1 /* 2 * Driver for Linear Technology LTC4261 I2C Negative Voltage Hot Swap Controller 3 * 4 * Copyright (C) 2010 Ericsson AB. 5 * 6 * Derived from: 7 * 8 * Driver for Linear Technology LTC4245 I2C Multiple Supply Hot Swap Controller 9 * Copyright (C) 2008 Ira W. Snyder <iws@ovro.caltech.edu> 10 * 11 * Datasheet: http://cds.linear.com/docs/Datasheet/42612fb.pdf 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 #include <linux/kernel.h> 29 #include <linux/module.h> 30 #include <linux/init.h> 31 #include <linux/err.h> 32 #include <linux/slab.h> 33 #include <linux/i2c.h> 34 #include <linux/hwmon.h> 35 #include <linux/hwmon-sysfs.h> 36 37 /* chip registers */ 38 #define LTC4261_STATUS 0x00 /* readonly */ 39 #define LTC4261_FAULT 0x01 40 #define LTC4261_ALERT 0x02 41 #define LTC4261_CONTROL 0x03 42 #define LTC4261_SENSE_H 0x04 43 #define LTC4261_SENSE_L 0x05 44 #define LTC4261_ADIN2_H 0x06 45 #define LTC4261_ADIN2_L 0x07 46 #define LTC4261_ADIN_H 0x08 47 #define LTC4261_ADIN_L 0x09 48 49 /* 50 * Fault register bits 51 */ 52 #define FAULT_OV (1<<0) 53 #define FAULT_UV (1<<1) 54 #define FAULT_OC (1<<2) 55 56 struct ltc4261_data { 57 struct device *hwmon_dev; 58 59 struct mutex update_lock; 60 bool valid; 61 unsigned long last_updated; /* in jiffies */ 62 63 /* Registers */ 64 u8 regs[10]; 65 }; 66 67 static struct ltc4261_data *ltc4261_update_device(struct device *dev) 68 { 69 struct i2c_client *client = to_i2c_client(dev); 70 struct ltc4261_data *data = i2c_get_clientdata(client); 71 struct ltc4261_data *ret = data; 72 73 mutex_lock(&data->update_lock); 74 75 if (time_after(jiffies, data->last_updated + HZ / 4) || !data->valid) { 76 int i; 77 78 /* Read registers -- 0x00 to 0x09 */ 79 for (i = 0; i < ARRAY_SIZE(data->regs); i++) { 80 int val; 81 82 val = i2c_smbus_read_byte_data(client, i); 83 if (unlikely(val < 0)) { 84 dev_dbg(dev, 85 "Failed to read ADC value: error %d\n", 86 val); 87 ret = ERR_PTR(val); 88 data->valid = 0; 89 goto abort; 90 } 91 data->regs[i] = val; 92 } 93 data->last_updated = jiffies; 94 data->valid = 1; 95 } 96 abort: 97 mutex_unlock(&data->update_lock); 98 return ret; 99 } 100 101 /* Return the voltage from the given register in mV or mA */ 102 static int ltc4261_get_value(struct ltc4261_data *data, u8 reg) 103 { 104 u32 val; 105 106 val = (data->regs[reg] << 2) + (data->regs[reg + 1] >> 6); 107 108 switch (reg) { 109 case LTC4261_ADIN_H: 110 case LTC4261_ADIN2_H: 111 /* 2.5mV resolution. Convert to mV. */ 112 val = val * 25 / 10; 113 break; 114 case LTC4261_SENSE_H: 115 /* 116 * 62.5uV resolution. Convert to current as measured with 117 * an 1 mOhm sense resistor, in mA. If a different sense 118 * resistor is installed, calculate the actual current by 119 * dividing the reported current by the sense resistor value 120 * in mOhm. 121 */ 122 val = val * 625 / 10; 123 break; 124 default: 125 /* If we get here, the developer messed up */ 126 WARN_ON_ONCE(1); 127 val = 0; 128 break; 129 } 130 131 return val; 132 } 133 134 static ssize_t ltc4261_show_value(struct device *dev, 135 struct device_attribute *da, char *buf) 136 { 137 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 138 struct ltc4261_data *data = ltc4261_update_device(dev); 139 int value; 140 141 if (IS_ERR(data)) 142 return PTR_ERR(data); 143 144 value = ltc4261_get_value(data, attr->index); 145 return snprintf(buf, PAGE_SIZE, "%d\n", value); 146 } 147 148 static ssize_t ltc4261_show_bool(struct device *dev, 149 struct device_attribute *da, char *buf) 150 { 151 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 152 struct i2c_client *client = to_i2c_client(dev); 153 struct ltc4261_data *data = ltc4261_update_device(dev); 154 u8 fault; 155 156 if (IS_ERR(data)) 157 return PTR_ERR(data); 158 159 fault = data->regs[LTC4261_FAULT] & attr->index; 160 if (fault) /* Clear reported faults in chip register */ 161 i2c_smbus_write_byte_data(client, LTC4261_FAULT, ~fault); 162 163 return snprintf(buf, PAGE_SIZE, "%d\n", fault ? 1 : 0); 164 } 165 166 /* 167 * These macros are used below in constructing device attribute objects 168 * for use with sysfs_create_group() to make a sysfs device file 169 * for each register. 170 */ 171 172 #define LTC4261_VALUE(name, ltc4261_cmd_idx) \ 173 static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ 174 ltc4261_show_value, NULL, ltc4261_cmd_idx) 175 176 #define LTC4261_BOOL(name, mask) \ 177 static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ 178 ltc4261_show_bool, NULL, (mask)) 179 180 /* 181 * Input voltages. 182 */ 183 LTC4261_VALUE(in1_input, LTC4261_ADIN_H); 184 LTC4261_VALUE(in2_input, LTC4261_ADIN2_H); 185 186 /* 187 * Voltage alarms. The chip has only one set of voltage alarm status bits, 188 * triggered by input voltage alarms. In many designs, those alarms are 189 * associated with the ADIN2 sensor, due to the proximity of the ADIN2 pin 190 * to the OV pin. ADIN2 is, however, not available on all chip variants. 191 * To ensure that the alarm condition is reported to the user, report it 192 * with both voltage sensors. 193 */ 194 LTC4261_BOOL(in1_min_alarm, FAULT_UV); 195 LTC4261_BOOL(in1_max_alarm, FAULT_OV); 196 LTC4261_BOOL(in2_min_alarm, FAULT_UV); 197 LTC4261_BOOL(in2_max_alarm, FAULT_OV); 198 199 /* Currents (via sense resistor) */ 200 LTC4261_VALUE(curr1_input, LTC4261_SENSE_H); 201 202 /* Overcurrent alarm */ 203 LTC4261_BOOL(curr1_max_alarm, FAULT_OC); 204 205 static struct attribute *ltc4261_attributes[] = { 206 &sensor_dev_attr_in1_input.dev_attr.attr, 207 &sensor_dev_attr_in1_min_alarm.dev_attr.attr, 208 &sensor_dev_attr_in1_max_alarm.dev_attr.attr, 209 &sensor_dev_attr_in2_input.dev_attr.attr, 210 &sensor_dev_attr_in2_min_alarm.dev_attr.attr, 211 &sensor_dev_attr_in2_max_alarm.dev_attr.attr, 212 213 &sensor_dev_attr_curr1_input.dev_attr.attr, 214 &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, 215 216 NULL, 217 }; 218 219 static const struct attribute_group ltc4261_group = { 220 .attrs = ltc4261_attributes, 221 }; 222 223 static int ltc4261_probe(struct i2c_client *client, 224 const struct i2c_device_id *id) 225 { 226 struct i2c_adapter *adapter = client->adapter; 227 struct ltc4261_data *data; 228 int ret; 229 230 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 231 return -ENODEV; 232 233 if (i2c_smbus_read_byte_data(client, LTC4261_STATUS) < 0) { 234 dev_err(&client->dev, "Failed to read status register\n"); 235 return -ENODEV; 236 } 237 238 data = kzalloc(sizeof(*data), GFP_KERNEL); 239 if (!data) { 240 ret = -ENOMEM; 241 goto out_kzalloc; 242 } 243 244 i2c_set_clientdata(client, data); 245 mutex_init(&data->update_lock); 246 247 /* Clear faults */ 248 i2c_smbus_write_byte_data(client, LTC4261_FAULT, 0x00); 249 250 /* Register sysfs hooks */ 251 ret = sysfs_create_group(&client->dev.kobj, <c4261_group); 252 if (ret) 253 goto out_sysfs_create_group; 254 255 data->hwmon_dev = hwmon_device_register(&client->dev); 256 if (IS_ERR(data->hwmon_dev)) { 257 ret = PTR_ERR(data->hwmon_dev); 258 goto out_hwmon_device_register; 259 } 260 261 return 0; 262 263 out_hwmon_device_register: 264 sysfs_remove_group(&client->dev.kobj, <c4261_group); 265 out_sysfs_create_group: 266 kfree(data); 267 out_kzalloc: 268 return ret; 269 } 270 271 static int ltc4261_remove(struct i2c_client *client) 272 { 273 struct ltc4261_data *data = i2c_get_clientdata(client); 274 275 hwmon_device_unregister(data->hwmon_dev); 276 sysfs_remove_group(&client->dev.kobj, <c4261_group); 277 278 kfree(data); 279 280 return 0; 281 } 282 283 static const struct i2c_device_id ltc4261_id[] = { 284 {"ltc4261", 0}, 285 {} 286 }; 287 288 MODULE_DEVICE_TABLE(i2c, ltc4261_id); 289 290 /* This is the driver that will be inserted */ 291 static struct i2c_driver ltc4261_driver = { 292 .driver = { 293 .name = "ltc4261", 294 }, 295 .probe = ltc4261_probe, 296 .remove = ltc4261_remove, 297 .id_table = ltc4261_id, 298 }; 299 300 static int __init ltc4261_init(void) 301 { 302 return i2c_add_driver(<c4261_driver); 303 } 304 305 static void __exit ltc4261_exit(void) 306 { 307 i2c_del_driver(<c4261_driver); 308 } 309 310 MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); 311 MODULE_DESCRIPTION("LTC4261 driver"); 312 MODULE_LICENSE("GPL"); 313 314 module_init(ltc4261_init); 315 module_exit(ltc4261_exit); 316