1if ARCH_DAVINCI 2 3config AINTC 4 bool 5 6config CP_INTC 7 bool 8 select IRQ_DOMAIN 9 10config ARCH_DAVINCI_DMx 11 bool 12 select CPU_ARM926T 13 14menu "TI DaVinci Implementations" 15 16comment "DaVinci Core Type" 17 18config ARCH_DAVINCI_DM644x 19 bool "DaVinci 644x based system" 20 select AINTC 21 select ARCH_DAVINCI_DMx 22 23config ARCH_DAVINCI_DM355 24 bool "DaVinci 355 based system" 25 select AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM646x 29 bool "DaVinci 646x based system" 30 select AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DA830 34 bool "DA830/OMAP-L137/AM17x based system" 35 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR 36 select ARCH_DAVINCI_DA8XX 37 # needed on silicon revs 1.0, 1.1: 38 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 39 select CP_INTC 40 41config ARCH_DAVINCI_DA850 42 bool "DA850/OMAP-L138/AM18x based system" 43 depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR 44 select ARCH_DAVINCI_DA8XX 45 select CP_INTC 46 47config ARCH_DAVINCI_DA8XX 48 bool 49 select CPU_ARM926T 50 51config ARCH_DAVINCI_DM365 52 bool "DaVinci 365 based system" 53 select AINTC 54 select ARCH_DAVINCI_DMx 55 56comment "DaVinci Board Type" 57 58config MACH_DA8XX_DT 59 bool "Support DA8XX platforms using device tree" 60 default y 61 depends on ARCH_DAVINCI_DA8XX 62 select PINCTRL 63 help 64 Say y here to include support for TI DaVinci DA850 based using 65 Flattened Device Tree. More information at Documentation/devicetree 66 67config MACH_DAVINCI_EVM 68 bool "TI DM644x EVM" 69 default ARCH_DAVINCI_DM644x 70 depends on ARCH_DAVINCI_DM644x 71 select EEPROM_AT24 72 select I2C 73 help 74 Configure this option to specify the whether the board used 75 for development is a DM644x EVM 76 77config MACH_SFFSDR 78 bool "Lyrtech SFFSDR" 79 depends on ARCH_DAVINCI_DM644x 80 select EEPROM_AT24 81 select I2C 82 help 83 Say Y here to select the Lyrtech Small Form Factor 84 Software Defined Radio (SFFSDR) board. 85 86config MACH_NEUROS_OSD2 87 bool "Neuros OSD2 Open Television Set Top Box" 88 depends on ARCH_DAVINCI_DM644x 89 help 90 Configure this option to specify the whether the board used 91 for development is a Neuros OSD2 Open Set Top Box. 92 93config MACH_DAVINCI_DM355_EVM 94 bool "TI DM355 EVM" 95 default ARCH_DAVINCI_DM355 96 depends on ARCH_DAVINCI_DM355 97 help 98 Configure this option to specify the whether the board used 99 for development is a DM355 EVM 100 101config MACH_DM355_LEOPARD 102 bool "DM355 Leopard board" 103 depends on ARCH_DAVINCI_DM355 104 help 105 Configure this option to specify the whether the board used 106 for development is a DM355 Leopard board. 107 108config MACH_DAVINCI_DM6467_EVM 109 bool "TI DM6467 EVM" 110 default ARCH_DAVINCI_DM646x 111 depends on ARCH_DAVINCI_DM646x 112 select EEPROM_AT24 113 select I2C 114 select MACH_DAVINCI_DM6467TEVM 115 help 116 Configure this option to specify the whether the board used 117 for development is a DM6467 EVM 118 119config MACH_DAVINCI_DM6467TEVM 120 bool 121 122config MACH_DAVINCI_DM365_EVM 123 bool "TI DM365 EVM" 124 default ARCH_DAVINCI_DM365 125 depends on ARCH_DAVINCI_DM365 126 select EEPROM_AT24 127 select I2C 128 help 129 Configure this option to specify whether the board used 130 for development is a DM365 EVM 131 132config MACH_DAVINCI_DA830_EVM 133 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 134 default ARCH_DAVINCI_DA830 135 depends on ARCH_DAVINCI_DA830 136 select EEPROM_AT24 137 select GPIO_PCF857X 138 select I2C 139 help 140 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 141 142choice 143 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 144 depends on MACH_DAVINCI_DA830_EVM 145 help 146 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 147 detected automatically based on successful probe of the I2C 148 based GPIO expander on that board. This option selected in this 149 menu has an effect only in case of a successful UI card detection. 150 151config DA830_UI_LCD 152 bool "LCD" 153 help 154 Say Y here to use the LCD as a framebuffer or simple character 155 display. 156 157config DA830_UI_NAND 158 bool "NAND flash" 159 help 160 Say Y here to use the NAND flash. Do not forget to setup 161 the switch correctly. 162endchoice 163 164config MACH_DAVINCI_DA850_EVM 165 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 166 default ARCH_DAVINCI_DA850 167 depends on ARCH_DAVINCI_DA850 168 help 169 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 170 171choice 172 prompt "Select peripherals connected to expander on UI board" 173 depends on MACH_DAVINCI_DA850_EVM 174 help 175 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 176 EVM is detected automatically based on successful probe of the I2C 177 based GPIO expander on that card. This option selected in this 178 menu has an effect only in case of a successful UI card detection. 179 180config DA850_UI_NONE 181 bool "No peripheral is enabled" 182 help 183 Say Y if you do not want to enable any of the peripherals connected 184 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 185 186config DA850_UI_RMII 187 bool "RMII Ethernet PHY" 188 help 189 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 190 EVM. This PHY is found on the UI daughter card that is supplied with 191 the EVM. 192 NOTE: Please take care while choosing this option, MII PHY will 193 not be functional if RMII mode is selected. 194 195config DA850_UI_SD_VIDEO_PORT 196 bool "Video Port Interface" 197 help 198 Say Y if you want to use Video Port Interface (VPIF) on the 199 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 200 UI daughter card that is supplied with the EVM. 201 202endchoice 203 204config MACH_MITYOMAPL138 205 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 206 depends on ARCH_DAVINCI_DA850 207 select EEPROM_AT24 208 select I2C 209 help 210 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 211 System on Module. Information on this SoM may be found at 212 http://www.mitydsp.com 213 214config MACH_OMAPL138_HAWKBOARD 215 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 216 depends on ARCH_DAVINCI_DA850 217 help 218 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 219 Information of this board may be found at 220 http://www.hawkboard.org/ 221 222config DAVINCI_MUX 223 bool "DAVINCI multiplexing support" 224 depends on ARCH_DAVINCI 225 default y 226 help 227 Pin multiplexing support for DAVINCI boards. If your bootloader 228 sets the multiplexing correctly, say N. Otherwise, or if unsure, 229 say Y. 230 231config DAVINCI_MUX_DEBUG 232 bool "Multiplexing debug output" 233 depends on DAVINCI_MUX 234 help 235 Makes the multiplexing functions print out a lot of debug info. 236 This is useful if you want to find out the correct values of the 237 multiplexing registers. 238 239config DAVINCI_MUX_WARNINGS 240 bool "Warn about pins the bootloader didn't set up" 241 depends on DAVINCI_MUX 242 help 243 Choose Y here to warn whenever driver initialization logic needs 244 to change the pin multiplexing setup. When there are no warnings 245 printed, it's safe to deselect DAVINCI_MUX for your product. 246 247config DAVINCI_RESET_CLOCKS 248 bool "Reset unused clocks during boot" 249 depends on ARCH_DAVINCI 250 help 251 Say Y if you want to reset unused clocks during boot. 252 This option saves power, but assumes all drivers are 253 using the clock framework. Broken drivers that do not 254 yet use clock framework may not work with this option. 255 If you are booting from another operating system, you 256 probably do not want this option enabled until your 257 device drivers work properly. 258 259endmenu 260 261endif 262