAILED; 147 } 148 149 dev->sata_dev.fis[3] = 0x04; /* status err */ 150 dev->sata_dev.fis[2] = ATA_ERR; 151 } 152 } 153 154 qc->lldd_task = NULL; 155 ata_qc_complete(qc); 156 spin_unlock_irqrestore(ap->lock, flags); 157 158 qc_already_gone: 159 sas_free_task(task); 160 } 161 162 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) 163 __must_hold(ap->lock) 164 { 165 struct sas_task *task; 166 struct scatterlist *sg; 167 int ret = AC_ERR_SYSTEM; 168 unsigned int si, xfer = 0; 169 struct ata_port *ap = qc->ap; 170 struct domain_device *dev = ap->private_data; 171 struct sas_ha_struct *sas_ha = dev->port->ha; 172 struct Scsi_Host *host = sas_ha->core.shost; 173 struct sas_internal *i = to_sas_internal(host->transportt); 174 175 /* TODO: we should try to remove that unlock */ 176 spin_unlock(ap->lock); 177 178 /* If the device fell off, no sense in issuing commands */ 179 if (test_bit(SAS_DEV_GONE, &dev->state)) 180 goto out; 181 182 task = sas_alloc_task(GFP_ATOMIC); 183 if (!task) 184 goto out; 185 task->dev = dev; 186 task->task_proto = SAS_PROTOCOL_STP; 187 task->task_done = sas_ata_task_done; 188 189 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 190 qc->tf.command == ATA_CMD_FPDMA_READ || 191 qc->tf.command == ATA_CMD_FPDMA_RECV || 192 qc->tf.command == ATA_CMD_FPDMA_SEND || 193 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 194 /* Need to zero out the tag libata assigned us */ 195 qc->tf.nsect = 0; 196 } 197 198 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); 199 task->uldd_task = qc; 200 if (ata_is_atapi(qc->tf.protocol)) { 201 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); 202 task->total_xfer_len = qc->nbytes; 203 task->num_scatter = qc->n_elem; 204 task->data_dir = qc->dma_dir; 205 } else if (qc->tf.protocol == ATA_PROT_NODATA) { 206 task->data_dir = DMA_NONE; 207 } else { 208 for_each_sg(qc->sg, sg, qc->n_elem, si) 209 xfer += sg_dma_len(sg); 210 211 task->total_xfer_len = xfer; 212 task->num_scatter = si; 213 task->data_dir = qc->dma_dir; 214 } 215 task->scatter = qc->sg; 216 task->ata_task.retry_count = 1; 217 task->task_state_flags = SAS_TASK_STATE_PENDING; 218 qc->lldd_task = task; 219 220 task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol); 221 task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol); 222 223 if (qc->scsicmd) 224 ASSIGN_SAS_TASK(qc->scsicmd, task); 225 226 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); 227 if (ret) { 228 pr_debug("lldd_execute_task returned: %d\n", ret); 229 230 if (qc->scsicmd) 231 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 232 sas_free_task(task); 233 qc->lldd_task = NULL; 234 ret = AC_ERR_SYSTEM; 235 } 236 237 out: 238 spin_lock(ap->lock); 239 return ret; 240 } 241 242 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) 243 { 244 struct domain_device *dev = qc->ap->private_data; 245 246 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); 247 return true; 248 } 249 250 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) 251 { 252 return to_sas_internal(dev->port->ha->core.shost->transportt); 253 } 254 255 static int sas_get_ata_command_set(struct domain_device *dev); 256 257 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) 258 { 259 if (phy->attached_tproto & SAS_PROTOCOL_STP) 260 dev->tproto = phy->attached_tproto; 261 if (phy->attached_sata_dev) 262 dev->tproto |= SAS_SATA_DEV; 263 264 if (phy->attached_dev_type == SAS_SATA_PENDING) 265 dev->dev_type = SAS_SATA_PENDING; 266 else { 267 int res; 268 269 dev->dev_type = SAS_SATA_DEV; 270 res = sas_get_report_phy_sata(dev->parent, phy->phy_id, 271 &dev->sata_dev.rps_resp); 272 if (res) { 273 pr_debug("report phy sata to %016llx:%02d returned 0x%x\n", 274 SAS_ADDR(dev->parent->sas_addr), 275 phy->phy_id, res); 276 return res; 277 } 278 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, 279 sizeof(struct dev_to_host_fis)); 280 dev->sata_dev.class = sas_get_ata_command_set(dev); 281 } 282 return 0; 283 } 284 285 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) 286 { 287 int res; 288 289 /* we weren't pending, so successfully end the reset sequence now */ 290 if (dev->dev_type != SAS_SATA_PENDING) 291 return 1; 292 293 /* hmmm, if this succeeds do we need to repost the domain_device to the 294 * lldd so it can pick up new parameters? 295 */ 296 res = sas_get_ata_info(dev, phy); 297 if (res) 298 return 0; /* retry */ 299 else 300 return 1; 301 } 302 303 static int smp_ata_check_ready(struct ata_link *link) 304 { 305 int res; 306 struct ata_port *ap = link->ap; 307 struct domain_device *dev = ap->private_data; 308 struct domain_device *ex_dev = dev->parent; 309 struct sas_phy *phy = sas_get_local_phy(dev); 310 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; 311 312 res = sas_ex_phy_discover(ex_dev, phy->number); 313 sas_put_local_phy(phy); 314 315 /* break the wait early if the expander is unreachable, 316 * otherwise keep polling 317 */ 318 if (res == -ECOMM) 319 return res; 320 if (res != SMP_RESP_FUNC_ACC) 321 return 0; 322 323 switch (ex_phy->attached_dev_type) { 324 case SAS_SATA_PENDING: 325 return 0; 326 case SAS_END_DEVICE: 327 if (ex_phy->attached_sata_dev) 328 return sas_ata_clear_pending(dev, ex_phy); 329 fallthrough; 330 default: 331 return -ENODEV; 332 } 333 } 334 335 static int local_ata_check_ready(struct ata_link *link) 336 { 337 struct ata_port *ap = link->ap; 338 struct domain_device *dev = ap->private_data; 339 struct sas_internal *i = dev_to_sas_internal(dev); 340 341 if (i->dft->lldd_ata_check_ready) 342 return i->dft->lldd_ata_check_ready(dev); 343 else { 344 /* lldd's that don't implement 'ready' checking get the 345 * old default behavior of not coordinating reset 346 * recovery with libata 347 */ 348 return 1; 349 } 350 } 351 352 static int sas_ata_printk(const char *level, const struct domain_device *ddev, 353 const char *fmt, ...) 354 { 355 struct ata_port *ap = ddev->sata_dev.ap; 356 struct device *dev = &ddev->rphy->dev; 357 struct va_format vaf; 358 va_list args; 359 int r; 360 361 va_start(args, fmt); 362 363 vaf.fmt = fmt; 364 vaf.va = &args; 365 366 r = printk("%s" SAS_FMT "ata%u: %s: %pV", 367 level, ap->print_id, dev_name(dev), &vaf); 368 369 va_end(args); 370 371 return r; 372 } 373 374 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, 375 unsigned long deadline) 376 { 377 int ret = 0, res; 378 struct sas_phy *phy; 379 struct ata_port *ap = link->ap; 380 int (*check_ready)(struct ata_link *link); 381 struct domain_device *dev = ap->private_data; 382 struct sas_internal *i = dev_to_sas_internal(dev); 383 384 res = i->dft->lldd_I_T_nexus_reset(dev); 385 if (res == -ENODEV) 386 return res; 387 388 if (res != TMF_RESP_FUNC_COMPLETE) 389 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); 390 391 phy = sas_get_local_phy(dev); 392 if (scsi_is_sas_phy_local(phy)) 393 check_ready = local_ata_check_ready; 394 else 395 check_ready = smp_ata_check_ready; 396 sas_put_local_phy(phy); 397 398 ret = ata_wait_after_reset(link, deadline, check_ready); 399 if (ret && ret != -EAGAIN) 400 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); 401 402 *class = dev->sata_dev.class; 403 404 ap->cbl = ATA_CBL_SATA; 405 return ret; 406 } 407 408 /* 409 * notify the lldd to forget the sas_task for this internal ata command 410 * that bypasses scsi-eh 411 */ 412 static void sas_ata_internal_abort(struct sas_task *task) 413 { 414 struct sas_internal *si = dev_to_sas_internal(task->dev); 415 unsigned long flags; 416 int res; 417 418 spin_lock_irqsave(&task->task_state_lock, flags); 419 if (task->task_state_flags & SAS_TASK_STATE_ABORTED || 420 task->task_state_flags & SAS_TASK_STATE_DONE) { 421 spin_unlock_irqrestore(&task->task_state_lock, flags); 422 pr_debug("%s: Task %p already finished.\n", __func__, task); 423 goto out; 424 } 425 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 426 spin_unlock_irqrestore(&task->task_state_lock, flags); 427 428 res = si->dft->lldd_abort_task(task); 429 430 spin_lock_irqsave(&task->task_state_lock, flags); 431 if (task->task_state_flags & SAS_TASK_STATE_DONE || 432 res == TMF_RESP_FUNC_COMPLETE) { 433 spin_unlock_irqrestore(&task->task_state_lock, flags); 434 goto out; 435 } 436 437 /* XXX we are not prepared to deal with ->lldd_abort_task() 438 * failures. TODO: lldds need to unconditionally forget about 439 * aborted ata tasks, otherwise we (likely) leak the sas task 440 * here 441 */ 442 pr_warn("%s: Task %p leaked.\n", __func__, task); 443 444 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) 445 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; 446 spin_unlock_irqrestore(&task->task_state_lock, flags); 447 448 return; 449 out: 450 sas_free_task(task); 451 } 452 453 static void sas_ata_post_internal(struct ata_queued_cmd *qc) 454 { 455 if (qc->flags & ATA_QCFLAG_FAILED) 456 qc->err_mask |= AC_ERR_OTHER; 457 458 if (qc->err_mask) { 459 /* 460 * Find the sas_task and kill it. By this point, libata 461 * has decided to kill the qc and has frozen the port. 462 * In this state sas_ata_task_done() will no longer free 463 * the sas_task, so we need to notify the lldd (via 464 * ->lldd_abort_task) that the task is dead and free it 465 * ourselves. 466 */ 467 struct sas_task *task = qc->lldd_task; 468 469 qc->lldd_task = NULL; 470 if (!task) 471 return; 472 task->uldd_task = NULL; 473 sas_ata_internal_abort(task); 474 } 475 } 476 477 478 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) 479 { 480 struct domain_device *dev = ap->private_data; 481 struct sas_internal *i = dev_to_sas_internal(dev); 482 483 if (i->dft->lldd_ata_set_dmamode) 484 i->dft->lldd_ata_set_dmamode(dev); 485 } 486 487 static void sas_ata_sched_eh(struct ata_port *ap) 488 { 489 struct domain_device *dev = ap->private_data; 490 struct sas_ha_struct *ha = dev->port->ha; 491 unsigned long flags; 492 493 spin_lock_irqsave(&ha->lock, flags); 494 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state)) 495 ha->eh_active++; 496 ata_std_sched_eh(ap); 497 spin_unlock_irqrestore(&ha->lock, flags); 498 } 499 500 void sas_ata_end_eh(struct ata_port *ap) 501 { 502 struct domain_device *dev = ap->private_data; 503 struct sas_ha_struct *ha = dev->port->ha; 504 unsigned long flags; 505 506 spin_lock_irqsave(&ha->lock, flags); 507 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state)) 508 ha->eh_active--; 509 spin_unlock_irqrestore(&ha->lock, flags); 510 } 511 512 static int sas_ata_prereset(struct ata_link *link, unsigned long deadline) 513 { 514 struct ata_port *ap = link->ap; 515 struct domain_device *dev = ap->private_data; 516 struct sas_phy *local_phy = sas_get_local_phy(dev); 517 int res = 0; 518 519 if (!local_phy->enabled || test_bit(SAS_DEV_GONE, &dev->state)) 520 res = -ENOENT; 521 sas_put_local_phy(local_phy); 522 523 return res; 524 } 525 526 static struct ata_port_operations sas_sata_ops = { 527 .prereset = sas_ata_prereset, 528 .hardreset = sas_ata_hard_reset, 529 .error_handler = ata_std_error_handler, 530 .post_internal_cmd = sas_ata_post_internal, 531 .qc_defer = ata_std_qc_defer, 532 .qc_prep = ata_noop_qc_prep, 533 .qc_issue = sas_ata_qc_issue, 534 .qc_fill_rtf = sas_ata_qc_fill_rtf, 535 .port_start = ata_sas_port_start, 536 .port_stop = ata_sas_port_stop, 537 .set_dmamode = sas_ata_set_dmamode, 538 .sched_eh = sas_ata_sched_eh, 539 .end_eh = sas_ata_end_eh, 540 }; 541 542 static struct ata_port_info sata_port_info = { 543 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | 544 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, 545 .pio_mask = ATA_PIO4, 546 .mwdma_mask = ATA_MWDMA2, 547 .udma_mask = ATA_UDMA6, 548 .port_ops = &sas_sata_ops 549 }; 550 551 int sas_ata_init(struct domain_device *found_dev) 552 { 553 struct sas_ha_struct *ha = found_dev->port->ha; 554 struct Scsi_Host *shost = ha->core.shost; 555 struct ata_host *ata_host; 556 struct ata_port *ap; 557 int rc; 558 559 ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL); 560 if (!ata_host) { 561 pr_err("ata host alloc failed.\n"); 562 return -ENOMEM; 563 } 564 565 ata_host_init(ata_host, ha->dev, &sas_sata_ops); 566 567 ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost); 568 if (!ap) { 569 pr_err("ata_sas_port_alloc failed.\n"); 570 rc = -ENODEV; 571 goto free_host; 572 } 573 574 ap->private_data = found_dev; 575 ap->cbl = ATA_CBL_SATA; 576 ap->scsi_host = shost; 577 rc = ata_sas_port_init(ap); 578 if (rc) 579 goto destroy_port; 580 581 rc = ata_sas_tport_add(ata_host->dev, ap); 582 if (rc) 583 goto destroy_port; 584 585 found_dev->sata_dev.ata_host = ata_host; 586 found_dev->sata_dev.ap = ap; 587 588 return 0; 589 590 destroy_port: 591 ata_sas_port_destroy(ap); 592 free_host: 593 ata_host_put(ata_host); 594 return rc; 595 } 596 597 void sas_ata_task_abort(struct sas_task *task) 598 { 599 struct ata_queued_cmd *qc = task->uldd_task; 600 struct completion *waiting; 601 602 /* Bounce SCSI-initiated commands to the SCSI EH */ 603 if (qc->scsicmd) { 604 blk_abort_request(qc->scsicmd->request); 605 return; 606 } 607 608 /* Internal command, fake a timeout and complete. */ 609 qc->flags &= ~ATA_QCFLAG_ACTIVE; 610 qc->flags |= ATA_QCFLAG_FAILED; 611 qc->err_mask |= AC_ERR_TIMEOUT; 612 waiting = qc->private_data; 613 complete(waiting); 614 } 615 616 static int sas_get_ata_command_set(struct domain_device *dev) 617 { 618 struct dev_to_host_fis *fis = 619 (struct dev_to_host_fis *) dev->frame_rcvd; 620 struct ata_taskfile tf; 621 622 if (dev->dev_type == SAS_SATA_PENDING) 623 return ATA_DEV_UNKNOWN; 624 625 ata_tf_from_fis((const u8 *)fis, &tf); 626 627 return ata_dev_classify(&tf); 628 } 629 630 void sas_probe_sata(struct asd_sas_port *port) 631 { 632 struct domain_device *dev, *n; 633 634 mutex_lock(&port->ha->disco_mutex); 635 list_for_each_entry(dev, &port->disco_list, disco_list_node) { 636 if (!dev_is_sata(dev)) 637 continue; 638 639 ata_sas_async_probe(dev->sata_dev.ap); 640 } 641 mutex_unlock(&port->ha->disco_mutex); 642 643 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { 644 if (!dev_is_sata(dev)) 645 continue; 646 647 sas_ata_wait_eh(dev); 648 649 /* if libata could not bring the link up, don't surface 650 * the device 651 */ 652 if (!ata_dev_enabled(sas_to_ata_dev(dev))) 653 sas_fail_probe(dev, __func__, -ENODEV); 654 } 655 656 } 657 658 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) 659 { 660 struct domain_device *dev, *n; 661 662 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { 663 if (!dev_is_sata(dev)) 664 continue; 665 666 sas_ata_wait_eh(dev); 667 668 /* if libata failed to power manage the device, tear it down */ 669 if (ata_dev_disabled(sas_to_ata_dev(dev))) 670 sas_fail_probe(dev, func, -ENODEV); 671 } 672 } 673 674 void sas_suspend_sata(struct asd_sas_port *port) 675 { 676 struct domain_device *dev; 677 678 mutex_lock(&port->ha->disco_mutex); 679 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 680 struct sata_device *sata; 681 682 if (!dev_is_sata(dev)) 683 continue; 684 685 sata = &dev->sata_dev; 686 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) 687 continue; 688 689 ata_sas_port_suspend(sata->ap); 690 } 691 mutex_unlock(&port->ha->disco_mutex); 692 693 sas_ata_flush_pm_eh(port, __func__); 694 } 695 696 void sas_resume_sata(struct asd_sas_port *port) 697 { 698 struct domain_device *dev; 699 700 mutex_lock(&port->ha->disco_mutex); 701 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 702 struct sata_device *sata; 703 704 if (!dev_is_sata(dev)) 705 continue; 706 707 sata = &dev->sata_dev; 708 if (sata->ap->pm_mesg.event == PM_EVENT_ON) 709 continue; 710 711 ata_sas_port_resume(sata->ap); 712 } 713 mutex_unlock(&port->ha->disco_mutex); 714 715 sas_ata_flush_pm_eh(port, __func__); 716 } 717 718 /** 719 * sas_discover_sata - discover an STP/SATA domain device 720 * @dev: pointer to struct domain_device of interest 721 * 722 * Devices directly attached to a HA port, have no parents. All other 723 * devices do, and should have their "parent" pointer set appropriately 724 * before calling this function. 725 */ 726 int sas_discover_sata(struct domain_device *dev) 727 { 728 if (dev->dev_type == SAS_SATA_PM) 729 return -ENODEV; 730 731 dev->sata_dev.class = sas_get_ata_command_set(dev); 732 sas_fill_in_rphy(dev, dev->rphy); 733 734 return sas_notify_lldd_dev_found(dev); 735 } 736 737 static void async_sas_ata_eh(void *data, async_cookie_t cookie) 738 { 739 struct domain_device *dev = data; 740 struct ata_port *ap = dev->sata_dev.ap; 741 struct sas_ha_struct *ha = dev->port->ha; 742 743 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); 744 ata_scsi_port_error_handler(ha->core.shost, ap); 745 sas_put_device(dev); 746 } 747 748 void sas_ata_strategy_handler(struct Scsi_Host *shost) 749 { 750 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); 751 ASYNC_DOMAIN_EXCLUSIVE(async); 752 int i; 753 754 /* it's ok to defer revalidation events during ata eh, these 755 * disks are in one of three states: 756 * 1/ present for initial domain discovery, and these 757 * resets will cause bcn flutters 758 * 2/ hot removed, we'll discover that after eh fails 759 * 3/ hot added after initial discovery, lost the race, and need 760 * to catch the next train. 761 */ 762 sas_disable_revalidation(sas_ha); 763 764 spin_lock_irq(&sas_ha->phy_port_lock); 765 for (i = 0; i < sas_ha->num_phys; i++) { 766 struct asd_sas_port *port = sas_ha->sas_port[i]; 767 struct domain_device *dev; 768 769 spin_lock(&port->dev_list_lock); 770 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 771 if (!dev_is_sata(dev)) 772 continue; 773 774 /* hold a reference over eh since we may be 775 * racing with final remove once all commands 776 * are completed 777 */ 778 kref_get(&dev->kref); 779 780 async_schedule_domain(async_sas_ata_eh, dev, &async); 781 } 782 spin_unlock(&port->dev_list_lock); 783 } 784 spin_unlock_irq(&sas_ha->phy_port_lock); 785 786 async_synchronize_full_domain(&async); 787 788 sas_enable_revalidation(sas_ha); 789 } 790 791 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, 792 struct list_head *done_q) 793 { 794 struct scsi_cmnd *cmd, *n; 795 struct domain_device *eh_dev; 796 797 do { 798 LIST_HEAD(sata_q); 799 eh_dev = NULL; 800 801 list_for_each_entry_safe(cmd, n, work_q, eh_entry) { 802 struct domain_device *ddev = cmd_to_domain_dev(cmd); 803 804 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) 805 continue; 806 if (eh_dev && eh_dev != ddev) 807 continue; 808 eh_dev = ddev; 809 list_move(&cmd->eh_entry, &sata_q); 810 } 811 812 if (!list_empty(&sata_q)) { 813 struct ata_port *ap = eh_dev->sata_dev.ap; 814 815 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); 816 ata_scsi_cmd_error_handler(shost, ap, &sata_q); 817 /* 818 * ata's error handler may leave the cmd on the list 819 * so make sure they don't remain on a stack list 820 * about to go out of scope. 821 * 822 * This looks strange, since the commands are 823 * now part of no list, but the next error 824 * action will be ata_port_error_handler() 825 * which takes no list and sweeps them up 826 * anyway from the ata tag array. 827 */ 828 while (!list_empty(&sata_q)) 829 list_del_init(sata_q.next); 830 } 831 } while (eh_dev); 832 } 833 834 void sas_ata_schedule_reset(struct domain_device *dev) 835 { 836 struct ata_eh_info *ehi; 837 struct ata_port *ap; 838 unsigned long flags; 839 840 if (!dev_is_sata(dev)) 841 return; 842 843 ap = dev->sata_dev.ap; 844 ehi = &ap->link.eh_info; 845 846 spin_lock_irqsave(ap->lock, flags); 847 ehi->err_mask |= AC_ERR_TIMEOUT; 848 ehi->action |= ATA_EH_RESET; 849 ata_port_schedule_eh(ap); 850 spin_unlock_irqrestore(ap->lock, flags); 851 } 852 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); 853 854 void sas_ata_wait_eh(struct domain_device *dev) 855 { 856 struct ata_port *ap; 857 858 if (!dev_is_sata(dev)) 859 return; 860 861 ap = dev->sata_dev.ap; 862 ata_port_wait_eh(ap); 863 } 864