xref: /openbmc/linux/arch/arm64/boot/dts/qcom/sdm660.dtsi (revision feec34411d4c0a9759106ef4f7d563438b3881ae)

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2018, Craig Tatlor.
 * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sdm660.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo_board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
			clock-output-names = "xo_board";
		};

		sleep_clk: sleep_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32764>;
			clock-output-names = "sleep_clk";
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@100 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x100>;
			enable-method = "psci";
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&L2_1>;
			L2_1: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
			L1_I_100: l1-icache {
				compatible = "cache";
			};
			L1_D_100: l1-dcache {
				compatible = "cache";
			};
		};

		CPU1: cpu@101 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x101>;
			enable-method = "psci";
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&L2_1>;
			L1_I_101: l1-icache {
				compatible = "cache";
			};
			L1_D_101: l1-dcache {
				compatible = "cache";
			};
		};

		CPU2: cpu@102 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x102>;
			enable-method = "psci";
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&L2_1>;
			L1_I_102: l1-icache {
				compatible = "cache";
			};
			L1_D_102: l1-dcache {
				compatible = "cache";
			};
		};

		CPU3: cpu@103 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x103>;
			enable-method = "psci";
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&L2_1>;
			L1_I_103: l1-icache {
				compatible = "cache";
			};
			L1_D_103: l1-dcache {
				compatible = "cache";
			};
		};

		CPU4: cpu@0 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x0>;
			enable-method = "psci";
			capacity-dmips-mhz = <640>;
			next-level-cache = <&L2_0>;
			L2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
			L1_I_0: l1-icache {
				compatible = "cache";
			};
			L1_D_0: l1-dcache {
				compatible = "cache";
			};
		};

		CPU5: cpu@1 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x1>;
			enable-method = "psci";
			capacity-dmips-mhz = <640>;
			next-level-cache = <&L2_0>;
			L1_I_1: l1-icache {
				compatible = "cache";
			};
			L1_D_1: l1-dcache {
				compatible = "cache";
			};
		};

		CPU6: cpu@2 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x2>;
			enable-method = "psci";
			capacity-dmips-mhz = <640>;
			next-level-cache = <&L2_0>;
			L1_I_2: l1-icache {
				compatible = "cache";
			};
			L1_D_2: l1-dcache {
				compatible = "cache";
			};
		};

		CPU7: cpu@3 {
			device_type = "cpu";
			compatible = "qcom,kryo260";
			reg = <0x0 0x3>;
			enable-method = "psci";
			capacity-dmips-mhz = <640>;
			next-level-cache = <&L2_0>;
			L1_I_3: l1-icache {
				compatible = "cache";
			};
			L1_D_3: l1-dcache {
				compatible = "cache";
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU4>;
				};

				core1 {
					cpu = <&CPU5>;
				};

				core2 {
					cpu = <&CPU6>;
				};

				core3 {
					cpu = <&CPU7>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};
			};
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm";
		};
	};

	memory {
		device_type = "memory";
		/* We expect the bootloader to fill in the reg */
		reg = <0 0 0 0>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
	};

	soc: soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		gcc: clock-controller@100000 {
			compatible = "qcom,gcc-sdm660";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			reg = <0x00100000 0x94000>;
		};

		tlmm: pinctrl@3100000 {
			compatible = "qcom,sdm660-pinctrl";
			reg = <0x03100000 0x400000>,
			      <0x03500000 0x400000>,
			      <0x03900000 0x400000>;
			reg-names = "south", "center", "north";
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 114>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			uart_console_active: uart_console_active {
				pinmux {
					pins = "gpio4", "gpio5";
					function = "blsp_uart2";
				};

				pinconf {
					pins = "gpio4", "gpio5";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		spmi_bus: spmi@800f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0800f000 0x1000>,
			      <0x08400000 0x1000000>,
			      <0x09400000 0x1000000>,
			      <0x0a400000 0x220000>,
			      <0x0800a000 0x3000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
			cell-index = <0>;
		};

		blsp1_uart2: serial@c170000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c170000 0x1000>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			status = "disabled";
		};

		timer@17920000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0x17920000 0x1000>;

			frame@17921000 {
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17921000 0x1000>,
				      <0x17922000 0x1000>;
			};

			frame@17923000 {
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17923000 0x1000>;
				status = "disabled";
			};

			frame@17924000 {
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17924000 0x1000>;
				status = "disabled";
			};

			frame@17925000 {
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17925000 0x1000>;
				status = "disabled";
			};

			frame@17926000 {
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17926000 0x1000>;
				status = "disabled";
			};

			frame@17927000 {
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17927000 0x1000>;
				status = "disabled";
			};

			frame@17928000 {
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x17928000 0x1000>;
				status = "disabled";
			};
		};

		intc: interrupt-controller@17a00000 {
			compatible = "arm,gic-v3";
			reg = <0x17a00000 0x10000>,
			      <0x17b00000 0x100000>;
			#interrupt-cells = <3>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			interrupt-controller;
			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		};
	};
};