xref: /openbmc/linux/drivers/edac/amd8131_edac.c (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)

// SPDX-License-Identifier: GPL-2.0-only
/*
 * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module
 *
 * Copyright (c) 2008 Wind River Systems, Inc.
 *
 * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
 * 		Benjamin Walsh <benjamin.walsh@windriver.com>
 * 		Hu Yongqi <yongqi.hu@windriver.com>
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/edac.h>
#include <linux/pci_ids.h>

#include "edac_module.h"
#include "amd8131_edac.h"

#define AMD8131_EDAC_REVISION	" Ver: 1.0.0"
#define AMD8131_EDAC_MOD_STR	"amd8131_edac"

/* Wrapper functions for accessing PCI configuration space */
static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
{
	int ret;

	ret = pci_read_config_dword(dev, reg, val32);
	if (ret != 0)
		printk(KERN_ERR AMD8131_EDAC_MOD_STR
			" PCI Access Read Error at 0x%x\n", reg);
}

static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
{
	int ret;

	ret = pci_write_config_dword(dev, reg, val32);
	if (ret != 0)
		printk(KERN_ERR AMD8131_EDAC_MOD_STR
			" PCI Access Write Error at 0x%x\n", reg);
}

/* Support up to two AMD8131 chipsets on a platform */
static struct amd8131_dev_info amd8131_devices[] = {
	{
	.inst = NORTH_A,
	.devfn = DEVFN_PCIX_BRIDGE_NORTH_A,
	.ctl_name = "AMD8131_PCIX_NORTH_A",
	},
	{
	.inst = NORTH_B,
	.devfn = DEVFN_PCIX_BRIDGE_NORTH_B,
	.ctl_name = "AMD8131_PCIX_NORTH_B",
	},
	{
	.inst = SOUTH_A,
	.devfn = DEVFN_PCIX_BRIDGE_SOUTH_A,
	.ctl_name = "AMD8131_PCIX_SOUTH_A",
	},
	{
	.inst = SOUTH_B,
	.devfn = DEVFN_PCIX_BRIDGE_SOUTH_B,
	.ctl_name = "AMD8131_PCIX_SOUTH_B",
	},
	{.inst = NO_BRIDGE,},
};

static void amd8131_pcix_init(struct amd8131_dev_info *dev_info)
{
	u32 val32;
	struct pci_dev *dev = dev_info->dev;

	/* First clear error detection flags */
	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
	if (val32 & MEM_LIMIT_MASK)
		edac_pci_write_dword(dev, REG_MEM_LIM, val32);

	/* Clear Discard Timer Timedout flag */
	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
	if (val32 & INT_CTLR_DTS)
		edac_pci_write_dword(dev, REG_INT_CTLR, val32);

	/* Clear CRC Error flag on link side A */
	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
	if (val32 & LNK_CTRL_CRCERR_A)
		edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);

	/* Clear CRC Error flag on link side B */
	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
	if (val32 & LNK_CTRL_CRCERR_B)
		edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);

	/*
	 * Then enable all error detections.
	 *
	 * Setup Discard Timer Sync Flood Enable,
	 * System Error Enable and Parity Error Enable.
	 */
	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
	val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE;
	edac_pci_write_dword(dev, REG_INT_CTLR, val32);

	/* Enable overall SERR Error detection */
	edac_pci_read_dword(dev, REG_STS_CMD, &val32);
	val32 |= STS_CMD_SERREN;
	edac_pci_write_dword(dev, REG_STS_CMD, val32);

	/* Setup CRC Flood Enable for link side A */
	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
	val32 |= LNK_CTRL_CRCFEN;
	edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);

	/* Setup CRC Flood Enable for link side B */
	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
	val32 |= LNK_CTRL_CRCFEN;
	edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
}

static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info)
{
	u32 val32;
	struct pci_dev *dev = dev_info->dev;

	/* Disable SERR, PERR and DTSE Error detection */
	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
	val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE);
	edac_pci_write_dword(dev, REG_INT_CTLR, val32);

	/* Disable overall System Error detection */
	edac_pci_read_dword(dev, REG_STS_CMD, &val32);
	val32 &= ~STS_CMD_SERREN;
	edac_pci_write_dword(dev, REG_STS_CMD, val32);

	/* Disable CRC Sync Flood on link side A */
	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
	val32 &= ~LNK_CTRL_CRCFEN;
	edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);

	/* Disable CRC Sync Flood on link side B */
	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
	val32 &= ~LNK_CTRL_CRCFEN;
	edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
}

static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev)
{
	struct amd8131_dev_info *dev_info = edac_dev->pvt_info;
	struct pci_dev *dev = dev_info->dev;
	u32 val32;

	/* Check PCI-X Bridge Memory Base-Limit Register for errors */
	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
	if (val32 & MEM_LIMIT_MASK) {
		printk(KERN_INFO "Error(s) in mem limit register "
			"on %s bridge\n", dev_info->ctl_name);
		printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
			"RTA: %d, STA: %d, MDPE: %d\n",
			val32 & MEM_LIMIT_DPE,
			val32 & MEM_LIMIT_RSE,
			val32 & MEM_LIMIT_RMA,
			val32 & MEM_LIMIT_RTA,
			val32 & MEM_LIMIT_STA,
			val32 & MEM_LIMIT_MDPE);

		val32 |= MEM_LIMIT_MASK;
		edac_pci_write_dword(dev, REG_MEM_LIM, val32);

		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
	}

	/* Check if Discard Timer timed out */
	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
	if (val32 & INT_CTLR_DTS) {
		printk(KERN_INFO "Error(s) in interrupt and control register "
			"on %s bridge\n", dev_info->ctl_name);
		printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS);

		val32 |= INT_CTLR_DTS;
		edac_pci_write_dword(dev, REG_INT_CTLR, val32);

		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
	}

	/* Check if CRC error happens on link side A */
	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
	if (val32 & LNK_CTRL_CRCERR_A) {
		printk(KERN_INFO "Error(s) in link conf and control register "
			"on %s bridge\n", dev_info->ctl_name);
		printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A);

		val32 |= LNK_CTRL_CRCERR_A;
		edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);

		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
	}

	/* Check if CRC error happens on link side B */
	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
	if (val32 & LNK_CTRL_CRCERR_B) {
		printk(KERN_INFO "Error(s) in link conf and control register "
			"on %s bridge\n", dev_info->ctl_name);
		printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B);

		val32 |= LNK_CTRL_CRCERR_B;
		edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);

		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
	}
}

static struct amd8131_info amd8131_chipset = {
	.err_dev = PCI_DEVICE_ID_AMD_8131_APIC,
	.devices = amd8131_devices,
	.init = amd8131_pcix_init,
	.exit = amd8131_pcix_exit,
	.check = amd8131_pcix_check,
};

/*
 * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID,
 * so amd8131_probe() would be called by kernel 4 times, with different
 * address of pci_dev for each of them each time.
 */
static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	struct amd8131_dev_info *dev_info;

	for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
		dev_info++)
		if (dev_info->devfn == dev->devfn)
			break;

	if (dev_info->inst == NO_BRIDGE) /* should never happen */
		return -ENODEV;

	/*
	 * We can't call pci_get_device() as we are used to do because
	 * there are 4 of them but pci_dev_get() instead.
	 */
	dev_info->dev = pci_dev_get(dev);

	if (pci_enable_device(dev_info->dev)) {
		pci_dev_put(dev_info->dev);
		printk(KERN_ERR "failed to enable:"
			"vendor %x, device %x, devfn %x, name %s\n",
			PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
			dev_info->devfn, dev_info->ctl_name);
		return -ENODEV;
	}

	/*
	 * we do not allocate extra private structure for
	 * edac_pci_ctl_info, but make use of existing
	 * one instead.
	 */
	dev_info->edac_idx = edac_pci_alloc_index();
	dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name);
	if (!dev_info->edac_dev)
		return -ENOMEM;

	dev_info->edac_dev->pvt_info = dev_info;
	dev_info->edac_dev->dev = &dev_info->dev->dev;
	dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);

	if (edac_op_state == EDAC_OPSTATE_POLL)
		dev_info->edac_dev->edac_check = amd8131_chipset.check;

	if (amd8131_chipset.init)
		amd8131_chipset.init(dev_info);

	if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) {
		printk(KERN_ERR "failed edac_pci_add_device() for %s\n",
			dev_info->ctl_name);
		edac_pci_free_ctl_info(dev_info->edac_dev);
		return -ENODEV;
	}

	printk(KERN_INFO "added one device on AMD8131 "
		"vendor %x, device %x, devfn %x, name %s\n",
		PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
		dev_info->devfn, dev_info->ctl_name);

	return 0;
}

static void amd8131_remove(struct pci_dev *dev)
{
	struct amd8131_dev_info *dev_info;

	for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
		dev_info++)
		if (dev_info->devfn == dev->devfn)
			break;

	if (dev_info->inst == NO_BRIDGE) /* should never happen */
		return;

	if (dev_info->edac_dev) {
		edac_pci_del_device(dev_info->edac_dev->dev);
		edac_pci_free_ctl_info(dev_info->edac_dev);
	}

	if (amd8131_chipset.exit)
		amd8131_chipset.exit(dev_info);

	pci_dev_put(dev_info->dev);
}

static const struct pci_device_id amd8131_edac_pci_tbl[] = {
	{
	PCI_VEND_DEV(AMD, 8131_BRIDGE),
	.subvendor = PCI_ANY_ID,
	.subdevice = PCI_ANY_ID,
	.class = 0,
	.class_mask = 0,
	.driver_data = 0,
	},
	{
	0,
	}			/* table is NULL-terminated */
};
MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl);

static struct pci_driver amd8131_edac_driver = {
	.name = AMD8131_EDAC_MOD_STR,
	.probe = amd8131_probe,
	.remove = amd8131_remove,
	.id_table = amd8131_edac_pci_tbl,
};

static int __init amd8131_edac_init(void)
{
	printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n");
	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");

	/* Only POLL mode supported so far */
	edac_op_state = EDAC_OPSTATE_POLL;

	return pci_register_driver(&amd8131_edac_driver);
}

static void __exit amd8131_edac_exit(void)
{
	pci_unregister_driver(&amd8131_edac_driver);
}

module_init(amd8131_edac_init);
module_exit(amd8131_edac_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module");