1 /* linux/drivers/mtd/maps/scx200_docflash.c 2 3 Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> 4 5 $Id: scx200_docflash.c,v 1.10 2004/11/28 09:40:40 dwmw2 Exp $ 6 7 National Semiconductor SCx200 flash mapped with DOCCS 8 */ 9 10 #include <linux/module.h> 11 #include <linux/config.h> 12 #include <linux/types.h> 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <asm/io.h> 16 #include <linux/mtd/mtd.h> 17 #include <linux/mtd/map.h> 18 #include <linux/mtd/partitions.h> 19 20 #include <linux/pci.h> 21 #include <linux/scx200.h> 22 23 #define NAME "scx200_docflash" 24 25 MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>"); 26 MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver"); 27 MODULE_LICENSE("GPL"); 28 29 static int probe = 0; /* Don't autoprobe */ 30 static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */ 31 static unsigned width = 8; /* Default to 8 bits wide */ 32 static char *flashtype = "cfi_probe"; 33 34 module_param(probe, int, 0); 35 MODULE_PARM_DESC(probe, "Probe for a BIOS mapping"); 36 module_param(size, int, 0); 37 MODULE_PARM_DESC(size, "Size of the flash mapping"); 38 module_param(width, int, 0); 39 MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)"); 40 module_param(flashtype, charp, 0); 41 MODULE_PARM_DESC(flashtype, "Type of MTD probe to do"); 42 43 static struct resource docmem = { 44 .flags = IORESOURCE_MEM, 45 .name = "NatSemi SCx200 DOCCS Flash", 46 }; 47 48 static struct mtd_info *mymtd; 49 50 #ifdef CONFIG_MTD_PARTITIONS 51 static struct mtd_partition partition_info[] = { 52 { 53 .name = "DOCCS Boot kernel", 54 .offset = 0, 55 .size = 0xc0000 56 }, 57 { 58 .name = "DOCCS Low BIOS", 59 .offset = 0xc0000, 60 .size = 0x40000 61 }, 62 { 63 .name = "DOCCS File system", 64 .offset = 0x100000, 65 .size = ~0 /* calculate from flash size */ 66 }, 67 { 68 .name = "DOCCS High BIOS", 69 .offset = ~0, /* calculate from flash size */ 70 .size = 0x80000 71 }, 72 }; 73 #define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0])) 74 #endif 75 76 77 static struct map_info scx200_docflash_map = { 78 .name = "NatSemi SCx200 DOCCS Flash", 79 }; 80 81 static int __init init_scx200_docflash(void) 82 { 83 unsigned u; 84 unsigned base; 85 unsigned ctrl; 86 unsigned pmr; 87 struct pci_dev *bridge; 88 89 printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n"); 90 91 if ((bridge = pci_find_device(PCI_VENDOR_ID_NS, 92 PCI_DEVICE_ID_NS_SCx200_BRIDGE, 93 NULL)) == NULL) 94 return -ENODEV; 95 96 /* check that we have found the configuration block */ 97 if (!scx200_cb_present()) 98 return -ENODEV; 99 100 if (probe) { 101 /* Try to use the present flash mapping if any */ 102 pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base); 103 pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl); 104 pmr = inl(scx200_cb_base + SCx200_PMR); 105 106 if (base == 0 107 || (ctrl & 0x07000000) != 0x07000000 108 || (ctrl & 0x0007ffff) == 0) 109 return -ENODEV; 110 111 size = ((ctrl&0x1fff)<<13) + (1<<13); 112 113 for (u = size; u > 1; u >>= 1) 114 ; 115 if (u != 1) 116 return -ENODEV; 117 118 if (pmr & (1<<6)) 119 width = 16; 120 else 121 width = 8; 122 123 docmem.start = base; 124 docmem.end = base + size; 125 126 if (request_resource(&iomem_resource, &docmem)) { 127 printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); 128 return -ENOMEM; 129 } 130 } else { 131 for (u = size; u > 1; u >>= 1) 132 ; 133 if (u != 1) { 134 printk(KERN_ERR NAME ": invalid size for flash mapping\n"); 135 return -EINVAL; 136 } 137 138 if (width != 8 && width != 16) { 139 printk(KERN_ERR NAME ": invalid bus width for flash mapping\n"); 140 return -EINVAL; 141 } 142 143 if (allocate_resource(&iomem_resource, &docmem, 144 size, 145 0xc0000000, 0xffffffff, 146 size, NULL, NULL)) { 147 printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); 148 return -ENOMEM; 149 } 150 151 ctrl = 0x07000000 | ((size-1) >> 13); 152 153 printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl); 154 155 pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start); 156 pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl); 157 pmr = inl(scx200_cb_base + SCx200_PMR); 158 159 if (width == 8) { 160 pmr &= ~(1<<6); 161 } else { 162 pmr |= (1<<6); 163 } 164 outl(pmr, scx200_cb_base + SCx200_PMR); 165 } 166 167 printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n", 168 docmem.start, docmem.end, width); 169 170 scx200_docflash_map.size = size; 171 if (width == 8) 172 scx200_docflash_map.bankwidth = 1; 173 else 174 scx200_docflash_map.bankwidth = 2; 175 176 simple_map_init(&scx200_docflash_map); 177 178 scx200_docflash_map.phys = docmem.start; 179 scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size); 180 if (!scx200_docflash_map.virt) { 181 printk(KERN_ERR NAME ": failed to ioremap the flash\n"); 182 release_resource(&docmem); 183 return -EIO; 184 } 185 186 mymtd = do_map_probe(flashtype, &scx200_docflash_map); 187 if (!mymtd) { 188 printk(KERN_ERR NAME ": unable to detect flash\n"); 189 iounmap(scx200_docflash_map.virt); 190 release_resource(&docmem); 191 return -ENXIO; 192 } 193 194 if (size < mymtd->size) 195 printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n"); 196 197 mymtd->owner = THIS_MODULE; 198 199 #ifdef CONFIG_MTD_PARTITIONS 200 partition_info[3].offset = mymtd->size-partition_info[3].size; 201 partition_info[2].size = partition_info[3].offset-partition_info[2].offset; 202 add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS); 203 #else 204 add_mtd_device(mymtd); 205 #endif 206 return 0; 207 } 208 209 static void __exit cleanup_scx200_docflash(void) 210 { 211 if (mymtd) { 212 #ifdef CONFIG_MTD_PARTITIONS 213 del_mtd_partitions(mymtd); 214 #else 215 del_mtd_device(mymtd); 216 #endif 217 map_destroy(mymtd); 218 } 219 if (scx200_docflash_map.virt) { 220 iounmap(scx200_docflash_map.virt); 221 release_resource(&docmem); 222 } 223 } 224 225 module_init(init_scx200_docflash); 226 module_exit(cleanup_scx200_docflash); 227 228 /* 229 Local variables: 230 compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules" 231 c-basic-offset: 8 232 End: 233 */ 234