xref: /openbmc/linux/drivers/message/fusion/mptspi.c (revision 213aaca3e5727f3eb56002b04a1405db34a54ed8)
1 /*
2  *  linux/drivers/message/fusion/mptspi.c
3  *      For use with LSI PCI chip/adapter(s)
4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
5  *
6  *  Copyright (c) 1999-2008 LSI Corporation
7  *  (mailto:DL-MPTFusionLinux@lsi.com)
8  *
9  */
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11 /*
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; version 2 of the License.
15 
16     This program is distributed in the hope that it will be useful,
17     but WITHOUT ANY WARRANTY; without even the implied warranty of
18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19     GNU General Public License for more details.
20 
21     NO WARRANTY
22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26     solely responsible for determining the appropriateness of using and
27     distributing the Program and assumes all risks associated with its
28     exercise of rights under this Agreement, including but not limited to
29     the risks and costs of program errors, damage to or loss of data,
30     programs or equipment, and unavailability or interruption of operations.
31 
32     DISCLAIMER OF LIABILITY
33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40 
41     You should have received a copy of the GNU General Public License
42     along with this program; if not, write to the Free Software
43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
44 */
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46 
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>	/* for mdelay */
55 #include <linux/interrupt.h>	/* needed for in_interrupt() proto */
56 #include <linux/reboot.h>	/* notifier code */
57 #include <linux/workqueue.h>
58 #include <linux/raid_class.h>
59 
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_device.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_tcq.h>
65 #include <scsi/scsi_transport.h>
66 #include <scsi/scsi_transport_spi.h>
67 #include <scsi/scsi_dbg.h>
68 
69 #include "mptbase.h"
70 #include "mptscsih.h"
71 
72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73 #define my_NAME		"Fusion MPT SPI Host driver"
74 #define my_VERSION	MPT_LINUX_VERSION_COMMON
75 #define MYNAM		"mptspi"
76 
77 MODULE_AUTHOR(MODULEAUTHOR);
78 MODULE_DESCRIPTION(my_NAME);
79 MODULE_LICENSE("GPL");
80 MODULE_VERSION(my_VERSION);
81 
82 /* Command line args */
83 static int mpt_saf_te = MPTSCSIH_SAF_TE;
84 module_param(mpt_saf_te, int, 0);
85 MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1  (default=MPTSCSIH_SAF_TE=0)");
86 
87 static void mptspi_write_offset(struct scsi_target *, int);
88 static void mptspi_write_width(struct scsi_target *, int);
89 static int mptspi_write_spi_device_pg1(struct scsi_target *,
90 				       struct _CONFIG_PAGE_SCSI_DEVICE_1 *);
91 
92 static struct scsi_transport_template *mptspi_transport_template = NULL;
93 
94 static u8	mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
95 static u8	mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
96 static u8	mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
97 
98 /**
99  * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters
100  *	@hd: Pointer to a SCSI Host Structure
101  *	@target: per target private data
102  *	@sdev: SCSI device
103  *
104  * 	Update the target negotiation parameters based on the the Inquiry
105  *	data, adapter capabilities, and NVRAM settings.
106  **/
107 static void
108 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
109 			    struct scsi_device *sdev)
110 {
111 	MPT_ADAPTER *ioc = hd->ioc;
112 	SpiCfgData *pspi_data = &ioc->spi_data;
113 	int  id = (int) target->id;
114 	int  nvram;
115 	u8 width = MPT_NARROW;
116 	u8 factor = MPT_ASYNC;
117 	u8 offset = 0;
118 	u8 nfactor;
119 	u8 noQas = 1;
120 
121 	target->negoFlags = pspi_data->noQas;
122 
123 	if (sdev->scsi_level < SCSI_2) {
124 		width = 0;
125 		factor = MPT_ULTRA2;
126 		offset = pspi_data->maxSyncOffset;
127 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
128 	} else {
129 		if (scsi_device_wide(sdev))
130 			width = 1;
131 
132 		if (scsi_device_sync(sdev)) {
133 			factor = pspi_data->minSyncFactor;
134 			if (!scsi_device_dt(sdev))
135 					factor = MPT_ULTRA2;
136 			else {
137 				if (!scsi_device_ius(sdev) &&
138 				    !scsi_device_qas(sdev))
139 					factor = MPT_ULTRA160;
140 				else {
141 					factor = MPT_ULTRA320;
142 					if (scsi_device_qas(sdev)) {
143 						ddvprintk(ioc,
144 						printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to "
145 						"byte56=%02x on id=%d!\n", ioc->name,
146 						scsi_device_qas(sdev), id));
147 						noQas = 0;
148 					}
149 					if (sdev->type == TYPE_TAPE &&
150 					    scsi_device_ius(sdev))
151 						target->negoFlags |= MPT_TAPE_NEGO_IDP;
152 				}
153 			}
154 			offset = pspi_data->maxSyncOffset;
155 
156 			/* If RAID, never disable QAS
157 			 * else if non RAID, do not disable
158 			 *   QAS if bit 1 is set
159 			 * bit 1 QAS support, non-raid only
160 			 * bit 0 IU support
161 			 */
162 			if (target->raidVolume == 1)
163 				noQas = 0;
164 		} else {
165 			factor = MPT_ASYNC;
166 			offset = 0;
167 		}
168 	}
169 
170 	if (!sdev->tagged_supported)
171 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
172 
173 	/* Update tflags based on NVRAM settings. (SCSI only)
174 	 */
175 	if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
176 		nvram = pspi_data->nvram[id];
177 		nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
178 
179 		if (width)
180 			width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
181 
182 		if (offset > 0) {
183 			/* Ensure factor is set to the
184 			 * maximum of: adapter, nvram, inquiry
185 			 */
186 			if (nfactor) {
187 				if (nfactor < pspi_data->minSyncFactor )
188 					nfactor = pspi_data->minSyncFactor;
189 
190 				factor = max(factor, nfactor);
191 				if (factor == MPT_ASYNC)
192 					offset = 0;
193 			} else {
194 				offset = 0;
195 				factor = MPT_ASYNC;
196 		}
197 		} else {
198 			factor = MPT_ASYNC;
199 		}
200 	}
201 
202 	/* Make sure data is consistent
203 	 */
204 	if ((!width) && (factor < MPT_ULTRA2))
205 		factor = MPT_ULTRA2;
206 
207 	/* Save the data to the target structure.
208 	 */
209 	target->minSyncFactor = factor;
210 	target->maxOffset = offset;
211 	target->maxWidth = width;
212 
213 	spi_min_period(scsi_target(sdev)) = factor;
214 	spi_max_offset(scsi_target(sdev)) = offset;
215 	spi_max_width(scsi_target(sdev)) = width;
216 
217 	target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
218 
219 	/* Disable unused features.
220 	 */
221 	if (!width)
222 		target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
223 
224 	if (!offset)
225 		target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
226 
227 	if ( factor > MPT_ULTRA320 )
228 		noQas = 0;
229 
230 	if (noQas && (pspi_data->noQas == 0)) {
231 		pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
232 		target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
233 
234 		/* Disable QAS in a mixed configuration case
235 		 */
236 
237 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
238 			"Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id));
239 	}
240 }
241 
242 /**
243  * 	mptspi_writeIOCPage4  - write IOC Page 4
244  *	@hd: Pointer to a SCSI Host Structure
245  *	@channel: channel number
246  *	@id: write IOC Page4 for this ID & Bus
247  *
248  *	Return: -EAGAIN if unable to obtain a Message Frame
249  *		or 0 if success.
250  *
251  *	Remark: We do not wait for a return, write pages sequentially.
252  **/
253 static int
254 mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
255 {
256 	MPT_ADAPTER		*ioc = hd->ioc;
257 	Config_t		*pReq;
258 	IOCPage4_t		*IOCPage4Ptr;
259 	MPT_FRAME_HDR		*mf;
260 	dma_addr_t		 dataDma;
261 	u16			 req_idx;
262 	u32			 frameOffset;
263 	u32			 flagsLength;
264 	int			 ii;
265 
266 	/* Get a MF for this command.
267 	 */
268 	if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
269 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
270 				"writeIOCPage4 : no msg frames!\n",ioc->name));
271 		return -EAGAIN;
272 	}
273 
274 	/* Set the request and the data pointers.
275 	 * Place data at end of MF.
276 	 */
277 	pReq = (Config_t *)mf;
278 
279 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
280 	frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
281 
282 	/* Complete the request frame (same for all requests).
283 	 */
284 	pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
285 	pReq->Reserved = 0;
286 	pReq->ChainOffset = 0;
287 	pReq->Function = MPI_FUNCTION_CONFIG;
288 	pReq->ExtPageLength = 0;
289 	pReq->ExtPageType = 0;
290 	pReq->MsgFlags = 0;
291 	for (ii=0; ii < 8; ii++) {
292 		pReq->Reserved2[ii] = 0;
293 	}
294 
295 	IOCPage4Ptr = ioc->spi_data.pIocPg4;
296 	dataDma = ioc->spi_data.IocPg4_dma;
297 	ii = IOCPage4Ptr->ActiveSEP++;
298 	IOCPage4Ptr->SEP[ii].SEPTargetID = id;
299 	IOCPage4Ptr->SEP[ii].SEPBus = channel;
300 	pReq->Header = IOCPage4Ptr->Header;
301 	pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
302 
303 	/* Add a SGE to the config request.
304 	 */
305 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
306 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
307 
308 	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
309 
310 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
311 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
312 		ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
313 
314 	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
315 
316 	return 0;
317 }
318 
319 /**
320  *	mptspi_initTarget - Target, LUN alloc/free functionality.
321  *	@hd: Pointer to MPT_SCSI_HOST structure
322  *	@vtarget: per target private data
323  *	@sdev: SCSI device
324  *
325  *	NOTE: It's only SAFE to call this routine if data points to
326  *	sane & valid STANDARD INQUIRY data!
327  *
328  *	Allocate and initialize memory for this target.
329  *	Save inquiry data.
330  *
331  **/
332 static void
333 mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
334 		    struct scsi_device *sdev)
335 {
336 
337 	/* Is LUN supported? If so, upper 2 bits will be 0
338 	* in first byte of inquiry data.
339 	*/
340 	if (sdev->inq_periph_qual != 0)
341 		return;
342 
343 	if (vtarget == NULL)
344 		return;
345 
346 	vtarget->type = sdev->type;
347 
348 	if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
349 		/* Treat all Processors as SAF-TE if
350 		 * command line option is set */
351 		vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
352 		mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
353 	}else if ((sdev->type == TYPE_PROCESSOR) &&
354 		!(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
355 		if (sdev->inquiry_len > 49 ) {
356 			if (sdev->inquiry[44] == 'S' &&
357 			    sdev->inquiry[45] == 'A' &&
358 			    sdev->inquiry[46] == 'F' &&
359 			    sdev->inquiry[47] == '-' &&
360 			    sdev->inquiry[48] == 'T' &&
361 			    sdev->inquiry[49] == 'E' ) {
362 				vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
363 				mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
364 			}
365 		}
366 	}
367 	mptspi_setTargetNegoParms(hd, vtarget, sdev);
368 }
369 
370 /**
371  *	mptspi_is_raid - Determines whether target is belonging to volume
372  *	@hd: Pointer to a SCSI HOST structure
373  *	@id: target device id
374  *
375  *	Return:
376  *		non-zero = true
377  *		zero = false
378  *
379  */
380 static int
381 mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id)
382 {
383 	int i, rc = 0;
384 	MPT_ADAPTER *ioc = hd->ioc;
385 
386 	if (!ioc->raid_data.pIocPg2)
387 		goto out;
388 
389 	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
390 		goto out;
391 	for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
392 		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
393 			rc = 1;
394 			goto out;
395 		}
396 	}
397 
398  out:
399 	return rc;
400 }
401 
402 static int mptspi_target_alloc(struct scsi_target *starget)
403 {
404 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
405 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
406 	VirtTarget		*vtarget;
407 	MPT_ADAPTER *ioc;
408 
409 	if (hd == NULL)
410 		return -ENODEV;
411 
412 	ioc = hd->ioc;
413 	vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
414 	if (!vtarget)
415 		return -ENOMEM;
416 
417 	vtarget->ioc_id = ioc->id;
418 	vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
419 	vtarget->id = (u8)starget->id;
420 	vtarget->channel = (u8)starget->channel;
421 	vtarget->starget = starget;
422 	starget->hostdata = vtarget;
423 
424 	if (starget->channel == 1) {
425 		if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0)
426 			return 0;
427 		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
428 		/* The real channel for this device is zero */
429 		vtarget->channel = 0;
430 		/* The actual physdisknum (for RAID passthrough) */
431 		vtarget->id = mptscsih_raid_id_to_num(ioc, 0,
432 		    starget->id);
433 	}
434 
435 	if (starget->channel == 0 &&
436 	    mptspi_is_raid(hd, starget->id)) {
437 		vtarget->raidVolume = 1;
438 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
439 		    "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel,
440 		    starget->id));
441 	}
442 
443 	if (ioc->spi_data.nvram &&
444 	    ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) {
445 		u32 nvram = ioc->spi_data.nvram[starget->id];
446 		spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
447 		spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
448 	} else {
449 		spi_min_period(starget) = ioc->spi_data.minSyncFactor;
450 		spi_max_width(starget) = ioc->spi_data.maxBusWidth;
451 	}
452 	spi_max_offset(starget) = ioc->spi_data.maxSyncOffset;
453 
454 	spi_offset(starget) = 0;
455 	spi_period(starget) = 0xFF;
456 	mptspi_write_width(starget, 0);
457 
458 	return 0;
459 }
460 
461 static void
462 mptspi_target_destroy(struct scsi_target *starget)
463 {
464 	if (starget->hostdata)
465 		kfree(starget->hostdata);
466 	starget->hostdata = NULL;
467 }
468 
469 /**
470  *	mptspi_print_write_nego - negotiation parameters debug info that is being sent
471  *	@hd: Pointer to a SCSI HOST structure
472  *	@starget: SCSI target
473  *	@ii: negotiation parameters
474  *
475  */
476 static void
477 mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
478 {
479 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x"
480 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
481 	    hd->ioc->name, starget->id, ii,
482 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
483 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
484 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
485 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
486 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
487 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
488 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
489 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
490 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
491 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
492 }
493 
494 /**
495  *	mptspi_print_read_nego - negotiation parameters debug info that is being read
496  *	@hd: Pointer to a SCSI HOST structure
497  *	@starget: SCSI target
498  *	@ii: negotiation parameters
499  *
500  */
501 static void
502 mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
503 {
504 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x"
505 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
506 	    hd->ioc->name, starget->id, ii,
507 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
508 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
509 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
510 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
511 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
512 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
513 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
514 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
515 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
516 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
517 }
518 
519 static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
520 			     struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0)
521 {
522 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
523 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
524 	struct _MPT_ADAPTER *ioc = hd->ioc;
525 	struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0;
526 	dma_addr_t spi_dev_pg0_dma;
527 	int size;
528 	struct _x_config_parms cfg;
529 	struct _CONFIG_PAGE_HEADER hdr;
530 	int err = -EBUSY;
531 
532 	/* No SPI parameters for RAID devices */
533 	if (starget->channel == 0 &&
534 	    mptspi_is_raid(hd, starget->id))
535 		return -1;
536 
537 	size = ioc->spi_data.sdp0length * 4;
538 	/*
539 	if (ioc->spi_data.sdp0length & 1)
540 		size += size + 4;
541 	size += 2048;
542 	*/
543 
544 	spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL);
545 	if (spi_dev_pg0 == NULL) {
546 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
547 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
548 		return -EINVAL;
549 	}
550 
551 	memset(&hdr, 0, sizeof(hdr));
552 
553 	hdr.PageVersion = ioc->spi_data.sdp0version;
554 	hdr.PageLength = ioc->spi_data.sdp0length;
555 	hdr.PageNumber = 0;
556 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
557 
558 	memset(&cfg, 0, sizeof(cfg));
559 
560 	cfg.cfghdr.hdr = &hdr;
561 	cfg.physAddr = spi_dev_pg0_dma;
562 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
563 	cfg.dir = 0;
564 	cfg.pageAddr = starget->id;
565 	cfg.timeout = 60;
566 
567 	if (mpt_config(ioc, &cfg)) {
568 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name);
569 		goto out_free;
570 	}
571 	err = 0;
572 	memcpy(pass_pg0, spi_dev_pg0, size);
573 
574 	mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters));
575 
576  out_free:
577 	dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma);
578 	return err;
579 }
580 
581 static u32 mptspi_getRP(struct scsi_target *starget)
582 {
583 	u32 nego = 0;
584 
585 	nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0;
586 	nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0;
587 	nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0;
588 	nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0;
589 	nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0;
590 	nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0;
591 	nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0;
592 	nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0;
593 
594 	nego |= (spi_period(starget) <<  MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
595 	nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
596 	nego |= spi_width(starget) ?  MPI_SCSIDEVPAGE1_RP_WIDE : 0;
597 
598 	return nego;
599 }
600 
601 static void mptspi_read_parameters(struct scsi_target *starget)
602 {
603 	int nego;
604 	struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0;
605 
606 	mptspi_read_spi_device_pg0(starget, &spi_dev_pg0);
607 
608 	nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters);
609 
610 	spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0;
611 	spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0;
612 	spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0;
613 	spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0;
614 	spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0;
615 	spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0;
616 	spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0;
617 	spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0;
618 	spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD;
619 	spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET;
620 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
621 }
622 
623 int
624 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
625 {
626 	MPT_ADAPTER	*ioc = hd->ioc;
627 	MpiRaidActionRequest_t	*pReq;
628 	MPT_FRAME_HDR		*mf;
629 	int			ret;
630 	unsigned long 	 	timeleft;
631 
632 	mutex_lock(&ioc->internal_cmds.mutex);
633 
634 	/* Get and Populate a free Frame
635 	 */
636 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
637 		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
638 			"%s: no msg frames!\n", ioc->name, __func__));
639 		ret = -EAGAIN;
640 		goto out;
641 	}
642 	pReq = (MpiRaidActionRequest_t *)mf;
643 	if (quiesce)
644 		pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO;
645 	else
646 		pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO;
647 	pReq->Reserved1 = 0;
648 	pReq->ChainOffset = 0;
649 	pReq->Function = MPI_FUNCTION_RAID_ACTION;
650 	pReq->VolumeID = id;
651 	pReq->VolumeBus = channel;
652 	pReq->PhysDiskNum = 0;
653 	pReq->MsgFlags = 0;
654 	pReq->Reserved2 = 0;
655 	pReq->ActionDataWord = 0; /* Reserved for this action */
656 
657 	ioc->add_sge((char *)&pReq->ActionDataSGE,
658 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
659 
660 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
661 			ioc->name, pReq->Action, channel, id));
662 
663 	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
664 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
665 	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
666 	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
667 		ret = -ETIME;
668 		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
669 		    ioc->name, __func__));
670 		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
671 			goto out;
672 		if (!timeleft) {
673 			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
674 			    ioc->name, __func__);
675 			mpt_HardResetHandler(ioc, CAN_SLEEP);
676 			mpt_free_msg_frame(ioc, mf);
677 		}
678 		goto out;
679 	}
680 
681 	ret = ioc->internal_cmds.completion_code;
682 
683  out:
684 	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
685 	mutex_unlock(&ioc->internal_cmds.mutex);
686 	return ret;
687 }
688 
689 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
690 			     struct scsi_device *sdev)
691 {
692 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
693 	MPT_ADAPTER *ioc = hd->ioc;
694 
695 	/* no DV on RAID devices */
696 	if (sdev->channel == 0 &&
697 	    mptspi_is_raid(hd, sdev->id))
698 		return;
699 
700 	/* If this is a piece of a RAID, then quiesce first */
701 	if (sdev->channel == 1 &&
702 	    mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) {
703 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
704 		    "Integrated RAID quiesce failed\n", ioc->name);
705 		return;
706 	}
707 
708 	hd->spi_pending |= (1 << sdev->id);
709 	spi_dv_device(sdev);
710 	hd->spi_pending &= ~(1 << sdev->id);
711 
712 	if (sdev->channel == 1 &&
713 	    mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
714 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
715 		    "Integrated RAID resume failed\n", ioc->name);
716 
717 	mptspi_read_parameters(sdev->sdev_target);
718 	spi_display_xfer_agreement(sdev->sdev_target);
719 	mptspi_read_parameters(sdev->sdev_target);
720 }
721 
722 static int mptspi_slave_alloc(struct scsi_device *sdev)
723 {
724 	MPT_SCSI_HOST *hd = shost_priv(sdev->host);
725 	VirtTarget		*vtarget;
726 	VirtDevice		*vdevice;
727 	struct scsi_target 	*starget;
728 	MPT_ADAPTER *ioc = hd->ioc;
729 
730 	if (sdev->channel == 1 &&
731 		mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0)
732 			return -ENXIO;
733 
734 	vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
735 	if (!vdevice) {
736 		printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
737 				ioc->name, sizeof(VirtDevice));
738 		return -ENOMEM;
739 	}
740 
741 	vdevice->lun = sdev->lun;
742 	sdev->hostdata = vdevice;
743 
744 	starget = scsi_target(sdev);
745 	vtarget = starget->hostdata;
746 	vdevice->vtarget = vtarget;
747 	vtarget->num_luns++;
748 
749 	if (sdev->channel == 1)
750 		sdev->no_uld_attach = 1;
751 
752 	return 0;
753 }
754 
755 static int mptspi_slave_configure(struct scsi_device *sdev)
756 {
757 	struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host);
758 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
759 	int ret;
760 
761 	mptspi_initTarget(hd, vtarget, sdev);
762 
763 	ret = mptscsih_slave_configure(sdev);
764 
765 	if (ret)
766 		return ret;
767 
768 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x"
769 		" max_offset=0x%02x max_width=%d\n", hd->ioc->name,
770 		sdev->id, spi_min_period(scsi_target(sdev)),
771 		spi_max_offset(scsi_target(sdev)),
772 		spi_max_width(scsi_target(sdev))));
773 
774 	if ((sdev->channel == 1 ||
775 	     !(mptspi_is_raid(hd, sdev->id))) &&
776 	    !spi_initial_dv(sdev->sdev_target))
777 		mptspi_dv_device(hd, sdev);
778 
779 	return 0;
780 }
781 
782 static int
783 mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
784 {
785 	struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host);
786 	VirtDevice	*vdevice = SCpnt->device->hostdata;
787 	MPT_ADAPTER *ioc = hd->ioc;
788 
789 	if (!vdevice || !vdevice->vtarget) {
790 		SCpnt->result = DID_NO_CONNECT << 16;
791 		done(SCpnt);
792 		return 0;
793 	}
794 
795 	if (SCpnt->device->channel == 1 &&
796 		mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) {
797 		SCpnt->result = DID_NO_CONNECT << 16;
798 		done(SCpnt);
799 		return 0;
800 	}
801 
802 	if (spi_dv_pending(scsi_target(SCpnt->device)))
803 		ddvprintk(ioc, scsi_print_command(SCpnt));
804 
805 	return mptscsih_qcmd(SCpnt,done);
806 }
807 
808 static void mptspi_slave_destroy(struct scsi_device *sdev)
809 {
810 	struct scsi_target *starget = scsi_target(sdev);
811 	VirtTarget *vtarget = starget->hostdata;
812 	VirtDevice *vdevice = sdev->hostdata;
813 
814 	/* Will this be the last lun on a non-raid device? */
815 	if (vtarget->num_luns == 1 && vdevice->configured_lun) {
816 		struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
817 
818 		/* Async Narrow */
819 		pg1.RequestedParameters = 0;
820 		pg1.Reserved = 0;
821 		pg1.Configuration = 0;
822 
823 		mptspi_write_spi_device_pg1(starget, &pg1);
824 	}
825 
826 	mptscsih_slave_destroy(sdev);
827 }
828 
829 static struct scsi_host_template mptspi_driver_template = {
830 	.module				= THIS_MODULE,
831 	.proc_name			= "mptspi",
832 	.proc_info			= mptscsih_proc_info,
833 	.name				= "MPT SPI Host",
834 	.info				= mptscsih_info,
835 	.queuecommand			= mptspi_qcmd,
836 	.target_alloc			= mptspi_target_alloc,
837 	.slave_alloc			= mptspi_slave_alloc,
838 	.slave_configure		= mptspi_slave_configure,
839 	.target_destroy			= mptspi_target_destroy,
840 	.slave_destroy			= mptspi_slave_destroy,
841 	.change_queue_depth 		= mptscsih_change_queue_depth,
842 	.eh_abort_handler		= mptscsih_abort,
843 	.eh_device_reset_handler	= mptscsih_dev_reset,
844 	.eh_bus_reset_handler		= mptscsih_bus_reset,
845 	.eh_host_reset_handler		= mptscsih_host_reset,
846 	.bios_param			= mptscsih_bios_param,
847 	.can_queue			= MPT_SCSI_CAN_QUEUE,
848 	.this_id			= -1,
849 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
850 	.max_sectors			= 8192,
851 	.cmd_per_lun			= 7,
852 	.use_clustering			= ENABLE_CLUSTERING,
853 	.shost_attrs			= mptscsih_host_attrs,
854 };
855 
856 static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
857 			       struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1)
858 {
859 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
860 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
861 	struct _MPT_ADAPTER *ioc = hd->ioc;
862 	struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1;
863 	dma_addr_t pg1_dma;
864 	int size;
865 	struct _x_config_parms cfg;
866 	struct _CONFIG_PAGE_HEADER hdr;
867 	int err = -EBUSY;
868 
869 	/* don't allow updating nego parameters on RAID devices */
870 	if (starget->channel == 0 &&
871 	    mptspi_is_raid(hd, starget->id))
872 		return -1;
873 
874 	size = ioc->spi_data.sdp1length * 4;
875 
876 	pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL);
877 	if (pg1 == NULL) {
878 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
879 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
880 		return -EINVAL;
881 	}
882 
883 	memset(&hdr, 0, sizeof(hdr));
884 
885 	hdr.PageVersion = ioc->spi_data.sdp1version;
886 	hdr.PageLength = ioc->spi_data.sdp1length;
887 	hdr.PageNumber = 1;
888 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
889 
890 	memset(&cfg, 0, sizeof(cfg));
891 
892 	cfg.cfghdr.hdr = &hdr;
893 	cfg.physAddr = pg1_dma;
894 	cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
895 	cfg.dir = 1;
896 	cfg.pageAddr = starget->id;
897 
898 	memcpy(pg1, pass_pg1, size);
899 
900 	pg1->Header.PageVersion = hdr.PageVersion;
901 	pg1->Header.PageLength = hdr.PageLength;
902 	pg1->Header.PageNumber = hdr.PageNumber;
903 	pg1->Header.PageType = hdr.PageType;
904 
905 	mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
906 
907 	if (mpt_config(ioc, &cfg)) {
908 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
909 		    "mpt_config failed\n", ioc->name);
910 		goto out_free;
911 	}
912 	err = 0;
913 
914  out_free:
915 	dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma);
916 	return err;
917 }
918 
919 static void mptspi_write_offset(struct scsi_target *starget, int offset)
920 {
921 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
922 	u32 nego;
923 
924 	if (offset < 0)
925 		offset = 0;
926 
927 	if (offset > 255)
928 		offset = 255;
929 
930 	if (spi_offset(starget) == -1)
931 		mptspi_read_parameters(starget);
932 
933 	spi_offset(starget) = offset;
934 
935 	nego = mptspi_getRP(starget);
936 
937 	pg1.RequestedParameters = cpu_to_le32(nego);
938 	pg1.Reserved = 0;
939 	pg1.Configuration = 0;
940 
941 	mptspi_write_spi_device_pg1(starget, &pg1);
942 }
943 
944 static void mptspi_write_period(struct scsi_target *starget, int period)
945 {
946 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
947 	u32 nego;
948 
949 	if (period < 8)
950 		period = 8;
951 
952 	if (period > 255)
953 		period = 255;
954 
955 	if (spi_period(starget) == -1)
956 		mptspi_read_parameters(starget);
957 
958 	if (period == 8) {
959 		spi_iu(starget) = 1;
960 		spi_dt(starget) = 1;
961 	} else if (period == 9) {
962 		spi_dt(starget) = 1;
963 	}
964 
965 	spi_period(starget) = period;
966 
967 	nego = mptspi_getRP(starget);
968 
969 	pg1.RequestedParameters = cpu_to_le32(nego);
970 	pg1.Reserved = 0;
971 	pg1.Configuration = 0;
972 
973 	mptspi_write_spi_device_pg1(starget, &pg1);
974 }
975 
976 static void mptspi_write_dt(struct scsi_target *starget, int dt)
977 {
978 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
979 	u32 nego;
980 
981 	if (spi_period(starget) == -1)
982 		mptspi_read_parameters(starget);
983 
984 	if (!dt && spi_period(starget) < 10)
985 		spi_period(starget) = 10;
986 
987 	spi_dt(starget) = dt;
988 
989 	nego = mptspi_getRP(starget);
990 
991 
992 	pg1.RequestedParameters = cpu_to_le32(nego);
993 	pg1.Reserved = 0;
994 	pg1.Configuration = 0;
995 
996 	mptspi_write_spi_device_pg1(starget, &pg1);
997 }
998 
999 static void mptspi_write_iu(struct scsi_target *starget, int iu)
1000 {
1001 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1002 	u32 nego;
1003 
1004 	if (spi_period(starget) == -1)
1005 		mptspi_read_parameters(starget);
1006 
1007 	if (!iu && spi_period(starget) < 9)
1008 		spi_period(starget) = 9;
1009 
1010 	spi_iu(starget) = iu;
1011 
1012 	nego = mptspi_getRP(starget);
1013 
1014 	pg1.RequestedParameters = cpu_to_le32(nego);
1015 	pg1.Reserved = 0;
1016 	pg1.Configuration = 0;
1017 
1018 	mptspi_write_spi_device_pg1(starget, &pg1);
1019 }
1020 
1021 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) 				\
1022 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
1023 {									\
1024 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;				\
1025 	u32 nego;							\
1026 									\
1027 	spi_##parm(starget) = parm;					\
1028 									\
1029 	nego = mptspi_getRP(starget);					\
1030 									\
1031 	pg1.RequestedParameters = cpu_to_le32(nego);			\
1032 	pg1.Reserved = 0;						\
1033 	pg1.Configuration = 0;						\
1034 									\
1035 	mptspi_write_spi_device_pg1(starget, &pg1);				\
1036 }
1037 
1038 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm)
1039 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow)
1040 MPTSPI_SIMPLE_TRANSPORT_PARM(rti)
1041 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs)
1042 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en)
1043 
1044 static void mptspi_write_qas(struct scsi_target *starget, int qas)
1045 {
1046 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1047 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1048 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
1049 	VirtTarget *vtarget = starget->hostdata;
1050 	u32 nego;
1051 
1052 	if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) ||
1053 	    hd->ioc->spi_data.noQas)
1054 		spi_qas(starget) = 0;
1055 	else
1056 		spi_qas(starget) = qas;
1057 
1058 	nego = mptspi_getRP(starget);
1059 
1060 	pg1.RequestedParameters = cpu_to_le32(nego);
1061 	pg1.Reserved = 0;
1062 	pg1.Configuration = 0;
1063 
1064 	mptspi_write_spi_device_pg1(starget, &pg1);
1065 }
1066 
1067 static void mptspi_write_width(struct scsi_target *starget, int width)
1068 {
1069 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1070 	u32 nego;
1071 
1072 	if (!width) {
1073 		spi_dt(starget) = 0;
1074 		if (spi_period(starget) < 10)
1075 			spi_period(starget) = 10;
1076 	}
1077 
1078 	spi_width(starget) = width;
1079 
1080 	nego = mptspi_getRP(starget);
1081 
1082 	pg1.RequestedParameters = cpu_to_le32(nego);
1083 	pg1.Reserved = 0;
1084 	pg1.Configuration = 0;
1085 
1086 	mptspi_write_spi_device_pg1(starget, &pg1);
1087 }
1088 
1089 struct work_queue_wrapper {
1090 	struct work_struct	work;
1091 	struct _MPT_SCSI_HOST	*hd;
1092 	int			disk;
1093 };
1094 
1095 static void mpt_work_wrapper(struct work_struct *work)
1096 {
1097 	struct work_queue_wrapper *wqw =
1098 		container_of(work, struct work_queue_wrapper, work);
1099 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1100 	MPT_ADAPTER *ioc = hd->ioc;
1101 	struct Scsi_Host *shost = ioc->sh;
1102 	struct scsi_device *sdev;
1103 	int disk = wqw->disk;
1104 	struct _CONFIG_PAGE_IOC_3 *pg3;
1105 
1106 	kfree(wqw);
1107 
1108 	mpt_findImVolumes(ioc);
1109 	pg3 = ioc->raid_data.pIocPg3;
1110 	if (!pg3)
1111 		return;
1112 
1113 	shost_for_each_device(sdev,shost) {
1114 		struct scsi_target *starget = scsi_target(sdev);
1115 		VirtTarget *vtarget = starget->hostdata;
1116 
1117 		/* only want to search RAID components */
1118 		if (sdev->channel != 1)
1119 			continue;
1120 
1121 		/* The id is the raid PhysDiskNum, even if
1122 		 * starget->id is the actual target address */
1123 		if(vtarget->id != disk)
1124 			continue;
1125 
1126 		starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT
1127 		    "Integrated RAID requests DV of new device\n", ioc->name);
1128 		mptspi_dv_device(hd, sdev);
1129 	}
1130 	shost_printk(KERN_INFO, shost, MYIOC_s_FMT
1131 	    "Integrated RAID detects new device %d\n", ioc->name, disk);
1132 	scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, 1);
1133 }
1134 
1135 
1136 static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk)
1137 {
1138 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1139 	MPT_ADAPTER *ioc = hd->ioc;
1140 
1141 	if (!wqw) {
1142 		shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT
1143 		    "Failed to act on RAID event for physical disk %d\n",
1144 		    ioc->name, disk);
1145 		return;
1146 	}
1147 	INIT_WORK(&wqw->work, mpt_work_wrapper);
1148 	wqw->hd = hd;
1149 	wqw->disk = disk;
1150 
1151 	schedule_work(&wqw->work);
1152 }
1153 
1154 static int
1155 mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
1156 {
1157 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
1158 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1159 
1160 	if (ioc->bus_type != SPI)
1161 		return 0;
1162 
1163 	if (hd && event ==  MPI_EVENT_INTEGRATED_RAID) {
1164 		int reason
1165 			= (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
1166 
1167 		if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
1168 			int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
1169 			mpt_dv_raid(hd, disk);
1170 		}
1171 	}
1172 	return mptscsih_event_process(ioc, pEvReply);
1173 }
1174 
1175 static int
1176 mptspi_deny_binding(struct scsi_target *starget)
1177 {
1178 	struct _MPT_SCSI_HOST *hd =
1179 		(struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata;
1180 	return ((mptspi_is_raid(hd, starget->id)) &&
1181 		starget->channel == 0) ? 1 : 0;
1182 }
1183 
1184 static struct spi_function_template mptspi_transport_functions = {
1185 	.get_offset	= mptspi_read_parameters,
1186 	.set_offset	= mptspi_write_offset,
1187 	.show_offset	= 1,
1188 	.get_period	= mptspi_read_parameters,
1189 	.set_period	= mptspi_write_period,
1190 	.show_period	= 1,
1191 	.get_width	= mptspi_read_parameters,
1192 	.set_width	= mptspi_write_width,
1193 	.show_width	= 1,
1194 	.get_iu		= mptspi_read_parameters,
1195 	.set_iu		= mptspi_write_iu,
1196 	.show_iu	= 1,
1197 	.get_dt		= mptspi_read_parameters,
1198 	.set_dt		= mptspi_write_dt,
1199 	.show_dt	= 1,
1200 	.get_qas	= mptspi_read_parameters,
1201 	.set_qas	= mptspi_write_qas,
1202 	.show_qas	= 1,
1203 	.get_wr_flow	= mptspi_read_parameters,
1204 	.set_wr_flow	= mptspi_write_wr_flow,
1205 	.show_wr_flow	= 1,
1206 	.get_rd_strm	= mptspi_read_parameters,
1207 	.set_rd_strm	= mptspi_write_rd_strm,
1208 	.show_rd_strm	= 1,
1209 	.get_rti	= mptspi_read_parameters,
1210 	.set_rti	= mptspi_write_rti,
1211 	.show_rti	= 1,
1212 	.get_pcomp_en	= mptspi_read_parameters,
1213 	.set_pcomp_en	= mptspi_write_pcomp_en,
1214 	.show_pcomp_en	= 1,
1215 	.get_hold_mcs	= mptspi_read_parameters,
1216 	.set_hold_mcs	= mptspi_write_hold_mcs,
1217 	.show_hold_mcs	= 1,
1218 	.deny_binding	= mptspi_deny_binding,
1219 };
1220 
1221 /****************************************************************************
1222  * Supported hardware
1223  */
1224 
1225 static struct pci_device_id mptspi_pci_table[] = {
1226 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
1227 		PCI_ANY_ID, PCI_ANY_ID },
1228 	{ PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030,
1229 		PCI_ANY_ID, PCI_ANY_ID },
1230 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035,
1231 		PCI_ANY_ID, PCI_ANY_ID },
1232 	{0}	/* Terminating entry */
1233 };
1234 MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
1235 
1236 
1237 /*
1238  * renegotiate for a given target
1239  */
1240 static void
1241 mptspi_dv_renegotiate_work(struct work_struct *work)
1242 {
1243 	struct work_queue_wrapper *wqw =
1244 		container_of(work, struct work_queue_wrapper, work);
1245 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1246 	struct scsi_device *sdev;
1247 	struct scsi_target *starget;
1248 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1249 	u32 nego;
1250 	MPT_ADAPTER *ioc = hd->ioc;
1251 
1252 	kfree(wqw);
1253 
1254 	if (hd->spi_pending) {
1255 		shost_for_each_device(sdev, ioc->sh) {
1256 			if  (hd->spi_pending & (1 << sdev->id))
1257 				continue;
1258 			starget = scsi_target(sdev);
1259 			nego = mptspi_getRP(starget);
1260 			pg1.RequestedParameters = cpu_to_le32(nego);
1261 			pg1.Reserved = 0;
1262 			pg1.Configuration = 0;
1263 			mptspi_write_spi_device_pg1(starget, &pg1);
1264 		}
1265 	} else {
1266 		shost_for_each_device(sdev, ioc->sh)
1267 			mptspi_dv_device(hd, sdev);
1268 	}
1269 }
1270 
1271 static void
1272 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
1273 {
1274 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1275 
1276 	if (!wqw)
1277 		return;
1278 
1279 	INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work);
1280 	wqw->hd = hd;
1281 
1282 	schedule_work(&wqw->work);
1283 }
1284 
1285 /*
1286  * spi module reset handler
1287  */
1288 static int
1289 mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
1290 {
1291 	int rc;
1292 
1293 	rc = mptscsih_ioc_reset(ioc, reset_phase);
1294 	if ((ioc->bus_type != SPI) || (!rc))
1295 		return rc;
1296 
1297 	/* only try to do a renegotiation if we're properly set up
1298 	 * if we get an ioc fault on bringup, ioc->sh will be NULL */
1299 	if (reset_phase == MPT_IOC_POST_RESET &&
1300 	    ioc->sh) {
1301 		struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1302 
1303 		mptspi_dv_renegotiate(hd);
1304 	}
1305 
1306 	return rc;
1307 }
1308 
1309 #ifdef CONFIG_PM
1310 /*
1311  * spi module resume handler
1312  */
1313 static int
1314 mptspi_resume(struct pci_dev *pdev)
1315 {
1316 	MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev);
1317 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1318 	int rc;
1319 
1320 	rc = mptscsih_resume(pdev);
1321 	mptspi_dv_renegotiate(hd);
1322 
1323 	return rc;
1324 }
1325 #endif
1326 
1327 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1328 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1329 /*
1330  *	mptspi_probe - Installs scsi devices per bus.
1331  *	@pdev: Pointer to pci_dev structure
1332  *
1333  *	Returns 0 for success, non-zero for failure.
1334  *
1335  */
1336 static int
1337 mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1338 {
1339 	struct Scsi_Host	*sh;
1340 	MPT_SCSI_HOST		*hd;
1341 	MPT_ADAPTER 		*ioc;
1342 	unsigned long		 flags;
1343 	int			 ii;
1344 	int			 numSGE = 0;
1345 	int			 scale;
1346 	int			 ioc_cap;
1347 	int			error=0;
1348 	int			r;
1349 
1350 	if ((r = mpt_attach(pdev,id)) != 0)
1351 		return r;
1352 
1353 	ioc = pci_get_drvdata(pdev);
1354 	ioc->DoneCtx = mptspiDoneCtx;
1355 	ioc->TaskCtx = mptspiTaskCtx;
1356 	ioc->InternalCtx = mptspiInternalCtx;
1357 
1358 	/*  Added sanity check on readiness of the MPT adapter.
1359 	 */
1360 	if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
1361 		printk(MYIOC_s_WARN_FMT
1362 		  "Skipping because it's not operational!\n",
1363 		  ioc->name);
1364 		error = -ENODEV;
1365 		goto out_mptspi_probe;
1366 	}
1367 
1368 	if (!ioc->active) {
1369 		printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
1370 		  ioc->name);
1371 		error = -ENODEV;
1372 		goto out_mptspi_probe;
1373 	}
1374 
1375 	/*  Sanity check - ensure at least 1 port is INITIATOR capable
1376 	 */
1377 	ioc_cap = 0;
1378 	for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
1379 		if (ioc->pfacts[ii].ProtocolFlags &
1380 		    MPI_PORTFACTS_PROTOCOL_INITIATOR)
1381 			ioc_cap ++;
1382 	}
1383 
1384 	if (!ioc_cap) {
1385 		printk(MYIOC_s_WARN_FMT
1386 			"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
1387 			ioc->name, ioc);
1388 		return 0;
1389 	}
1390 
1391 	sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));
1392 
1393 	if (!sh) {
1394 		printk(MYIOC_s_WARN_FMT
1395 			"Unable to register controller with SCSI subsystem\n",
1396 			ioc->name);
1397 		error = -1;
1398 		goto out_mptspi_probe;
1399         }
1400 
1401 	spin_lock_irqsave(&ioc->FreeQlock, flags);
1402 
1403 	/* Attach the SCSI Host to the IOC structure
1404 	 */
1405 	ioc->sh = sh;
1406 
1407 	sh->io_port = 0;
1408 	sh->n_io_port = 0;
1409 	sh->irq = 0;
1410 
1411 	/* set 16 byte cdb's */
1412 	sh->max_cmd_len = 16;
1413 
1414 	/* Yikes!  This is important!
1415 	 * Otherwise, by default, linux
1416 	 * only scans target IDs 0-7!
1417 	 * pfactsN->MaxDevices unreliable
1418 	 * (not supported in early
1419 	 *	versions of the FW).
1420 	 * max_id = 1 + actual max id,
1421 	 * max_lun = 1 + actual last lun,
1422 	 *	see hosts.h :o(
1423 	 */
1424 	sh->max_id = ioc->devices_per_bus;
1425 
1426 	sh->max_lun = MPT_LAST_LUN + 1;
1427 	/*
1428 	 * If RAID Firmware Detected, setup virtual channel
1429 	 */
1430 	if (ioc->ir_firmware)
1431 		sh->max_channel = 1;
1432 	else
1433 		sh->max_channel = 0;
1434 	sh->this_id = ioc->pfacts[0].PortSCSIID;
1435 
1436 	/* Required entry.
1437 	 */
1438 	sh->unique_id = ioc->id;
1439 
1440 	/* Verify that we won't exceed the maximum
1441 	 * number of chain buffers
1442 	 * We can optimize:  ZZ = req_sz/sizeof(SGE)
1443 	 * For 32bit SGE's:
1444 	 *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1445 	 *               + (req_sz - 64)/sizeof(SGE)
1446 	 * A slightly different algorithm is required for
1447 	 * 64bit SGEs.
1448 	 */
1449 	scale = ioc->req_sz/ioc->SGE_size;
1450 	if (ioc->sg_addr_size == sizeof(u64)) {
1451 		numSGE = (scale - 1) *
1452 		  (ioc->facts.MaxChainDepth-1) + scale +
1453 		  (ioc->req_sz - 60) / ioc->SGE_size;
1454 	} else {
1455 		numSGE = 1 + (scale - 1) *
1456 		  (ioc->facts.MaxChainDepth-1) + scale +
1457 		  (ioc->req_sz - 64) / ioc->SGE_size;
1458 	}
1459 
1460 	if (numSGE < sh->sg_tablesize) {
1461 		/* Reset this value */
1462 		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1463 		  "Resetting sg_tablesize to %d from %d\n",
1464 		  ioc->name, numSGE, sh->sg_tablesize));
1465 		sh->sg_tablesize = numSGE;
1466 	}
1467 
1468 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1469 
1470 	hd = shost_priv(sh);
1471 	hd->ioc = ioc;
1472 
1473 	/* SCSI needs scsi_cmnd lookup table!
1474 	 * (with size equal to req_depth*PtrSz!)
1475 	 */
1476 	ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC);
1477 	if (!ioc->ScsiLookup) {
1478 		error = -ENOMEM;
1479 		goto out_mptspi_probe;
1480 	}
1481 	spin_lock_init(&ioc->scsi_lookup_lock);
1482 
1483 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
1484 		 ioc->name, ioc->ScsiLookup));
1485 
1486 	ioc->spi_data.Saf_Te = mpt_saf_te;
1487 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1488 		"saf_te %x\n",
1489 		ioc->name,
1490 		mpt_saf_te));
1491 	ioc->spi_data.noQas = 0;
1492 
1493 	hd->last_queue_full = 0;
1494 	hd->spi_pending = 0;
1495 
1496 	/* Some versions of the firmware don't support page 0; without
1497 	 * that we can't get the parameters */
1498 	if (ioc->spi_data.sdp0length != 0)
1499 		sh->transportt = mptspi_transport_template;
1500 
1501 	error = scsi_add_host (sh, &ioc->pcidev->dev);
1502 	if(error) {
1503 		dprintk(ioc, printk(MYIOC_s_ERR_FMT
1504 		  "scsi_add_host failed\n", ioc->name));
1505 		goto out_mptspi_probe;
1506 	}
1507 
1508 	/*
1509 	 * issue internal bus reset
1510 	 */
1511 	if (ioc->spi_data.bus_reset)
1512 		mptscsih_IssueTaskMgmt(hd,
1513 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1514 		    0, 0, 0, 0, 5);
1515 
1516 	scsi_scan_host(sh);
1517 	return 0;
1518 
1519 out_mptspi_probe:
1520 
1521 	mptscsih_remove(pdev);
1522 	return error;
1523 }
1524 
1525 static struct pci_driver mptspi_driver = {
1526 	.name		= "mptspi",
1527 	.id_table	= mptspi_pci_table,
1528 	.probe		= mptspi_probe,
1529 	.remove		= __devexit_p(mptscsih_remove),
1530 	.shutdown	= mptscsih_shutdown,
1531 #ifdef CONFIG_PM
1532 	.suspend	= mptscsih_suspend,
1533 	.resume		= mptspi_resume,
1534 #endif
1535 };
1536 
1537 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1538 /**
1539  *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
1540  *
1541  *	Returns 0 for success, non-zero for failure.
1542  */
1543 static int __init
1544 mptspi_init(void)
1545 {
1546 	int error;
1547 
1548 	show_mptmod_ver(my_NAME, my_VERSION);
1549 
1550 	mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions);
1551 	if (!mptspi_transport_template)
1552 		return -ENODEV;
1553 
1554 	mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER,
1555 	    "mptscsih_io_done");
1556 	mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER,
1557 	    "mptscsih_taskmgmt_complete");
1558 	mptspiInternalCtx = mpt_register(mptscsih_scandv_complete,
1559 	    MPTSPI_DRIVER, "mptscsih_scandv_complete");
1560 
1561 	mpt_event_register(mptspiDoneCtx, mptspi_event_process);
1562 	mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset);
1563 
1564 	error = pci_register_driver(&mptspi_driver);
1565 	if (error)
1566 		spi_release_transport(mptspi_transport_template);
1567 
1568 	return error;
1569 }
1570 
1571 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1573 /**
1574  *	mptspi_exit - Unregisters MPT adapter(s)
1575  */
1576 static void __exit
1577 mptspi_exit(void)
1578 {
1579 	pci_unregister_driver(&mptspi_driver);
1580 
1581 	mpt_reset_deregister(mptspiDoneCtx);
1582 	mpt_event_deregister(mptspiDoneCtx);
1583 
1584 	mpt_deregister(mptspiInternalCtx);
1585 	mpt_deregister(mptspiTaskCtx);
1586 	mpt_deregister(mptspiDoneCtx);
1587 	spi_release_transport(mptspi_transport_template);
1588 }
1589 
1590 module_init(mptspi_init);
1591 module_exit(mptspi_exit);
1592