xref: /openbmc/linux/arch/mips/boot/dts/ingenic/jz4780.dtsi (revision 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62)

// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/dma/jz4780-dma.h>

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "ingenic,jz4780";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
			reg = <0>;

			clocks = <&cgu JZ4780_CLK_CPU>;
			clock-names = "cpu";
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
			reg = <1>;

			clocks = <&cgu JZ4780_CLK_CORE1>;
			clock-names = "cpu";
		};
	};

	cpuintc: interrupt-controller {
		#address-cells = <0>;
		#interrupt-cells = <1>;
		interrupt-controller;
		compatible = "mti,cpu-interrupt-controller";
	};

	intc: interrupt-controller@10001000 {
		compatible = "ingenic,jz4780-intc";
		reg = <0x10001000 0x50>;

		interrupt-controller;
		#interrupt-cells = <1>;

		interrupt-parent = <&cpuintc>;
		interrupts = <2>;
	};

	ext: ext {
		compatible = "fixed-clock";
		#clock-cells = <0>;
	};

	rtc: rtc {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <32768>;
	};

	cgu: jz4780-cgu@10000000 {
		compatible = "ingenic,jz4780-cgu", "simple-mfd";
		reg = <0x10000000 0x100>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x10000000 0x100>;

		#clock-cells = <1>;

		clocks = <&ext>, <&rtc>;
		clock-names = "ext", "rtc";

		otg_phy: usb-phy@3c {
			compatible = "ingenic,jz4780-phy";
			reg = <0x3c 0x10>;

			clocks = <&cgu JZ4780_CLK_OTG1>;

			#phy-cells = <0>;

			status = "disabled";
		};

		rng: rng@d8 {
			compatible = "ingenic,jz4780-rng";
			reg = <0xd8 0x8>;

			status = "disabled";
		};
	};

	tcu: timer@10002000 {
		compatible = "ingenic,jz4780-tcu",
			     "ingenic,jz4770-tcu",
			     "simple-mfd";
		reg = <0x10002000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x10002000 0x1000>;

		#clock-cells = <1>;

		clocks = <&cgu JZ4780_CLK_RTCLK>,
			 <&cgu JZ4780_CLK_EXCLK>,
			 <&cgu JZ4780_CLK_PCLK>;
		clock-names = "rtc", "ext", "pclk";

		interrupt-controller;
		#interrupt-cells = <1>;

		interrupt-parent = <&intc>;
		interrupts = <27 26 25>;

		watchdog: watchdog@0 {
			compatible = "ingenic,jz4780-watchdog";
			reg = <0x0 0xc>;

			clocks = <&tcu TCU_CLK_WDT>;
			clock-names = "wdt";
		};

		pwm: pwm@40 {
			compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
			reg = <0x40 0x80>;

			#pwm-cells = <3>;

			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
			clock-names = "timer0", "timer1", "timer2", "timer3",
				      "timer4", "timer5", "timer6", "timer7";
		};

		ost: timer@e0 {
			compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
			reg = <0xe0 0x20>;

			clocks = <&tcu TCU_CLK_OST>;
			clock-names = "ost";

			interrupts = <15>;
		};
	};

	rtc_dev: rtc@10003000 {
		compatible = "ingenic,jz4780-rtc";
		reg = <0x10003000 0x4c>;

		interrupt-parent = <&intc>;
		interrupts = <32>;

		clocks = <&cgu JZ4780_CLK_RTCLK>;
		clock-names = "rtc";
	};

	pinctrl: pin-controller@10010000 {
		compatible = "ingenic,jz4780-pinctrl";
		reg = <0x10010000 0x600>;

		#address-cells = <1>;
		#size-cells = <0>;

		gpa: gpio@0 {
			compatible = "ingenic,jz4780-gpio";
			reg = <0>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 0 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <17>;
		};

		gpb: gpio@1 {
			compatible = "ingenic,jz4780-gpio";
			reg = <1>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 32 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <16>;
		};

		gpc: gpio@2 {
			compatible = "ingenic,jz4780-gpio";
			reg = <2>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 64 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <15>;
		};

		gpd: gpio@3 {
			compatible = "ingenic,jz4780-gpio";
			reg = <3>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 96 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <14>;
		};

		gpe: gpio@4 {
			compatible = "ingenic,jz4780-gpio";
			reg = <4>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 128 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <13>;
		};

		gpf: gpio@5 {
			compatible = "ingenic,jz4780-gpio";
			reg = <5>;

			gpio-controller;
			gpio-ranges = <&pinctrl 0 160 32>;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			interrupt-parent = <&intc>;
			interrupts = <12>;
		};
	};

	spi0: spi@10043000 {
		compatible = "ingenic,jz4780-spi";
		reg = <0x10043000 0x1c>;
		#address-cells = <1>;
		#size-cells = <0>;

		interrupt-parent = <&intc>;
		interrupts = <8>;

		clocks = <&cgu JZ4780_CLK_SSI0>;
		clock-names = "spi";

		dmas = <&dma JZ4780_DMA_SSI0_RX 0xffffffff>,
		       <&dma JZ4780_DMA_SSI0_TX 0xffffffff>;
		dma-names = "rx", "tx";

		status = "disabled";
	};

	uart0: serial@10030000 {
		compatible = "ingenic,jz4780-uart";
		reg = <0x10030000 0x100>;

		interrupt-parent = <&intc>;
		interrupts = <51>;

		clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
		clock-names = "baud", "module";

		status = "disabled";
	};

	uart1: serial@10031000 {
		compatible = "ingenic,jz4780-uart";
		reg = <0x10031000 0x100>;

		interrupt-parent = <&intc>;
		interrupts = <50>;

		clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
		clock-names = "baud", "module";

		status = "disabled";
	};

	uart2: serial@10032000 {
		compatible = "ingenic,jz4780-uart";
		reg = <0x10032000 0x100>;

		interrupt-parent = <&intc>;
		interrupts = <49>;

		clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
		clock-names = "baud", "module";

		status = "disabled";
	};

	uart3: serial@10033000 {
		compatible = "ingenic,jz4780-uart";
		reg = <0x10033000 0x100>;

		interrupt-parent = <&intc>;
		interrupts = <48>;

		clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
		clock-names = "baud", "module";

		status = "disabled";
	};

	uart4: serial@10034000 {
		compatible = "ingenic,jz4780-uart";
		reg = <0x10034000 0x100>;

		interrupt-parent = <&intc>;
		interrupts = <34>;

		clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
		clock-names = "baud", "module";

		status = "disabled";
	};

	spi1: spi@10044000 {
		compatible = "ingenic,jz4780-spi";
		reg = <0x10044000 0x1c>;
		#address-cells = <1>;
		#size-sells = <0>;

		interrupt-parent = <&intc>;
		interrupts = <7>;

		clocks = <&cgu JZ4780_CLK_SSI1>;
		clock-names = "spi";

		dmas = <&dma JZ4780_DMA_SSI1_RX 0xffffffff>,
		       <&dma JZ4780_DMA_SSI1_TX 0xffffffff>;
		dma-names = "rx", "tx";

		status = "disabled";
	};

	i2c0: i2c@10050000 {
		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
		#address-cells = <1>;
		#size-cells = <0>;

		reg = <0x10050000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <60>;

		clocks = <&cgu JZ4780_CLK_SMB0>;
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pins_i2c0_data>;

		status = "disabled";
	};

	i2c1: i2c@10051000 {
		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10051000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <59>;

		clocks = <&cgu JZ4780_CLK_SMB1>;
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pins_i2c1_data>;

		status = "disabled";
	};

	i2c2: i2c@10052000 {
		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10052000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <58>;

		clocks = <&cgu JZ4780_CLK_SMB2>;
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pins_i2c2_data>;

		status = "disabled";
	};

	i2c3: i2c@10053000 {
		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10053000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <57>;

		clocks = <&cgu JZ4780_CLK_SMB3>;
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pins_i2c3_data>;

		status = "disabled";
	};

	i2c4: i2c@10054000 {
		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10054000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <56>;

		clocks = <&cgu JZ4780_CLK_SMB4>;
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pins_i2c4_data>;

		status = "disabled";
	};

	hdmi: hdmi@10180000 {
		compatible = "ingenic,jz4780-dw-hdmi";
		reg = <0x10180000 0x8000>;
		reg-io-width = <4>;

		clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
		clock-names = "iahb", "isfr";

		interrupt-parent = <&intc>;
		interrupts = <3>;

		status = "disabled";
	};

	lcdc0: lcdc0@13050000 {
		compatible = "ingenic,jz4780-lcd";
		reg = <0x13050000 0x1800>;

		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
		clock-names = "lcd", "lcd_pclk";

		interrupt-parent = <&intc>;
		interrupts = <31>;

		status = "disabled";
	};

	lcdc1: lcdc1@130a0000 {
		compatible = "ingenic,jz4780-lcd";
		reg = <0x130a0000 0x1800>;

		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
		clock-names = "lcd", "lcd_pclk";

		interrupt-parent = <&intc>;
		interrupts = <23>;

		status = "disabled";
	};

	nemc: nemc@13410000 {
		compatible = "ingenic,jz4780-nemc", "simple-mfd";
		reg = <0x13410000 0x10000>;
		#address-cells = <2>;
		#size-cells = <1>;
		ranges = <0 0 0x13410000 0x10000>,
			 <1 0 0x1b000000 0x1000000>,
			 <2 0 0x1a000000 0x1000000>,
			 <3 0 0x19000000 0x1000000>,
			 <4 0 0x18000000 0x1000000>,
			 <5 0 0x17000000 0x1000000>,
			 <6 0 0x16000000 0x1000000>;

		clocks = <&cgu JZ4780_CLK_NEMC>;

		status = "disabled";

		efuse: efuse@d0 {
			reg = <0 0xd0 0x30>;
			compatible = "ingenic,jz4780-efuse";

			clocks = <&cgu JZ4780_CLK_AHB2>;

			#address-cells = <1>;
			#size-cells = <1>;

			eth0_addr: eth-mac-addr@22 {
				reg = <0x22 0x6>;
			};
		};
	};

	dma: dma@13420000 {
		compatible = "ingenic,jz4780-dma";
		reg = <0x13420000 0x400>, <0x13421000 0x40>;
		#dma-cells = <2>;

		interrupt-parent = <&intc>;
		interrupts = <10>;

		clocks = <&cgu JZ4780_CLK_PDMA>;
	};

	mmc0: mmc@13450000 {
		compatible = "ingenic,jz4780-mmc";
		reg = <0x13450000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <37>;

		clocks = <&cgu JZ4780_CLK_MSC0>;
		clock-names = "mmc";

		cap-sd-highspeed;
		cap-mmc-highspeed;
		cap-sdio-irq;
		dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
		       <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
		dma-names = "rx", "tx";

		status = "disabled";
	};

	mmc1: mmc@13460000 {
		compatible = "ingenic,jz4780-mmc";
		reg = <0x13460000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <36>;

		clocks = <&cgu JZ4780_CLK_MSC1>;
		clock-names = "mmc";

		cap-sd-highspeed;
		cap-mmc-highspeed;
		cap-sdio-irq;
		dmas = <&dma JZ4780_DMA_MSC1_RX 0xffffffff>,
		       <&dma JZ4780_DMA_MSC1_TX 0xffffffff>;
		dma-names = "rx", "tx";

		status = "disabled";
	};

	bch: bch@134d0000 {
		compatible = "ingenic,jz4780-bch";
		reg = <0x134d0000 0x10000>;

		clocks = <&cgu JZ4780_CLK_BCH>;

		status = "disabled";
	};

	otg: usb@13500000 {
		compatible = "ingenic,jz4780-otg", "snps,dwc2";
		reg = <0x13500000 0x40000>;

		interrupt-parent = <&intc>;
		interrupts = <21>;

		clocks = <&cgu JZ4780_CLK_UHC>;
		clock-names = "otg";

		phys = <&otg_phy>;
		phy-names = "usb2-phy";

		g-rx-fifo-size = <768>;
		g-np-tx-fifo-size = <256>;
		g-tx-fifo-size = <256 256 256 256 256 256 256 512>;

		status = "disabled";
	};
};