xref: /openbmc/linux/drivers/net/usb/hso.c (revision fa251f89903d73989e2f63e13d0eaed1e07ce0da)
1 /******************************************************************************
2  *
3  * Driver for Option High Speed Mobile Devices.
4  *
5  *  Copyright (C) 2008 Option International
6  *                     Filip Aben <f.aben@option.com>
7  *                     Denis Joseph Barrow <d.barow@option.com>
8  *                     Jan Dumon <j.dumon@option.com>
9  *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
10  *  			<ajb@spheresystems.co.uk>
11  *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
12  *  Copyright (C) 2008 Novell, Inc.
13  *
14  *  This program is free software; you can redistribute it and/or modify
15  *  it under the terms of the GNU General Public License version 2 as
16  *  published by the Free Software Foundation.
17  *
18  *  This program is distributed in the hope that it will be useful,
19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  *  GNU General Public License for more details.
22  *
23  *  You should have received a copy of the GNU General Public License
24  *  along with this program; if not, write to the Free Software
25  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
26  *  USA
27  *
28  *
29  *****************************************************************************/
30 
31 /******************************************************************************
32  *
33  * Description of the device:
34  *
35  * Interface 0:	Contains the IP network interface on the bulk end points.
36  *		The multiplexed serial ports are using the interrupt and
37  *		control endpoints.
38  *		Interrupt contains a bitmap telling which multiplexed
39  *		serialport needs servicing.
40  *
41  * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
42  *		port is opened, as this have a huge impact on the network port
43  *		throughput.
44  *
45  * Interface 2:	Standard modem interface - circuit switched interface, this
46  *		can be used to make a standard ppp connection however it
47  *              should not be used in conjunction with the IP network interface
48  *              enabled for USB performance reasons i.e. if using this set
49  *              ideally disable_net=1.
50  *
51  *****************************************************************************/
52 
53 #include <linux/sched.h>
54 #include <linux/slab.h>
55 #include <linux/init.h>
56 #include <linux/delay.h>
57 #include <linux/netdevice.h>
58 #include <linux/module.h>
59 #include <linux/ethtool.h>
60 #include <linux/usb.h>
61 #include <linux/timer.h>
62 #include <linux/tty.h>
63 #include <linux/tty_driver.h>
64 #include <linux/tty_flip.h>
65 #include <linux/kmod.h>
66 #include <linux/rfkill.h>
67 #include <linux/ip.h>
68 #include <linux/uaccess.h>
69 #include <linux/usb/cdc.h>
70 #include <net/arp.h>
71 #include <asm/byteorder.h>
72 #include <linux/serial_core.h>
73 #include <linux/serial.h>
74 
75 
76 #define MOD_AUTHOR			"Option Wireless"
77 #define MOD_DESCRIPTION			"USB High Speed Option driver"
78 #define MOD_LICENSE			"GPL"
79 
80 #define HSO_MAX_NET_DEVICES		10
81 #define HSO__MAX_MTU			2048
82 #define DEFAULT_MTU			1500
83 #define DEFAULT_MRU			1500
84 
85 #define CTRL_URB_RX_SIZE		1024
86 #define CTRL_URB_TX_SIZE		64
87 
88 #define BULK_URB_RX_SIZE		4096
89 #define BULK_URB_TX_SIZE		8192
90 
91 #define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
92 #define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
93 #define MUX_BULK_RX_BUF_COUNT		4
94 #define USB_TYPE_OPTION_VENDOR		0x20
95 
96 /* These definitions are used with the struct hso_net flags element */
97 /* - use *_bit operations on it. (bit indices not values.) */
98 #define HSO_NET_RUNNING			0
99 
100 #define	HSO_NET_TX_TIMEOUT		(HZ*10)
101 
102 #define HSO_SERIAL_MAGIC		0x48534f31
103 
104 /* Number of ttys to handle */
105 #define HSO_SERIAL_TTY_MINORS		256
106 
107 #define MAX_RX_URBS			2
108 
109 static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
110 {
111 	if (tty)
112 		return tty->driver_data;
113 	return NULL;
114 }
115 
116 /*****************************************************************************/
117 /* Debugging functions                                                       */
118 /*****************************************************************************/
119 #define D__(lvl_, fmt, arg...)				\
120 	do {						\
121 		printk(lvl_ "[%d:%s]: " fmt "\n",	\
122 		       __LINE__, __func__, ## arg);	\
123 	} while (0)
124 
125 #define D_(lvl, args...)				\
126 	do {						\
127 		if (lvl & debug)			\
128 			D__(KERN_INFO, args);		\
129 	} while (0)
130 
131 #define D1(args...)	D_(0x01, ##args)
132 #define D2(args...)	D_(0x02, ##args)
133 #define D3(args...)	D_(0x04, ##args)
134 #define D4(args...)	D_(0x08, ##args)
135 #define D5(args...)	D_(0x10, ##args)
136 
137 /*****************************************************************************/
138 /* Enumerators                                                               */
139 /*****************************************************************************/
140 enum pkt_parse_state {
141 	WAIT_IP,
142 	WAIT_DATA,
143 	WAIT_SYNC
144 };
145 
146 /*****************************************************************************/
147 /* Structs                                                                   */
148 /*****************************************************************************/
149 
150 struct hso_shared_int {
151 	struct usb_endpoint_descriptor *intr_endp;
152 	void *shared_intr_buf;
153 	struct urb *shared_intr_urb;
154 	struct usb_device *usb;
155 	int use_count;
156 	int ref_count;
157 	struct mutex shared_int_lock;
158 };
159 
160 struct hso_net {
161 	struct hso_device *parent;
162 	struct net_device *net;
163 	struct rfkill *rfkill;
164 
165 	struct usb_endpoint_descriptor *in_endp;
166 	struct usb_endpoint_descriptor *out_endp;
167 
168 	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
169 	struct urb *mux_bulk_tx_urb;
170 	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
171 	void *mux_bulk_tx_buf;
172 
173 	struct sk_buff *skb_rx_buf;
174 	struct sk_buff *skb_tx_buf;
175 
176 	enum pkt_parse_state rx_parse_state;
177 	spinlock_t net_lock;
178 
179 	unsigned short rx_buf_size;
180 	unsigned short rx_buf_missing;
181 	struct iphdr rx_ip_hdr;
182 
183 	unsigned long flags;
184 };
185 
186 enum rx_ctrl_state{
187 	RX_IDLE,
188 	RX_SENT,
189 	RX_PENDING
190 };
191 
192 #define BM_REQUEST_TYPE (0xa1)
193 #define B_NOTIFICATION  (0x20)
194 #define W_VALUE         (0x0)
195 #define W_INDEX         (0x2)
196 #define W_LENGTH        (0x2)
197 
198 #define B_OVERRUN       (0x1<<6)
199 #define B_PARITY        (0x1<<5)
200 #define B_FRAMING       (0x1<<4)
201 #define B_RING_SIGNAL   (0x1<<3)
202 #define B_BREAK         (0x1<<2)
203 #define B_TX_CARRIER    (0x1<<1)
204 #define B_RX_CARRIER    (0x1<<0)
205 
206 struct hso_serial_state_notification {
207 	u8 bmRequestType;
208 	u8 bNotification;
209 	u16 wValue;
210 	u16 wIndex;
211 	u16 wLength;
212 	u16 UART_state_bitmap;
213 } __packed;
214 
215 struct hso_tiocmget {
216 	struct mutex mutex;
217 	wait_queue_head_t waitq;
218 	int    intr_completed;
219 	struct usb_endpoint_descriptor *endp;
220 	struct urb *urb;
221 	struct hso_serial_state_notification serial_state_notification;
222 	u16    prev_UART_state_bitmap;
223 	struct uart_icount icount;
224 };
225 
226 
227 struct hso_serial {
228 	struct hso_device *parent;
229 	int magic;
230 	u8 minor;
231 
232 	struct hso_shared_int *shared_int;
233 
234 	/* rx/tx urb could be either a bulk urb or a control urb depending
235 	   on which serial port it is used on. */
236 	struct urb *rx_urb[MAX_RX_URBS];
237 	u8 num_rx_urbs;
238 	u8 *rx_data[MAX_RX_URBS];
239 	u16 rx_data_length;	/* should contain allocated length */
240 
241 	struct urb *tx_urb;
242 	u8 *tx_data;
243 	u8 *tx_buffer;
244 	u16 tx_data_length;	/* should contain allocated length */
245 	u16 tx_data_count;
246 	u16 tx_buffer_count;
247 	struct usb_ctrlrequest ctrl_req_tx;
248 	struct usb_ctrlrequest ctrl_req_rx;
249 
250 	struct usb_endpoint_descriptor *in_endp;
251 	struct usb_endpoint_descriptor *out_endp;
252 
253 	enum rx_ctrl_state rx_state;
254 	u8 rts_state;
255 	u8 dtr_state;
256 	unsigned tx_urb_used:1;
257 
258 	/* from usb_serial_port */
259 	struct tty_struct *tty;
260 	int open_count;
261 	spinlock_t serial_lock;
262 
263 	int (*write_data) (struct hso_serial *serial);
264 	struct hso_tiocmget  *tiocmget;
265 	/* Hacks required to get flow control
266 	 * working on the serial receive buffers
267 	 * so as not to drop characters on the floor.
268 	 */
269 	int  curr_rx_urb_idx;
270 	u16  curr_rx_urb_offset;
271 	u8   rx_urb_filled[MAX_RX_URBS];
272 	struct tasklet_struct unthrottle_tasklet;
273 	struct work_struct    retry_unthrottle_workqueue;
274 };
275 
276 struct hso_device {
277 	union {
278 		struct hso_serial *dev_serial;
279 		struct hso_net *dev_net;
280 	} port_data;
281 
282 	u32 port_spec;
283 
284 	u8 is_active;
285 	u8 usb_gone;
286 	struct work_struct async_get_intf;
287 	struct work_struct async_put_intf;
288 	struct work_struct reset_device;
289 
290 	struct usb_device *usb;
291 	struct usb_interface *interface;
292 
293 	struct device *dev;
294 	struct kref ref;
295 	struct mutex mutex;
296 };
297 
298 /* Type of interface */
299 #define HSO_INTF_MASK		0xFF00
300 #define	HSO_INTF_MUX		0x0100
301 #define	HSO_INTF_BULK   	0x0200
302 
303 /* Type of port */
304 #define HSO_PORT_MASK		0xFF
305 #define HSO_PORT_NO_PORT	0x0
306 #define	HSO_PORT_CONTROL	0x1
307 #define	HSO_PORT_APP		0x2
308 #define	HSO_PORT_GPS		0x3
309 #define	HSO_PORT_PCSC		0x4
310 #define	HSO_PORT_APP2		0x5
311 #define HSO_PORT_GPS_CONTROL	0x6
312 #define HSO_PORT_MSD		0x7
313 #define HSO_PORT_VOICE		0x8
314 #define HSO_PORT_DIAG2		0x9
315 #define	HSO_PORT_DIAG		0x10
316 #define	HSO_PORT_MODEM		0x11
317 #define	HSO_PORT_NETWORK	0x12
318 
319 /* Additional device info */
320 #define HSO_INFO_MASK		0xFF000000
321 #define HSO_INFO_CRC_BUG	0x01000000
322 
323 /*****************************************************************************/
324 /* Prototypes                                                                */
325 /*****************************************************************************/
326 /* Serial driver functions */
327 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
328 			       unsigned int set, unsigned int clear);
329 static void ctrl_callback(struct urb *urb);
330 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
331 static void hso_kick_transmit(struct hso_serial *serial);
332 /* Helper functions */
333 static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
334 				   struct usb_device *usb, gfp_t gfp);
335 static void handle_usb_error(int status, const char *function,
336 			     struct hso_device *hso_dev);
337 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
338 						  int type, int dir);
339 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
340 static void hso_free_interface(struct usb_interface *intf);
341 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
342 static int hso_stop_serial_device(struct hso_device *hso_dev);
343 static int hso_start_net_device(struct hso_device *hso_dev);
344 static void hso_free_shared_int(struct hso_shared_int *shared_int);
345 static int hso_stop_net_device(struct hso_device *hso_dev);
346 static void hso_serial_ref_free(struct kref *ref);
347 static void hso_std_serial_read_bulk_callback(struct urb *urb);
348 static int hso_mux_serial_read(struct hso_serial *serial);
349 static void async_get_intf(struct work_struct *data);
350 static void async_put_intf(struct work_struct *data);
351 static int hso_put_activity(struct hso_device *hso_dev);
352 static int hso_get_activity(struct hso_device *hso_dev);
353 static void tiocmget_intr_callback(struct urb *urb);
354 static void reset_device(struct work_struct *data);
355 /*****************************************************************************/
356 /* Helping functions                                                         */
357 /*****************************************************************************/
358 
359 /* #define DEBUG */
360 
361 static inline struct hso_net *dev2net(struct hso_device *hso_dev)
362 {
363 	return hso_dev->port_data.dev_net;
364 }
365 
366 static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
367 {
368 	return hso_dev->port_data.dev_serial;
369 }
370 
371 /* Debugging functions */
372 #ifdef DEBUG
373 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
374 		     unsigned int len)
375 {
376 	static char name[255];
377 
378 	sprintf(name, "hso[%d:%s]", line_count, func_name);
379 	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
380 }
381 
382 #define DUMP(buf_, len_)	\
383 	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
384 
385 #define DUMP1(buf_, len_)			\
386 	do {					\
387 		if (0x01 & debug)		\
388 			DUMP(buf_, len_);	\
389 	} while (0)
390 #else
391 #define DUMP(buf_, len_)
392 #define DUMP1(buf_, len_)
393 #endif
394 
395 /* module parameters */
396 static int debug;
397 static int tty_major;
398 static int disable_net;
399 
400 /* driver info */
401 static const char driver_name[] = "hso";
402 static const char tty_filename[] = "ttyHS";
403 static const char *version = __FILE__ ": " MOD_AUTHOR;
404 /* the usb driver itself (registered in hso_init) */
405 static struct usb_driver hso_driver;
406 /* serial structures */
407 static struct tty_driver *tty_drv;
408 static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
409 static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
410 static spinlock_t serial_table_lock;
411 
412 static const s32 default_port_spec[] = {
413 	HSO_INTF_MUX | HSO_PORT_NETWORK,
414 	HSO_INTF_BULK | HSO_PORT_DIAG,
415 	HSO_INTF_BULK | HSO_PORT_MODEM,
416 	0
417 };
418 
419 static const s32 icon321_port_spec[] = {
420 	HSO_INTF_MUX | HSO_PORT_NETWORK,
421 	HSO_INTF_BULK | HSO_PORT_DIAG2,
422 	HSO_INTF_BULK | HSO_PORT_MODEM,
423 	HSO_INTF_BULK | HSO_PORT_DIAG,
424 	0
425 };
426 
427 #define default_port_device(vendor, product)	\
428 	USB_DEVICE(vendor, product),	\
429 		.driver_info = (kernel_ulong_t)default_port_spec
430 
431 #define icon321_port_device(vendor, product)	\
432 	USB_DEVICE(vendor, product),	\
433 		.driver_info = (kernel_ulong_t)icon321_port_spec
434 
435 /* list of devices we support */
436 static const struct usb_device_id hso_ids[] = {
437 	{default_port_device(0x0af0, 0x6711)},
438 	{default_port_device(0x0af0, 0x6731)},
439 	{default_port_device(0x0af0, 0x6751)},
440 	{default_port_device(0x0af0, 0x6771)},
441 	{default_port_device(0x0af0, 0x6791)},
442 	{default_port_device(0x0af0, 0x6811)},
443 	{default_port_device(0x0af0, 0x6911)},
444 	{default_port_device(0x0af0, 0x6951)},
445 	{default_port_device(0x0af0, 0x6971)},
446 	{default_port_device(0x0af0, 0x7011)},
447 	{default_port_device(0x0af0, 0x7031)},
448 	{default_port_device(0x0af0, 0x7051)},
449 	{default_port_device(0x0af0, 0x7071)},
450 	{default_port_device(0x0af0, 0x7111)},
451 	{default_port_device(0x0af0, 0x7211)},
452 	{default_port_device(0x0af0, 0x7251)},
453 	{default_port_device(0x0af0, 0x7271)},
454 	{default_port_device(0x0af0, 0x7311)},
455 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
456 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
457 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
458 	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
459 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
460 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
461 	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
462 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
463 	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
464 	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
465 	{USB_DEVICE(0x0af0, 0x7701)},
466 	{USB_DEVICE(0x0af0, 0x7706)},
467 	{USB_DEVICE(0x0af0, 0x7801)},
468 	{USB_DEVICE(0x0af0, 0x7901)},
469 	{USB_DEVICE(0x0af0, 0x7A01)},
470 	{USB_DEVICE(0x0af0, 0x7A05)},
471 	{USB_DEVICE(0x0af0, 0x8200)},
472 	{USB_DEVICE(0x0af0, 0x8201)},
473 	{USB_DEVICE(0x0af0, 0x8300)},
474 	{USB_DEVICE(0x0af0, 0x8302)},
475 	{USB_DEVICE(0x0af0, 0x8304)},
476 	{USB_DEVICE(0x0af0, 0x8400)},
477 	{USB_DEVICE(0x0af0, 0x8600)},
478 	{USB_DEVICE(0x0af0, 0x8800)},
479 	{USB_DEVICE(0x0af0, 0x8900)},
480 	{USB_DEVICE(0x0af0, 0x9000)},
481 	{USB_DEVICE(0x0af0, 0xd035)},
482 	{USB_DEVICE(0x0af0, 0xd055)},
483 	{USB_DEVICE(0x0af0, 0xd155)},
484 	{USB_DEVICE(0x0af0, 0xd255)},
485 	{USB_DEVICE(0x0af0, 0xd057)},
486 	{USB_DEVICE(0x0af0, 0xd157)},
487 	{USB_DEVICE(0x0af0, 0xd257)},
488 	{USB_DEVICE(0x0af0, 0xd357)},
489 	{USB_DEVICE(0x0af0, 0xd058)},
490 	{USB_DEVICE(0x0af0, 0xc100)},
491 	{}
492 };
493 MODULE_DEVICE_TABLE(usb, hso_ids);
494 
495 /* Sysfs attribute */
496 static ssize_t hso_sysfs_show_porttype(struct device *dev,
497 				       struct device_attribute *attr,
498 				       char *buf)
499 {
500 	struct hso_device *hso_dev = dev_get_drvdata(dev);
501 	char *port_name;
502 
503 	if (!hso_dev)
504 		return 0;
505 
506 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
507 	case HSO_PORT_CONTROL:
508 		port_name = "Control";
509 		break;
510 	case HSO_PORT_APP:
511 		port_name = "Application";
512 		break;
513 	case HSO_PORT_APP2:
514 		port_name = "Application2";
515 		break;
516 	case HSO_PORT_GPS:
517 		port_name = "GPS";
518 		break;
519 	case HSO_PORT_GPS_CONTROL:
520 		port_name = "GPS Control";
521 		break;
522 	case HSO_PORT_PCSC:
523 		port_name = "PCSC";
524 		break;
525 	case HSO_PORT_DIAG:
526 		port_name = "Diagnostic";
527 		break;
528 	case HSO_PORT_DIAG2:
529 		port_name = "Diagnostic2";
530 		break;
531 	case HSO_PORT_MODEM:
532 		port_name = "Modem";
533 		break;
534 	case HSO_PORT_NETWORK:
535 		port_name = "Network";
536 		break;
537 	default:
538 		port_name = "Unknown";
539 		break;
540 	}
541 
542 	return sprintf(buf, "%s\n", port_name);
543 }
544 static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
545 
546 static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
547 {
548 	int idx;
549 
550 	for (idx = 0; idx < serial->num_rx_urbs; idx++)
551 		if (serial->rx_urb[idx] == urb)
552 			return idx;
553 	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
554 	return -1;
555 }
556 
557 /* converts mux value to a port spec value */
558 static u32 hso_mux_to_port(int mux)
559 {
560 	u32 result;
561 
562 	switch (mux) {
563 	case 0x1:
564 		result = HSO_PORT_CONTROL;
565 		break;
566 	case 0x2:
567 		result = HSO_PORT_APP;
568 		break;
569 	case 0x4:
570 		result = HSO_PORT_PCSC;
571 		break;
572 	case 0x8:
573 		result = HSO_PORT_GPS;
574 		break;
575 	case 0x10:
576 		result = HSO_PORT_APP2;
577 		break;
578 	default:
579 		result = HSO_PORT_NO_PORT;
580 	}
581 	return result;
582 }
583 
584 /* converts port spec value to a mux value */
585 static u32 hso_port_to_mux(int port)
586 {
587 	u32 result;
588 
589 	switch (port & HSO_PORT_MASK) {
590 	case HSO_PORT_CONTROL:
591 		result = 0x0;
592 		break;
593 	case HSO_PORT_APP:
594 		result = 0x1;
595 		break;
596 	case HSO_PORT_PCSC:
597 		result = 0x2;
598 		break;
599 	case HSO_PORT_GPS:
600 		result = 0x3;
601 		break;
602 	case HSO_PORT_APP2:
603 		result = 0x4;
604 		break;
605 	default:
606 		result = 0x0;
607 	}
608 	return result;
609 }
610 
611 static struct hso_serial *get_serial_by_shared_int_and_type(
612 					struct hso_shared_int *shared_int,
613 					int mux)
614 {
615 	int i, port;
616 
617 	port = hso_mux_to_port(mux);
618 
619 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
620 		if (serial_table[i] &&
621 		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
622 		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
623 			return dev2ser(serial_table[i]);
624 		}
625 	}
626 
627 	return NULL;
628 }
629 
630 static struct hso_serial *get_serial_by_index(unsigned index)
631 {
632 	struct hso_serial *serial = NULL;
633 	unsigned long flags;
634 
635 	spin_lock_irqsave(&serial_table_lock, flags);
636 	if (serial_table[index])
637 		serial = dev2ser(serial_table[index]);
638 	spin_unlock_irqrestore(&serial_table_lock, flags);
639 
640 	return serial;
641 }
642 
643 static int get_free_serial_index(void)
644 {
645 	int index;
646 	unsigned long flags;
647 
648 	spin_lock_irqsave(&serial_table_lock, flags);
649 	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
650 		if (serial_table[index] == NULL) {
651 			spin_unlock_irqrestore(&serial_table_lock, flags);
652 			return index;
653 		}
654 	}
655 	spin_unlock_irqrestore(&serial_table_lock, flags);
656 
657 	printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
658 	return -1;
659 }
660 
661 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
662 {
663 	unsigned long flags;
664 
665 	spin_lock_irqsave(&serial_table_lock, flags);
666 	if (serial)
667 		serial_table[index] = serial->parent;
668 	else
669 		serial_table[index] = NULL;
670 	spin_unlock_irqrestore(&serial_table_lock, flags);
671 }
672 
673 static void handle_usb_error(int status, const char *function,
674 			     struct hso_device *hso_dev)
675 {
676 	char *explanation;
677 
678 	switch (status) {
679 	case -ENODEV:
680 		explanation = "no device";
681 		break;
682 	case -ENOENT:
683 		explanation = "endpoint not enabled";
684 		break;
685 	case -EPIPE:
686 		explanation = "endpoint stalled";
687 		break;
688 	case -ENOSPC:
689 		explanation = "not enough bandwidth";
690 		break;
691 	case -ESHUTDOWN:
692 		explanation = "device disabled";
693 		break;
694 	case -EHOSTUNREACH:
695 		explanation = "device suspended";
696 		break;
697 	case -EINVAL:
698 	case -EAGAIN:
699 	case -EFBIG:
700 	case -EMSGSIZE:
701 		explanation = "internal error";
702 		break;
703 	case -EILSEQ:
704 	case -EPROTO:
705 	case -ETIME:
706 	case -ETIMEDOUT:
707 		explanation = "protocol error";
708 		if (hso_dev)
709 			schedule_work(&hso_dev->reset_device);
710 		break;
711 	default:
712 		explanation = "unknown status";
713 		break;
714 	}
715 
716 	/* log a meaningful explanation of an USB status */
717 	D1("%s: received USB status - %s (%d)", function, explanation, status);
718 }
719 
720 /* Network interface functions */
721 
722 /* called when net interface is brought up by ifconfig */
723 static int hso_net_open(struct net_device *net)
724 {
725 	struct hso_net *odev = netdev_priv(net);
726 	unsigned long flags = 0;
727 
728 	if (!odev) {
729 		dev_err(&net->dev, "No net device !\n");
730 		return -ENODEV;
731 	}
732 
733 	odev->skb_tx_buf = NULL;
734 
735 	/* setup environment */
736 	spin_lock_irqsave(&odev->net_lock, flags);
737 	odev->rx_parse_state = WAIT_IP;
738 	odev->rx_buf_size = 0;
739 	odev->rx_buf_missing = sizeof(struct iphdr);
740 	spin_unlock_irqrestore(&odev->net_lock, flags);
741 
742 	/* We are up and running. */
743 	set_bit(HSO_NET_RUNNING, &odev->flags);
744 	hso_start_net_device(odev->parent);
745 
746 	/* Tell the kernel we are ready to start receiving from it */
747 	netif_start_queue(net);
748 
749 	return 0;
750 }
751 
752 /* called when interface is brought down by ifconfig */
753 static int hso_net_close(struct net_device *net)
754 {
755 	struct hso_net *odev = netdev_priv(net);
756 
757 	/* we don't need the queue anymore */
758 	netif_stop_queue(net);
759 	/* no longer running */
760 	clear_bit(HSO_NET_RUNNING, &odev->flags);
761 
762 	hso_stop_net_device(odev->parent);
763 
764 	/* done */
765 	return 0;
766 }
767 
768 /* USB tells is xmit done, we should start the netqueue again */
769 static void write_bulk_callback(struct urb *urb)
770 {
771 	struct hso_net *odev = urb->context;
772 	int status = urb->status;
773 
774 	/* Sanity check */
775 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
776 		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
777 		return;
778 	}
779 
780 	/* Do we still have a valid kernel network device? */
781 	if (!netif_device_present(odev->net)) {
782 		dev_err(&urb->dev->dev, "%s: net device not present\n",
783 			__func__);
784 		return;
785 	}
786 
787 	/* log status, but don't act on it, we don't need to resubmit anything
788 	 * anyhow */
789 	if (status)
790 		handle_usb_error(status, __func__, odev->parent);
791 
792 	hso_put_activity(odev->parent);
793 
794 	/* Tell the network interface we are ready for another frame */
795 	netif_wake_queue(odev->net);
796 }
797 
798 /* called by kernel when we need to transmit a packet */
799 static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
800 					    struct net_device *net)
801 {
802 	struct hso_net *odev = netdev_priv(net);
803 	int result;
804 
805 	/* Tell the kernel, "No more frames 'til we are done with this one." */
806 	netif_stop_queue(net);
807 	if (hso_get_activity(odev->parent) == -EAGAIN) {
808 		odev->skb_tx_buf = skb;
809 		return NETDEV_TX_OK;
810 	}
811 
812 	/* log if asked */
813 	DUMP1(skb->data, skb->len);
814 	/* Copy it from kernel memory to OUR memory */
815 	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
816 	D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
817 
818 	/* Fill in the URB for shipping it out. */
819 	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
820 			  odev->parent->usb,
821 			  usb_sndbulkpipe(odev->parent->usb,
822 					  odev->out_endp->
823 					  bEndpointAddress & 0x7F),
824 			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
825 			  odev);
826 
827 	/* Deal with the Zero Length packet problem, I hope */
828 	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
829 
830 	/* Send the URB on its merry way. */
831 	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
832 	if (result) {
833 		dev_warn(&odev->parent->interface->dev,
834 			"failed mux_bulk_tx_urb %d\n", result);
835 		net->stats.tx_errors++;
836 		netif_start_queue(net);
837 	} else {
838 		net->stats.tx_packets++;
839 		net->stats.tx_bytes += skb->len;
840 	}
841 	dev_kfree_skb(skb);
842 	/* we're done */
843 	return NETDEV_TX_OK;
844 }
845 
846 static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
847 {
848 	struct hso_net *odev = netdev_priv(net);
849 
850 	strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
851 	usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info);
852 }
853 
854 static const struct ethtool_ops ops = {
855 	.get_drvinfo = hso_get_drvinfo,
856 	.get_link = ethtool_op_get_link
857 };
858 
859 /* called when a packet did not ack after watchdogtimeout */
860 static void hso_net_tx_timeout(struct net_device *net)
861 {
862 	struct hso_net *odev = netdev_priv(net);
863 
864 	if (!odev)
865 		return;
866 
867 	/* Tell syslog we are hosed. */
868 	dev_warn(&net->dev, "Tx timed out.\n");
869 
870 	/* Tear the waiting frame off the list */
871 	if (odev->mux_bulk_tx_urb &&
872 	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
873 		usb_unlink_urb(odev->mux_bulk_tx_urb);
874 
875 	/* Update statistics */
876 	net->stats.tx_errors++;
877 }
878 
879 /* make a real packet from the received USB buffer */
880 static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
881 			unsigned int count, unsigned char is_eop)
882 {
883 	unsigned short temp_bytes;
884 	unsigned short buffer_offset = 0;
885 	unsigned short frame_len;
886 	unsigned char *tmp_rx_buf;
887 
888 	/* log if needed */
889 	D1("Rx %d bytes", count);
890 	DUMP(ip_pkt, min(128, (int)count));
891 
892 	while (count) {
893 		switch (odev->rx_parse_state) {
894 		case WAIT_IP:
895 			/* waiting for IP header. */
896 			/* wanted bytes - size of ip header */
897 			temp_bytes =
898 			    (count <
899 			     odev->rx_buf_missing) ? count : odev->
900 			    rx_buf_missing;
901 
902 			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
903 			       odev->rx_buf_size, ip_pkt + buffer_offset,
904 			       temp_bytes);
905 
906 			odev->rx_buf_size += temp_bytes;
907 			buffer_offset += temp_bytes;
908 			odev->rx_buf_missing -= temp_bytes;
909 			count -= temp_bytes;
910 
911 			if (!odev->rx_buf_missing) {
912 				/* header is complete allocate an sk_buffer and
913 				 * continue to WAIT_DATA */
914 				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
915 
916 				if ((frame_len > DEFAULT_MRU) ||
917 				    (frame_len < sizeof(struct iphdr))) {
918 					dev_err(&odev->net->dev,
919 						"Invalid frame (%d) length\n",
920 						frame_len);
921 					odev->rx_parse_state = WAIT_SYNC;
922 					continue;
923 				}
924 				/* Allocate an sk_buff */
925 				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
926 								    frame_len);
927 				if (!odev->skb_rx_buf) {
928 					/* We got no receive buffer. */
929 					D1("could not allocate memory");
930 					odev->rx_parse_state = WAIT_SYNC;
931 					return;
932 				}
933 
934 				/* Copy what we got so far. make room for iphdr
935 				 * after tail. */
936 				tmp_rx_buf =
937 				    skb_put(odev->skb_rx_buf,
938 					    sizeof(struct iphdr));
939 				memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
940 				       sizeof(struct iphdr));
941 
942 				/* ETH_HLEN */
943 				odev->rx_buf_size = sizeof(struct iphdr);
944 
945 				/* Filip actually use .tot_len */
946 				odev->rx_buf_missing =
947 				    frame_len - sizeof(struct iphdr);
948 				odev->rx_parse_state = WAIT_DATA;
949 			}
950 			break;
951 
952 		case WAIT_DATA:
953 			temp_bytes = (count < odev->rx_buf_missing)
954 					? count : odev->rx_buf_missing;
955 
956 			/* Copy the rest of the bytes that are left in the
957 			 * buffer into the waiting sk_buf. */
958 			/* Make room for temp_bytes after tail. */
959 			tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
960 			memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
961 
962 			odev->rx_buf_missing -= temp_bytes;
963 			count -= temp_bytes;
964 			buffer_offset += temp_bytes;
965 			odev->rx_buf_size += temp_bytes;
966 			if (!odev->rx_buf_missing) {
967 				/* Packet is complete. Inject into stack. */
968 				/* We have IP packet here */
969 				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
970 				/* don't check it */
971 				odev->skb_rx_buf->ip_summed =
972 					CHECKSUM_UNNECESSARY;
973 
974 				skb_reset_mac_header(odev->skb_rx_buf);
975 
976 				/* Ship it off to the kernel */
977 				netif_rx(odev->skb_rx_buf);
978 				/* No longer our buffer. */
979 				odev->skb_rx_buf = NULL;
980 
981 				/* update out statistics */
982 				odev->net->stats.rx_packets++;
983 
984 				odev->net->stats.rx_bytes += odev->rx_buf_size;
985 
986 				odev->rx_buf_size = 0;
987 				odev->rx_buf_missing = sizeof(struct iphdr);
988 				odev->rx_parse_state = WAIT_IP;
989 			}
990 			break;
991 
992 		case WAIT_SYNC:
993 			D1(" W_S");
994 			count = 0;
995 			break;
996 		default:
997 			D1(" ");
998 			count--;
999 			break;
1000 		}
1001 	}
1002 
1003 	/* Recovery mechanism for WAIT_SYNC state. */
1004 	if (is_eop) {
1005 		if (odev->rx_parse_state == WAIT_SYNC) {
1006 			odev->rx_parse_state = WAIT_IP;
1007 			odev->rx_buf_size = 0;
1008 			odev->rx_buf_missing = sizeof(struct iphdr);
1009 		}
1010 	}
1011 }
1012 
1013 /* Moving data from usb to kernel (in interrupt state) */
1014 static void read_bulk_callback(struct urb *urb)
1015 {
1016 	struct hso_net *odev = urb->context;
1017 	struct net_device *net;
1018 	int result;
1019 	int status = urb->status;
1020 
1021 	/* is al ok?  (Filip: Who's Al ?) */
1022 	if (status) {
1023 		handle_usb_error(status, __func__, odev->parent);
1024 		return;
1025 	}
1026 
1027 	/* Sanity check */
1028 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
1029 		D1("BULK IN callback but driver is not active!");
1030 		return;
1031 	}
1032 	usb_mark_last_busy(urb->dev);
1033 
1034 	net = odev->net;
1035 
1036 	if (!netif_device_present(net)) {
1037 		/* Somebody killed our network interface... */
1038 		return;
1039 	}
1040 
1041 	if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
1042 		u32 rest;
1043 		u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1044 		rest = urb->actual_length %
1045 			le16_to_cpu(odev->in_endp->wMaxPacketSize);
1046 		if (((rest == 5) || (rest == 6)) &&
1047 		    !memcmp(((u8 *) urb->transfer_buffer) +
1048 			    urb->actual_length - 4, crc_check, 4)) {
1049 			urb->actual_length -= 4;
1050 		}
1051 	}
1052 
1053 	/* do we even have a packet? */
1054 	if (urb->actual_length) {
1055 		/* Handle the IP stream, add header and push it onto network
1056 		 * stack if the packet is complete. */
1057 		spin_lock(&odev->net_lock);
1058 		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
1059 			    (urb->transfer_buffer_length >
1060 			     urb->actual_length) ? 1 : 0);
1061 		spin_unlock(&odev->net_lock);
1062 	}
1063 
1064 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1065 	 * another frame. Reuse same as received. */
1066 	usb_fill_bulk_urb(urb,
1067 			  odev->parent->usb,
1068 			  usb_rcvbulkpipe(odev->parent->usb,
1069 					  odev->in_endp->
1070 					  bEndpointAddress & 0x7F),
1071 			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
1072 			  read_bulk_callback, odev);
1073 
1074 	/* Give this to the USB subsystem so it can tell us when more data
1075 	 * arrives. */
1076 	result = usb_submit_urb(urb, GFP_ATOMIC);
1077 	if (result)
1078 		dev_warn(&odev->parent->interface->dev,
1079 			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
1080 			 result);
1081 }
1082 
1083 /* Serial driver functions */
1084 
1085 static void hso_init_termios(struct ktermios *termios)
1086 {
1087 	/*
1088 	 * The default requirements for this device are:
1089 	 */
1090 	termios->c_iflag &=
1091 		~(IGNBRK	/* disable ignore break */
1092 		| BRKINT	/* disable break causes interrupt */
1093 		| PARMRK	/* disable mark parity errors */
1094 		| ISTRIP	/* disable clear high bit of input characters */
1095 		| INLCR		/* disable translate NL to CR */
1096 		| IGNCR		/* disable ignore CR */
1097 		| ICRNL		/* disable translate CR to NL */
1098 		| IXON);	/* disable enable XON/XOFF flow control */
1099 
1100 	/* disable postprocess output characters */
1101 	termios->c_oflag &= ~OPOST;
1102 
1103 	termios->c_lflag &=
1104 		~(ECHO		/* disable echo input characters */
1105 		| ECHONL	/* disable echo new line */
1106 		| ICANON	/* disable erase, kill, werase, and rprnt
1107 				   special characters */
1108 		| ISIG		/* disable interrupt, quit, and suspend special
1109 				   characters */
1110 		| IEXTEN);	/* disable non-POSIX special characters */
1111 
1112 	termios->c_cflag &=
1113 		~(CSIZE		/* no size */
1114 		| PARENB	/* disable parity bit */
1115 		| CBAUD		/* clear current baud rate */
1116 		| CBAUDEX);	/* clear current buad rate */
1117 
1118 	termios->c_cflag |= CS8;	/* character size 8 bits */
1119 
1120 	/* baud rate 115200 */
1121 	tty_termios_encode_baud_rate(termios, 115200, 115200);
1122 }
1123 
1124 static void _hso_serial_set_termios(struct tty_struct *tty,
1125 				    struct ktermios *old)
1126 {
1127 	struct hso_serial *serial = get_serial_by_tty(tty);
1128 	struct ktermios *termios;
1129 
1130 	if (!serial) {
1131 		printk(KERN_ERR "%s: no tty structures", __func__);
1132 		return;
1133 	}
1134 
1135 	D4("port %d", serial->minor);
1136 
1137 	/*
1138 	 *	Fix up unsupported bits
1139 	 */
1140 	termios = tty->termios;
1141 	termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
1142 
1143 	termios->c_cflag &=
1144 		~(CSIZE		/* no size */
1145 		| PARENB	/* disable parity bit */
1146 		| CBAUD		/* clear current baud rate */
1147 		| CBAUDEX);	/* clear current buad rate */
1148 
1149 	termios->c_cflag |= CS8;	/* character size 8 bits */
1150 
1151 	/* baud rate 115200 */
1152 	tty_encode_baud_rate(tty, 115200, 115200);
1153 }
1154 
1155 static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
1156 {
1157 	int result;
1158 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1159 	 * another frame */
1160 	usb_fill_bulk_urb(urb, serial->parent->usb,
1161 			  usb_rcvbulkpipe(serial->parent->usb,
1162 					  serial->in_endp->
1163 					  bEndpointAddress & 0x7F),
1164 			  urb->transfer_buffer, serial->rx_data_length,
1165 			  hso_std_serial_read_bulk_callback, serial);
1166 	/* Give this to the USB subsystem so it can tell us when more data
1167 	 * arrives. */
1168 	result = usb_submit_urb(urb, GFP_ATOMIC);
1169 	if (result) {
1170 		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
1171 			__func__, result);
1172 	}
1173 }
1174 
1175 
1176 
1177 
1178 static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
1179 {
1180 	int count;
1181 	struct urb *curr_urb;
1182 
1183 	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
1184 		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
1185 		count = put_rxbuf_data(curr_urb, serial);
1186 		if (count == -1)
1187 			return;
1188 		if (count == 0) {
1189 			serial->curr_rx_urb_idx++;
1190 			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
1191 				serial->curr_rx_urb_idx = 0;
1192 			hso_resubmit_rx_bulk_urb(serial, curr_urb);
1193 		}
1194 	}
1195 }
1196 
1197 static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
1198 {
1199 	int count = 0;
1200 	struct urb *urb;
1201 
1202 	urb = serial->rx_urb[0];
1203 	if (serial->open_count > 0) {
1204 		count = put_rxbuf_data(urb, serial);
1205 		if (count == -1)
1206 			return;
1207 	}
1208 	/* Re issue a read as long as we receive data. */
1209 
1210 	if (count == 0 && ((urb->actual_length != 0) ||
1211 			   (serial->rx_state == RX_PENDING))) {
1212 		serial->rx_state = RX_SENT;
1213 		hso_mux_serial_read(serial);
1214 	} else
1215 		serial->rx_state = RX_IDLE;
1216 }
1217 
1218 
1219 /* read callback for Diag and CS port */
1220 static void hso_std_serial_read_bulk_callback(struct urb *urb)
1221 {
1222 	struct hso_serial *serial = urb->context;
1223 	int status = urb->status;
1224 
1225 	/* sanity check */
1226 	if (!serial) {
1227 		D1("serial == NULL");
1228 		return;
1229 	} else if (status) {
1230 		handle_usb_error(status, __func__, serial->parent);
1231 		return;
1232 	}
1233 
1234 	D4("\n--- Got serial_read_bulk callback %02x ---", status);
1235 	D1("Actual length = %d\n", urb->actual_length);
1236 	DUMP1(urb->transfer_buffer, urb->actual_length);
1237 
1238 	/* Anyone listening? */
1239 	if (serial->open_count == 0)
1240 		return;
1241 
1242 	if (status == 0) {
1243 		if (serial->parent->port_spec & HSO_INFO_CRC_BUG) {
1244 			u32 rest;
1245 			u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1246 			rest =
1247 			    urb->actual_length %
1248 			    le16_to_cpu(serial->in_endp->wMaxPacketSize);
1249 			if (((rest == 5) || (rest == 6)) &&
1250 			    !memcmp(((u8 *) urb->transfer_buffer) +
1251 				    urb->actual_length - 4, crc_check, 4)) {
1252 				urb->actual_length -= 4;
1253 			}
1254 		}
1255 		/* Valid data, handle RX data */
1256 		spin_lock(&serial->serial_lock);
1257 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
1258 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1259 		spin_unlock(&serial->serial_lock);
1260 	} else if (status == -ENOENT || status == -ECONNRESET) {
1261 		/* Unlinked - check for throttled port. */
1262 		D2("Port %d, successfully unlinked urb", serial->minor);
1263 		spin_lock(&serial->serial_lock);
1264 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
1265 		hso_resubmit_rx_bulk_urb(serial, urb);
1266 		spin_unlock(&serial->serial_lock);
1267 	} else {
1268 		D2("Port %d, status = %d for read urb", serial->minor, status);
1269 		return;
1270 	}
1271 }
1272 
1273 /*
1274  * This needs to be a tasklet otherwise we will
1275  * end up recursively calling this function.
1276  */
1277 static void hso_unthrottle_tasklet(struct hso_serial *serial)
1278 {
1279 	unsigned long flags;
1280 
1281 	spin_lock_irqsave(&serial->serial_lock, flags);
1282 	if ((serial->parent->port_spec & HSO_INTF_MUX))
1283 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
1284 	else
1285 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1286 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1287 }
1288 
1289 static	void hso_unthrottle(struct tty_struct *tty)
1290 {
1291 	struct hso_serial *serial = get_serial_by_tty(tty);
1292 
1293 	tasklet_hi_schedule(&serial->unthrottle_tasklet);
1294 }
1295 
1296 static void hso_unthrottle_workfunc(struct work_struct *work)
1297 {
1298 	struct hso_serial *serial =
1299 	    container_of(work, struct hso_serial,
1300 			 retry_unthrottle_workqueue);
1301 	hso_unthrottle_tasklet(serial);
1302 }
1303 
1304 /* open the requested serial port */
1305 static int hso_serial_open(struct tty_struct *tty, struct file *filp)
1306 {
1307 	struct hso_serial *serial = get_serial_by_index(tty->index);
1308 	int result;
1309 
1310 	/* sanity check */
1311 	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
1312 		WARN_ON(1);
1313 		tty->driver_data = NULL;
1314 		D1("Failed to open port");
1315 		return -ENODEV;
1316 	}
1317 
1318 	mutex_lock(&serial->parent->mutex);
1319 	result = usb_autopm_get_interface(serial->parent->interface);
1320 	if (result < 0)
1321 		goto err_out;
1322 
1323 	D1("Opening %d", serial->minor);
1324 	kref_get(&serial->parent->ref);
1325 
1326 	/* setup */
1327 	spin_lock_irq(&serial->serial_lock);
1328 	tty->driver_data = serial;
1329 	tty_kref_put(serial->tty);
1330 	serial->tty = tty_kref_get(tty);
1331 	spin_unlock_irq(&serial->serial_lock);
1332 
1333 	/* check for port already opened, if not set the termios */
1334 	serial->open_count++;
1335 	if (serial->open_count == 1) {
1336 		serial->rx_state = RX_IDLE;
1337 		/* Force default termio settings */
1338 		_hso_serial_set_termios(tty, NULL);
1339 		tasklet_init(&serial->unthrottle_tasklet,
1340 			     (void (*)(unsigned long))hso_unthrottle_tasklet,
1341 			     (unsigned long)serial);
1342 		INIT_WORK(&serial->retry_unthrottle_workqueue,
1343 			  hso_unthrottle_workfunc);
1344 		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
1345 		if (result) {
1346 			hso_stop_serial_device(serial->parent);
1347 			serial->open_count--;
1348 			kref_put(&serial->parent->ref, hso_serial_ref_free);
1349 		}
1350 	} else {
1351 		D1("Port was already open");
1352 	}
1353 
1354 	usb_autopm_put_interface(serial->parent->interface);
1355 
1356 	/* done */
1357 	if (result)
1358 		hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
1359 err_out:
1360 	mutex_unlock(&serial->parent->mutex);
1361 	return result;
1362 }
1363 
1364 /* close the requested serial port */
1365 static void hso_serial_close(struct tty_struct *tty, struct file *filp)
1366 {
1367 	struct hso_serial *serial = tty->driver_data;
1368 	u8 usb_gone;
1369 
1370 	D1("Closing serial port");
1371 
1372 	/* Open failed, no close cleanup required */
1373 	if (serial == NULL)
1374 		return;
1375 
1376 	mutex_lock(&serial->parent->mutex);
1377 	usb_gone = serial->parent->usb_gone;
1378 
1379 	if (!usb_gone)
1380 		usb_autopm_get_interface(serial->parent->interface);
1381 
1382 	/* reset the rts and dtr */
1383 	/* do the actual close */
1384 	serial->open_count--;
1385 
1386 	if (serial->open_count <= 0) {
1387 		serial->open_count = 0;
1388 		spin_lock_irq(&serial->serial_lock);
1389 		if (serial->tty == tty) {
1390 			serial->tty->driver_data = NULL;
1391 			serial->tty = NULL;
1392 			tty_kref_put(tty);
1393 		}
1394 		spin_unlock_irq(&serial->serial_lock);
1395 		if (!usb_gone)
1396 			hso_stop_serial_device(serial->parent);
1397 		tasklet_kill(&serial->unthrottle_tasklet);
1398 		cancel_work_sync(&serial->retry_unthrottle_workqueue);
1399 	}
1400 
1401 	if (!usb_gone)
1402 		usb_autopm_put_interface(serial->parent->interface);
1403 
1404 	mutex_unlock(&serial->parent->mutex);
1405 
1406 	kref_put(&serial->parent->ref, hso_serial_ref_free);
1407 }
1408 
1409 /* close the requested serial port */
1410 static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
1411 			    int count)
1412 {
1413 	struct hso_serial *serial = get_serial_by_tty(tty);
1414 	int space, tx_bytes;
1415 	unsigned long flags;
1416 
1417 	/* sanity check */
1418 	if (serial == NULL) {
1419 		printk(KERN_ERR "%s: serial is NULL\n", __func__);
1420 		return -ENODEV;
1421 	}
1422 
1423 	spin_lock_irqsave(&serial->serial_lock, flags);
1424 
1425 	space = serial->tx_data_length - serial->tx_buffer_count;
1426 	tx_bytes = (count < space) ? count : space;
1427 
1428 	if (!tx_bytes)
1429 		goto out;
1430 
1431 	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
1432 	serial->tx_buffer_count += tx_bytes;
1433 
1434 out:
1435 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1436 
1437 	hso_kick_transmit(serial);
1438 	/* done */
1439 	return tx_bytes;
1440 }
1441 
1442 /* how much room is there for writing */
1443 static int hso_serial_write_room(struct tty_struct *tty)
1444 {
1445 	struct hso_serial *serial = get_serial_by_tty(tty);
1446 	int room;
1447 	unsigned long flags;
1448 
1449 	spin_lock_irqsave(&serial->serial_lock, flags);
1450 	room = serial->tx_data_length - serial->tx_buffer_count;
1451 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1452 
1453 	/* return free room */
1454 	return room;
1455 }
1456 
1457 /* setup the term */
1458 static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
1459 {
1460 	struct hso_serial *serial = get_serial_by_tty(tty);
1461 	unsigned long flags;
1462 
1463 	if (old)
1464 		D5("Termios called with: cflags new[%d] - old[%d]",
1465 		   tty->termios->c_cflag, old->c_cflag);
1466 
1467 	/* the actual setup */
1468 	spin_lock_irqsave(&serial->serial_lock, flags);
1469 	if (serial->open_count)
1470 		_hso_serial_set_termios(tty, old);
1471 	else
1472 		tty->termios = old;
1473 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1474 
1475 	/* done */
1476 }
1477 
1478 /* how many characters in the buffer */
1479 static int hso_serial_chars_in_buffer(struct tty_struct *tty)
1480 {
1481 	struct hso_serial *serial = get_serial_by_tty(tty);
1482 	int chars;
1483 	unsigned long flags;
1484 
1485 	/* sanity check */
1486 	if (serial == NULL)
1487 		return 0;
1488 
1489 	spin_lock_irqsave(&serial->serial_lock, flags);
1490 	chars = serial->tx_buffer_count;
1491 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1492 
1493 	return chars;
1494 }
1495 static int tiocmget_submit_urb(struct hso_serial *serial,
1496 			       struct hso_tiocmget *tiocmget,
1497 			       struct usb_device *usb)
1498 {
1499 	int result;
1500 
1501 	if (serial->parent->usb_gone)
1502 		return -ENODEV;
1503 	usb_fill_int_urb(tiocmget->urb, usb,
1504 			 usb_rcvintpipe(usb,
1505 					tiocmget->endp->
1506 					bEndpointAddress & 0x7F),
1507 			 &tiocmget->serial_state_notification,
1508 			 sizeof(struct hso_serial_state_notification),
1509 			 tiocmget_intr_callback, serial,
1510 			 tiocmget->endp->bInterval);
1511 	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
1512 	if (result) {
1513 		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
1514 			 result);
1515 	}
1516 	return result;
1517 
1518 }
1519 
1520 static void tiocmget_intr_callback(struct urb *urb)
1521 {
1522 	struct hso_serial *serial = urb->context;
1523 	struct hso_tiocmget *tiocmget;
1524 	int status = urb->status;
1525 	u16 UART_state_bitmap, prev_UART_state_bitmap;
1526 	struct uart_icount *icount;
1527 	struct hso_serial_state_notification *serial_state_notification;
1528 	struct usb_device *usb;
1529 
1530 	/* Sanity checks */
1531 	if (!serial)
1532 		return;
1533 	if (status) {
1534 		handle_usb_error(status, __func__, serial->parent);
1535 		return;
1536 	}
1537 	tiocmget = serial->tiocmget;
1538 	if (!tiocmget)
1539 		return;
1540 	usb = serial->parent->usb;
1541 	serial_state_notification = &tiocmget->serial_state_notification;
1542 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
1543 	    serial_state_notification->bNotification != B_NOTIFICATION ||
1544 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
1545 	    le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
1546 	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
1547 		dev_warn(&usb->dev,
1548 			 "hso received invalid serial state notification\n");
1549 		DUMP(serial_state_notification,
1550 		     sizeof(struct hso_serial_state_notification));
1551 	} else {
1552 
1553 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
1554 						UART_state_bitmap);
1555 		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
1556 		icount = &tiocmget->icount;
1557 		spin_lock(&serial->serial_lock);
1558 		if ((UART_state_bitmap & B_OVERRUN) !=
1559 		   (prev_UART_state_bitmap & B_OVERRUN))
1560 			icount->parity++;
1561 		if ((UART_state_bitmap & B_PARITY) !=
1562 		   (prev_UART_state_bitmap & B_PARITY))
1563 			icount->parity++;
1564 		if ((UART_state_bitmap & B_FRAMING) !=
1565 		   (prev_UART_state_bitmap & B_FRAMING))
1566 			icount->frame++;
1567 		if ((UART_state_bitmap & B_RING_SIGNAL) &&
1568 		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
1569 			icount->rng++;
1570 		if ((UART_state_bitmap & B_BREAK) !=
1571 		   (prev_UART_state_bitmap & B_BREAK))
1572 			icount->brk++;
1573 		if ((UART_state_bitmap & B_TX_CARRIER) !=
1574 		   (prev_UART_state_bitmap & B_TX_CARRIER))
1575 			icount->dsr++;
1576 		if ((UART_state_bitmap & B_RX_CARRIER) !=
1577 		   (prev_UART_state_bitmap & B_RX_CARRIER))
1578 			icount->dcd++;
1579 		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
1580 		spin_unlock(&serial->serial_lock);
1581 		tiocmget->intr_completed = 1;
1582 		wake_up_interruptible(&tiocmget->waitq);
1583 	}
1584 	memset(serial_state_notification, 0,
1585 	       sizeof(struct hso_serial_state_notification));
1586 	tiocmget_submit_urb(serial,
1587 			    tiocmget,
1588 			    serial->parent->usb);
1589 }
1590 
1591 /*
1592  * next few functions largely stolen from drivers/serial/serial_core.c
1593  */
1594 /* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1595  * - mask passed in arg for lines of interest
1596  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1597  * Caller should use TIOCGICOUNT to see which one it was
1598  */
1599 static int
1600 hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
1601 {
1602 	DECLARE_WAITQUEUE(wait, current);
1603 	struct uart_icount cprev, cnow;
1604 	struct hso_tiocmget  *tiocmget;
1605 	int ret;
1606 
1607 	tiocmget = serial->tiocmget;
1608 	if (!tiocmget)
1609 		return -ENOENT;
1610 	/*
1611 	 * note the counters on entry
1612 	 */
1613 	spin_lock_irq(&serial->serial_lock);
1614 	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
1615 	spin_unlock_irq(&serial->serial_lock);
1616 	add_wait_queue(&tiocmget->waitq, &wait);
1617 	for (;;) {
1618 		spin_lock_irq(&serial->serial_lock);
1619 		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1620 		spin_unlock_irq(&serial->serial_lock);
1621 		set_current_state(TASK_INTERRUPTIBLE);
1622 		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1623 		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1624 		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
1625 			ret = 0;
1626 			break;
1627 		}
1628 		schedule();
1629 		/* see if a signal did it */
1630 		if (signal_pending(current)) {
1631 			ret = -ERESTARTSYS;
1632 			break;
1633 		}
1634 		cprev = cnow;
1635 	}
1636 	current->state = TASK_RUNNING;
1637 	remove_wait_queue(&tiocmget->waitq, &wait);
1638 
1639 	return ret;
1640 }
1641 
1642 /*
1643  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1644  * Return: write counters to the user passed counter struct
1645  * NB: both 1->0 and 0->1 transitions are counted except for
1646  *     RI where only 0->1 is counted.
1647  */
1648 static int hso_get_count(struct hso_serial *serial,
1649 			  struct serial_icounter_struct __user *icnt)
1650 {
1651 	struct serial_icounter_struct icount;
1652 	struct uart_icount cnow;
1653 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
1654 
1655 	memset(&icount, 0, sizeof(struct serial_icounter_struct));
1656 
1657 	if (!tiocmget)
1658 		 return -ENOENT;
1659 	spin_lock_irq(&serial->serial_lock);
1660 	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1661 	spin_unlock_irq(&serial->serial_lock);
1662 
1663 	icount.cts         = cnow.cts;
1664 	icount.dsr         = cnow.dsr;
1665 	icount.rng         = cnow.rng;
1666 	icount.dcd         = cnow.dcd;
1667 	icount.rx          = cnow.rx;
1668 	icount.tx          = cnow.tx;
1669 	icount.frame       = cnow.frame;
1670 	icount.overrun     = cnow.overrun;
1671 	icount.parity      = cnow.parity;
1672 	icount.brk         = cnow.brk;
1673 	icount.buf_overrun = cnow.buf_overrun;
1674 
1675 	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
1676 }
1677 
1678 
1679 static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
1680 {
1681 	int retval;
1682 	struct hso_serial *serial = get_serial_by_tty(tty);
1683 	struct hso_tiocmget  *tiocmget;
1684 	u16 UART_state_bitmap;
1685 
1686 	/* sanity check */
1687 	if (!serial) {
1688 		D1("no tty structures");
1689 		return -EINVAL;
1690 	}
1691 	spin_lock_irq(&serial->serial_lock);
1692 	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
1693 	    ((serial->dtr_state) ? TIOCM_DTR : 0);
1694 	tiocmget = serial->tiocmget;
1695 	if (tiocmget) {
1696 
1697 		UART_state_bitmap = le16_to_cpu(
1698 			tiocmget->prev_UART_state_bitmap);
1699 		if (UART_state_bitmap & B_RING_SIGNAL)
1700 			retval |=  TIOCM_RNG;
1701 		if (UART_state_bitmap & B_RX_CARRIER)
1702 			retval |=  TIOCM_CD;
1703 		if (UART_state_bitmap & B_TX_CARRIER)
1704 			retval |=  TIOCM_DSR;
1705 	}
1706 	spin_unlock_irq(&serial->serial_lock);
1707 	return retval;
1708 }
1709 
1710 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
1711 			       unsigned int set, unsigned int clear)
1712 {
1713 	int val = 0;
1714 	unsigned long flags;
1715 	int if_num;
1716 	struct hso_serial *serial = get_serial_by_tty(tty);
1717 
1718 	/* sanity check */
1719 	if (!serial) {
1720 		D1("no tty structures");
1721 		return -EINVAL;
1722 	}
1723 
1724 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
1725 		return -EINVAL;
1726 
1727 	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
1728 
1729 	spin_lock_irqsave(&serial->serial_lock, flags);
1730 	if (set & TIOCM_RTS)
1731 		serial->rts_state = 1;
1732 	if (set & TIOCM_DTR)
1733 		serial->dtr_state = 1;
1734 
1735 	if (clear & TIOCM_RTS)
1736 		serial->rts_state = 0;
1737 	if (clear & TIOCM_DTR)
1738 		serial->dtr_state = 0;
1739 
1740 	if (serial->dtr_state)
1741 		val |= 0x01;
1742 	if (serial->rts_state)
1743 		val |= 0x02;
1744 
1745 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1746 
1747 	return usb_control_msg(serial->parent->usb,
1748 			       usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
1749 			       0x21, val, if_num, NULL, 0,
1750 			       USB_CTRL_SET_TIMEOUT);
1751 }
1752 
1753 static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
1754 			    unsigned int cmd, unsigned long arg)
1755 {
1756 	struct hso_serial *serial =  get_serial_by_tty(tty);
1757 	void __user *uarg = (void __user *)arg;
1758 	int ret = 0;
1759 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
1760 
1761 	if (!serial)
1762 		return -ENODEV;
1763 	switch (cmd) {
1764 	case TIOCMIWAIT:
1765 		ret = hso_wait_modem_status(serial, arg);
1766 		break;
1767 
1768 	case TIOCGICOUNT:
1769 		ret = hso_get_count(serial, uarg);
1770 		break;
1771 	default:
1772 		ret = -ENOIOCTLCMD;
1773 		break;
1774 	}
1775 	return ret;
1776 }
1777 
1778 
1779 /* starts a transmit */
1780 static void hso_kick_transmit(struct hso_serial *serial)
1781 {
1782 	u8 *temp;
1783 	unsigned long flags;
1784 	int res;
1785 
1786 	spin_lock_irqsave(&serial->serial_lock, flags);
1787 	if (!serial->tx_buffer_count)
1788 		goto out;
1789 
1790 	if (serial->tx_urb_used)
1791 		goto out;
1792 
1793 	/* Wakeup USB interface if necessary */
1794 	if (hso_get_activity(serial->parent) == -EAGAIN)
1795 		goto out;
1796 
1797 	/* Switch pointers around to avoid memcpy */
1798 	temp = serial->tx_buffer;
1799 	serial->tx_buffer = serial->tx_data;
1800 	serial->tx_data = temp;
1801 	serial->tx_data_count = serial->tx_buffer_count;
1802 	serial->tx_buffer_count = 0;
1803 
1804 	/* If temp is set, it means we switched buffers */
1805 	if (temp && serial->write_data) {
1806 		res = serial->write_data(serial);
1807 		if (res >= 0)
1808 			serial->tx_urb_used = 1;
1809 	}
1810 out:
1811 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1812 }
1813 
1814 /* make a request (for reading and writing data to muxed serial port) */
1815 static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
1816 			      struct urb *ctrl_urb,
1817 			      struct usb_ctrlrequest *ctrl_req,
1818 			      u8 *ctrl_urb_data, u32 size)
1819 {
1820 	int result;
1821 	int pipe;
1822 
1823 	/* Sanity check */
1824 	if (!serial || !ctrl_urb || !ctrl_req) {
1825 		printk(KERN_ERR "%s: Wrong arguments\n", __func__);
1826 		return -EINVAL;
1827 	}
1828 
1829 	/* initialize */
1830 	ctrl_req->wValue = 0;
1831 	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
1832 	ctrl_req->wLength = cpu_to_le16(size);
1833 
1834 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
1835 		/* Reading command */
1836 		ctrl_req->bRequestType = USB_DIR_IN |
1837 					 USB_TYPE_OPTION_VENDOR |
1838 					 USB_RECIP_INTERFACE;
1839 		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
1840 		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
1841 	} else {
1842 		/* Writing command */
1843 		ctrl_req->bRequestType = USB_DIR_OUT |
1844 					 USB_TYPE_OPTION_VENDOR |
1845 					 USB_RECIP_INTERFACE;
1846 		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
1847 		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
1848 	}
1849 	/* syslog */
1850 	D2("%s command (%02x) len: %d, port: %d",
1851 	   type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
1852 	   ctrl_req->bRequestType, ctrl_req->wLength, port);
1853 
1854 	/* Load ctrl urb */
1855 	ctrl_urb->transfer_flags = 0;
1856 	usb_fill_control_urb(ctrl_urb,
1857 			     serial->parent->usb,
1858 			     pipe,
1859 			     (u8 *) ctrl_req,
1860 			     ctrl_urb_data, size, ctrl_callback, serial);
1861 	/* Send it on merry way */
1862 	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
1863 	if (result) {
1864 		dev_err(&ctrl_urb->dev->dev,
1865 			"%s failed submit ctrl_urb %d type %d\n", __func__,
1866 			result, type);
1867 		return result;
1868 	}
1869 
1870 	/* done */
1871 	return size;
1872 }
1873 
1874 /* called by intr_callback when read occurs */
1875 static int hso_mux_serial_read(struct hso_serial *serial)
1876 {
1877 	if (!serial)
1878 		return -EINVAL;
1879 
1880 	/* clean data */
1881 	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
1882 	/* make the request */
1883 
1884 	if (serial->num_rx_urbs != 1) {
1885 		dev_err(&serial->parent->interface->dev,
1886 			"ERROR: mux'd reads with multiple buffers "
1887 			"not possible\n");
1888 		return 0;
1889 	}
1890 	return mux_device_request(serial,
1891 				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
1892 				  serial->parent->port_spec & HSO_PORT_MASK,
1893 				  serial->rx_urb[0],
1894 				  &serial->ctrl_req_rx,
1895 				  serial->rx_data[0], serial->rx_data_length);
1896 }
1897 
1898 /* used for muxed serial port callback (muxed serial read) */
1899 static void intr_callback(struct urb *urb)
1900 {
1901 	struct hso_shared_int *shared_int = urb->context;
1902 	struct hso_serial *serial;
1903 	unsigned char *port_req;
1904 	int status = urb->status;
1905 	int i;
1906 
1907 	usb_mark_last_busy(urb->dev);
1908 
1909 	/* sanity check */
1910 	if (!shared_int)
1911 		return;
1912 
1913 	/* status check */
1914 	if (status) {
1915 		handle_usb_error(status, __func__, NULL);
1916 		return;
1917 	}
1918 	D4("\n--- Got intr callback 0x%02X ---", status);
1919 
1920 	/* what request? */
1921 	port_req = urb->transfer_buffer;
1922 	D4(" port_req = 0x%.2X\n", *port_req);
1923 	/* loop over all muxed ports to find the one sending this */
1924 	for (i = 0; i < 8; i++) {
1925 		/* max 8 channels on MUX */
1926 		if (*port_req & (1 << i)) {
1927 			serial = get_serial_by_shared_int_and_type(shared_int,
1928 								   (1 << i));
1929 			if (serial != NULL) {
1930 				D1("Pending read interrupt on port %d\n", i);
1931 				spin_lock(&serial->serial_lock);
1932 				if (serial->rx_state == RX_IDLE &&
1933 					serial->open_count > 0) {
1934 					/* Setup and send a ctrl req read on
1935 					 * port i */
1936 					if (!serial->rx_urb_filled[0]) {
1937 						serial->rx_state = RX_SENT;
1938 						hso_mux_serial_read(serial);
1939 					} else
1940 						serial->rx_state = RX_PENDING;
1941 				} else {
1942 					D1("Already a read pending on "
1943 					   "port %d or port not open\n", i);
1944 				}
1945 				spin_unlock(&serial->serial_lock);
1946 			}
1947 		}
1948 	}
1949 	/* Resubmit interrupt urb */
1950 	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
1951 }
1952 
1953 /* called for writing to muxed serial port */
1954 static int hso_mux_serial_write_data(struct hso_serial *serial)
1955 {
1956 	if (NULL == serial)
1957 		return -EINVAL;
1958 
1959 	return mux_device_request(serial,
1960 				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
1961 				  serial->parent->port_spec & HSO_PORT_MASK,
1962 				  serial->tx_urb,
1963 				  &serial->ctrl_req_tx,
1964 				  serial->tx_data, serial->tx_data_count);
1965 }
1966 
1967 /* write callback for Diag and CS port */
1968 static void hso_std_serial_write_bulk_callback(struct urb *urb)
1969 {
1970 	struct hso_serial *serial = urb->context;
1971 	int status = urb->status;
1972 	struct tty_struct *tty;
1973 
1974 	/* sanity check */
1975 	if (!serial) {
1976 		D1("serial == NULL");
1977 		return;
1978 	}
1979 
1980 	spin_lock(&serial->serial_lock);
1981 	serial->tx_urb_used = 0;
1982 	tty = tty_kref_get(serial->tty);
1983 	spin_unlock(&serial->serial_lock);
1984 	if (status) {
1985 		handle_usb_error(status, __func__, serial->parent);
1986 		tty_kref_put(tty);
1987 		return;
1988 	}
1989 	hso_put_activity(serial->parent);
1990 	if (tty) {
1991 		tty_wakeup(tty);
1992 		tty_kref_put(tty);
1993 	}
1994 	hso_kick_transmit(serial);
1995 
1996 	D1(" ");
1997 }
1998 
1999 /* called for writing diag or CS serial port */
2000 static int hso_std_serial_write_data(struct hso_serial *serial)
2001 {
2002 	int count = serial->tx_data_count;
2003 	int result;
2004 
2005 	usb_fill_bulk_urb(serial->tx_urb,
2006 			  serial->parent->usb,
2007 			  usb_sndbulkpipe(serial->parent->usb,
2008 					  serial->out_endp->
2009 					  bEndpointAddress & 0x7F),
2010 			  serial->tx_data, serial->tx_data_count,
2011 			  hso_std_serial_write_bulk_callback, serial);
2012 
2013 	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
2014 	if (result) {
2015 		dev_warn(&serial->parent->usb->dev,
2016 			 "Failed to submit urb - res %d\n", result);
2017 		return result;
2018 	}
2019 
2020 	return count;
2021 }
2022 
2023 /* callback after read or write on muxed serial port */
2024 static void ctrl_callback(struct urb *urb)
2025 {
2026 	struct hso_serial *serial = urb->context;
2027 	struct usb_ctrlrequest *req;
2028 	int status = urb->status;
2029 	struct tty_struct *tty;
2030 
2031 	/* sanity check */
2032 	if (!serial)
2033 		return;
2034 
2035 	spin_lock(&serial->serial_lock);
2036 	serial->tx_urb_used = 0;
2037 	tty = tty_kref_get(serial->tty);
2038 	spin_unlock(&serial->serial_lock);
2039 	if (status) {
2040 		handle_usb_error(status, __func__, serial->parent);
2041 		tty_kref_put(tty);
2042 		return;
2043 	}
2044 
2045 	/* what request? */
2046 	req = (struct usb_ctrlrequest *)(urb->setup_packet);
2047 	D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
2048 	D4("Actual length of urb = %d\n", urb->actual_length);
2049 	DUMP1(urb->transfer_buffer, urb->actual_length);
2050 
2051 	if (req->bRequestType ==
2052 	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
2053 		/* response to a read command */
2054 		serial->rx_urb_filled[0] = 1;
2055 		spin_lock(&serial->serial_lock);
2056 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
2057 		spin_unlock(&serial->serial_lock);
2058 	} else {
2059 		hso_put_activity(serial->parent);
2060 		if (tty)
2061 			tty_wakeup(tty);
2062 		/* response to a write command */
2063 		hso_kick_transmit(serial);
2064 	}
2065 	tty_kref_put(tty);
2066 }
2067 
2068 /* handle RX data for serial port */
2069 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
2070 {
2071 	struct tty_struct *tty;
2072 	int write_length_remaining = 0;
2073 	int curr_write_len;
2074 
2075 	/* Sanity check */
2076 	if (urb == NULL || serial == NULL) {
2077 		D1("serial = NULL");
2078 		return -2;
2079 	}
2080 
2081 	/* All callers to put_rxbuf_data hold serial_lock */
2082 	tty = tty_kref_get(serial->tty);
2083 
2084 	/* Push data to tty */
2085 	if (tty) {
2086 		write_length_remaining = urb->actual_length -
2087 			serial->curr_rx_urb_offset;
2088 		D1("data to push to tty");
2089 		while (write_length_remaining) {
2090 			if (test_bit(TTY_THROTTLED, &tty->flags)) {
2091 				tty_kref_put(tty);
2092 				return -1;
2093 			}
2094 			curr_write_len =  tty_insert_flip_string
2095 				(tty, urb->transfer_buffer +
2096 				 serial->curr_rx_urb_offset,
2097 				 write_length_remaining);
2098 			serial->curr_rx_urb_offset += curr_write_len;
2099 			write_length_remaining -= curr_write_len;
2100 			tty_flip_buffer_push(tty);
2101 		}
2102 	}
2103 	if (write_length_remaining == 0) {
2104 		serial->curr_rx_urb_offset = 0;
2105 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
2106 	}
2107 	tty_kref_put(tty);
2108 	return write_length_remaining;
2109 }
2110 
2111 
2112 /* Base driver functions */
2113 
2114 static void hso_log_port(struct hso_device *hso_dev)
2115 {
2116 	char *port_type;
2117 	char port_dev[20];
2118 
2119 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
2120 	case HSO_PORT_CONTROL:
2121 		port_type = "Control";
2122 		break;
2123 	case HSO_PORT_APP:
2124 		port_type = "Application";
2125 		break;
2126 	case HSO_PORT_GPS:
2127 		port_type = "GPS";
2128 		break;
2129 	case HSO_PORT_GPS_CONTROL:
2130 		port_type = "GPS control";
2131 		break;
2132 	case HSO_PORT_APP2:
2133 		port_type = "Application2";
2134 		break;
2135 	case HSO_PORT_PCSC:
2136 		port_type = "PCSC";
2137 		break;
2138 	case HSO_PORT_DIAG:
2139 		port_type = "Diagnostic";
2140 		break;
2141 	case HSO_PORT_DIAG2:
2142 		port_type = "Diagnostic2";
2143 		break;
2144 	case HSO_PORT_MODEM:
2145 		port_type = "Modem";
2146 		break;
2147 	case HSO_PORT_NETWORK:
2148 		port_type = "Network";
2149 		break;
2150 	default:
2151 		port_type = "Unknown";
2152 		break;
2153 	}
2154 	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2155 		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
2156 	} else
2157 		sprintf(port_dev, "/dev/%s%d", tty_filename,
2158 			dev2ser(hso_dev)->minor);
2159 
2160 	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
2161 		port_type, port_dev);
2162 }
2163 
2164 static int hso_start_net_device(struct hso_device *hso_dev)
2165 {
2166 	int i, result = 0;
2167 	struct hso_net *hso_net = dev2net(hso_dev);
2168 
2169 	if (!hso_net)
2170 		return -ENODEV;
2171 
2172 	/* send URBs for all read buffers */
2173 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2174 
2175 		/* Prep a receive URB */
2176 		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
2177 				  hso_dev->usb,
2178 				  usb_rcvbulkpipe(hso_dev->usb,
2179 						  hso_net->in_endp->
2180 						  bEndpointAddress & 0x7F),
2181 				  hso_net->mux_bulk_rx_buf_pool[i],
2182 				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
2183 				  hso_net);
2184 
2185 		/* Put it out there so the device can send us stuff */
2186 		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
2187 					GFP_NOIO);
2188 		if (result)
2189 			dev_warn(&hso_dev->usb->dev,
2190 				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
2191 				i, result);
2192 	}
2193 
2194 	return result;
2195 }
2196 
2197 static int hso_stop_net_device(struct hso_device *hso_dev)
2198 {
2199 	int i;
2200 	struct hso_net *hso_net = dev2net(hso_dev);
2201 
2202 	if (!hso_net)
2203 		return -ENODEV;
2204 
2205 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2206 		if (hso_net->mux_bulk_rx_urb_pool[i])
2207 			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2208 
2209 	}
2210 	if (hso_net->mux_bulk_tx_urb)
2211 		usb_kill_urb(hso_net->mux_bulk_tx_urb);
2212 
2213 	return 0;
2214 }
2215 
2216 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
2217 {
2218 	int i, result = 0;
2219 	struct hso_serial *serial = dev2ser(hso_dev);
2220 
2221 	if (!serial)
2222 		return -ENODEV;
2223 
2224 	/* If it is not the MUX port fill in and submit a bulk urb (already
2225 	 * allocated in hso_serial_start) */
2226 	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
2227 		for (i = 0; i < serial->num_rx_urbs; i++) {
2228 			usb_fill_bulk_urb(serial->rx_urb[i],
2229 					  serial->parent->usb,
2230 					  usb_rcvbulkpipe(serial->parent->usb,
2231 							  serial->in_endp->
2232 							  bEndpointAddress &
2233 							  0x7F),
2234 					  serial->rx_data[i],
2235 					  serial->rx_data_length,
2236 					  hso_std_serial_read_bulk_callback,
2237 					  serial);
2238 			result = usb_submit_urb(serial->rx_urb[i], flags);
2239 			if (result) {
2240 				dev_warn(&serial->parent->usb->dev,
2241 					 "Failed to submit urb - res %d\n",
2242 					 result);
2243 				break;
2244 			}
2245 		}
2246 	} else {
2247 		mutex_lock(&serial->shared_int->shared_int_lock);
2248 		if (!serial->shared_int->use_count) {
2249 			result =
2250 			    hso_mux_submit_intr_urb(serial->shared_int,
2251 						    hso_dev->usb, flags);
2252 		}
2253 		serial->shared_int->use_count++;
2254 		mutex_unlock(&serial->shared_int->shared_int_lock);
2255 	}
2256 	if (serial->tiocmget)
2257 		tiocmget_submit_urb(serial,
2258 				    serial->tiocmget,
2259 				    serial->parent->usb);
2260 	return result;
2261 }
2262 
2263 static int hso_stop_serial_device(struct hso_device *hso_dev)
2264 {
2265 	int i;
2266 	struct hso_serial *serial = dev2ser(hso_dev);
2267 	struct hso_tiocmget  *tiocmget;
2268 
2269 	if (!serial)
2270 		return -ENODEV;
2271 
2272 	for (i = 0; i < serial->num_rx_urbs; i++) {
2273 		if (serial->rx_urb[i]) {
2274 				usb_kill_urb(serial->rx_urb[i]);
2275 				serial->rx_urb_filled[i] = 0;
2276 		}
2277 	}
2278 	serial->curr_rx_urb_idx = 0;
2279 	serial->curr_rx_urb_offset = 0;
2280 
2281 	if (serial->tx_urb)
2282 		usb_kill_urb(serial->tx_urb);
2283 
2284 	if (serial->shared_int) {
2285 		mutex_lock(&serial->shared_int->shared_int_lock);
2286 		if (serial->shared_int->use_count &&
2287 		    (--serial->shared_int->use_count == 0)) {
2288 			struct urb *urb;
2289 
2290 			urb = serial->shared_int->shared_intr_urb;
2291 			if (urb)
2292 				usb_kill_urb(urb);
2293 		}
2294 		mutex_unlock(&serial->shared_int->shared_int_lock);
2295 	}
2296 	tiocmget = serial->tiocmget;
2297 	if (tiocmget) {
2298 		wake_up_interruptible(&tiocmget->waitq);
2299 		usb_kill_urb(tiocmget->urb);
2300 	}
2301 
2302 	return 0;
2303 }
2304 
2305 static void hso_serial_common_free(struct hso_serial *serial)
2306 {
2307 	int i;
2308 
2309 	if (serial->parent->dev)
2310 		device_remove_file(serial->parent->dev, &dev_attr_hsotype);
2311 
2312 	tty_unregister_device(tty_drv, serial->minor);
2313 
2314 	for (i = 0; i < serial->num_rx_urbs; i++) {
2315 		/* unlink and free RX URB */
2316 		usb_free_urb(serial->rx_urb[i]);
2317 		/* free the RX buffer */
2318 		kfree(serial->rx_data[i]);
2319 	}
2320 
2321 	/* unlink and free TX URB */
2322 	usb_free_urb(serial->tx_urb);
2323 	kfree(serial->tx_data);
2324 }
2325 
2326 static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
2327 				    int rx_size, int tx_size)
2328 {
2329 	struct device *dev;
2330 	int minor;
2331 	int i;
2332 
2333 	minor = get_free_serial_index();
2334 	if (minor < 0)
2335 		goto exit;
2336 
2337 	/* register our minor number */
2338 	serial->parent->dev = tty_register_device(tty_drv, minor,
2339 					&serial->parent->interface->dev);
2340 	dev = serial->parent->dev;
2341 	dev_set_drvdata(dev, serial->parent);
2342 	i = device_create_file(dev, &dev_attr_hsotype);
2343 
2344 	/* fill in specific data for later use */
2345 	serial->minor = minor;
2346 	serial->magic = HSO_SERIAL_MAGIC;
2347 	spin_lock_init(&serial->serial_lock);
2348 	serial->num_rx_urbs = num_urbs;
2349 
2350 	/* RX, allocate urb and initialize */
2351 
2352 	/* prepare our RX buffer */
2353 	serial->rx_data_length = rx_size;
2354 	for (i = 0; i < serial->num_rx_urbs; i++) {
2355 		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
2356 		if (!serial->rx_urb[i]) {
2357 			dev_err(dev, "Could not allocate urb?\n");
2358 			goto exit;
2359 		}
2360 		serial->rx_urb[i]->transfer_buffer = NULL;
2361 		serial->rx_urb[i]->transfer_buffer_length = 0;
2362 		serial->rx_data[i] = kzalloc(serial->rx_data_length,
2363 					     GFP_KERNEL);
2364 		if (!serial->rx_data[i]) {
2365 			dev_err(dev, "%s - Out of memory\n", __func__);
2366 			goto exit;
2367 		}
2368 	}
2369 
2370 	/* TX, allocate urb and initialize */
2371 	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2372 	if (!serial->tx_urb) {
2373 		dev_err(dev, "Could not allocate urb?\n");
2374 		goto exit;
2375 	}
2376 	serial->tx_urb->transfer_buffer = NULL;
2377 	serial->tx_urb->transfer_buffer_length = 0;
2378 	/* prepare our TX buffer */
2379 	serial->tx_data_count = 0;
2380 	serial->tx_buffer_count = 0;
2381 	serial->tx_data_length = tx_size;
2382 	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
2383 	if (!serial->tx_data) {
2384 		dev_err(dev, "%s - Out of memory\n", __func__);
2385 		goto exit;
2386 	}
2387 	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
2388 	if (!serial->tx_buffer) {
2389 		dev_err(dev, "%s - Out of memory\n", __func__);
2390 		goto exit;
2391 	}
2392 
2393 	return 0;
2394 exit:
2395 	hso_serial_common_free(serial);
2396 	return -1;
2397 }
2398 
2399 /* Creates a general hso device */
2400 static struct hso_device *hso_create_device(struct usb_interface *intf,
2401 					    int port_spec)
2402 {
2403 	struct hso_device *hso_dev;
2404 
2405 	hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
2406 	if (!hso_dev)
2407 		return NULL;
2408 
2409 	hso_dev->port_spec = port_spec;
2410 	hso_dev->usb = interface_to_usbdev(intf);
2411 	hso_dev->interface = intf;
2412 	kref_init(&hso_dev->ref);
2413 	mutex_init(&hso_dev->mutex);
2414 
2415 	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
2416 	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
2417 	INIT_WORK(&hso_dev->reset_device, reset_device);
2418 
2419 	return hso_dev;
2420 }
2421 
2422 /* Removes a network device in the network device table */
2423 static int remove_net_device(struct hso_device *hso_dev)
2424 {
2425 	int i;
2426 
2427 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2428 		if (network_table[i] == hso_dev) {
2429 			network_table[i] = NULL;
2430 			break;
2431 		}
2432 	}
2433 	if (i == HSO_MAX_NET_DEVICES)
2434 		return -1;
2435 	return 0;
2436 }
2437 
2438 /* Frees our network device */
2439 static void hso_free_net_device(struct hso_device *hso_dev)
2440 {
2441 	int i;
2442 	struct hso_net *hso_net = dev2net(hso_dev);
2443 
2444 	if (!hso_net)
2445 		return;
2446 
2447 	remove_net_device(hso_net->parent);
2448 
2449 	if (hso_net->net) {
2450 		unregister_netdev(hso_net->net);
2451 		free_netdev(hso_net->net);
2452 	}
2453 
2454 	/* start freeing */
2455 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2456 		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2457 		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
2458 		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
2459 	}
2460 	usb_free_urb(hso_net->mux_bulk_tx_urb);
2461 	kfree(hso_net->mux_bulk_tx_buf);
2462 	hso_net->mux_bulk_tx_buf = NULL;
2463 
2464 	kfree(hso_dev);
2465 }
2466 
2467 static const struct net_device_ops hso_netdev_ops = {
2468 	.ndo_open	= hso_net_open,
2469 	.ndo_stop	= hso_net_close,
2470 	.ndo_start_xmit = hso_net_start_xmit,
2471 	.ndo_tx_timeout = hso_net_tx_timeout,
2472 };
2473 
2474 /* initialize the network interface */
2475 static void hso_net_init(struct net_device *net)
2476 {
2477 	struct hso_net *hso_net = netdev_priv(net);
2478 
2479 	D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
2480 
2481 	/* fill in the other fields */
2482 	net->netdev_ops = &hso_netdev_ops;
2483 	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
2484 	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
2485 	net->type = ARPHRD_NONE;
2486 	net->mtu = DEFAULT_MTU - 14;
2487 	net->tx_queue_len = 10;
2488 	SET_ETHTOOL_OPS(net, &ops);
2489 
2490 	/* and initialize the semaphore */
2491 	spin_lock_init(&hso_net->net_lock);
2492 }
2493 
2494 /* Adds a network device in the network device table */
2495 static int add_net_device(struct hso_device *hso_dev)
2496 {
2497 	int i;
2498 
2499 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2500 		if (network_table[i] == NULL) {
2501 			network_table[i] = hso_dev;
2502 			break;
2503 		}
2504 	}
2505 	if (i == HSO_MAX_NET_DEVICES)
2506 		return -1;
2507 	return 0;
2508 }
2509 
2510 static int hso_rfkill_set_block(void *data, bool blocked)
2511 {
2512 	struct hso_device *hso_dev = data;
2513 	int enabled = !blocked;
2514 	int rv;
2515 
2516 	mutex_lock(&hso_dev->mutex);
2517 	if (hso_dev->usb_gone)
2518 		rv = 0;
2519 	else
2520 		rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
2521 				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
2522 				       USB_CTRL_SET_TIMEOUT);
2523 	mutex_unlock(&hso_dev->mutex);
2524 	return rv;
2525 }
2526 
2527 static const struct rfkill_ops hso_rfkill_ops = {
2528 	.set_block = hso_rfkill_set_block,
2529 };
2530 
2531 /* Creates and sets up everything for rfkill */
2532 static void hso_create_rfkill(struct hso_device *hso_dev,
2533 			     struct usb_interface *interface)
2534 {
2535 	struct hso_net *hso_net = dev2net(hso_dev);
2536 	struct device *dev = &hso_net->net->dev;
2537 	char *rfkn;
2538 
2539 	rfkn = kzalloc(20, GFP_KERNEL);
2540 	if (!rfkn)
2541 		dev_err(dev, "%s - Out of memory\n", __func__);
2542 
2543 	snprintf(rfkn, 20, "hso-%d",
2544 		 interface->altsetting->desc.bInterfaceNumber);
2545 
2546 	hso_net->rfkill = rfkill_alloc(rfkn,
2547 				       &interface_to_usbdev(interface)->dev,
2548 				       RFKILL_TYPE_WWAN,
2549 				       &hso_rfkill_ops, hso_dev);
2550 	if (!hso_net->rfkill) {
2551 		dev_err(dev, "%s - Out of memory\n", __func__);
2552 		kfree(rfkn);
2553 		return;
2554 	}
2555 	if (rfkill_register(hso_net->rfkill) < 0) {
2556 		rfkill_destroy(hso_net->rfkill);
2557 		kfree(rfkn);
2558 		hso_net->rfkill = NULL;
2559 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
2560 		return;
2561 	}
2562 }
2563 
2564 static struct device_type hso_type = {
2565 	.name	= "wwan",
2566 };
2567 
2568 /* Creates our network device */
2569 static struct hso_device *hso_create_net_device(struct usb_interface *interface,
2570 						int port_spec)
2571 {
2572 	int result, i;
2573 	struct net_device *net;
2574 	struct hso_net *hso_net;
2575 	struct hso_device *hso_dev;
2576 
2577 	hso_dev = hso_create_device(interface, port_spec);
2578 	if (!hso_dev)
2579 		return NULL;
2580 
2581 	/* allocate our network device, then we can put in our private data */
2582 	/* call hso_net_init to do the basic initialization */
2583 	net = alloc_netdev(sizeof(struct hso_net), "hso%d", hso_net_init);
2584 	if (!net) {
2585 		dev_err(&interface->dev, "Unable to create ethernet device\n");
2586 		goto exit;
2587 	}
2588 
2589 	hso_net = netdev_priv(net);
2590 
2591 	hso_dev->port_data.dev_net = hso_net;
2592 	hso_net->net = net;
2593 	hso_net->parent = hso_dev;
2594 
2595 	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2596 				      USB_DIR_IN);
2597 	if (!hso_net->in_endp) {
2598 		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
2599 		goto exit;
2600 	}
2601 	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2602 				       USB_DIR_OUT);
2603 	if (!hso_net->out_endp) {
2604 		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
2605 		goto exit;
2606 	}
2607 	SET_NETDEV_DEV(net, &interface->dev);
2608 	SET_NETDEV_DEVTYPE(net, &hso_type);
2609 
2610 	/* registering our net device */
2611 	result = register_netdev(net);
2612 	if (result) {
2613 		dev_err(&interface->dev, "Failed to register device\n");
2614 		goto exit;
2615 	}
2616 
2617 	/* start allocating */
2618 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2619 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
2620 		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
2621 			dev_err(&interface->dev, "Could not allocate rx urb\n");
2622 			goto exit;
2623 		}
2624 		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
2625 							   GFP_KERNEL);
2626 		if (!hso_net->mux_bulk_rx_buf_pool[i]) {
2627 			dev_err(&interface->dev, "Could not allocate rx buf\n");
2628 			goto exit;
2629 		}
2630 	}
2631 	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2632 	if (!hso_net->mux_bulk_tx_urb) {
2633 		dev_err(&interface->dev, "Could not allocate tx urb\n");
2634 		goto exit;
2635 	}
2636 	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
2637 	if (!hso_net->mux_bulk_tx_buf) {
2638 		dev_err(&interface->dev, "Could not allocate tx buf\n");
2639 		goto exit;
2640 	}
2641 
2642 	add_net_device(hso_dev);
2643 
2644 	hso_log_port(hso_dev);
2645 
2646 	hso_create_rfkill(hso_dev, interface);
2647 
2648 	return hso_dev;
2649 exit:
2650 	hso_free_net_device(hso_dev);
2651 	return NULL;
2652 }
2653 
2654 static void hso_free_tiomget(struct hso_serial *serial)
2655 {
2656 	struct hso_tiocmget *tiocmget = serial->tiocmget;
2657 	if (tiocmget) {
2658 		if (tiocmget->urb) {
2659 			usb_free_urb(tiocmget->urb);
2660 			tiocmget->urb = NULL;
2661 		}
2662 		serial->tiocmget = NULL;
2663 		kfree(tiocmget);
2664 
2665 	}
2666 }
2667 
2668 /* Frees an AT channel ( goes for both mux and non-mux ) */
2669 static void hso_free_serial_device(struct hso_device *hso_dev)
2670 {
2671 	struct hso_serial *serial = dev2ser(hso_dev);
2672 
2673 	if (!serial)
2674 		return;
2675 	set_serial_by_index(serial->minor, NULL);
2676 
2677 	hso_serial_common_free(serial);
2678 
2679 	if (serial->shared_int) {
2680 		mutex_lock(&serial->shared_int->shared_int_lock);
2681 		if (--serial->shared_int->ref_count == 0)
2682 			hso_free_shared_int(serial->shared_int);
2683 		else
2684 			mutex_unlock(&serial->shared_int->shared_int_lock);
2685 	}
2686 	hso_free_tiomget(serial);
2687 	kfree(serial);
2688 	kfree(hso_dev);
2689 }
2690 
2691 /* Creates a bulk AT channel */
2692 static struct hso_device *hso_create_bulk_serial_device(
2693 			struct usb_interface *interface, int port)
2694 {
2695 	struct hso_device *hso_dev;
2696 	struct hso_serial *serial;
2697 	int num_urbs;
2698 	struct hso_tiocmget *tiocmget;
2699 
2700 	hso_dev = hso_create_device(interface, port);
2701 	if (!hso_dev)
2702 		return NULL;
2703 
2704 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2705 	if (!serial)
2706 		goto exit;
2707 
2708 	serial->parent = hso_dev;
2709 	hso_dev->port_data.dev_serial = serial;
2710 
2711 	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
2712 		num_urbs = 2;
2713 		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
2714 					   GFP_KERNEL);
2715 		/* it isn't going to break our heart if serial->tiocmget
2716 		 *  allocation fails don't bother checking this.
2717 		 */
2718 		if (serial->tiocmget) {
2719 			tiocmget = serial->tiocmget;
2720 			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
2721 			if (tiocmget->urb) {
2722 				mutex_init(&tiocmget->mutex);
2723 				init_waitqueue_head(&tiocmget->waitq);
2724 				tiocmget->endp = hso_get_ep(
2725 					interface,
2726 					USB_ENDPOINT_XFER_INT,
2727 					USB_DIR_IN);
2728 			} else
2729 				hso_free_tiomget(serial);
2730 		}
2731 	}
2732 	else
2733 		num_urbs = 1;
2734 
2735 	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
2736 				     BULK_URB_TX_SIZE))
2737 		goto exit;
2738 
2739 	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2740 				     USB_DIR_IN);
2741 	if (!serial->in_endp) {
2742 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2743 		goto exit2;
2744 	}
2745 
2746 	if (!
2747 	    (serial->out_endp =
2748 	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
2749 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2750 		goto exit2;
2751 	}
2752 
2753 	serial->write_data = hso_std_serial_write_data;
2754 
2755 	/* and record this serial */
2756 	set_serial_by_index(serial->minor, serial);
2757 
2758 	/* setup the proc dirs and files if needed */
2759 	hso_log_port(hso_dev);
2760 
2761 	/* done, return it */
2762 	return hso_dev;
2763 
2764 exit2:
2765 	hso_serial_common_free(serial);
2766 exit:
2767 	hso_free_tiomget(serial);
2768 	kfree(serial);
2769 	kfree(hso_dev);
2770 	return NULL;
2771 }
2772 
2773 /* Creates a multiplexed AT channel */
2774 static
2775 struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
2776 						int port,
2777 						struct hso_shared_int *mux)
2778 {
2779 	struct hso_device *hso_dev;
2780 	struct hso_serial *serial;
2781 	int port_spec;
2782 
2783 	port_spec = HSO_INTF_MUX;
2784 	port_spec &= ~HSO_PORT_MASK;
2785 
2786 	port_spec |= hso_mux_to_port(port);
2787 	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
2788 		return NULL;
2789 
2790 	hso_dev = hso_create_device(interface, port_spec);
2791 	if (!hso_dev)
2792 		return NULL;
2793 
2794 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2795 	if (!serial)
2796 		goto exit;
2797 
2798 	hso_dev->port_data.dev_serial = serial;
2799 	serial->parent = hso_dev;
2800 
2801 	if (hso_serial_common_create
2802 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
2803 		goto exit;
2804 
2805 	serial->tx_data_length--;
2806 	serial->write_data = hso_mux_serial_write_data;
2807 
2808 	serial->shared_int = mux;
2809 	mutex_lock(&serial->shared_int->shared_int_lock);
2810 	serial->shared_int->ref_count++;
2811 	mutex_unlock(&serial->shared_int->shared_int_lock);
2812 
2813 	/* and record this serial */
2814 	set_serial_by_index(serial->minor, serial);
2815 
2816 	/* setup the proc dirs and files if needed */
2817 	hso_log_port(hso_dev);
2818 
2819 	/* done, return it */
2820 	return hso_dev;
2821 
2822 exit:
2823 	if (serial) {
2824 		tty_unregister_device(tty_drv, serial->minor);
2825 		kfree(serial);
2826 	}
2827 	if (hso_dev)
2828 		kfree(hso_dev);
2829 	return NULL;
2830 
2831 }
2832 
2833 static void hso_free_shared_int(struct hso_shared_int *mux)
2834 {
2835 	usb_free_urb(mux->shared_intr_urb);
2836 	kfree(mux->shared_intr_buf);
2837 	mutex_unlock(&mux->shared_int_lock);
2838 	kfree(mux);
2839 }
2840 
2841 static
2842 struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
2843 {
2844 	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
2845 
2846 	if (!mux)
2847 		return NULL;
2848 
2849 	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
2850 				    USB_DIR_IN);
2851 	if (!mux->intr_endp) {
2852 		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
2853 		goto exit;
2854 	}
2855 
2856 	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
2857 	if (!mux->shared_intr_urb) {
2858 		dev_err(&interface->dev, "Could not allocate intr urb?\n");
2859 		goto exit;
2860 	}
2861 	mux->shared_intr_buf =
2862 		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
2863 			GFP_KERNEL);
2864 	if (!mux->shared_intr_buf) {
2865 		dev_err(&interface->dev, "Could not allocate intr buf?\n");
2866 		goto exit;
2867 	}
2868 
2869 	mutex_init(&mux->shared_int_lock);
2870 
2871 	return mux;
2872 
2873 exit:
2874 	kfree(mux->shared_intr_buf);
2875 	usb_free_urb(mux->shared_intr_urb);
2876 	kfree(mux);
2877 	return NULL;
2878 }
2879 
2880 /* Gets the port spec for a certain interface */
2881 static int hso_get_config_data(struct usb_interface *interface)
2882 {
2883 	struct usb_device *usbdev = interface_to_usbdev(interface);
2884 	u8 config_data[17];
2885 	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
2886 	s32 result;
2887 
2888 	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
2889 			    0x86, 0xC0, 0, 0, config_data, 17,
2890 			    USB_CTRL_SET_TIMEOUT) != 0x11) {
2891 		return -EIO;
2892 	}
2893 
2894 	switch (config_data[if_num]) {
2895 	case 0x0:
2896 		result = 0;
2897 		break;
2898 	case 0x1:
2899 		result = HSO_PORT_DIAG;
2900 		break;
2901 	case 0x2:
2902 		result = HSO_PORT_GPS;
2903 		break;
2904 	case 0x3:
2905 		result = HSO_PORT_GPS_CONTROL;
2906 		break;
2907 	case 0x4:
2908 		result = HSO_PORT_APP;
2909 		break;
2910 	case 0x5:
2911 		result = HSO_PORT_APP2;
2912 		break;
2913 	case 0x6:
2914 		result = HSO_PORT_CONTROL;
2915 		break;
2916 	case 0x7:
2917 		result = HSO_PORT_NETWORK;
2918 		break;
2919 	case 0x8:
2920 		result = HSO_PORT_MODEM;
2921 		break;
2922 	case 0x9:
2923 		result = HSO_PORT_MSD;
2924 		break;
2925 	case 0xa:
2926 		result = HSO_PORT_PCSC;
2927 		break;
2928 	case 0xb:
2929 		result = HSO_PORT_VOICE;
2930 		break;
2931 	default:
2932 		result = 0;
2933 	}
2934 
2935 	if (result)
2936 		result |= HSO_INTF_BULK;
2937 
2938 	if (config_data[16] & 0x1)
2939 		result |= HSO_INFO_CRC_BUG;
2940 
2941 	return result;
2942 }
2943 
2944 /* called once for each interface upon device insertion */
2945 static int hso_probe(struct usb_interface *interface,
2946 		     const struct usb_device_id *id)
2947 {
2948 	int mux, i, if_num, port_spec;
2949 	unsigned char port_mask;
2950 	struct hso_device *hso_dev = NULL;
2951 	struct hso_shared_int *shared_int;
2952 	struct hso_device *tmp_dev = NULL;
2953 
2954 	if_num = interface->altsetting->desc.bInterfaceNumber;
2955 
2956 	/* Get the interface/port specification from either driver_info or from
2957 	 * the device itself */
2958 	if (id->driver_info)
2959 		port_spec = ((u32 *)(id->driver_info))[if_num];
2960 	else
2961 		port_spec = hso_get_config_data(interface);
2962 
2963 	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
2964 		dev_err(&interface->dev, "Not our interface\n");
2965 		return -ENODEV;
2966 	}
2967 	/* Check if we need to switch to alt interfaces prior to port
2968 	 * configuration */
2969 	if (interface->num_altsetting > 1)
2970 		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
2971 	interface->needs_remote_wakeup = 1;
2972 
2973 	/* Allocate new hso device(s) */
2974 	switch (port_spec & HSO_INTF_MASK) {
2975 	case HSO_INTF_MUX:
2976 		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2977 			/* Create the network device */
2978 			if (!disable_net) {
2979 				hso_dev = hso_create_net_device(interface,
2980 								port_spec);
2981 				if (!hso_dev)
2982 					goto exit;
2983 				tmp_dev = hso_dev;
2984 			}
2985 		}
2986 
2987 		if (hso_get_mux_ports(interface, &port_mask))
2988 			/* TODO: de-allocate everything */
2989 			goto exit;
2990 
2991 		shared_int = hso_create_shared_int(interface);
2992 		if (!shared_int)
2993 			goto exit;
2994 
2995 		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
2996 			if (port_mask & i) {
2997 				hso_dev = hso_create_mux_serial_device(
2998 						interface, i, shared_int);
2999 				if (!hso_dev)
3000 					goto exit;
3001 			}
3002 		}
3003 
3004 		if (tmp_dev)
3005 			hso_dev = tmp_dev;
3006 		break;
3007 
3008 	case HSO_INTF_BULK:
3009 		/* It's a regular bulk interface */
3010 		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
3011 		    !disable_net)
3012 			hso_dev = hso_create_net_device(interface, port_spec);
3013 		else
3014 			hso_dev =
3015 			    hso_create_bulk_serial_device(interface, port_spec);
3016 		if (!hso_dev)
3017 			goto exit;
3018 		break;
3019 	default:
3020 		goto exit;
3021 	}
3022 
3023 	/* save our data pointer in this device */
3024 	usb_set_intfdata(interface, hso_dev);
3025 
3026 	/* done */
3027 	return 0;
3028 exit:
3029 	hso_free_interface(interface);
3030 	return -ENODEV;
3031 }
3032 
3033 /* device removed, cleaning up */
3034 static void hso_disconnect(struct usb_interface *interface)
3035 {
3036 	hso_free_interface(interface);
3037 
3038 	/* remove reference of our private data */
3039 	usb_set_intfdata(interface, NULL);
3040 }
3041 
3042 static void async_get_intf(struct work_struct *data)
3043 {
3044 	struct hso_device *hso_dev =
3045 	    container_of(data, struct hso_device, async_get_intf);
3046 	usb_autopm_get_interface(hso_dev->interface);
3047 }
3048 
3049 static void async_put_intf(struct work_struct *data)
3050 {
3051 	struct hso_device *hso_dev =
3052 	    container_of(data, struct hso_device, async_put_intf);
3053 	usb_autopm_put_interface(hso_dev->interface);
3054 }
3055 
3056 static int hso_get_activity(struct hso_device *hso_dev)
3057 {
3058 	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
3059 		if (!hso_dev->is_active) {
3060 			hso_dev->is_active = 1;
3061 			schedule_work(&hso_dev->async_get_intf);
3062 		}
3063 	}
3064 
3065 	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
3066 		return -EAGAIN;
3067 
3068 	usb_mark_last_busy(hso_dev->usb);
3069 
3070 	return 0;
3071 }
3072 
3073 static int hso_put_activity(struct hso_device *hso_dev)
3074 {
3075 	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
3076 		if (hso_dev->is_active) {
3077 			hso_dev->is_active = 0;
3078 			schedule_work(&hso_dev->async_put_intf);
3079 			return -EAGAIN;
3080 		}
3081 	}
3082 	hso_dev->is_active = 0;
3083 	return 0;
3084 }
3085 
3086 /* called by kernel when we need to suspend device */
3087 static int hso_suspend(struct usb_interface *iface, pm_message_t message)
3088 {
3089 	int i, result;
3090 
3091 	/* Stop all serial ports */
3092 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3093 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3094 			result = hso_stop_serial_device(serial_table[i]);
3095 			if (result)
3096 				goto out;
3097 		}
3098 	}
3099 
3100 	/* Stop all network ports */
3101 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3102 		if (network_table[i] &&
3103 		    (network_table[i]->interface == iface)) {
3104 			result = hso_stop_net_device(network_table[i]);
3105 			if (result)
3106 				goto out;
3107 		}
3108 	}
3109 
3110 out:
3111 	return 0;
3112 }
3113 
3114 /* called by kernel when we need to resume device */
3115 static int hso_resume(struct usb_interface *iface)
3116 {
3117 	int i, result = 0;
3118 	struct hso_net *hso_net;
3119 
3120 	/* Start all serial ports */
3121 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3122 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3123 			if (dev2ser(serial_table[i])->open_count) {
3124 				result =
3125 				    hso_start_serial_device(serial_table[i], GFP_NOIO);
3126 				hso_kick_transmit(dev2ser(serial_table[i]));
3127 				if (result)
3128 					goto out;
3129 			}
3130 		}
3131 	}
3132 
3133 	/* Start all network ports */
3134 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3135 		if (network_table[i] &&
3136 		    (network_table[i]->interface == iface)) {
3137 			hso_net = dev2net(network_table[i]);
3138 			if (hso_net->flags & IFF_UP) {
3139 				/* First transmit any lingering data,
3140 				   then restart the device. */
3141 				if (hso_net->skb_tx_buf) {
3142 					dev_dbg(&iface->dev,
3143 						"Transmitting"
3144 						" lingering data\n");
3145 					hso_net_start_xmit(hso_net->skb_tx_buf,
3146 							   hso_net->net);
3147 					hso_net->skb_tx_buf = NULL;
3148 				}
3149 				result = hso_start_net_device(network_table[i]);
3150 				if (result)
3151 					goto out;
3152 			}
3153 		}
3154 	}
3155 
3156 out:
3157 	return result;
3158 }
3159 
3160 static void reset_device(struct work_struct *data)
3161 {
3162 	struct hso_device *hso_dev =
3163 	    container_of(data, struct hso_device, reset_device);
3164 	struct usb_device *usb = hso_dev->usb;
3165 	int result;
3166 
3167 	if (hso_dev->usb_gone) {
3168 		D1("No reset during disconnect\n");
3169 	} else {
3170 		result = usb_lock_device_for_reset(usb, hso_dev->interface);
3171 		if (result < 0)
3172 			D1("unable to lock device for reset: %d\n", result);
3173 		else {
3174 			usb_reset_device(usb);
3175 			usb_unlock_device(usb);
3176 		}
3177 	}
3178 }
3179 
3180 static void hso_serial_ref_free(struct kref *ref)
3181 {
3182 	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
3183 
3184 	hso_free_serial_device(hso_dev);
3185 }
3186 
3187 static void hso_free_interface(struct usb_interface *interface)
3188 {
3189 	struct hso_serial *hso_dev;
3190 	struct tty_struct *tty;
3191 	int i;
3192 
3193 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3194 		if (serial_table[i] &&
3195 		    (serial_table[i]->interface == interface)) {
3196 			hso_dev = dev2ser(serial_table[i]);
3197 			spin_lock_irq(&hso_dev->serial_lock);
3198 			tty = tty_kref_get(hso_dev->tty);
3199 			spin_unlock_irq(&hso_dev->serial_lock);
3200 			if (tty)
3201 				tty_hangup(tty);
3202 			mutex_lock(&hso_dev->parent->mutex);
3203 			tty_kref_put(tty);
3204 			hso_dev->parent->usb_gone = 1;
3205 			mutex_unlock(&hso_dev->parent->mutex);
3206 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
3207 		}
3208 	}
3209 
3210 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3211 		if (network_table[i] &&
3212 		    (network_table[i]->interface == interface)) {
3213 			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
3214 			/* hso_stop_net_device doesn't stop the net queue since
3215 			 * traffic needs to start it again when suspended */
3216 			netif_stop_queue(dev2net(network_table[i])->net);
3217 			hso_stop_net_device(network_table[i]);
3218 			cancel_work_sync(&network_table[i]->async_put_intf);
3219 			cancel_work_sync(&network_table[i]->async_get_intf);
3220 			if (rfk) {
3221 				rfkill_unregister(rfk);
3222 				rfkill_destroy(rfk);
3223 			}
3224 			hso_free_net_device(network_table[i]);
3225 		}
3226 	}
3227 }
3228 
3229 /* Helper functions */
3230 
3231 /* Get the endpoint ! */
3232 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
3233 						  int type, int dir)
3234 {
3235 	int i;
3236 	struct usb_host_interface *iface = intf->cur_altsetting;
3237 	struct usb_endpoint_descriptor *endp;
3238 
3239 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3240 		endp = &iface->endpoint[i].desc;
3241 		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
3242 		    (usb_endpoint_type(endp) == type))
3243 			return endp;
3244 	}
3245 
3246 	return NULL;
3247 }
3248 
3249 /* Get the byte that describes which ports are enabled */
3250 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
3251 {
3252 	int i;
3253 	struct usb_host_interface *iface = intf->cur_altsetting;
3254 
3255 	if (iface->extralen == 3) {
3256 		*ports = iface->extra[2];
3257 		return 0;
3258 	}
3259 
3260 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3261 		if (iface->endpoint[i].extralen == 3) {
3262 			*ports = iface->endpoint[i].extra[2];
3263 			return 0;
3264 		}
3265 	}
3266 
3267 	return -1;
3268 }
3269 
3270 /* interrupt urb needs to be submitted, used for serial read of muxed port */
3271 static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
3272 				   struct usb_device *usb, gfp_t gfp)
3273 {
3274 	int result;
3275 
3276 	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
3277 			 usb_rcvintpipe(usb,
3278 				shared_int->intr_endp->bEndpointAddress & 0x7F),
3279 			 shared_int->shared_intr_buf,
3280 			 1,
3281 			 intr_callback, shared_int,
3282 			 shared_int->intr_endp->bInterval);
3283 
3284 	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
3285 	if (result)
3286 		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
3287 			result);
3288 
3289 	return result;
3290 }
3291 
3292 /* operations setup of the serial interface */
3293 static const struct tty_operations hso_serial_ops = {
3294 	.open = hso_serial_open,
3295 	.close = hso_serial_close,
3296 	.write = hso_serial_write,
3297 	.write_room = hso_serial_write_room,
3298 	.ioctl = hso_serial_ioctl,
3299 	.set_termios = hso_serial_set_termios,
3300 	.chars_in_buffer = hso_serial_chars_in_buffer,
3301 	.tiocmget = hso_serial_tiocmget,
3302 	.tiocmset = hso_serial_tiocmset,
3303 	.unthrottle = hso_unthrottle
3304 };
3305 
3306 static struct usb_driver hso_driver = {
3307 	.name = driver_name,
3308 	.probe = hso_probe,
3309 	.disconnect = hso_disconnect,
3310 	.id_table = hso_ids,
3311 	.suspend = hso_suspend,
3312 	.resume = hso_resume,
3313 	.reset_resume = hso_resume,
3314 	.supports_autosuspend = 1,
3315 };
3316 
3317 static int __init hso_init(void)
3318 {
3319 	int i;
3320 	int result;
3321 
3322 	/* put it in the log */
3323 	printk(KERN_INFO "hso: %s\n", version);
3324 
3325 	/* Initialise the serial table semaphore and table */
3326 	spin_lock_init(&serial_table_lock);
3327 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
3328 		serial_table[i] = NULL;
3329 
3330 	/* allocate our driver using the proper amount of supported minors */
3331 	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
3332 	if (!tty_drv)
3333 		return -ENOMEM;
3334 
3335 	/* fill in all needed values */
3336 	tty_drv->magic = TTY_DRIVER_MAGIC;
3337 	tty_drv->owner = THIS_MODULE;
3338 	tty_drv->driver_name = driver_name;
3339 	tty_drv->name = tty_filename;
3340 
3341 	/* if major number is provided as parameter, use that one */
3342 	if (tty_major)
3343 		tty_drv->major = tty_major;
3344 
3345 	tty_drv->minor_start = 0;
3346 	tty_drv->num = HSO_SERIAL_TTY_MINORS;
3347 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
3348 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
3349 	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3350 	tty_drv->init_termios = tty_std_termios;
3351 	hso_init_termios(&tty_drv->init_termios);
3352 	tty_set_operations(tty_drv, &hso_serial_ops);
3353 
3354 	/* register the tty driver */
3355 	result = tty_register_driver(tty_drv);
3356 	if (result) {
3357 		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
3358 			__func__, result);
3359 		return result;
3360 	}
3361 
3362 	/* register this module as an usb driver */
3363 	result = usb_register(&hso_driver);
3364 	if (result) {
3365 		printk(KERN_ERR "Could not register hso driver? error: %d\n",
3366 			result);
3367 		/* cleanup serial interface */
3368 		tty_unregister_driver(tty_drv);
3369 		return result;
3370 	}
3371 
3372 	/* done */
3373 	return 0;
3374 }
3375 
3376 static void __exit hso_exit(void)
3377 {
3378 	printk(KERN_INFO "hso: unloaded\n");
3379 
3380 	tty_unregister_driver(tty_drv);
3381 	/* deregister the usb driver */
3382 	usb_deregister(&hso_driver);
3383 }
3384 
3385 /* Module definitions */
3386 module_init(hso_init);
3387 module_exit(hso_exit);
3388 
3389 MODULE_AUTHOR(MOD_AUTHOR);
3390 MODULE_DESCRIPTION(MOD_DESCRIPTION);
3391 MODULE_LICENSE(MOD_LICENSE);
3392 
3393 /* change the debug level (eg: insmod hso.ko debug=0x04) */
3394 MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
3395 module_param(debug, int, S_IRUGO | S_IWUSR);
3396 
3397 /* set the major tty number (eg: insmod hso.ko tty_major=245) */
3398 MODULE_PARM_DESC(tty_major, "Set the major tty number");
3399 module_param(tty_major, int, S_IRUGO | S_IWUSR);
3400 
3401 /* disable network interface (eg: insmod hso.ko disable_net=1) */
3402 MODULE_PARM_DESC(disable_net, "Disable the network interface");
3403 module_param(disable_net, int, S_IRUGO | S_IWUSR);
3404