1 /* 2 * USB Network driver infrastructure 3 * Copyright (C) 2000-2005 by David Brownell 4 * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 21 /* 22 * This is a generic "USB networking" framework that works with several 23 * kinds of full and high speed networking devices: host-to-host cables, 24 * smart usb peripherals, and actual Ethernet adapters. 25 * 26 * These devices usually differ in terms of control protocols (if they 27 * even have one!) and sometimes they define new framing to wrap or batch 28 * Ethernet packets. Otherwise, they talk to USB pretty much the same, 29 * so interface (un)binding, endpoint I/O queues, fault handling, and other 30 * issues can usefully be addressed by this framework. 31 */ 32 33 // #define DEBUG // error path messages, extra info 34 // #define VERBOSE // more; success messages 35 36 #include <linux/module.h> 37 #include <linux/init.h> 38 #include <linux/netdevice.h> 39 #include <linux/etherdevice.h> 40 #include <linux/ethtool.h> 41 #include <linux/workqueue.h> 42 #include <linux/mii.h> 43 #include <linux/usb.h> 44 45 #include "usbnet.h" 46 47 #define DRIVER_VERSION "22-Aug-2005" 48 49 50 /*-------------------------------------------------------------------------*/ 51 52 /* 53 * Nineteen USB 1.1 max size bulk transactions per frame (ms), max. 54 * Several dozen bytes of IPv4 data can fit in two such transactions. 55 * One maximum size Ethernet packet takes twenty four of them. 56 * For high speed, each frame comfortably fits almost 36 max size 57 * Ethernet packets (so queues should be bigger). 58 * 59 * REVISIT qlens should be members of 'struct usbnet'; the goal is to 60 * let the USB host controller be busy for 5msec or more before an irq 61 * is required, under load. Jumbograms change the equation. 62 */ 63 #define RX_MAX_QUEUE_MEMORY (60 * 1518) 64 #define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ 65 (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4) 66 #define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \ 67 (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4) 68 69 // reawaken network queue this soon after stopping; else watchdog barks 70 #define TX_TIMEOUT_JIFFIES (5*HZ) 71 72 // throttle rx/tx briefly after some faults, so khubd might disconnect() 73 // us (it polls at HZ/4 usually) before we report too many false errors. 74 #define THROTTLE_JIFFIES (HZ/8) 75 76 // between wakeups 77 #define UNLINK_TIMEOUT_MS 3 78 79 /*-------------------------------------------------------------------------*/ 80 81 // randomly generated ethernet address 82 static u8 node_id [ETH_ALEN]; 83 84 static const char driver_name [] = "usbnet"; 85 86 /* use ethtool to change the level for any given device */ 87 static int msg_level = -1; 88 module_param (msg_level, int, 0); 89 MODULE_PARM_DESC (msg_level, "Override default message level"); 90 91 /*-------------------------------------------------------------------------*/ 92 93 /* handles CDC Ethernet and many other network "bulk data" interfaces */ 94 int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) 95 { 96 int tmp; 97 struct usb_host_interface *alt = NULL; 98 struct usb_host_endpoint *in = NULL, *out = NULL; 99 struct usb_host_endpoint *status = NULL; 100 101 for (tmp = 0; tmp < intf->num_altsetting; tmp++) { 102 unsigned ep; 103 104 in = out = status = NULL; 105 alt = intf->altsetting + tmp; 106 107 /* take the first altsetting with in-bulk + out-bulk; 108 * remember any status endpoint, just in case; 109 * ignore other endpoints and altsetttings. 110 */ 111 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { 112 struct usb_host_endpoint *e; 113 int intr = 0; 114 115 e = alt->endpoint + ep; 116 switch (e->desc.bmAttributes) { 117 case USB_ENDPOINT_XFER_INT: 118 if (!usb_endpoint_dir_in(&e->desc)) 119 continue; 120 intr = 1; 121 /* FALLTHROUGH */ 122 case USB_ENDPOINT_XFER_BULK: 123 break; 124 default: 125 continue; 126 } 127 if (usb_endpoint_dir_in(&e->desc)) { 128 if (!intr && !in) 129 in = e; 130 else if (intr && !status) 131 status = e; 132 } else { 133 if (!out) 134 out = e; 135 } 136 } 137 if (in && out) 138 break; 139 } 140 if (!alt || !in || !out) 141 return -EINVAL; 142 143 if (alt->desc.bAlternateSetting != 0 144 || !(dev->driver_info->flags & FLAG_NO_SETINT)) { 145 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber, 146 alt->desc.bAlternateSetting); 147 if (tmp < 0) 148 return tmp; 149 } 150 151 dev->in = usb_rcvbulkpipe (dev->udev, 152 in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); 153 dev->out = usb_sndbulkpipe (dev->udev, 154 out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); 155 dev->status = status; 156 return 0; 157 } 158 EXPORT_SYMBOL_GPL(usbnet_get_endpoints); 159 160 static void intr_complete (struct urb *urb); 161 162 static int init_status (struct usbnet *dev, struct usb_interface *intf) 163 { 164 char *buf = NULL; 165 unsigned pipe = 0; 166 unsigned maxp; 167 unsigned period; 168 169 if (!dev->driver_info->status) 170 return 0; 171 172 pipe = usb_rcvintpipe (dev->udev, 173 dev->status->desc.bEndpointAddress 174 & USB_ENDPOINT_NUMBER_MASK); 175 maxp = usb_maxpacket (dev->udev, pipe, 0); 176 177 /* avoid 1 msec chatter: min 8 msec poll rate */ 178 period = max ((int) dev->status->desc.bInterval, 179 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3); 180 181 buf = kmalloc (maxp, GFP_KERNEL); 182 if (buf) { 183 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL); 184 if (!dev->interrupt) { 185 kfree (buf); 186 return -ENOMEM; 187 } else { 188 usb_fill_int_urb(dev->interrupt, dev->udev, pipe, 189 buf, maxp, intr_complete, dev, period); 190 dev_dbg(&intf->dev, 191 "status ep%din, %d bytes period %d\n", 192 usb_pipeendpoint(pipe), maxp, period); 193 } 194 } 195 return 0; 196 } 197 198 /* Passes this packet up the stack, updating its accounting. 199 * Some link protocols batch packets, so their rx_fixup paths 200 * can return clones as well as just modify the original skb. 201 */ 202 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb) 203 { 204 int status; 205 206 skb->protocol = eth_type_trans (skb, dev->net); 207 dev->stats.rx_packets++; 208 dev->stats.rx_bytes += skb->len; 209 210 if (netif_msg_rx_status (dev)) 211 devdbg (dev, "< rx, len %zu, type 0x%x", 212 skb->len + sizeof (struct ethhdr), skb->protocol); 213 memset (skb->cb, 0, sizeof (struct skb_data)); 214 status = netif_rx (skb); 215 if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev)) 216 devdbg (dev, "netif_rx status %d", status); 217 } 218 EXPORT_SYMBOL_GPL(usbnet_skb_return); 219 220 221 /*------------------------------------------------------------------------- 222 * 223 * Network Device Driver (peer link to "Host Device", from USB host) 224 * 225 *-------------------------------------------------------------------------*/ 226 227 static int usbnet_change_mtu (struct net_device *net, int new_mtu) 228 { 229 struct usbnet *dev = netdev_priv(net); 230 int ll_mtu = new_mtu + net->hard_header_len; 231 int old_hard_mtu = dev->hard_mtu; 232 int old_rx_urb_size = dev->rx_urb_size; 233 234 if (new_mtu <= 0) 235 return -EINVAL; 236 // no second zero-length packet read wanted after mtu-sized packets 237 if ((ll_mtu % dev->maxpacket) == 0) 238 return -EDOM; 239 net->mtu = new_mtu; 240 241 dev->hard_mtu = net->mtu + net->hard_header_len; 242 if (dev->rx_urb_size == old_hard_mtu) { 243 dev->rx_urb_size = dev->hard_mtu; 244 if (dev->rx_urb_size > old_rx_urb_size) 245 usbnet_unlink_rx_urbs(dev); 246 } 247 248 return 0; 249 } 250 251 /*-------------------------------------------------------------------------*/ 252 253 static struct net_device_stats *usbnet_get_stats (struct net_device *net) 254 { 255 struct usbnet *dev = netdev_priv(net); 256 return &dev->stats; 257 } 258 259 /*-------------------------------------------------------------------------*/ 260 261 /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from 262 * completion callbacks. 2.5 should have fixed those bugs... 263 */ 264 265 static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list) 266 { 267 unsigned long flags; 268 269 spin_lock_irqsave(&list->lock, flags); 270 __skb_unlink(skb, list); 271 spin_unlock(&list->lock); 272 spin_lock(&dev->done.lock); 273 __skb_queue_tail(&dev->done, skb); 274 if (dev->done.qlen == 1) 275 tasklet_schedule(&dev->bh); 276 spin_unlock_irqrestore(&dev->done.lock, flags); 277 } 278 279 /* some work can't be done in tasklets, so we use keventd 280 * 281 * NOTE: annoying asymmetry: if it's active, schedule_work() fails, 282 * but tasklet_schedule() doesn't. hope the failure is rare. 283 */ 284 void usbnet_defer_kevent (struct usbnet *dev, int work) 285 { 286 set_bit (work, &dev->flags); 287 if (!schedule_work (&dev->kevent)) 288 deverr (dev, "kevent %d may have been dropped", work); 289 else 290 devdbg (dev, "kevent %d scheduled", work); 291 } 292 EXPORT_SYMBOL_GPL(usbnet_defer_kevent); 293 294 /*-------------------------------------------------------------------------*/ 295 296 static void rx_complete (struct urb *urb); 297 298 static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) 299 { 300 struct sk_buff *skb; 301 struct skb_data *entry; 302 int retval = 0; 303 unsigned long lockflags; 304 size_t size = dev->rx_urb_size; 305 306 if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) { 307 if (netif_msg_rx_err (dev)) 308 devdbg (dev, "no rx skb"); 309 usbnet_defer_kevent (dev, EVENT_RX_MEMORY); 310 usb_free_urb (urb); 311 return; 312 } 313 skb_reserve (skb, NET_IP_ALIGN); 314 315 entry = (struct skb_data *) skb->cb; 316 entry->urb = urb; 317 entry->dev = dev; 318 entry->state = rx_start; 319 entry->length = 0; 320 321 usb_fill_bulk_urb (urb, dev->udev, dev->in, 322 skb->data, size, rx_complete, skb); 323 324 spin_lock_irqsave (&dev->rxq.lock, lockflags); 325 326 if (netif_running (dev->net) 327 && netif_device_present (dev->net) 328 && !test_bit (EVENT_RX_HALT, &dev->flags)) { 329 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){ 330 case -EPIPE: 331 usbnet_defer_kevent (dev, EVENT_RX_HALT); 332 break; 333 case -ENOMEM: 334 usbnet_defer_kevent (dev, EVENT_RX_MEMORY); 335 break; 336 case -ENODEV: 337 if (netif_msg_ifdown (dev)) 338 devdbg (dev, "device gone"); 339 netif_device_detach (dev->net); 340 break; 341 default: 342 if (netif_msg_rx_err (dev)) 343 devdbg (dev, "rx submit, %d", retval); 344 tasklet_schedule (&dev->bh); 345 break; 346 case 0: 347 __skb_queue_tail (&dev->rxq, skb); 348 } 349 } else { 350 if (netif_msg_ifdown (dev)) 351 devdbg (dev, "rx: stopped"); 352 retval = -ENOLINK; 353 } 354 spin_unlock_irqrestore (&dev->rxq.lock, lockflags); 355 if (retval) { 356 dev_kfree_skb_any (skb); 357 usb_free_urb (urb); 358 } 359 } 360 361 362 /*-------------------------------------------------------------------------*/ 363 364 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) 365 { 366 if (dev->driver_info->rx_fixup 367 && !dev->driver_info->rx_fixup (dev, skb)) 368 goto error; 369 // else network stack removes extra byte if we forced a short packet 370 371 if (skb->len) 372 usbnet_skb_return (dev, skb); 373 else { 374 if (netif_msg_rx_err (dev)) 375 devdbg (dev, "drop"); 376 error: 377 dev->stats.rx_errors++; 378 skb_queue_tail (&dev->done, skb); 379 } 380 } 381 382 /*-------------------------------------------------------------------------*/ 383 384 static void rx_complete (struct urb *urb) 385 { 386 struct sk_buff *skb = (struct sk_buff *) urb->context; 387 struct skb_data *entry = (struct skb_data *) skb->cb; 388 struct usbnet *dev = entry->dev; 389 int urb_status = urb->status; 390 391 skb_put (skb, urb->actual_length); 392 entry->state = rx_done; 393 entry->urb = NULL; 394 395 switch (urb_status) { 396 // success 397 case 0: 398 if (skb->len < dev->net->hard_header_len) { 399 entry->state = rx_cleanup; 400 dev->stats.rx_errors++; 401 dev->stats.rx_length_errors++; 402 if (netif_msg_rx_err (dev)) 403 devdbg (dev, "rx length %d", skb->len); 404 } 405 break; 406 407 // stalls need manual reset. this is rare ... except that 408 // when going through USB 2.0 TTs, unplug appears this way. 409 // we avoid the highspeed version of the ETIMEOUT/EILSEQ 410 // storm, recovering as needed. 411 case -EPIPE: 412 dev->stats.rx_errors++; 413 usbnet_defer_kevent (dev, EVENT_RX_HALT); 414 // FALLTHROUGH 415 416 // software-driven interface shutdown 417 case -ECONNRESET: // async unlink 418 case -ESHUTDOWN: // hardware gone 419 if (netif_msg_ifdown (dev)) 420 devdbg (dev, "rx shutdown, code %d", urb_status); 421 goto block; 422 423 // we get controller i/o faults during khubd disconnect() delays. 424 // throttle down resubmits, to avoid log floods; just temporarily, 425 // so we still recover when the fault isn't a khubd delay. 426 case -EPROTO: 427 case -ETIME: 428 case -EILSEQ: 429 dev->stats.rx_errors++; 430 if (!timer_pending (&dev->delay)) { 431 mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); 432 if (netif_msg_link (dev)) 433 devdbg (dev, "rx throttle %d", urb_status); 434 } 435 block: 436 entry->state = rx_cleanup; 437 entry->urb = urb; 438 urb = NULL; 439 break; 440 441 // data overrun ... flush fifo? 442 case -EOVERFLOW: 443 dev->stats.rx_over_errors++; 444 // FALLTHROUGH 445 446 default: 447 entry->state = rx_cleanup; 448 dev->stats.rx_errors++; 449 if (netif_msg_rx_err (dev)) 450 devdbg (dev, "rx status %d", urb_status); 451 break; 452 } 453 454 defer_bh(dev, skb, &dev->rxq); 455 456 if (urb) { 457 if (netif_running (dev->net) 458 && !test_bit (EVENT_RX_HALT, &dev->flags)) { 459 rx_submit (dev, urb, GFP_ATOMIC); 460 return; 461 } 462 usb_free_urb (urb); 463 } 464 if (netif_msg_rx_err (dev)) 465 devdbg (dev, "no read resubmitted"); 466 } 467 468 static void intr_complete (struct urb *urb) 469 { 470 struct usbnet *dev = urb->context; 471 int status = urb->status; 472 473 switch (status) { 474 /* success */ 475 case 0: 476 dev->driver_info->status(dev, urb); 477 break; 478 479 /* software-driven interface shutdown */ 480 case -ENOENT: // urb killed 481 case -ESHUTDOWN: // hardware gone 482 if (netif_msg_ifdown (dev)) 483 devdbg (dev, "intr shutdown, code %d", status); 484 return; 485 486 /* NOTE: not throttling like RX/TX, since this endpoint 487 * already polls infrequently 488 */ 489 default: 490 devdbg (dev, "intr status %d", status); 491 break; 492 } 493 494 if (!netif_running (dev->net)) 495 return; 496 497 memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); 498 status = usb_submit_urb (urb, GFP_ATOMIC); 499 if (status != 0 && netif_msg_timer (dev)) 500 deverr(dev, "intr resubmit --> %d", status); 501 } 502 503 /*-------------------------------------------------------------------------*/ 504 505 // unlink pending rx/tx; completion handlers do all other cleanup 506 507 static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) 508 { 509 unsigned long flags; 510 struct sk_buff *skb, *skbnext; 511 int count = 0; 512 513 spin_lock_irqsave (&q->lock, flags); 514 for (skb = q->next; skb != (struct sk_buff *) q; skb = skbnext) { 515 struct skb_data *entry; 516 struct urb *urb; 517 int retval; 518 519 entry = (struct skb_data *) skb->cb; 520 urb = entry->urb; 521 skbnext = skb->next; 522 523 // during some PM-driven resume scenarios, 524 // these (async) unlinks complete immediately 525 retval = usb_unlink_urb (urb); 526 if (retval != -EINPROGRESS && retval != 0) 527 devdbg (dev, "unlink urb err, %d", retval); 528 else 529 count++; 530 } 531 spin_unlock_irqrestore (&q->lock, flags); 532 return count; 533 } 534 535 // Flush all pending rx urbs 536 // minidrivers may need to do this when the MTU changes 537 538 void usbnet_unlink_rx_urbs(struct usbnet *dev) 539 { 540 if (netif_running(dev->net)) { 541 (void) unlink_urbs (dev, &dev->rxq); 542 tasklet_schedule(&dev->bh); 543 } 544 } 545 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs); 546 547 /*-------------------------------------------------------------------------*/ 548 549 // precondition: never called in_interrupt 550 551 static int usbnet_stop (struct net_device *net) 552 { 553 struct usbnet *dev = netdev_priv(net); 554 int temp; 555 DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup); 556 DECLARE_WAITQUEUE (wait, current); 557 558 netif_stop_queue (net); 559 560 if (netif_msg_ifdown (dev)) 561 devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld", 562 dev->stats.rx_packets, dev->stats.tx_packets, 563 dev->stats.rx_errors, dev->stats.tx_errors 564 ); 565 566 // ensure there are no more active urbs 567 add_wait_queue (&unlink_wakeup, &wait); 568 dev->wait = &unlink_wakeup; 569 temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq); 570 571 // maybe wait for deletions to finish. 572 while (!skb_queue_empty(&dev->rxq) && 573 !skb_queue_empty(&dev->txq) && 574 !skb_queue_empty(&dev->done)) { 575 msleep(UNLINK_TIMEOUT_MS); 576 if (netif_msg_ifdown (dev)) 577 devdbg (dev, "waited for %d urb completions", temp); 578 } 579 dev->wait = NULL; 580 remove_wait_queue (&unlink_wakeup, &wait); 581 582 usb_kill_urb(dev->interrupt); 583 584 /* deferred work (task, timer, softirq) must also stop. 585 * can't flush_scheduled_work() until we drop rtnl (later), 586 * else workers could deadlock; so make workers a NOP. 587 */ 588 dev->flags = 0; 589 del_timer_sync (&dev->delay); 590 tasklet_kill (&dev->bh); 591 592 return 0; 593 } 594 595 /*-------------------------------------------------------------------------*/ 596 597 // posts reads, and enables write queuing 598 599 // precondition: never called in_interrupt 600 601 static int usbnet_open (struct net_device *net) 602 { 603 struct usbnet *dev = netdev_priv(net); 604 int retval = 0; 605 struct driver_info *info = dev->driver_info; 606 607 // put into "known safe" state 608 if (info->reset && (retval = info->reset (dev)) < 0) { 609 if (netif_msg_ifup (dev)) 610 devinfo (dev, 611 "open reset fail (%d) usbnet usb-%s-%s, %s", 612 retval, 613 dev->udev->bus->bus_name, dev->udev->devpath, 614 info->description); 615 goto done; 616 } 617 618 // insist peer be connected 619 if (info->check_connect && (retval = info->check_connect (dev)) < 0) { 620 if (netif_msg_ifup (dev)) 621 devdbg (dev, "can't open; %d", retval); 622 goto done; 623 } 624 625 /* start any status interrupt transfer */ 626 if (dev->interrupt) { 627 retval = usb_submit_urb (dev->interrupt, GFP_KERNEL); 628 if (retval < 0) { 629 if (netif_msg_ifup (dev)) 630 deverr (dev, "intr submit %d", retval); 631 goto done; 632 } 633 } 634 635 netif_start_queue (net); 636 if (netif_msg_ifup (dev)) { 637 char *framing; 638 639 if (dev->driver_info->flags & FLAG_FRAMING_NC) 640 framing = "NetChip"; 641 else if (dev->driver_info->flags & FLAG_FRAMING_GL) 642 framing = "GeneSys"; 643 else if (dev->driver_info->flags & FLAG_FRAMING_Z) 644 framing = "Zaurus"; 645 else if (dev->driver_info->flags & FLAG_FRAMING_RN) 646 framing = "RNDIS"; 647 else if (dev->driver_info->flags & FLAG_FRAMING_AX) 648 framing = "ASIX"; 649 else 650 framing = "simple"; 651 652 devinfo (dev, "open: enable queueing " 653 "(rx %d, tx %d) mtu %d %s framing", 654 (int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu, 655 framing); 656 } 657 658 // delay posting reads until we're fully open 659 tasklet_schedule (&dev->bh); 660 done: 661 return retval; 662 } 663 664 /*-------------------------------------------------------------------------*/ 665 666 /* ethtool methods; minidrivers may need to add some more, but 667 * they'll probably want to use this base set. 668 */ 669 670 #if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE) 671 #define HAVE_MII 672 673 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) 674 { 675 struct usbnet *dev = netdev_priv(net); 676 677 if (!dev->mii.mdio_read) 678 return -EOPNOTSUPP; 679 680 return mii_ethtool_gset(&dev->mii, cmd); 681 } 682 EXPORT_SYMBOL_GPL(usbnet_get_settings); 683 684 int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) 685 { 686 struct usbnet *dev = netdev_priv(net); 687 int retval; 688 689 if (!dev->mii.mdio_write) 690 return -EOPNOTSUPP; 691 692 retval = mii_ethtool_sset(&dev->mii, cmd); 693 694 /* link speed/duplex might have changed */ 695 if (dev->driver_info->link_reset) 696 dev->driver_info->link_reset(dev); 697 698 return retval; 699 700 } 701 EXPORT_SYMBOL_GPL(usbnet_set_settings); 702 703 u32 usbnet_get_link (struct net_device *net) 704 { 705 struct usbnet *dev = netdev_priv(net); 706 707 /* If a check_connect is defined, return its result */ 708 if (dev->driver_info->check_connect) 709 return dev->driver_info->check_connect (dev) == 0; 710 711 /* if the device has mii operations, use those */ 712 if (dev->mii.mdio_read) 713 return mii_link_ok(&dev->mii); 714 715 /* Otherwise, say we're up (to avoid breaking scripts) */ 716 return 1; 717 } 718 EXPORT_SYMBOL_GPL(usbnet_get_link); 719 720 int usbnet_nway_reset(struct net_device *net) 721 { 722 struct usbnet *dev = netdev_priv(net); 723 724 if (!dev->mii.mdio_write) 725 return -EOPNOTSUPP; 726 727 return mii_nway_restart(&dev->mii); 728 } 729 EXPORT_SYMBOL_GPL(usbnet_nway_reset); 730 731 #endif /* HAVE_MII */ 732 733 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) 734 { 735 struct usbnet *dev = netdev_priv(net); 736 737 strncpy (info->driver, dev->driver_name, sizeof info->driver); 738 strncpy (info->version, DRIVER_VERSION, sizeof info->version); 739 strncpy (info->fw_version, dev->driver_info->description, 740 sizeof info->fw_version); 741 usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); 742 } 743 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); 744 745 u32 usbnet_get_msglevel (struct net_device *net) 746 { 747 struct usbnet *dev = netdev_priv(net); 748 749 return dev->msg_enable; 750 } 751 EXPORT_SYMBOL_GPL(usbnet_get_msglevel); 752 753 void usbnet_set_msglevel (struct net_device *net, u32 level) 754 { 755 struct usbnet *dev = netdev_priv(net); 756 757 dev->msg_enable = level; 758 } 759 EXPORT_SYMBOL_GPL(usbnet_set_msglevel); 760 761 /* drivers may override default ethtool_ops in their bind() routine */ 762 static struct ethtool_ops usbnet_ethtool_ops = { 763 #ifdef HAVE_MII 764 .get_settings = usbnet_get_settings, 765 .set_settings = usbnet_set_settings, 766 .get_link = usbnet_get_link, 767 .nway_reset = usbnet_nway_reset, 768 #endif 769 .get_drvinfo = usbnet_get_drvinfo, 770 .get_msglevel = usbnet_get_msglevel, 771 .set_msglevel = usbnet_set_msglevel, 772 }; 773 774 /*-------------------------------------------------------------------------*/ 775 776 /* work that cannot be done in interrupt context uses keventd. 777 * 778 * NOTE: with 2.5 we could do more of this using completion callbacks, 779 * especially now that control transfers can be queued. 780 */ 781 static void 782 kevent (struct work_struct *work) 783 { 784 struct usbnet *dev = 785 container_of(work, struct usbnet, kevent); 786 int status; 787 788 /* usb_clear_halt() needs a thread context */ 789 if (test_bit (EVENT_TX_HALT, &dev->flags)) { 790 unlink_urbs (dev, &dev->txq); 791 status = usb_clear_halt (dev->udev, dev->out); 792 if (status < 0 793 && status != -EPIPE 794 && status != -ESHUTDOWN) { 795 if (netif_msg_tx_err (dev)) 796 deverr (dev, "can't clear tx halt, status %d", 797 status); 798 } else { 799 clear_bit (EVENT_TX_HALT, &dev->flags); 800 if (status != -ESHUTDOWN) 801 netif_wake_queue (dev->net); 802 } 803 } 804 if (test_bit (EVENT_RX_HALT, &dev->flags)) { 805 unlink_urbs (dev, &dev->rxq); 806 status = usb_clear_halt (dev->udev, dev->in); 807 if (status < 0 808 && status != -EPIPE 809 && status != -ESHUTDOWN) { 810 if (netif_msg_rx_err (dev)) 811 deverr (dev, "can't clear rx halt, status %d", 812 status); 813 } else { 814 clear_bit (EVENT_RX_HALT, &dev->flags); 815 tasklet_schedule (&dev->bh); 816 } 817 } 818 819 /* tasklet could resubmit itself forever if memory is tight */ 820 if (test_bit (EVENT_RX_MEMORY, &dev->flags)) { 821 struct urb *urb = NULL; 822 823 if (netif_running (dev->net)) 824 urb = usb_alloc_urb (0, GFP_KERNEL); 825 else 826 clear_bit (EVENT_RX_MEMORY, &dev->flags); 827 if (urb != NULL) { 828 clear_bit (EVENT_RX_MEMORY, &dev->flags); 829 rx_submit (dev, urb, GFP_KERNEL); 830 tasklet_schedule (&dev->bh); 831 } 832 } 833 834 if (test_bit (EVENT_LINK_RESET, &dev->flags)) { 835 struct driver_info *info = dev->driver_info; 836 int retval = 0; 837 838 clear_bit (EVENT_LINK_RESET, &dev->flags); 839 if(info->link_reset && (retval = info->link_reset(dev)) < 0) { 840 devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s", 841 retval, 842 dev->udev->bus->bus_name, dev->udev->devpath, 843 info->description); 844 } 845 } 846 847 if (dev->flags) 848 devdbg (dev, "kevent done, flags = 0x%lx", 849 dev->flags); 850 } 851 852 /*-------------------------------------------------------------------------*/ 853 854 static void tx_complete (struct urb *urb) 855 { 856 struct sk_buff *skb = (struct sk_buff *) urb->context; 857 struct skb_data *entry = (struct skb_data *) skb->cb; 858 struct usbnet *dev = entry->dev; 859 860 if (urb->status == 0) { 861 dev->stats.tx_packets++; 862 dev->stats.tx_bytes += entry->length; 863 } else { 864 dev->stats.tx_errors++; 865 866 switch (urb->status) { 867 case -EPIPE: 868 usbnet_defer_kevent (dev, EVENT_TX_HALT); 869 break; 870 871 /* software-driven interface shutdown */ 872 case -ECONNRESET: // async unlink 873 case -ESHUTDOWN: // hardware gone 874 break; 875 876 // like rx, tx gets controller i/o faults during khubd delays 877 // and so it uses the same throttling mechanism. 878 case -EPROTO: 879 case -ETIME: 880 case -EILSEQ: 881 if (!timer_pending (&dev->delay)) { 882 mod_timer (&dev->delay, 883 jiffies + THROTTLE_JIFFIES); 884 if (netif_msg_link (dev)) 885 devdbg (dev, "tx throttle %d", 886 urb->status); 887 } 888 netif_stop_queue (dev->net); 889 break; 890 default: 891 if (netif_msg_tx_err (dev)) 892 devdbg (dev, "tx err %d", entry->urb->status); 893 break; 894 } 895 } 896 897 urb->dev = NULL; 898 entry->state = tx_done; 899 defer_bh(dev, skb, &dev->txq); 900 } 901 902 /*-------------------------------------------------------------------------*/ 903 904 static void usbnet_tx_timeout (struct net_device *net) 905 { 906 struct usbnet *dev = netdev_priv(net); 907 908 unlink_urbs (dev, &dev->txq); 909 tasklet_schedule (&dev->bh); 910 911 // FIXME: device recovery -- reset? 912 } 913 914 /*-------------------------------------------------------------------------*/ 915 916 static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) 917 { 918 struct usbnet *dev = netdev_priv(net); 919 int length; 920 int retval = NET_XMIT_SUCCESS; 921 struct urb *urb = NULL; 922 struct skb_data *entry; 923 struct driver_info *info = dev->driver_info; 924 unsigned long flags; 925 926 // some devices want funky USB-level framing, for 927 // win32 driver (usually) and/or hardware quirks 928 if (info->tx_fixup) { 929 skb = info->tx_fixup (dev, skb, GFP_ATOMIC); 930 if (!skb) { 931 if (netif_msg_tx_err (dev)) 932 devdbg (dev, "can't tx_fixup skb"); 933 goto drop; 934 } 935 } 936 length = skb->len; 937 938 if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) { 939 if (netif_msg_tx_err (dev)) 940 devdbg (dev, "no urb"); 941 goto drop; 942 } 943 944 entry = (struct skb_data *) skb->cb; 945 entry->urb = urb; 946 entry->dev = dev; 947 entry->state = tx_start; 948 entry->length = length; 949 950 usb_fill_bulk_urb (urb, dev->udev, dev->out, 951 skb->data, skb->len, tx_complete, skb); 952 953 /* don't assume the hardware handles USB_ZERO_PACKET 954 * NOTE: strictly conforming cdc-ether devices should expect 955 * the ZLP here, but ignore the one-byte packet. 956 */ 957 if ((length % dev->maxpacket) == 0) { 958 urb->transfer_buffer_length++; 959 if (skb_tailroom(skb)) { 960 skb->data[skb->len] = 0; 961 __skb_put(skb, 1); 962 } 963 } 964 965 spin_lock_irqsave (&dev->txq.lock, flags); 966 967 switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) { 968 case -EPIPE: 969 netif_stop_queue (net); 970 usbnet_defer_kevent (dev, EVENT_TX_HALT); 971 break; 972 default: 973 if (netif_msg_tx_err (dev)) 974 devdbg (dev, "tx: submit urb err %d", retval); 975 break; 976 case 0: 977 net->trans_start = jiffies; 978 __skb_queue_tail (&dev->txq, skb); 979 if (dev->txq.qlen >= TX_QLEN (dev)) 980 netif_stop_queue (net); 981 } 982 spin_unlock_irqrestore (&dev->txq.lock, flags); 983 984 if (retval) { 985 if (netif_msg_tx_err (dev)) 986 devdbg (dev, "drop, code %d", retval); 987 drop: 988 retval = NET_XMIT_SUCCESS; 989 dev->stats.tx_dropped++; 990 if (skb) 991 dev_kfree_skb_any (skb); 992 usb_free_urb (urb); 993 } else if (netif_msg_tx_queued (dev)) { 994 devdbg (dev, "> tx, len %d, type 0x%x", 995 length, skb->protocol); 996 } 997 return retval; 998 } 999 1000 1001 /*-------------------------------------------------------------------------*/ 1002 1003 // tasklet (work deferred from completions, in_irq) or timer 1004 1005 static void usbnet_bh (unsigned long param) 1006 { 1007 struct usbnet *dev = (struct usbnet *) param; 1008 struct sk_buff *skb; 1009 struct skb_data *entry; 1010 1011 while ((skb = skb_dequeue (&dev->done))) { 1012 entry = (struct skb_data *) skb->cb; 1013 switch (entry->state) { 1014 case rx_done: 1015 entry->state = rx_cleanup; 1016 rx_process (dev, skb); 1017 continue; 1018 case tx_done: 1019 case rx_cleanup: 1020 usb_free_urb (entry->urb); 1021 dev_kfree_skb (skb); 1022 continue; 1023 default: 1024 devdbg (dev, "bogus skb state %d", entry->state); 1025 } 1026 } 1027 1028 // waiting for all pending urbs to complete? 1029 if (dev->wait) { 1030 if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) { 1031 wake_up (dev->wait); 1032 } 1033 1034 // or are we maybe short a few urbs? 1035 } else if (netif_running (dev->net) 1036 && netif_device_present (dev->net) 1037 && !timer_pending (&dev->delay) 1038 && !test_bit (EVENT_RX_HALT, &dev->flags)) { 1039 int temp = dev->rxq.qlen; 1040 int qlen = RX_QLEN (dev); 1041 1042 if (temp < qlen) { 1043 struct urb *urb; 1044 int i; 1045 1046 // don't refill the queue all at once 1047 for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { 1048 urb = usb_alloc_urb (0, GFP_ATOMIC); 1049 if (urb != NULL) 1050 rx_submit (dev, urb, GFP_ATOMIC); 1051 } 1052 if (temp != dev->rxq.qlen && netif_msg_link (dev)) 1053 devdbg (dev, "rxqlen %d --> %d", 1054 temp, dev->rxq.qlen); 1055 if (dev->rxq.qlen < qlen) 1056 tasklet_schedule (&dev->bh); 1057 } 1058 if (dev->txq.qlen < TX_QLEN (dev)) 1059 netif_wake_queue (dev->net); 1060 } 1061 } 1062 1063 1064 1065 /*------------------------------------------------------------------------- 1066 * 1067 * USB Device Driver support 1068 * 1069 *-------------------------------------------------------------------------*/ 1070 1071 // precondition: never called in_interrupt 1072 1073 void usbnet_disconnect (struct usb_interface *intf) 1074 { 1075 struct usbnet *dev; 1076 struct usb_device *xdev; 1077 struct net_device *net; 1078 1079 dev = usb_get_intfdata(intf); 1080 usb_set_intfdata(intf, NULL); 1081 if (!dev) 1082 return; 1083 1084 xdev = interface_to_usbdev (intf); 1085 1086 if (netif_msg_probe (dev)) 1087 devinfo (dev, "unregister '%s' usb-%s-%s, %s", 1088 intf->dev.driver->name, 1089 xdev->bus->bus_name, xdev->devpath, 1090 dev->driver_info->description); 1091 1092 net = dev->net; 1093 unregister_netdev (net); 1094 1095 /* we don't hold rtnl here ... */ 1096 flush_scheduled_work (); 1097 1098 if (dev->driver_info->unbind) 1099 dev->driver_info->unbind (dev, intf); 1100 1101 free_netdev(net); 1102 usb_put_dev (xdev); 1103 } 1104 EXPORT_SYMBOL_GPL(usbnet_disconnect); 1105 1106 1107 /*-------------------------------------------------------------------------*/ 1108 1109 // precondition: never called in_interrupt 1110 1111 int 1112 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) 1113 { 1114 struct usbnet *dev; 1115 struct net_device *net; 1116 struct usb_host_interface *interface; 1117 struct driver_info *info; 1118 struct usb_device *xdev; 1119 int status; 1120 const char *name; 1121 1122 name = udev->dev.driver->name; 1123 info = (struct driver_info *) prod->driver_info; 1124 if (!info) { 1125 dev_dbg (&udev->dev, "blacklisted by %s\n", name); 1126 return -ENODEV; 1127 } 1128 xdev = interface_to_usbdev (udev); 1129 interface = udev->cur_altsetting; 1130 1131 usb_get_dev (xdev); 1132 1133 status = -ENOMEM; 1134 1135 // set up our own records 1136 net = alloc_etherdev(sizeof(*dev)); 1137 if (!net) { 1138 dbg ("can't kmalloc dev"); 1139 goto out; 1140 } 1141 1142 dev = netdev_priv(net); 1143 dev->udev = xdev; 1144 dev->driver_info = info; 1145 dev->driver_name = name; 1146 dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV 1147 | NETIF_MSG_PROBE | NETIF_MSG_LINK); 1148 skb_queue_head_init (&dev->rxq); 1149 skb_queue_head_init (&dev->txq); 1150 skb_queue_head_init (&dev->done); 1151 dev->bh.func = usbnet_bh; 1152 dev->bh.data = (unsigned long) dev; 1153 INIT_WORK (&dev->kevent, kevent); 1154 dev->delay.function = usbnet_bh; 1155 dev->delay.data = (unsigned long) dev; 1156 init_timer (&dev->delay); 1157 mutex_init (&dev->phy_mutex); 1158 1159 SET_MODULE_OWNER (net); 1160 dev->net = net; 1161 strcpy (net->name, "usb%d"); 1162 memcpy (net->dev_addr, node_id, sizeof node_id); 1163 1164 /* rx and tx sides can use different message sizes; 1165 * bind() should set rx_urb_size in that case. 1166 */ 1167 dev->hard_mtu = net->mtu + net->hard_header_len; 1168 #if 0 1169 // dma_supported() is deeply broken on almost all architectures 1170 // possible with some EHCI controllers 1171 if (dma_supported (&udev->dev, DMA_64BIT_MASK)) 1172 net->features |= NETIF_F_HIGHDMA; 1173 #endif 1174 1175 net->change_mtu = usbnet_change_mtu; 1176 net->get_stats = usbnet_get_stats; 1177 net->hard_start_xmit = usbnet_start_xmit; 1178 net->open = usbnet_open; 1179 net->stop = usbnet_stop; 1180 net->watchdog_timeo = TX_TIMEOUT_JIFFIES; 1181 net->tx_timeout = usbnet_tx_timeout; 1182 net->ethtool_ops = &usbnet_ethtool_ops; 1183 1184 // allow device-specific bind/init procedures 1185 // NOTE net->name still not usable ... 1186 if (info->bind) { 1187 status = info->bind (dev, udev); 1188 if (status < 0) 1189 goto out1; 1190 1191 // heuristic: "usb%d" for links we know are two-host, 1192 // else "eth%d" when there's reasonable doubt. userspace 1193 // can rename the link if it knows better. 1194 if ((dev->driver_info->flags & FLAG_ETHER) != 0 1195 && (net->dev_addr [0] & 0x02) == 0) 1196 strcpy (net->name, "eth%d"); 1197 1198 /* maybe the remote can't receive an Ethernet MTU */ 1199 if (net->mtu > (dev->hard_mtu - net->hard_header_len)) 1200 net->mtu = dev->hard_mtu - net->hard_header_len; 1201 } else if (!info->in || !info->out) 1202 status = usbnet_get_endpoints (dev, udev); 1203 else { 1204 dev->in = usb_rcvbulkpipe (xdev, info->in); 1205 dev->out = usb_sndbulkpipe (xdev, info->out); 1206 if (!(info->flags & FLAG_NO_SETINT)) 1207 status = usb_set_interface (xdev, 1208 interface->desc.bInterfaceNumber, 1209 interface->desc.bAlternateSetting); 1210 else 1211 status = 0; 1212 1213 } 1214 if (status == 0 && dev->status) 1215 status = init_status (dev, udev); 1216 if (status < 0) 1217 goto out3; 1218 1219 if (!dev->rx_urb_size) 1220 dev->rx_urb_size = dev->hard_mtu; 1221 dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); 1222 1223 SET_NETDEV_DEV(net, &udev->dev); 1224 status = register_netdev (net); 1225 if (status) 1226 goto out3; 1227 if (netif_msg_probe (dev)) 1228 devinfo (dev, "register '%s' at usb-%s-%s, %s, " 1229 "%02x:%02x:%02x:%02x:%02x:%02x", 1230 udev->dev.driver->name, 1231 xdev->bus->bus_name, xdev->devpath, 1232 dev->driver_info->description, 1233 net->dev_addr [0], net->dev_addr [1], 1234 net->dev_addr [2], net->dev_addr [3], 1235 net->dev_addr [4], net->dev_addr [5]); 1236 1237 // ok, it's ready to go. 1238 usb_set_intfdata (udev, dev); 1239 1240 // start as if the link is up 1241 netif_device_attach (net); 1242 1243 return 0; 1244 1245 out3: 1246 if (info->unbind) 1247 info->unbind (dev, udev); 1248 out1: 1249 free_netdev(net); 1250 out: 1251 usb_put_dev(xdev); 1252 return status; 1253 } 1254 EXPORT_SYMBOL_GPL(usbnet_probe); 1255 1256 /*-------------------------------------------------------------------------*/ 1257 1258 /* 1259 * suspend the whole driver as soon as the first interface is suspended 1260 * resume only when the last interface is resumed 1261 */ 1262 1263 int usbnet_suspend (struct usb_interface *intf, pm_message_t message) 1264 { 1265 struct usbnet *dev = usb_get_intfdata(intf); 1266 1267 if (!dev->suspend_count++) { 1268 /* accelerate emptying of the rx and queues, to avoid 1269 * having everything error out. 1270 */ 1271 netif_device_detach (dev->net); 1272 (void) unlink_urbs (dev, &dev->rxq); 1273 (void) unlink_urbs (dev, &dev->txq); 1274 } 1275 return 0; 1276 } 1277 EXPORT_SYMBOL_GPL(usbnet_suspend); 1278 1279 int usbnet_resume (struct usb_interface *intf) 1280 { 1281 struct usbnet *dev = usb_get_intfdata(intf); 1282 1283 if (!--dev->suspend_count) { 1284 netif_device_attach (dev->net); 1285 tasklet_schedule (&dev->bh); 1286 } 1287 return 0; 1288 } 1289 EXPORT_SYMBOL_GPL(usbnet_resume); 1290 1291 1292 /*-------------------------------------------------------------------------*/ 1293 1294 static int __init usbnet_init(void) 1295 { 1296 /* compiler should optimize this out */ 1297 BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb) 1298 < sizeof (struct skb_data)); 1299 1300 random_ether_addr(node_id); 1301 return 0; 1302 } 1303 module_init(usbnet_init); 1304 1305 static void __exit usbnet_exit(void) 1306 { 1307 } 1308 module_exit(usbnet_exit); 1309 1310 MODULE_AUTHOR("David Brownell"); 1311 MODULE_DESCRIPTION("USB network driver framework"); 1312 MODULE_LICENSE("GPL"); 1313