xref: /openbmc/linux/drivers/message/fusion/mptctl.h (revision d35462b4bb847b68321c55e95c926aa485aecce2)
1 /*
2  *  linux/drivers/message/fusion/mptioctl.h
3  *      Fusion MPT misc device (ioctl) driver.
4  *      For use with PCI chip/adapter(s):
5  *          LSIFC9xx/LSI409xx Fibre Channel
6  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
7  *
8  *  Copyright (c) 1999-2005 LSI Logic Corporation
9  *  (mailto:mpt_linux_developer@lsil.com)
10  *
11  */
12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13 /*
14     This program is free software; you can redistribute it and/or modify
15     it under the terms of the GNU General Public License as published by
16     the Free Software Foundation; version 2 of the License.
17 
18     This program is distributed in the hope that it will be useful,
19     but WITHOUT ANY WARRANTY; without even the implied warranty of
20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21     GNU General Public License for more details.
22 
23     NO WARRANTY
24     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28     solely responsible for determining the appropriateness of using and
29     distributing the Program and assumes all risks associated with its
30     exercise of rights under this Agreement, including but not limited to
31     the risks and costs of program errors, damage to or loss of data,
32     programs or equipment, and unavailability or interruption of operations.
33 
34     DISCLAIMER OF LIABILITY
35     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42 
43     You should have received a copy of the GNU General Public License
44     along with this program; if not, write to the Free Software
45     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
46 */
47 
48 #ifndef MPTCTL_H_INCLUDED
49 #define MPTCTL_H_INCLUDED
50 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
51 
52 
53 
54 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
55 /*
56  *
57  */
58 #define MPT_MISCDEV_BASENAME            "mptctl"
59 #define MPT_MISCDEV_PATHNAME            "/dev/" MPT_MISCDEV_BASENAME
60 
61 #define MPT_PRODUCT_LENGTH              12
62 
63 /*
64  *  Generic MPT Control IOCTLs and structures
65  */
66 #define MPT_MAGIC_NUMBER	'm'
67 
68 #define MPTRWPERF		_IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w)
69 
70 #define MPTFWDOWNLOAD		_IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer)
71 #define MPTCOMMAND		_IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command)
72 
73 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
74 #define MPTFWDOWNLOAD32		_IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32)
75 #define MPTCOMMAND32		_IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32)
76 #endif
77 
78 #define MPTIOCINFO		_IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo)
79 #define MPTIOCINFO1		_IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0)
80 #define MPTIOCINFO2		_IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1)
81 #define MPTTARGETINFO		_IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo)
82 #define MPTTEST			_IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test)
83 #define MPTEVENTQUERY		_IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery)
84 #define MPTEVENTENABLE		_IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable)
85 #define MPTEVENTREPORT		_IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport)
86 #define MPTHARDRESET		_IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset)
87 #define MPTFWREPLACE		_IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw)
88 
89 /*
90  * SPARC PLATFORM REMARKS:
91  * IOCTL data structures that contain pointers
92  * will have different sizes in the driver and applications
93  * (as the app. will not use 8-byte pointers).
94  * Apps should use MPTFWDOWNLOAD and MPTCOMMAND.
95  * The driver will convert data from
96  * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command)
97  * internally.
98  *
99  * If data structures change size, must handle as in IOCGETINFO.
100  */
101 struct mpt_fw_xfer {
102 	unsigned int	 iocnum;	/* IOC unit number */
103 	unsigned int	 fwlen;
104 	void		__user *bufp;	/* Pointer to firmware buffer */
105 };
106 
107 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
108 struct mpt_fw_xfer32 {
109 	unsigned int iocnum;
110 	unsigned int fwlen;
111 	u32 bufp;
112 };
113 #endif	/*}*/
114 
115 /*
116  *  IOCTL header structure.
117  *  iocnum - must be defined.
118  *  port - must be defined for all IOCTL commands other than MPTIOCINFO
119  *  maxDataSize - ignored on MPTCOMMAND commands
120  *		- ignored on MPTFWREPLACE commands
121  *		- on query commands, reports the maximum number of bytes to be returned
122  *		  to the host driver (count includes the header).
123  *		  That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands.
124  *		  Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable
125  *			sized commands. (MPTTARGETINFO, MPTEVENTREPORT)
126  */
127 typedef struct _mpt_ioctl_header {
128 	unsigned int	 iocnum;	/* IOC unit number */
129 	unsigned int	 port;		/* IOC port number */
130 	int		 maxDataSize;	/* Maximum Num. bytes to transfer on read */
131 } mpt_ioctl_header;
132 
133 /*
134  * Issue a diagnostic reset
135  */
136 struct mpt_ioctl_diag_reset {
137 	mpt_ioctl_header hdr;
138 };
139 
140 
141 /*
142  *  PCI bus/device/function information structure.
143  */
144 struct mpt_ioctl_pci_info {
145 	union {
146 		struct {
147 			unsigned int  deviceNumber   :  5;
148 			unsigned int  functionNumber :  3;
149 			unsigned int  busNumber      : 24;
150 		} bits;
151 		unsigned int  asUlong;
152 	} u;
153 };
154 
155 struct mpt_ioctl_pci_info2 {
156 	union {
157 		struct {
158 			unsigned int  deviceNumber   :  5;
159 			unsigned int  functionNumber :  3;
160 			unsigned int  busNumber      : 24;
161 		} bits;
162 		unsigned int  asUlong;
163 	} u;
164   int segmentID;
165 };
166 
167 /*
168  *  Adapter Information Page
169  *  Read only.
170  *  Data starts at offset 0xC
171  */
172 #define MPT_IOCTL_INTERFACE_SCSI	(0x00)
173 #define MPT_IOCTL_INTERFACE_FC		(0x01)
174 #define MPT_IOCTL_INTERFACE_FC_IP	(0x02)
175 #define MPT_IOCTL_INTERFACE_SAS		(0x03)
176 #define MPT_IOCTL_VERSION_LENGTH	(32)
177 
178 struct mpt_ioctl_iocinfo {
179 	mpt_ioctl_header hdr;
180 	int		 adapterType;	/* SCSI or FCP */
181 	int		 port;		/* port number */
182 	int		 pciId;		/* PCI Id. */
183 	int		 hwRev;		/* hardware revision */
184 	int		 subSystemDevice;	/* PCI subsystem Device ID */
185 	int		 subSystemVendor;	/* PCI subsystem Vendor ID */
186 	int		 numDevices;		/* number of devices */
187 	int		 FWVersion;		/* FW Version (integer) */
188 	int		 BIOSVersion;		/* BIOS Version (integer) */
189 	char		 driverVersion[MPT_IOCTL_VERSION_LENGTH];	/* Driver Version (string) */
190 	char		 busChangeEvent;
191 	char		 hostId;
192 	char		 rsvd[2];
193 	struct mpt_ioctl_pci_info2  pciInfo; /* Added Rev 2 */
194 };
195 
196 struct mpt_ioctl_iocinfo_rev1 {
197 	mpt_ioctl_header hdr;
198 	int		 adapterType;	/* SCSI or FCP */
199 	int		 port;		/* port number */
200 	int		 pciId;		/* PCI Id. */
201 	int		 hwRev;		/* hardware revision */
202 	int		 subSystemDevice;	/* PCI subsystem Device ID */
203 	int		 subSystemVendor;	/* PCI subsystem Vendor ID */
204 	int		 numDevices;		/* number of devices */
205 	int		 FWVersion;		/* FW Version (integer) */
206 	int		 BIOSVersion;		/* BIOS Version (integer) */
207 	char		 driverVersion[MPT_IOCTL_VERSION_LENGTH];	/* Driver Version (string) */
208 	char		 busChangeEvent;
209 	char		 hostId;
210 	char		 rsvd[2];
211 	struct mpt_ioctl_pci_info  pciInfo; /* Added Rev 1 */
212 };
213 
214 /* Original structure, must always accept these
215  * IOCTLs. 4 byte pads can occur based on arch with
216  * above structure. Wish to re-align, but cannot.
217  */
218 struct mpt_ioctl_iocinfo_rev0 {
219 	mpt_ioctl_header hdr;
220 	int		 adapterType;	/* SCSI or FCP */
221 	int		 port;		/* port number */
222 	int		 pciId;		/* PCI Id. */
223 	int		 hwRev;		/* hardware revision */
224 	int		 subSystemDevice;	/* PCI subsystem Device ID */
225 	int		 subSystemVendor;	/* PCI subsystem Vendor ID */
226 	int		 numDevices;		/* number of devices */
227 	int		 FWVersion;		/* FW Version (integer) */
228 	int		 BIOSVersion;		/* BIOS Version (integer) */
229 	char		 driverVersion[MPT_IOCTL_VERSION_LENGTH];	/* Driver Version (string) */
230 	char		 busChangeEvent;
231 	char		 hostId;
232 	char		 rsvd[2];
233 };
234 
235 /*
236  * Device Information Page
237  * Report the number of, and ids of, all targets
238  * on this IOC.  The ids array is a packed structure
239  * of the known targetInfo.
240  * bits 31-24: reserved
241  *      23-16: LUN
242  *      15- 8: Bus Number
243  *       7- 0: Target ID
244  */
245 struct mpt_ioctl_targetinfo {
246 	mpt_ioctl_header hdr;
247 	int		 numDevices;	/* Num targets on this ioc */
248 	int		 targetInfo[1];
249 };
250 
251 
252 /*
253  * Event reporting IOCTL's.  These IOCTL's will
254  * use the following defines:
255  */
256 struct mpt_ioctl_eventquery {
257 	mpt_ioctl_header hdr;
258 	unsigned short	 eventEntries;
259 	unsigned short	 reserved;
260 	unsigned int	 eventTypes;
261 };
262 
263 struct mpt_ioctl_eventenable {
264 	mpt_ioctl_header hdr;
265 	unsigned int	 eventTypes;
266 };
267 
268 #ifndef __KERNEL__
269 typedef struct {
270 	uint	event;
271 	uint	eventContext;
272 	uint	data[2];
273 } MPT_IOCTL_EVENTS;
274 #endif
275 
276 struct mpt_ioctl_eventreport {
277 	mpt_ioctl_header	hdr;
278 	MPT_IOCTL_EVENTS	eventData[1];
279 };
280 
281 #define MPT_MAX_NAME	32
282 struct mpt_ioctl_test {
283 	mpt_ioctl_header hdr;
284 	u8		 name[MPT_MAX_NAME];
285 	int		 chip_type;
286 	u8		 product [MPT_PRODUCT_LENGTH];
287 };
288 
289 /* Replace the FW image cached in host driver memory
290  * newImageSize - image size in bytes
291  * newImage - first byte of the new image
292  */
293 typedef struct mpt_ioctl_replace_fw {
294 	mpt_ioctl_header hdr;
295 	int		 newImageSize;
296 	u8		 newImage[1];
297 } mpt_ioctl_replace_fw_t;
298 
299 /* General MPT Pass through data strucutre
300  *
301  * iocnum
302  * timeout - in seconds, command timeout. If 0, set by driver to
303  *		default value.
304  * replyFrameBufPtr - reply location
305  * dataInBufPtr - destination for read
306  * dataOutBufPtr - data source for write
307  * senseDataPtr - sense data location
308  * maxReplyBytes - maximum number of reply bytes to be sent to app.
309  * dataInSize - num bytes for data transfer in (read)
310  * dataOutSize - num bytes for data transfer out (write)
311  * dataSgeOffset - offset in words from the start of the request message
312  *		to the first SGL
313  * MF[1];
314  *
315  * Remark:  Some config pages have bi-directional transfer,
316  * both a read and a write. The basic structure allows for
317  * a bidirectional set up. Normal messages will have one or
318  * both of these buffers NULL.
319  */
320 struct mpt_ioctl_command {
321 	mpt_ioctl_header hdr;
322 	int		timeout;	/* optional (seconds) */
323 	char		__user *replyFrameBufPtr;
324 	char		__user *dataInBufPtr;
325 	char		__user *dataOutBufPtr;
326 	char		__user *senseDataPtr;
327 	int		maxReplyBytes;
328 	int		dataInSize;
329 	int		dataOutSize;
330 	int		maxSenseBytes;
331 	int		dataSgeOffset;
332 	char		MF[1];
333 };
334 
335 /*
336  * SPARC PLATFORM: See earlier remark.
337  */
338 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
339 struct mpt_ioctl_command32 {
340 	mpt_ioctl_header hdr;
341 	int	timeout;
342 	u32	replyFrameBufPtr;
343 	u32	dataInBufPtr;
344 	u32	dataOutBufPtr;
345 	u32	senseDataPtr;
346 	int	maxReplyBytes;
347 	int	dataInSize;
348 	int	dataOutSize;
349 	int	maxSenseBytes;
350 	int	dataSgeOffset;
351 	char	MF[1];
352 };
353 #endif	/*}*/
354 
355 
356 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
357 /*
358  *	HP Specific IOCTL Defines and Structures
359  */
360 
361 #define CPQFCTS_IOC_MAGIC 'Z'
362 #define HP_IOC_MAGIC 'Z'
363 #define HP_GETHOSTINFO		_IOR(HP_IOC_MAGIC, 20, hp_host_info_t)
364 #define HP_GETHOSTINFO1		_IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t)
365 #define HP_GETTARGETINFO	_IOR(HP_IOC_MAGIC, 21, hp_target_info_t)
366 
367 /* All HP IOCTLs must include this header
368  */
369 typedef struct _hp_header {
370 	unsigned int iocnum;
371 	unsigned int host;
372 	unsigned int channel;
373 	unsigned int id;
374 	unsigned int lun;
375 } hp_header_t;
376 
377 /*
378  *  Header:
379  *  iocnum 	required (input)
380  *  host 	ignored
381  *  channe	ignored
382  *  id		ignored
383  *  lun		ignored
384  */
385 typedef struct _hp_host_info {
386 	hp_header_t	 hdr;
387 	u16		 vendor;
388 	u16		 device;
389 	u16		 subsystem_vendor;
390 	u16		 subsystem_id;
391 	u8		 devfn;
392 	u8		 bus;
393 	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
394 	u8		 fw_version[16];	/* string */
395 	u8		 serial_number[24];	/* string */
396 	u32		 ioc_status;
397 	u32		 bus_phys_width;
398 	u32		 base_io_addr;
399 	u32		 rsvd;
400 	unsigned int	 hard_resets;		/* driver initiated resets */
401 	unsigned int	 soft_resets;		/* ioc, external resets */
402 	unsigned int	 timeouts;		/* num timeouts */
403 } hp_host_info_t;
404 
405 /* replace ulongs with uints, need to preserve backwards
406  * compatibility.
407  */
408 typedef struct _hp_host_info_rev0 {
409 	hp_header_t	 hdr;
410 	u16		 vendor;
411 	u16		 device;
412 	u16		 subsystem_vendor;
413 	u16		 subsystem_id;
414 	u8		 devfn;
415 	u8		 bus;
416 	ushort		 host_no;		/* SCSI Host number, if scsi driver not loaded*/
417 	u8		 fw_version[16];	/* string */
418 	u8		 serial_number[24];	/* string */
419 	u32		 ioc_status;
420 	u32		 bus_phys_width;
421 	u32		 base_io_addr;
422 	u32		 rsvd;
423 	unsigned long	 hard_resets;		/* driver initiated resets */
424 	unsigned long	 soft_resets;		/* ioc, external resets */
425 	unsigned long	 timeouts;		/* num timeouts */
426 } hp_host_info_rev0_t;
427 
428 /*
429  *  Header:
430  *  iocnum 	required (input)
431  *  host 	required
432  *  channel	required	(bus number)
433  *  id		required
434  *  lun		ignored
435  *
436  *  All error values between 0 and 0xFFFF in size.
437  */
438 typedef struct _hp_target_info {
439 	hp_header_t	 hdr;
440 	u32 parity_errors;
441 	u32 phase_errors;
442 	u32 select_timeouts;
443 	u32 message_rejects;
444 	u32 negotiated_speed;
445 	u8  negotiated_width;
446 	u8  rsvd[7];				/* 8 byte alignment */
447 } hp_target_info_t;
448 
449 #define HP_STATUS_OTHER		1
450 #define HP_STATUS_OK		2
451 #define HP_STATUS_FAILED	3
452 
453 #define HP_BUS_WIDTH_UNK	1
454 #define HP_BUS_WIDTH_8		2
455 #define HP_BUS_WIDTH_16		3
456 #define HP_BUS_WIDTH_32		4
457 
458 #define HP_DEV_SPEED_ASYNC	2
459 #define HP_DEV_SPEED_FAST	3
460 #define HP_DEV_SPEED_ULTRA	4
461 #define HP_DEV_SPEED_ULTRA2	5
462 #define HP_DEV_SPEED_ULTRA160	6
463 #define HP_DEV_SPEED_SCSI1	7
464 #define HP_DEV_SPEED_ULTRA320	8
465 
466 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
467 
468 
469 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
470 
471 #endif
472 
473