xref: /openbmc/linux/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi (revision 2612e3bbc0386368a850140a6c9b990cd496a5ec)

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2017-2022 Toradex
 */

/ {
	chosen {
		stdout-path = "serial0:115200n8";
	};

	/* fixed crystal dedicated to mcp2515 */
	clk16m: clk16m {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <16000000>;
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_5v0: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "5V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usbh_vbus: regulator-usbh-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh_reg>;
		regulator-name = "VCC_USB[1-4]";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
		vin-supply = <&reg_5v0>;
	};
};

&adc1 {
	status = "okay";
};

&ecspi1 {
	status = "okay";

	mcp2515: can@0 {
		compatible = "microchip,mcp2515";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can_int>;
		reg = <0>;
		clocks = <&clk16m>;
		interrupt-parent = <&gpio2>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
		spi-max-frequency = <10000000>;
		vdd-supply = <&reg_3v3>;
		xceiver-supply = <&reg_5v0>;
		status = "okay";
	};
};

&i2c1 {
	status = "okay";

	/* M41T0M6 real time clock on carrier board */
	m41t0m6: rtc@68 {
		compatible = "st,m41t0";
		reg = <0x68>;
	};
};

/* PWM <A> */
&pwm4 {
	status = "okay";
};

/* PWM <B> */
&pwm5 {
	status = "okay";
};

/* PWM <C> */
&pwm6 {
	status = "okay";
};

/* PWM <D> */
&pwm7 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart5 {
	status = "okay";
};

&usbotg1 {
	disable-over-current;
	vbus-supply = <&reg_usbh_vbus>;
	status = "okay";
};

&usbotg2 {
	disable-over-current;
	vbus-supply = <&reg_usbh_vbus>;
	status = "okay";
};

&usdhc1 {
	vmmc-supply = <&reg_3v3>;
	status = "okay";
};