1 /* 2 * max1619.c - Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> 5 * Jean Delvare <khali@linux-fr.org> 6 * 7 * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. 8 * It reports up to two temperatures (its own plus up to 9 * one external one). Complete datasheet can be 10 * obtained from Maxim's website at: 11 * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 29 #include <linux/module.h> 30 #include <linux/init.h> 31 #include <linux/slab.h> 32 #include <linux/jiffies.h> 33 #include <linux/i2c.h> 34 #include <linux/hwmon.h> 35 #include <linux/hwmon-sysfs.h> 36 #include <linux/err.h> 37 #include <linux/mutex.h> 38 #include <linux/sysfs.h> 39 40 static const unsigned short normal_i2c[] = { 41 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; 42 43 /* 44 * Insmod parameters 45 */ 46 47 I2C_CLIENT_INSMOD_1(max1619); 48 49 /* 50 * The MAX1619 registers 51 */ 52 53 #define MAX1619_REG_R_MAN_ID 0xFE 54 #define MAX1619_REG_R_CHIP_ID 0xFF 55 #define MAX1619_REG_R_CONFIG 0x03 56 #define MAX1619_REG_W_CONFIG 0x09 57 #define MAX1619_REG_R_CONVRATE 0x04 58 #define MAX1619_REG_W_CONVRATE 0x0A 59 #define MAX1619_REG_R_STATUS 0x02 60 #define MAX1619_REG_R_LOCAL_TEMP 0x00 61 #define MAX1619_REG_R_REMOTE_TEMP 0x01 62 #define MAX1619_REG_R_REMOTE_HIGH 0x07 63 #define MAX1619_REG_W_REMOTE_HIGH 0x0D 64 #define MAX1619_REG_R_REMOTE_LOW 0x08 65 #define MAX1619_REG_W_REMOTE_LOW 0x0E 66 #define MAX1619_REG_R_REMOTE_CRIT 0x10 67 #define MAX1619_REG_W_REMOTE_CRIT 0x12 68 #define MAX1619_REG_R_TCRIT_HYST 0x11 69 #define MAX1619_REG_W_TCRIT_HYST 0x13 70 71 /* 72 * Conversions 73 */ 74 75 static int temp_from_reg(int val) 76 { 77 return (val & 0x80 ? val-0x100 : val) * 1000; 78 } 79 80 static int temp_to_reg(int val) 81 { 82 return (val < 0 ? val+0x100*1000 : val) / 1000; 83 } 84 85 /* 86 * Functions declaration 87 */ 88 89 static int max1619_probe(struct i2c_client *client, 90 const struct i2c_device_id *id); 91 static int max1619_detect(struct i2c_client *client, 92 struct i2c_board_info *info); 93 static void max1619_init_client(struct i2c_client *client); 94 static int max1619_remove(struct i2c_client *client); 95 static struct max1619_data *max1619_update_device(struct device *dev); 96 97 /* 98 * Driver data (common to all clients) 99 */ 100 101 static const struct i2c_device_id max1619_id[] = { 102 { "max1619", max1619 }, 103 { } 104 }; 105 MODULE_DEVICE_TABLE(i2c, max1619_id); 106 107 static struct i2c_driver max1619_driver = { 108 .class = I2C_CLASS_HWMON, 109 .driver = { 110 .name = "max1619", 111 }, 112 .probe = max1619_probe, 113 .remove = max1619_remove, 114 .id_table = max1619_id, 115 .detect = max1619_detect, 116 .address_list = normal_i2c, 117 }; 118 119 /* 120 * Client data (each client gets its own) 121 */ 122 123 struct max1619_data { 124 struct device *hwmon_dev; 125 struct mutex update_lock; 126 char valid; /* zero until following fields are valid */ 127 unsigned long last_updated; /* in jiffies */ 128 129 /* registers values */ 130 u8 temp_input1; /* local */ 131 u8 temp_input2, temp_low2, temp_high2; /* remote */ 132 u8 temp_crit2; 133 u8 temp_hyst2; 134 u8 alarms; 135 }; 136 137 /* 138 * Sysfs stuff 139 */ 140 141 #define show_temp(value) \ 142 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ 143 { \ 144 struct max1619_data *data = max1619_update_device(dev); \ 145 return sprintf(buf, "%d\n", temp_from_reg(data->value)); \ 146 } 147 show_temp(temp_input1); 148 show_temp(temp_input2); 149 show_temp(temp_low2); 150 show_temp(temp_high2); 151 show_temp(temp_crit2); 152 show_temp(temp_hyst2); 153 154 #define set_temp2(value, reg) \ 155 static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ 156 size_t count) \ 157 { \ 158 struct i2c_client *client = to_i2c_client(dev); \ 159 struct max1619_data *data = i2c_get_clientdata(client); \ 160 long val = simple_strtol(buf, NULL, 10); \ 161 \ 162 mutex_lock(&data->update_lock); \ 163 data->value = temp_to_reg(val); \ 164 i2c_smbus_write_byte_data(client, reg, data->value); \ 165 mutex_unlock(&data->update_lock); \ 166 return count; \ 167 } 168 169 set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); 170 set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); 171 set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); 172 set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); 173 174 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) 175 { 176 struct max1619_data *data = max1619_update_device(dev); 177 return sprintf(buf, "%d\n", data->alarms); 178 } 179 180 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, 181 char *buf) 182 { 183 int bitnr = to_sensor_dev_attr(attr)->index; 184 struct max1619_data *data = max1619_update_device(dev); 185 return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); 186 } 187 188 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); 189 static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); 190 static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, 191 set_temp_low2); 192 static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, 193 set_temp_high2); 194 static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, 195 set_temp_crit2); 196 static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, 197 set_temp_hyst2); 198 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 199 static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); 200 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); 201 static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); 202 static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); 203 204 static struct attribute *max1619_attributes[] = { 205 &dev_attr_temp1_input.attr, 206 &dev_attr_temp2_input.attr, 207 &dev_attr_temp2_min.attr, 208 &dev_attr_temp2_max.attr, 209 &dev_attr_temp2_crit.attr, 210 &dev_attr_temp2_crit_hyst.attr, 211 212 &dev_attr_alarms.attr, 213 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, 214 &sensor_dev_attr_temp2_fault.dev_attr.attr, 215 &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, 216 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, 217 NULL 218 }; 219 220 static const struct attribute_group max1619_group = { 221 .attrs = max1619_attributes, 222 }; 223 224 /* 225 * Real code 226 */ 227 228 /* Return 0 if detection is successful, -ENODEV otherwise */ 229 static int max1619_detect(struct i2c_client *client, 230 struct i2c_board_info *info) 231 { 232 struct i2c_adapter *adapter = client->adapter; 233 u8 reg_config, reg_convrate, reg_status, man_id, chip_id; 234 235 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 236 return -ENODEV; 237 238 /* detection */ 239 reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); 240 reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE); 241 reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS); 242 if ((reg_config & 0x03) != 0x00 243 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) { 244 dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n", 245 client->addr); 246 return -ENODEV; 247 } 248 249 /* identification */ 250 man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID); 251 chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID); 252 if (man_id != 0x4D || chip_id != 0x04) { 253 dev_info(&adapter->dev, 254 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n", 255 man_id, chip_id); 256 return -ENODEV; 257 } 258 259 strlcpy(info->type, "max1619", I2C_NAME_SIZE); 260 261 return 0; 262 } 263 264 static int max1619_probe(struct i2c_client *new_client, 265 const struct i2c_device_id *id) 266 { 267 struct max1619_data *data; 268 int err; 269 270 data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL); 271 if (!data) { 272 err = -ENOMEM; 273 goto exit; 274 } 275 276 i2c_set_clientdata(new_client, data); 277 data->valid = 0; 278 mutex_init(&data->update_lock); 279 280 /* Initialize the MAX1619 chip */ 281 max1619_init_client(new_client); 282 283 /* Register sysfs hooks */ 284 if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group))) 285 goto exit_free; 286 287 data->hwmon_dev = hwmon_device_register(&new_client->dev); 288 if (IS_ERR(data->hwmon_dev)) { 289 err = PTR_ERR(data->hwmon_dev); 290 goto exit_remove_files; 291 } 292 293 return 0; 294 295 exit_remove_files: 296 sysfs_remove_group(&new_client->dev.kobj, &max1619_group); 297 exit_free: 298 kfree(data); 299 exit: 300 return err; 301 } 302 303 static void max1619_init_client(struct i2c_client *client) 304 { 305 u8 config; 306 307 /* 308 * Start the conversions. 309 */ 310 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, 311 5); /* 2 Hz */ 312 config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); 313 if (config & 0x40) 314 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, 315 config & 0xBF); /* run */ 316 } 317 318 static int max1619_remove(struct i2c_client *client) 319 { 320 struct max1619_data *data = i2c_get_clientdata(client); 321 322 hwmon_device_unregister(data->hwmon_dev); 323 sysfs_remove_group(&client->dev.kobj, &max1619_group); 324 325 kfree(data); 326 return 0; 327 } 328 329 static struct max1619_data *max1619_update_device(struct device *dev) 330 { 331 struct i2c_client *client = to_i2c_client(dev); 332 struct max1619_data *data = i2c_get_clientdata(client); 333 334 mutex_lock(&data->update_lock); 335 336 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { 337 dev_dbg(&client->dev, "Updating max1619 data.\n"); 338 data->temp_input1 = i2c_smbus_read_byte_data(client, 339 MAX1619_REG_R_LOCAL_TEMP); 340 data->temp_input2 = i2c_smbus_read_byte_data(client, 341 MAX1619_REG_R_REMOTE_TEMP); 342 data->temp_high2 = i2c_smbus_read_byte_data(client, 343 MAX1619_REG_R_REMOTE_HIGH); 344 data->temp_low2 = i2c_smbus_read_byte_data(client, 345 MAX1619_REG_R_REMOTE_LOW); 346 data->temp_crit2 = i2c_smbus_read_byte_data(client, 347 MAX1619_REG_R_REMOTE_CRIT); 348 data->temp_hyst2 = i2c_smbus_read_byte_data(client, 349 MAX1619_REG_R_TCRIT_HYST); 350 data->alarms = i2c_smbus_read_byte_data(client, 351 MAX1619_REG_R_STATUS); 352 353 data->last_updated = jiffies; 354 data->valid = 1; 355 } 356 357 mutex_unlock(&data->update_lock); 358 359 return data; 360 } 361 362 static int __init sensors_max1619_init(void) 363 { 364 return i2c_add_driver(&max1619_driver); 365 } 366 367 static void __exit sensors_max1619_exit(void) 368 { 369 i2c_del_driver(&max1619_driver); 370 } 371 372 MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and " 373 "Jean Delvare <khali@linux-fr.org>"); 374 MODULE_DESCRIPTION("MAX1619 sensor driver"); 375 MODULE_LICENSE("GPL"); 376 377 module_init(sensors_max1619_init); 378 module_exit(sensors_max1619_exit); 379