1# SPDX-License-Identifier: GPL-2.0 2VERSION = 5 3PATCHLEVEL = 12 4SUBLEVEL = 0 5EXTRAVERSION = 6NAME = Frozen Wasteland 7 8# *DOCUMENTATION* 9# To see a list of typical targets execute "make help" 10# More info can be located in ./README 11# Comments in this file are targeted only to the developer, do not 12# expect to learn how to build the kernel reading this file. 13 14$(if $(filter __%, $(MAKECMDGOALS)), \ 15 $(error targets prefixed with '__' are only for internal use)) 16 17# That's our default target when none is given on the command line 18PHONY := __all 19__all: 20 21# We are using a recursive build, so we need to do a little thinking 22# to get the ordering right. 23# 24# Most importantly: sub-Makefiles should only ever modify files in 25# their own directory. If in some directory we have a dependency on 26# a file in another dir (which doesn't happen often, but it's often 27# unavoidable when linking the built-in.a targets which finally 28# turn into vmlinux), we will call a sub make in that other dir, and 29# after that we are sure that everything which is in that other dir 30# is now up to date. 31# 32# The only cases where we need to modify files which have global 33# effects are thus separated out and done before the recursive 34# descending is started. They are now explicitly listed as the 35# prepare rule. 36 37ifneq ($(sub_make_done),1) 38 39# Do not use make's built-in rules and variables 40# (this increases performance and avoids hard-to-debug behaviour) 41MAKEFLAGS += -rR 42 43# Avoid funny character set dependencies 44unexport LC_ALL 45LC_COLLATE=C 46LC_NUMERIC=C 47export LC_COLLATE LC_NUMERIC 48 49# Avoid interference with shell env settings 50unexport GREP_OPTIONS 51 52# Beautify output 53# --------------------------------------------------------------------------- 54# 55# Normally, we echo the whole command before executing it. By making 56# that echo $($(quiet)$(cmd)), we now have the possibility to set 57# $(quiet) to choose other forms of output instead, e.g. 58# 59# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 60# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 61# 62# If $(quiet) is empty, the whole command will be printed. 63# If it is set to "quiet_", only the short version will be printed. 64# If it is set to "silent_", nothing will be printed at all, since 65# the variable $(silent_cmd_cc_o_c) doesn't exist. 66# 67# A simple variant is to prefix commands with $(Q) - that's useful 68# for commands that shall be hidden in non-verbose mode. 69# 70# $(Q)ln $@ :< 71# 72# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 73# If KBUILD_VERBOSE equals 1 then the above command is displayed. 74# If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt. 75# 76# To put more focus on warnings, be less verbose as default 77# Use 'make V=1' to see the full commands 78 79ifeq ("$(origin V)", "command line") 80 KBUILD_VERBOSE = $(V) 81endif 82ifndef KBUILD_VERBOSE 83 KBUILD_VERBOSE = 0 84endif 85 86ifeq ($(KBUILD_VERBOSE),1) 87 quiet = 88 Q = 89else 90 quiet=quiet_ 91 Q = @ 92endif 93 94# If the user is running make -s (silent mode), suppress echoing of 95# commands 96 97ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),) 98 quiet=silent_ 99 KBUILD_VERBOSE = 0 100endif 101 102export quiet Q KBUILD_VERBOSE 103 104# Call a source code checker (by default, "sparse") as part of the 105# C compilation. 106# 107# Use 'make C=1' to enable checking of only re-compiled files. 108# Use 'make C=2' to enable checking of *all* source files, regardless 109# of whether they are re-compiled or not. 110# 111# See the file "Documentation/dev-tools/sparse.rst" for more details, 112# including where to get the "sparse" utility. 113 114ifeq ("$(origin C)", "command line") 115 KBUILD_CHECKSRC = $(C) 116endif 117ifndef KBUILD_CHECKSRC 118 KBUILD_CHECKSRC = 0 119endif 120 121export KBUILD_CHECKSRC 122 123# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the 124# directory of external module to build. Setting M= takes precedence. 125ifeq ("$(origin M)", "command line") 126 KBUILD_EXTMOD := $(M) 127endif 128 129$(if $(word 2, $(KBUILD_EXTMOD)), \ 130 $(error building multiple external modules is not supported)) 131 132export KBUILD_EXTMOD 133 134# Kbuild will save output files in the current working directory. 135# This does not need to match to the root of the kernel source tree. 136# 137# For example, you can do this: 138# 139# cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile 140# 141# If you want to save output files in a different location, there are 142# two syntaxes to specify it. 143# 144# 1) O= 145# Use "make O=dir/to/store/output/files/" 146# 147# 2) Set KBUILD_OUTPUT 148# Set the environment variable KBUILD_OUTPUT to point to the output directory. 149# export KBUILD_OUTPUT=dir/to/store/output/files/; make 150# 151# The O= assignment takes precedence over the KBUILD_OUTPUT environment 152# variable. 153 154# Do we want to change the working directory? 155ifeq ("$(origin O)", "command line") 156 KBUILD_OUTPUT := $(O) 157endif 158 159ifneq ($(KBUILD_OUTPUT),) 160# Make's built-in functions such as $(abspath ...), $(realpath ...) cannot 161# expand a shell special character '~'. We use a somewhat tedious way here. 162abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) 163$(if $(abs_objtree),, \ 164 $(error failed to create output directory "$(KBUILD_OUTPUT)")) 165 166# $(realpath ...) resolves symlinks 167abs_objtree := $(realpath $(abs_objtree)) 168else 169abs_objtree := $(CURDIR) 170endif # ifneq ($(KBUILD_OUTPUT),) 171 172ifeq ($(abs_objtree),$(CURDIR)) 173# Suppress "Entering directory ..." unless we are changing the work directory. 174MAKEFLAGS += --no-print-directory 175else 176need-sub-make := 1 177endif 178 179this-makefile := $(lastword $(MAKEFILE_LIST)) 180abs_srctree := $(realpath $(dir $(this-makefile))) 181 182ifneq ($(words $(subst :, ,$(abs_srctree))), 1) 183$(error source directory cannot contain spaces or colons) 184endif 185 186ifneq ($(abs_srctree),$(abs_objtree)) 187# Look for make include files relative to root of kernel src 188# 189# This does not become effective immediately because MAKEFLAGS is re-parsed 190# once after the Makefile is read. We need to invoke sub-make. 191MAKEFLAGS += --include-dir=$(abs_srctree) 192need-sub-make := 1 193endif 194 195ifneq ($(filter 3.%,$(MAKE_VERSION)),) 196# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x 197# We need to invoke sub-make to avoid implicit rules in the top Makefile. 198need-sub-make := 1 199# Cancel implicit rules for this Makefile. 200$(this-makefile): ; 201endif 202 203export abs_srctree abs_objtree 204export sub_make_done := 1 205 206ifeq ($(need-sub-make),1) 207 208PHONY += $(MAKECMDGOALS) __sub-make 209 210$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make 211 @: 212 213# Invoke a second make in the output directory, passing relevant variables 214__sub-make: 215 $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS) 216 217endif # need-sub-make 218endif # sub_make_done 219 220# We process the rest of the Makefile if this is the final invocation of make 221ifeq ($(need-sub-make),) 222 223# Do not print "Entering directory ...", 224# but we want to display it when entering to the output directory 225# so that IDEs/editors are able to understand relative filenames. 226MAKEFLAGS += --no-print-directory 227 228ifeq ($(abs_srctree),$(abs_objtree)) 229 # building in the source tree 230 srctree := . 231 building_out_of_srctree := 232else 233 ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) 234 # building in a subdirectory of the source tree 235 srctree := .. 236 else 237 srctree := $(abs_srctree) 238 endif 239 building_out_of_srctree := 1 240endif 241 242ifneq ($(KBUILD_ABS_SRCTREE),) 243srctree := $(abs_srctree) 244endif 245 246objtree := . 247VPATH := $(srctree) 248 249export building_out_of_srctree srctree objtree VPATH 250 251# To make sure we do not include .config for any of the *config targets 252# catch them early, and hand them over to scripts/kconfig/Makefile 253# It is allowed to specify more targets when calling make, including 254# mixing *config targets and build targets. 255# For example 'make oldconfig all'. 256# Detect when mixed targets is specified, and make a second invocation 257# of make so .config is not included in this case either (for *config). 258 259version_h := include/generated/uapi/linux/version.h 260 261clean-targets := %clean mrproper cleandocs 262no-dot-config-targets := $(clean-targets) \ 263 cscope gtags TAGS tags help% %docs check% coccicheck \ 264 $(version_h) headers headers_% archheaders archscripts \ 265 %asm-generic kernelversion %src-pkg dt_binding_check \ 266 outputmakefile 267no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \ 268 image_name 269single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/ 270 271config-build := 272mixed-build := 273need-config := 1 274may-sync-config := 1 275single-build := 276 277ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 278 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 279 need-config := 280 endif 281endif 282 283ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) 284 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) 285 may-sync-config := 286 endif 287endif 288 289ifneq ($(KBUILD_EXTMOD),) 290 may-sync-config := 291endif 292 293ifeq ($(KBUILD_EXTMOD),) 294 ifneq ($(filter %config,$(MAKECMDGOALS)),) 295 config-build := 1 296 ifneq ($(words $(MAKECMDGOALS)),1) 297 mixed-build := 1 298 endif 299 endif 300endif 301 302# We cannot build single targets and the others at the same time 303ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) 304 single-build := 1 305 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) 306 mixed-build := 1 307 endif 308endif 309 310# For "make -j clean all", "make -j mrproper defconfig all", etc. 311ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) 312 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) 313 mixed-build := 1 314 endif 315endif 316 317# install and modules_install need also be processed one by one 318ifneq ($(filter install,$(MAKECMDGOALS)),) 319 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 320 mixed-build := 1 321 endif 322endif 323 324ifdef mixed-build 325# =========================================================================== 326# We're called with mixed targets (*config and build targets). 327# Handle them one by one. 328 329PHONY += $(MAKECMDGOALS) __build_one_by_one 330 331$(MAKECMDGOALS): __build_one_by_one 332 @: 333 334__build_one_by_one: 335 $(Q)set -e; \ 336 for i in $(MAKECMDGOALS); do \ 337 $(MAKE) -f $(srctree)/Makefile $$i; \ 338 done 339 340else # !mixed-build 341 342include scripts/Kbuild.include 343 344# Read KERNELRELEASE from include/config/kernel.release (if it exists) 345KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) 346KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 347export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 348 349include scripts/subarch.include 350 351# Cross compiling and selecting different set of gcc/bin-utils 352# --------------------------------------------------------------------------- 353# 354# When performing cross compilation for other architectures ARCH shall be set 355# to the target architecture. (See arch/* for the possibilities). 356# ARCH can be set during invocation of make: 357# make ARCH=ia64 358# Another way is to have ARCH set in the environment. 359# The default ARCH is the host where make is executed. 360 361# CROSS_COMPILE specify the prefix used for all executables used 362# during compilation. Only gcc and related bin-utils executables 363# are prefixed with $(CROSS_COMPILE). 364# CROSS_COMPILE can be set on the command line 365# make CROSS_COMPILE=ia64-linux- 366# Alternatively CROSS_COMPILE can be set in the environment. 367# Default value for CROSS_COMPILE is not to prefix executables 368# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 369ARCH ?= $(SUBARCH) 370 371# Architecture as present in compile.h 372UTS_MACHINE := $(ARCH) 373SRCARCH := $(ARCH) 374 375# Additional ARCH settings for x86 376ifeq ($(ARCH),i386) 377 SRCARCH := x86 378endif 379ifeq ($(ARCH),x86_64) 380 SRCARCH := x86 381endif 382 383# Additional ARCH settings for sparc 384ifeq ($(ARCH),sparc32) 385 SRCARCH := sparc 386endif 387ifeq ($(ARCH),sparc64) 388 SRCARCH := sparc 389endif 390 391# Additional ARCH settings for sh 392ifeq ($(ARCH),sh64) 393 SRCARCH := sh 394endif 395 396KCONFIG_CONFIG ?= .config 397export KCONFIG_CONFIG 398 399# Default file for 'make defconfig'. This may be overridden by arch-Makefile. 400export KBUILD_DEFCONFIG := defconfig 401 402# SHELL used by kbuild 403CONFIG_SHELL := sh 404 405HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) 406HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) 407HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) 408 409ifneq ($(LLVM),) 410HOSTCC = clang 411HOSTCXX = clang++ 412else 413HOSTCC = gcc 414HOSTCXX = g++ 415endif 416 417export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ 418 -O2 -fomit-frame-pointer -std=gnu89 419export KBUILD_USERLDFLAGS := 420 421KBUILD_HOSTCFLAGS := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS) 422KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) 423KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) 424KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) 425 426# Make variables (CC, etc...) 427CPP = $(CC) -E 428ifneq ($(LLVM),) 429CC = clang 430LD = ld.lld 431AR = llvm-ar 432NM = llvm-nm 433OBJCOPY = llvm-objcopy 434OBJDUMP = llvm-objdump 435READELF = llvm-readelf 436STRIP = llvm-strip 437else 438CC = $(CROSS_COMPILE)gcc 439LD = $(CROSS_COMPILE)ld 440AR = $(CROSS_COMPILE)ar 441NM = $(CROSS_COMPILE)nm 442OBJCOPY = $(CROSS_COMPILE)objcopy 443OBJDUMP = $(CROSS_COMPILE)objdump 444READELF = $(CROSS_COMPILE)readelf 445STRIP = $(CROSS_COMPILE)strip 446endif 447PAHOLE = pahole 448RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids 449LEX = flex 450YACC = bison 451AWK = awk 452INSTALLKERNEL := installkernel 453DEPMOD = depmod 454PERL = perl 455PYTHON3 = python3 456CHECK = sparse 457BASH = bash 458KGZIP = gzip 459KBZIP2 = bzip2 460KLZOP = lzop 461LZMA = lzma 462LZ4 = lz4c 463XZ = xz 464ZSTD = zstd 465 466CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 467 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) 468NOSTDINC_FLAGS := 469CFLAGS_MODULE = 470AFLAGS_MODULE = 471LDFLAGS_MODULE = 472CFLAGS_KERNEL = 473AFLAGS_KERNEL = 474LDFLAGS_vmlinux = 475 476# Use USERINCLUDE when you must reference the UAPI directories only. 477USERINCLUDE := \ 478 -I$(srctree)/arch/$(SRCARCH)/include/uapi \ 479 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ 480 -I$(srctree)/include/uapi \ 481 -I$(objtree)/include/generated/uapi \ 482 -include $(srctree)/include/linux/compiler-version.h \ 483 -include $(srctree)/include/linux/kconfig.h 484 485# Use LINUXINCLUDE when you must reference the include/ directory. 486# Needed to be compatible with the O= option 487LINUXINCLUDE := \ 488 -I$(srctree)/arch/$(SRCARCH)/include \ 489 -I$(objtree)/arch/$(SRCARCH)/include/generated \ 490 $(if $(building_out_of_srctree),-I$(srctree)/include) \ 491 -I$(objtree)/include \ 492 $(USERINCLUDE) 493 494KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE 495KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ 496 -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \ 497 -Werror=implicit-function-declaration -Werror=implicit-int \ 498 -Werror=return-type -Wno-format-security \ 499 -std=gnu89 500KBUILD_CPPFLAGS := -D__KERNEL__ 501KBUILD_AFLAGS_KERNEL := 502KBUILD_CFLAGS_KERNEL := 503KBUILD_AFLAGS_MODULE := -DMODULE 504KBUILD_CFLAGS_MODULE := -DMODULE 505KBUILD_LDFLAGS_MODULE := 506KBUILD_LDFLAGS := 507CLANG_FLAGS := 508 509export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC 510export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL 511export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX 512export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD 513export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE 514 515export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS 516export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 517export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 518export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE 519export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL 520 521# Files to ignore in find ... statements 522 523export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 524 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 525 -prune -o 526export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 527 --exclude CVS --exclude .pc --exclude .hg --exclude .git 528 529# =========================================================================== 530# Rules shared between *config targets and build targets 531 532# Basic helpers built in scripts/basic/ 533PHONY += scripts_basic 534scripts_basic: 535 $(Q)$(MAKE) $(build)=scripts/basic 536 $(Q)rm -f .tmp_quiet_recordmcount 537 538PHONY += outputmakefile 539# Before starting out-of-tree build, make sure the source tree is clean. 540# outputmakefile generates a Makefile in the output directory, if using a 541# separate output directory. This allows convenient use of make in the 542# output directory. 543# At the same time when output Makefile generated, generate .gitignore to 544# ignore whole output directory 545outputmakefile: 546ifdef building_out_of_srctree 547 $(Q)if [ -f $(srctree)/.config -o \ 548 -d $(srctree)/include/config -o \ 549 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ 550 echo >&2 "***"; \ 551 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ 552 echo >&2 "*** in $(abs_srctree)";\ 553 echo >&2 "***"; \ 554 false; \ 555 fi 556 $(Q)ln -fsn $(srctree) source 557 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree) 558 $(Q)test -e .gitignore || \ 559 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore 560endif 561 562# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. 563# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. 564# CC_VERSION_TEXT is referenced from Kconfig (so it needs export), 565# and from include/config/auto.conf.cmd to detect the compiler upgrade. 566CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1 | sed 's/\#//g') 567 568ifneq ($(findstring clang,$(CC_VERSION_TEXT)),) 569ifneq ($(CROSS_COMPILE),) 570CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) 571GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit)) 572CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE)) 573GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..) 574endif 575ifneq ($(GCC_TOOLCHAIN),) 576CLANG_FLAGS += --gcc-toolchain=$(GCC_TOOLCHAIN) 577endif 578ifneq ($(LLVM_IAS),1) 579CLANG_FLAGS += -no-integrated-as 580endif 581CLANG_FLAGS += -Werror=unknown-warning-option 582KBUILD_CFLAGS += $(CLANG_FLAGS) 583KBUILD_AFLAGS += $(CLANG_FLAGS) 584export CLANG_FLAGS 585endif 586 587ifdef config-build 588# =========================================================================== 589# *config targets only - make sure prerequisites are updated, and descend 590# in scripts/kconfig to make the *config target 591 592# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 593# KBUILD_DEFCONFIG may point out an alternative default configuration 594# used for 'make defconfig' 595include arch/$(SRCARCH)/Makefile 596export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT 597 598config: outputmakefile scripts_basic FORCE 599 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 600 601%config: outputmakefile scripts_basic FORCE 602 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 603 604else #!config-build 605# =========================================================================== 606# Build targets only - this includes vmlinux, arch specific targets, clean 607# targets and others. In general all targets except *config targets. 608 609# If building an external module we do not care about the all: rule 610# but instead __all depend on modules 611PHONY += all 612ifeq ($(KBUILD_EXTMOD),) 613__all: all 614else 615__all: modules 616endif 617 618# Decide whether to build built-in, modular, or both. 619# Normally, just do built-in. 620 621KBUILD_MODULES := 622KBUILD_BUILTIN := 1 623 624# If we have only "make modules", don't compile built-in objects. 625ifeq ($(MAKECMDGOALS),modules) 626 KBUILD_BUILTIN := 627endif 628 629# If we have "make <whatever> modules", compile modules 630# in addition to whatever we do anyway. 631# Just "make" or "make all" shall build modules as well 632 633ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),) 634 KBUILD_MODULES := 1 635endif 636 637ifeq ($(MAKECMDGOALS),) 638 KBUILD_MODULES := 1 639endif 640 641export KBUILD_MODULES KBUILD_BUILTIN 642 643ifdef need-config 644include include/config/auto.conf 645endif 646 647ifeq ($(KBUILD_EXTMOD),) 648# Objects we will link into vmlinux / subdirs we need to visit 649core-y := init/ usr/ 650drivers-y := drivers/ sound/ 651drivers-$(CONFIG_SAMPLES) += samples/ 652drivers-$(CONFIG_NET) += net/ 653drivers-y += virt/ 654libs-y := lib/ 655endif # KBUILD_EXTMOD 656 657# The all: target is the default when no target is given on the 658# command line. 659# This allow a user to issue only 'make' to build a kernel including modules 660# Defaults to vmlinux, but the arch makefile usually adds further targets 661all: vmlinux 662 663CFLAGS_GCOV := -fprofile-arcs -ftest-coverage \ 664 $(call cc-option,-fno-tree-loop-im) \ 665 $(call cc-disable-warning,maybe-uninitialized,) 666export CFLAGS_GCOV 667 668# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. 669ifdef CONFIG_FUNCTION_TRACER 670 CC_FLAGS_FTRACE := -pg 671endif 672 673RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register 674RETPOLINE_VDSO_CFLAGS_GCC := -mindirect-branch=thunk-inline -mindirect-branch-register 675RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk 676RETPOLINE_VDSO_CFLAGS_CLANG := -mretpoline 677RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG))) 678RETPOLINE_VDSO_CFLAGS := $(call cc-option,$(RETPOLINE_VDSO_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_VDSO_CFLAGS_CLANG))) 679export RETPOLINE_CFLAGS 680export RETPOLINE_VDSO_CFLAGS 681 682include arch/$(SRCARCH)/Makefile 683 684ifdef need-config 685ifdef may-sync-config 686# Read in dependencies to all Kconfig* files, make sure to run syncconfig if 687# changes are detected. This should be included after arch/$(SRCARCH)/Makefile 688# because some architectures define CROSS_COMPILE there. 689include include/config/auto.conf.cmd 690 691$(KCONFIG_CONFIG): 692 @echo >&2 '***' 693 @echo >&2 '*** Configuration file "$@" not found!' 694 @echo >&2 '***' 695 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' 696 @echo >&2 '*** "make menuconfig" or "make xconfig").' 697 @echo >&2 '***' 698 @/bin/false 699 700# The actual configuration files used during the build are stored in 701# include/generated/ and include/config/. Update them if .config is newer than 702# include/config/auto.conf (which mirrors .config). 703# 704# This exploits the 'multi-target pattern rule' trick. 705# The syncconfig should be executed only once to make all the targets. 706# (Note: use the grouped target '&:' when we bump to GNU Make 4.3) 707quiet_cmd_syncconfig = SYNC $@ 708 cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig 709 710%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG) 711 +$(call cmd,syncconfig) 712else # !may-sync-config 713# External modules and some install targets need include/generated/autoconf.h 714# and include/config/auto.conf but do not care if they are up-to-date. 715# Use auto.conf to trigger the test 716PHONY += include/config/auto.conf 717 718include/config/auto.conf: 719 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ 720 echo >&2; \ 721 echo >&2 " ERROR: Kernel configuration is invalid."; \ 722 echo >&2 " include/generated/autoconf.h or $@ are missing.";\ 723 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ 724 echo >&2 ; \ 725 /bin/false) 726 727endif # may-sync-config 728endif # need-config 729 730KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) 731KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) 732KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation) 733KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow) 734KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) 735 736ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE 737KBUILD_CFLAGS += -O2 738else ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 739KBUILD_CFLAGS += -O3 740else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 741KBUILD_CFLAGS += -Os 742endif 743 744# Tell gcc to never replace conditional load with a non-conditional one 745KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) 746KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) 747 748ifdef CONFIG_READABLE_ASM 749# Disable optimizations that make assembler listings hard to read. 750# reorder blocks reorders the control in the function 751# ipa clone creates specialized cloned functions 752# partial inlining inlines only parts of functions 753KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ 754 $(call cc-option,-fno-ipa-cp-clone,) \ 755 $(call cc-option,-fno-partial-inlining) 756endif 757 758ifneq ($(CONFIG_FRAME_WARN),0) 759KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN) 760endif 761 762stackp-flags-y := -fno-stack-protector 763stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector 764stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong 765 766KBUILD_CFLAGS += $(stackp-flags-y) 767 768ifdef CONFIG_CC_IS_CLANG 769KBUILD_CPPFLAGS += -Qunused-arguments 770KBUILD_CFLAGS += -Wno-format-invalid-specifier 771KBUILD_CFLAGS += -Wno-gnu 772# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the 773# source of a reference will be _MergedGlobals and not on of the whitelisted names. 774# See modpost pattern 2 775KBUILD_CFLAGS += -mno-global-merge 776else 777 778# These warnings generated too much noise in a regular build. 779# Use make W=1 to enable them (see scripts/Makefile.extrawarn) 780KBUILD_CFLAGS += -Wno-unused-but-set-variable 781 782# Warn about unmarked fall-throughs in switch statement. 783# Disabled for clang while comment to attribute conversion happens and 784# https://github.com/ClangBuiltLinux/linux/issues/636 is discussed. 785KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,) 786endif 787 788KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) 789ifdef CONFIG_FRAME_POINTER 790KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 791else 792# Some targets (ARM with Thumb2, for example), can't be built with frame 793# pointers. For those, we don't have FUNCTION_TRACER automatically 794# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 795# incompatible with -fomit-frame-pointer with current GCC, so we don't use 796# -fomit-frame-pointer with FUNCTION_TRACER. 797ifndef CONFIG_FUNCTION_TRACER 798KBUILD_CFLAGS += -fomit-frame-pointer 799endif 800endif 801 802# Initialize all stack variables with a 0xAA pattern. 803ifdef CONFIG_INIT_STACK_ALL_PATTERN 804KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern 805endif 806 807# Initialize all stack variables with a zero value. 808ifdef CONFIG_INIT_STACK_ALL_ZERO 809# Future support for zero initialization is still being debated, see 810# https://bugs.llvm.org/show_bug.cgi?id=45497. These flags are subject to being 811# renamed or dropped. 812KBUILD_CFLAGS += -ftrivial-auto-var-init=zero 813KBUILD_CFLAGS += -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang 814endif 815 816# While VLAs have been removed, GCC produces unreachable stack probes 817# for the randomize_kstack_offset feature. Disable it for all compilers. 818KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) 819 820DEBUG_CFLAGS := 821 822# Workaround for GCC versions < 5.0 823# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801 824ifdef CONFIG_CC_IS_GCC 825DEBUG_CFLAGS += $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments)) 826endif 827 828ifdef CONFIG_DEBUG_INFO 829 830ifdef CONFIG_DEBUG_INFO_SPLIT 831DEBUG_CFLAGS += -gsplit-dwarf 832else 833DEBUG_CFLAGS += -g 834endif 835 836ifneq ($(LLVM_IAS),1) 837KBUILD_AFLAGS += -Wa,-gdwarf-2 838endif 839 840ifndef CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT 841dwarf-version-$(CONFIG_DEBUG_INFO_DWARF4) := 4 842dwarf-version-$(CONFIG_DEBUG_INFO_DWARF5) := 5 843DEBUG_CFLAGS += -gdwarf-$(dwarf-version-y) 844endif 845 846ifdef CONFIG_DEBUG_INFO_REDUCED 847DEBUG_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ 848 $(call cc-option,-fno-var-tracking) 849endif 850 851ifdef CONFIG_DEBUG_INFO_COMPRESSED 852DEBUG_CFLAGS += -gz=zlib 853KBUILD_AFLAGS += -gz=zlib 854KBUILD_LDFLAGS += --compress-debug-sections=zlib 855endif 856 857endif # CONFIG_DEBUG_INFO 858 859KBUILD_CFLAGS += $(DEBUG_CFLAGS) 860export DEBUG_CFLAGS 861 862ifdef CONFIG_FUNCTION_TRACER 863ifdef CONFIG_FTRACE_MCOUNT_USE_CC 864 CC_FLAGS_FTRACE += -mrecord-mcount 865 ifdef CONFIG_HAVE_NOP_MCOUNT 866 ifeq ($(call cc-option-yn, -mnop-mcount),y) 867 CC_FLAGS_FTRACE += -mnop-mcount 868 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 869 endif 870 endif 871endif 872ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 873 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 874endif 875ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT 876 ifdef CONFIG_HAVE_C_RECORDMCOUNT 877 BUILD_C_RECORDMCOUNT := y 878 export BUILD_C_RECORDMCOUNT 879 endif 880endif 881ifdef CONFIG_HAVE_FENTRY 882 ifeq ($(call cc-option-yn, -mfentry),y) 883 CC_FLAGS_FTRACE += -mfentry 884 CC_FLAGS_USING += -DCC_USING_FENTRY 885 endif 886endif 887export CC_FLAGS_FTRACE 888KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) 889KBUILD_AFLAGS += $(CC_FLAGS_USING) 890endif 891 892# We trigger additional mismatches with less inlining 893ifdef CONFIG_DEBUG_SECTION_MISMATCH 894KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) 895endif 896 897ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION 898KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections 899LDFLAGS_vmlinux += --gc-sections 900endif 901 902ifdef CONFIG_SHADOW_CALL_STACK 903CC_FLAGS_SCS := -fsanitize=shadow-call-stack 904KBUILD_CFLAGS += $(CC_FLAGS_SCS) 905export CC_FLAGS_SCS 906endif 907 908ifdef CONFIG_LTO_CLANG 909ifdef CONFIG_LTO_CLANG_THIN 910CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit 911KBUILD_LDFLAGS += --thinlto-cache-dir=$(extmod-prefix).thinlto-cache 912else 913CC_FLAGS_LTO := -flto 914endif 915CC_FLAGS_LTO += -fvisibility=hidden 916 917# Limit inlining across translation units to reduce binary size 918KBUILD_LDFLAGS += -mllvm -import-instr-limit=5 919endif 920 921ifdef CONFIG_LTO 922KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO) 923KBUILD_AFLAGS += -fno-lto 924export CC_FLAGS_LTO 925endif 926 927ifdef CONFIG_CFI_CLANG 928CC_FLAGS_CFI := -fsanitize=cfi \ 929 -fsanitize-cfi-cross-dso \ 930 -fno-sanitize-cfi-canonical-jump-tables \ 931 -fno-sanitize-trap=cfi \ 932 -fno-sanitize-blacklist 933 934ifdef CONFIG_CFI_PERMISSIVE 935CC_FLAGS_CFI += -fsanitize-recover=cfi 936endif 937 938# If LTO flags are filtered out, we must also filter out CFI. 939CC_FLAGS_LTO += $(CC_FLAGS_CFI) 940KBUILD_CFLAGS += $(CC_FLAGS_CFI) 941export CC_FLAGS_CFI 942endif 943 944ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B 945KBUILD_CFLAGS += -falign-functions=32 946endif 947 948# arch Makefile may override CC so keep this after arch Makefile is included 949NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 950 951# warn about C99 declaration after statement 952KBUILD_CFLAGS += -Wdeclaration-after-statement 953 954# Variable Length Arrays (VLAs) should not be used anywhere in the kernel 955KBUILD_CFLAGS += -Wvla 956 957# disable pointer signed / unsigned warnings in gcc 4.0 958KBUILD_CFLAGS += -Wno-pointer-sign 959 960# disable stringop warnings in gcc 8+ 961KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation) 962 963# We'll want to enable this eventually, but it's not going away for 5.7 at least 964KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds) 965KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds) 966KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow) 967 968# Another good warning that we'll want to enable eventually 969KBUILD_CFLAGS += $(call cc-disable-warning, restrict) 970 971# Enabled with W=2, disabled by default as noisy 972KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) 973 974# disable invalid "can't wrap" optimizations for signed / pointers 975KBUILD_CFLAGS += -fno-strict-overflow 976 977# Make sure -fstack-check isn't enabled (like gentoo apparently did) 978KBUILD_CFLAGS += -fno-stack-check 979 980# conserve stack if available 981KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) 982 983# Prohibit date/time macros, which would make the build non-deterministic 984KBUILD_CFLAGS += -Werror=date-time 985 986# enforce correct pointer usage 987KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) 988 989# Require designated initializers for all marked structures 990KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init) 991 992# change __FILE__ to the relative path from the srctree 993KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) 994 995# include additional Makefiles when needed 996include-y := scripts/Makefile.extrawarn 997include-$(CONFIG_KASAN) += scripts/Makefile.kasan 998include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan 999include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan 1000include-$(CONFIG_KCOV) += scripts/Makefile.kcov 1001include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins 1002 1003include $(addprefix $(srctree)/, $(include-y)) 1004 1005# scripts/Makefile.gcc-plugins is intentionally included last. 1006# Do not add $(call cc-option,...) below this line. When you build the kernel 1007# from the clean source tree, the GCC plugins do not exist at this point. 1008 1009# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 1010KBUILD_CPPFLAGS += $(KCPPFLAGS) 1011KBUILD_AFLAGS += $(KAFLAGS) 1012KBUILD_CFLAGS += $(KCFLAGS) 1013 1014KBUILD_LDFLAGS_MODULE += --build-id=sha1 1015LDFLAGS_vmlinux += --build-id=sha1 1016 1017ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 1018LDFLAGS_vmlinux += $(call ld-option, -X,) 1019endif 1020 1021ifeq ($(CONFIG_RELR),y) 1022LDFLAGS_vmlinux += --pack-dyn-relocs=relr 1023endif 1024 1025# We never want expected sections to be placed heuristically by the 1026# linker. All sections should be explicitly named in the linker script. 1027ifdef CONFIG_LD_ORPHAN_WARN 1028LDFLAGS_vmlinux += --orphan-handling=warn 1029endif 1030 1031# Align the bit size of userspace programs with the kernel 1032KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1033KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1034 1035# make the checker run with the right architecture 1036CHECKFLAGS += --arch=$(ARCH) 1037 1038# insure the checker run with the right endianness 1039CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) 1040 1041# the checker needs the correct machine size 1042CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) 1043 1044# Default kernel image to build when no specific target is given. 1045# KBUILD_IMAGE may be overruled on the command line or 1046# set in the environment 1047# Also any assignments in arch/$(ARCH)/Makefile take precedence over 1048# this default value 1049export KBUILD_IMAGE ?= vmlinux 1050 1051# 1052# INSTALL_PATH specifies where to place the updated kernel and system map 1053# images. Default is /boot, but you can set it to other values 1054export INSTALL_PATH ?= /boot 1055 1056# 1057# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 1058# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 1059# an argument if needed. Otherwise it defaults to the kernel install path 1060# 1061export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 1062 1063# 1064# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 1065# relocations required by build roots. This is not defined in the 1066# makefile but the argument can be passed to make if needed. 1067# 1068 1069MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 1070export MODLIB 1071 1072# 1073# INSTALL_MOD_STRIP, if defined, will cause modules to be 1074# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then 1075# the default option --strip-debug will be used. Otherwise, 1076# INSTALL_MOD_STRIP value will be used as the options to the strip command. 1077 1078ifdef INSTALL_MOD_STRIP 1079ifeq ($(INSTALL_MOD_STRIP),1) 1080mod_strip_cmd = $(STRIP) --strip-debug 1081else 1082mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) 1083endif # INSTALL_MOD_STRIP=1 1084else 1085mod_strip_cmd = true 1086endif # INSTALL_MOD_STRIP 1087export mod_strip_cmd 1088 1089# CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed 1090# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP 1091# or CONFIG_MODULE_COMPRESS_XZ. 1092 1093mod_compress_cmd = true 1094ifdef CONFIG_MODULE_COMPRESS 1095 ifdef CONFIG_MODULE_COMPRESS_GZIP 1096 mod_compress_cmd = $(KGZIP) -n -f 1097 endif # CONFIG_MODULE_COMPRESS_GZIP 1098 ifdef CONFIG_MODULE_COMPRESS_XZ 1099 mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f 1100 endif # CONFIG_MODULE_COMPRESS_XZ 1101endif # CONFIG_MODULE_COMPRESS 1102export mod_compress_cmd 1103 1104ifdef CONFIG_MODULE_SIG_ALL 1105$(eval $(call config_filename,MODULE_SIG_KEY)) 1106 1107mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509 1108else 1109mod_sign_cmd = true 1110endif 1111export mod_sign_cmd 1112 1113HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf) 1114 1115has_libelf = $(call try-run,\ 1116 echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0) 1117 1118ifdef CONFIG_STACK_VALIDATION 1119 ifeq ($(has_libelf),1) 1120 objtool_target := tools/objtool FORCE 1121 else 1122 SKIP_STACK_VALIDATION := 1 1123 export SKIP_STACK_VALIDATION 1124 endif 1125endif 1126 1127PHONY += resolve_btfids_clean 1128 1129resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids 1130 1131# tools/bpf/resolve_btfids directory might not exist 1132# in output directory, skip its clean in that case 1133resolve_btfids_clean: 1134ifneq ($(wildcard $(resolve_btfids_O)),) 1135 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean 1136endif 1137 1138ifdef CONFIG_BPF 1139ifdef CONFIG_DEBUG_INFO_BTF 1140 ifeq ($(has_libelf),1) 1141 resolve_btfids_target := tools/bpf/resolve_btfids FORCE 1142 else 1143 ERROR_RESOLVE_BTFIDS := 1 1144 endif 1145endif # CONFIG_DEBUG_INFO_BTF 1146endif # CONFIG_BPF 1147 1148PHONY += prepare0 1149 1150extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/) 1151export MODORDER := $(extmod-prefix)modules.order 1152export MODULES_NSDEPS := $(extmod-prefix)modules.nsdeps 1153 1154ifeq ($(KBUILD_EXTMOD),) 1155core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ 1156 1157vmlinux-dirs := $(patsubst %/,%,$(filter %/, \ 1158 $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ 1159 $(libs-y) $(libs-m))) 1160 1161vmlinux-alldirs := $(sort $(vmlinux-dirs) Documentation \ 1162 $(patsubst %/,%,$(filter %/, $(core-) \ 1163 $(drivers-) $(libs-)))) 1164 1165subdir-modorder := $(addsuffix modules.order,$(filter %/, \ 1166 $(core-y) $(core-m) $(libs-y) $(libs-m) \ 1167 $(drivers-y) $(drivers-m))) 1168 1169build-dirs := $(vmlinux-dirs) 1170clean-dirs := $(vmlinux-alldirs) 1171 1172# Externally visible symbols (used by link-vmlinux.sh) 1173KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y)) 1174KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y))) 1175ifdef CONFIG_MODULES 1176KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) 1177KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) 1178else 1179KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y)) 1180endif 1181KBUILD_VMLINUX_OBJS += $(patsubst %/,%/built-in.a, $(drivers-y)) 1182 1183export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS 1184export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 1185# used by scripts/Makefile.package 1186export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools) 1187 1188vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS) 1189 1190# Recurse until adjust_autoksyms.sh is satisfied 1191PHONY += autoksyms_recursive 1192ifdef CONFIG_TRIM_UNUSED_KSYMS 1193# For the kernel to actually contain only the needed exported symbols, 1194# we have to build modules as well to determine what those symbols are. 1195# (this can be evaluated only once include/config/auto.conf has been included) 1196KBUILD_MODULES := 1 1197 1198autoksyms_recursive: descend modules.order 1199 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ 1200 "$(MAKE) -f $(srctree)/Makefile vmlinux" 1201endif 1202 1203autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) 1204 1205quiet_cmd_autoksyms_h = GEN $@ 1206 cmd_autoksyms_h = mkdir -p $(dir $@); \ 1207 $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@ 1208 1209$(autoksyms_h): 1210 $(call cmd,autoksyms_h) 1211 1212ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink) 1213 1214# Final link of vmlinux with optional arch pass after final link 1215cmd_link-vmlinux = \ 1216 $(CONFIG_SHELL) $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \ 1217 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) 1218 1219vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE 1220 +$(call if_changed,link-vmlinux) 1221 1222targets := vmlinux 1223 1224# The actual objects are generated when descending, 1225# make sure no implicit rule kicks in 1226$(sort $(vmlinux-deps) $(subdir-modorder)): descend ; 1227 1228filechk_kernel.release = \ 1229 echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1230 1231# Store (new) KERNELRELEASE string in include/config/kernel.release 1232include/config/kernel.release: FORCE 1233 $(call filechk,kernel.release) 1234 1235# Additional helpers built in scripts/ 1236# Carefully list dependencies so we do not try to build scripts twice 1237# in parallel 1238PHONY += scripts 1239scripts: scripts_basic scripts_dtc 1240 $(Q)$(MAKE) $(build)=$(@) 1241 1242# Things we need to do before we recursively start building the kernel 1243# or the modules are listed in "prepare". 1244# A multi level approach is used. prepareN is processed before prepareN-1. 1245# archprepare is used in arch Makefiles and when processed asm symlink, 1246# version.h and scripts_basic is processed / created. 1247 1248PHONY += prepare archprepare 1249 1250archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ 1251 asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \ 1252 include/generated/autoconf.h 1253 1254prepare0: archprepare 1255 $(Q)$(MAKE) $(build)=scripts/mod 1256 $(Q)$(MAKE) $(build)=. 1257 1258# All the preparing.. 1259prepare: prepare0 prepare-objtool prepare-resolve_btfids 1260 1261# Support for using generic headers in asm-generic 1262asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj 1263 1264PHONY += asm-generic uapi-asm-generic 1265asm-generic: uapi-asm-generic 1266 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ 1267 generic=include/asm-generic 1268uapi-asm-generic: 1269 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ 1270 generic=include/uapi/asm-generic 1271 1272PHONY += prepare-objtool prepare-resolve_btfids 1273prepare-objtool: $(objtool_target) 1274ifeq ($(SKIP_STACK_VALIDATION),1) 1275ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 1276 @echo "error: Cannot generate __mcount_loc for CONFIG_DYNAMIC_FTRACE=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 1277 @false 1278endif 1279ifdef CONFIG_UNWINDER_ORC 1280 @echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 1281 @false 1282else 1283 @echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 1284endif 1285endif 1286 1287prepare-resolve_btfids: $(resolve_btfids_target) 1288ifeq ($(ERROR_RESOLVE_BTFIDS),1) 1289 @echo "error: Cannot resolve BTF IDs for CONFIG_DEBUG_INFO_BTF, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2 1290 @false 1291endif 1292# Generate some files 1293# --------------------------------------------------------------------------- 1294 1295# KERNELRELEASE can change from a few different places, meaning version.h 1296# needs to be updated, so this check is forced on all builds 1297 1298uts_len := 64 1299define filechk_utsrelease.h 1300 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1301 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1302 exit 1; \ 1303 fi; \ 1304 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" 1305endef 1306 1307define filechk_version.h 1308 if [ $(SUBLEVEL) -gt 255 ]; then \ 1309 echo \#define LINUX_VERSION_CODE $(shell \ 1310 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \ 1311 else \ 1312 echo \#define LINUX_VERSION_CODE $(shell \ 1313 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ 1314 fi; \ 1315 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \ 1316 ((c) > 255 ? 255 : (c)))'; \ 1317 echo \#define LINUX_VERSION_MAJOR $(VERSION); \ 1318 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ 1319 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) 1320endef 1321 1322$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0) 1323$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0) 1324$(version_h): FORCE 1325 $(call filechk,version.h) 1326 1327include/generated/utsrelease.h: include/config/kernel.release FORCE 1328 $(call filechk,utsrelease.h) 1329 1330PHONY += headerdep 1331headerdep: 1332 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1333 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1334 1335# --------------------------------------------------------------------------- 1336# Kernel headers 1337 1338#Default location for installed headers 1339export INSTALL_HDR_PATH = $(objtree)/usr 1340 1341quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include 1342 cmd_headers_install = \ 1343 mkdir -p $(INSTALL_HDR_PATH); \ 1344 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ 1345 usr/include $(INSTALL_HDR_PATH) 1346 1347PHONY += headers_install 1348headers_install: headers 1349 $(call cmd,headers_install) 1350 1351PHONY += archheaders archscripts 1352 1353hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 1354 1355PHONY += headers 1356headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts 1357 $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \ 1358 $(error Headers not exportable for the $(SRCARCH) architecture)) 1359 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1360 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi 1361 1362# Deprecated. It is no-op now. 1363PHONY += headers_check 1364headers_check: 1365 @: 1366 1367ifdef CONFIG_HEADERS_INSTALL 1368prepare: headers 1369endif 1370 1371PHONY += scripts_unifdef 1372scripts_unifdef: scripts_basic 1373 $(Q)$(MAKE) $(build)=scripts scripts/unifdef 1374 1375# --------------------------------------------------------------------------- 1376# Kernel selftest 1377 1378PHONY += kselftest 1379kselftest: 1380 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests 1381 1382kselftest-%: FORCE 1383 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* 1384 1385PHONY += kselftest-merge 1386kselftest-merge: 1387 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) 1388 $(Q)find $(srctree)/tools/testing/selftests -name config | \ 1389 xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config 1390 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig 1391 1392# --------------------------------------------------------------------------- 1393# Devicetree files 1394 1395ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) 1396dtstree := arch/$(SRCARCH)/boot/dts 1397endif 1398 1399ifneq ($(dtstree),) 1400 1401%.dtb: include/config/kernel.release scripts_dtc 1402 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1403 1404%.dtbo: include/config/kernel.release scripts_dtc 1405 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1406 1407PHONY += dtbs dtbs_install dtbs_check 1408dtbs: include/config/kernel.release scripts_dtc 1409 $(Q)$(MAKE) $(build)=$(dtstree) 1410 1411ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) 1412export CHECK_DTBS=y 1413dtbs: dt_binding_check 1414endif 1415 1416dtbs_check: dtbs 1417 1418dtbs_install: 1419 $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) 1420 1421ifdef CONFIG_OF_EARLY_FLATTREE 1422all: dtbs 1423endif 1424 1425endif 1426 1427PHONY += scripts_dtc 1428scripts_dtc: scripts_basic 1429 $(Q)$(MAKE) $(build)=scripts/dtc 1430 1431ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) 1432export CHECK_DT_BINDING=y 1433endif 1434 1435PHONY += dt_binding_check 1436dt_binding_check: scripts_dtc 1437 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings 1438 1439# --------------------------------------------------------------------------- 1440# Modules 1441 1442ifdef CONFIG_MODULES 1443 1444# By default, build modules as well 1445 1446all: modules 1447 1448# When we're building modules with modversions, we need to consider 1449# the built-in objects during the descend as well, in order to 1450# make sure the checksums are up to date before we record them. 1451ifdef CONFIG_MODVERSIONS 1452 KBUILD_BUILTIN := 1 1453endif 1454 1455# Build modules 1456# 1457# A module can be listed more than once in obj-m resulting in 1458# duplicate lines in modules.order files. Those are removed 1459# using awk while concatenating to the final file. 1460 1461PHONY += modules 1462modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_check modules_prepare 1463 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1464 1465PHONY += modules_check 1466modules_check: modules.order 1467 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< 1468 1469cmd_modules_order = $(AWK) '!x[$$0]++' $(real-prereqs) > $@ 1470 1471modules.order: $(subdir-modorder) FORCE 1472 $(call if_changed,modules_order) 1473 1474targets += modules.order 1475 1476# Target to prepare building external modules 1477PHONY += modules_prepare 1478modules_prepare: prepare 1479 $(Q)$(MAKE) $(build)=scripts scripts/module.lds 1480 1481# Target to install modules 1482PHONY += modules_install 1483modules_install: _modinst_ _modinst_post 1484 1485PHONY += _modinst_ 1486_modinst_: 1487 @rm -rf $(MODLIB)/kernel 1488 @rm -f $(MODLIB)/source 1489 @mkdir -p $(MODLIB)/kernel 1490 @ln -s $(abspath $(srctree)) $(MODLIB)/source 1491 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ 1492 rm -f $(MODLIB)/build ; \ 1493 ln -s $(CURDIR) $(MODLIB)/build ; \ 1494 fi 1495 @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order 1496 @cp -f modules.builtin $(MODLIB)/ 1497 @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/ 1498 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1499 1500# This depmod is only for convenience to give the initial 1501# boot a modules.dep even before / is mounted read-write. However the 1502# boot script depmod is the master version. 1503PHONY += _modinst_post 1504_modinst_post: _modinst_ 1505 $(call cmd,depmod) 1506 1507ifeq ($(CONFIG_MODULE_SIG), y) 1508PHONY += modules_sign 1509modules_sign: 1510 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign 1511endif 1512 1513else # CONFIG_MODULES 1514 1515# Modules not configured 1516# --------------------------------------------------------------------------- 1517 1518PHONY += modules modules_install 1519modules modules_install: 1520 @echo >&2 1521 @echo >&2 "The present kernel configuration has modules disabled." 1522 @echo >&2 "Type 'make config' and enable loadable module support." 1523 @echo >&2 "Then build a kernel with module support enabled." 1524 @echo >&2 1525 @exit 1 1526 1527endif # CONFIG_MODULES 1528 1529### 1530# Cleaning is done on three levels. 1531# make clean Delete most generated files 1532# Leave enough to build external modules 1533# make mrproper Delete the current configuration, and all generated files 1534# make distclean Remove editor backup files, patch leftover files and the like 1535 1536# Directories & files removed with 'make clean' 1537CLEAN_FILES += include/ksym vmlinux.symvers \ 1538 modules.builtin modules.builtin.modinfo modules.nsdeps \ 1539 compile_commands.json .thinlto-cache 1540 1541# Directories & files removed with 'make mrproper' 1542MRPROPER_FILES += include/config include/generated \ 1543 arch/$(SRCARCH)/include/generated .tmp_objdiff \ 1544 debian snap tar-install \ 1545 .config .config.old .version \ 1546 Module.symvers \ 1547 signing_key.pem signing_key.priv signing_key.x509 \ 1548 x509.genkey extra_certificates signing_key.x509.keyid \ 1549 signing_key.x509.signer vmlinux-gdb.py \ 1550 *.spec 1551 1552# Directories & files removed with 'make distclean' 1553DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1554 1555# clean - Delete most, but leave enough to build external modules 1556# 1557clean: rm-files := $(CLEAN_FILES) 1558 1559PHONY += archclean vmlinuxclean 1560 1561vmlinuxclean: 1562 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1563 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) 1564 1565clean: archclean vmlinuxclean resolve_btfids_clean 1566 1567# mrproper - Delete all generated files, including .config 1568# 1569mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1570mrproper-dirs := $(addprefix _mrproper_,scripts) 1571 1572PHONY += $(mrproper-dirs) mrproper 1573$(mrproper-dirs): 1574 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1575 1576mrproper: clean $(mrproper-dirs) 1577 $(call cmd,rmfiles) 1578 1579# distclean 1580# 1581distclean: rm-files := $(wildcard $(DISTCLEAN_FILES)) 1582 1583PHONY += distclean 1584 1585distclean: mrproper 1586 $(call cmd,rmfiles) 1587 @find $(srctree) $(RCS_FIND_IGNORE) \ 1588 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1589 -o -name '*.bak' -o -name '#*#' -o -name '*%' \ 1590 -o -name 'core' \) \ 1591 -type f -print | xargs rm -f 1592 1593 1594# Packaging of the kernel to various formats 1595# --------------------------------------------------------------------------- 1596 1597%src-pkg: FORCE 1598 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1599%pkg: include/config/kernel.release FORCE 1600 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1601 1602# Brief documentation of the typical targets used 1603# --------------------------------------------------------------------------- 1604 1605boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1606boards := $(sort $(notdir $(boards))) 1607board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1608board-dirs := $(sort $(notdir $(board-dirs:/=))) 1609 1610PHONY += help 1611help: 1612 @echo 'Cleaning targets:' 1613 @echo ' clean - Remove most generated files but keep the config and' 1614 @echo ' enough build support to build external modules' 1615 @echo ' mrproper - Remove all generated files + config + various backup files' 1616 @echo ' distclean - mrproper + remove editor backup and patch files' 1617 @echo '' 1618 @echo 'Configuration targets:' 1619 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1620 @echo '' 1621 @echo 'Other generic targets:' 1622 @echo ' all - Build all targets marked with [*]' 1623 @echo '* vmlinux - Build the bare kernel' 1624 @echo '* modules - Build all modules' 1625 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1626 @echo ' dir/ - Build all files in dir and below' 1627 @echo ' dir/file.[ois] - Build specified target only' 1628 @echo ' dir/file.ll - Build the LLVM assembly file' 1629 @echo ' (requires compiler support for LLVM assembly generation)' 1630 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1631 @echo ' (requires a recent binutils and recent build (System.map))' 1632 @echo ' dir/file.ko - Build module including final link' 1633 @echo ' modules_prepare - Set up for building external modules' 1634 @echo ' tags/TAGS - Generate tags file for editors' 1635 @echo ' cscope - Generate cscope index' 1636 @echo ' gtags - Generate GNU GLOBAL index' 1637 @echo ' kernelrelease - Output the release version string (use with make -s)' 1638 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1639 @echo ' image_name - Output the image name (use with make -s)' 1640 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ 1641 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1642 echo '' 1643 @echo 'Static analysers:' 1644 @echo ' checkstack - Generate a list of stack hogs' 1645 @echo ' versioncheck - Sanity check on version.h usage' 1646 @echo ' includecheck - Check for duplicate included header files' 1647 @echo ' export_report - List the usages of all exported symbols' 1648 @echo ' headerdep - Detect inclusion cycles in headers' 1649 @echo ' coccicheck - Check with Coccinelle' 1650 @echo ' clang-analyzer - Check with clang static analyzer' 1651 @echo ' clang-tidy - Check with clang-tidy' 1652 @echo '' 1653 @echo 'Tools:' 1654 @echo ' nsdeps - Generate missing symbol namespace dependencies' 1655 @echo '' 1656 @echo 'Kernel selftest:' 1657 @echo ' kselftest - Build and run kernel selftest' 1658 @echo ' Build, install, and boot kernel before' 1659 @echo ' running kselftest on it' 1660 @echo ' Run as root for full coverage' 1661 @echo ' kselftest-all - Build kernel selftest' 1662 @echo ' kselftest-install - Build and install kernel selftest' 1663 @echo ' kselftest-clean - Remove all generated kselftest files' 1664 @echo ' kselftest-merge - Merge all the config dependencies of' 1665 @echo ' kselftest to existing .config.' 1666 @echo '' 1667 @$(if $(dtstree), \ 1668 echo 'Devicetree:'; \ 1669 echo '* dtbs - Build device tree blobs for enabled boards'; \ 1670 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ 1671 echo ' dt_binding_check - Validate device tree binding documents'; \ 1672 echo ' dtbs_check - Validate device tree source files';\ 1673 echo '') 1674 1675 @echo 'Userspace tools targets:' 1676 @echo ' use "make tools/help"' 1677 @echo ' or "cd tools; make help"' 1678 @echo '' 1679 @echo 'Kernel packaging:' 1680 @$(MAKE) -f $(srctree)/scripts/Makefile.package help 1681 @echo '' 1682 @echo 'Documentation targets:' 1683 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp 1684 @echo '' 1685 @echo 'Architecture specific targets ($(SRCARCH)):' 1686 @$(if $(archhelp),$(archhelp),\ 1687 echo ' No architecture specific help defined for $(SRCARCH)') 1688 @echo '' 1689 @$(if $(boards), \ 1690 $(foreach b, $(boards), \ 1691 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1692 echo '') 1693 @$(if $(board-dirs), \ 1694 $(foreach b, $(board-dirs), \ 1695 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1696 printf " %-16s - Show all of the above\\n" help-boards; \ 1697 echo '') 1698 1699 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1700 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1701 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1702 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' 1703 @echo ' (sparse by default)' 1704 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1705 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1706 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where' 1707 @echo ' 1: warnings which may be relevant and do not occur too often' 1708 @echo ' 2: warnings which occur quite often but may still be relevant' 1709 @echo ' 3: more obscure warnings, can most likely be ignored' 1710 @echo ' Multiple levels can be combined with W=12 or W=123' 1711 @echo '' 1712 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1713 @echo 'For further info see the ./README file' 1714 1715 1716help-board-dirs := $(addprefix help-,$(board-dirs)) 1717 1718help-boards: $(help-board-dirs) 1719 1720boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 1721 1722$(help-board-dirs): help-%: 1723 @echo 'Architecture specific targets ($(SRCARCH) $*):' 1724 @$(if $(boards-per-dir), \ 1725 $(foreach b, $(boards-per-dir), \ 1726 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 1727 echo '') 1728 1729 1730# Documentation targets 1731# --------------------------------------------------------------------------- 1732DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ 1733 linkcheckdocs dochelp refcheckdocs 1734PHONY += $(DOC_TARGETS) 1735$(DOC_TARGETS): 1736 $(Q)$(MAKE) $(build)=Documentation $@ 1737 1738# Misc 1739# --------------------------------------------------------------------------- 1740 1741PHONY += scripts_gdb 1742scripts_gdb: prepare0 1743 $(Q)$(MAKE) $(build)=scripts/gdb 1744 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) 1745 1746ifdef CONFIG_GDB_SCRIPTS 1747all: scripts_gdb 1748endif 1749 1750else # KBUILD_EXTMOD 1751 1752### 1753# External module support. 1754# When building external modules the kernel used as basis is considered 1755# read-only, and no consistency checks are made and the make 1756# system is not used on the basis kernel. If updates are required 1757# in the basis kernel ordinary make commands (without M=...) must 1758# be used. 1759# 1760# The following are the only valid targets when building external 1761# modules. 1762# make M=dir clean Delete all automatically generated files 1763# make M=dir modules Make all modules in specified dir 1764# make M=dir Same as 'make M=dir modules' 1765# make M=dir modules_install 1766# Install the modules built in the module directory 1767# Assumes install directory is already created 1768 1769# We are always building only modules. 1770KBUILD_BUILTIN := 1771KBUILD_MODULES := 1 1772 1773build-dirs := $(KBUILD_EXTMOD) 1774PHONY += modules 1775modules: $(MODORDER) 1776 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1777 1778$(MODORDER): descend 1779 @: 1780 1781PHONY += modules_install 1782modules_install: _emodinst_ _emodinst_post 1783 1784install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) 1785PHONY += _emodinst_ 1786_emodinst_: 1787 $(Q)mkdir -p $(MODLIB)/$(install-dir) 1788 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1789 1790PHONY += _emodinst_post 1791_emodinst_post: _emodinst_ 1792 $(call cmd,depmod) 1793 1794compile_commands.json: $(extmod-prefix)compile_commands.json 1795PHONY += compile_commands.json 1796 1797clean-dirs := $(KBUILD_EXTMOD) 1798clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \ 1799 $(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache 1800 1801PHONY += help 1802help: 1803 @echo ' Building external modules.' 1804 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 1805 @echo '' 1806 @echo ' modules - default target, build the module(s)' 1807 @echo ' modules_install - install the module' 1808 @echo ' clean - remove generated files in module directory only' 1809 @echo '' 1810 1811# no-op for external module builds 1812PHONY += prepare modules_prepare 1813 1814endif # KBUILD_EXTMOD 1815 1816# Single targets 1817# --------------------------------------------------------------------------- 1818# To build individual files in subdirectories, you can do like this: 1819# 1820# make foo/bar/baz.s 1821# 1822# The supported suffixes for single-target are listed in 'single-targets' 1823# 1824# To build only under specific subdirectories, you can do like this: 1825# 1826# make foo/bar/baz/ 1827 1828ifdef single-build 1829 1830# .ko is special because modpost is needed 1831single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) 1832single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS))) 1833 1834$(single-ko): single_modpost 1835 @: 1836$(single-no-ko): descend 1837 @: 1838 1839ifeq ($(KBUILD_EXTMOD),) 1840# For the single build of in-tree modules, use a temporary file to avoid 1841# the situation of modules_install installing an invalid modules.order. 1842MODORDER := .modules.tmp 1843endif 1844 1845PHONY += single_modpost 1846single_modpost: $(single-no-ko) modules_prepare 1847 $(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER) 1848 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1849 1850KBUILD_MODULES := 1 1851 1852export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko)) 1853 1854# trim unrelated directories 1855build-dirs := $(foreach d, $(build-dirs), \ 1856 $(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d))) 1857 1858endif 1859 1860ifndef CONFIG_MODULES 1861KBUILD_MODULES := 1862endif 1863 1864# Handle descending into subdirectories listed in $(build-dirs) 1865# Preset locale variables to speed up the build process. Limit locale 1866# tweaks to this spot to avoid wrong language settings when running 1867# make menuconfig etc. 1868# Error messages still appears in the original language 1869PHONY += descend $(build-dirs) 1870descend: $(build-dirs) 1871$(build-dirs): prepare 1872 $(Q)$(MAKE) $(build)=$@ \ 1873 single-build=$(if $(filter-out $@/, $(filter $@/%, $(KBUILD_SINGLE_TARGETS))),1) \ 1874 need-builtin=1 need-modorder=1 1875 1876clean-dirs := $(addprefix _clean_, $(clean-dirs)) 1877PHONY += $(clean-dirs) clean 1878$(clean-dirs): 1879 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1880 1881clean: $(clean-dirs) 1882 $(call cmd,rmfiles) 1883 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1884 \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ 1885 -o -name '*.ko.*' \ 1886 -o -name '*.dtb' -o -name '*.dtbo' -o -name '*.dtb.S' -o -name '*.dt.yaml' \ 1887 -o -name '*.dwo' -o -name '*.lst' \ 1888 -o -name '*.su' -o -name '*.mod' \ 1889 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1890 -o -name '*.lex.c' -o -name '*.tab.[ch]' \ 1891 -o -name '*.asn1.[ch]' \ 1892 -o -name '*.symtypes' -o -name 'modules.order' \ 1893 -o -name '.tmp_*.o.*' \ 1894 -o -name '*.c.[012]*.*' \ 1895 -o -name '*.ll' \ 1896 -o -name '*.gcno' \ 1897 -o -name '*.*.symversions' \) -type f -print | xargs rm -f 1898 1899# Generate tags for editors 1900# --------------------------------------------------------------------------- 1901quiet_cmd_tags = GEN $@ 1902 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ 1903 1904tags TAGS cscope gtags: FORCE 1905 $(call cmd,tags) 1906 1907# Script to generate missing namespace dependencies 1908# --------------------------------------------------------------------------- 1909 1910PHONY += nsdeps 1911nsdeps: export KBUILD_NSDEPS=1 1912nsdeps: modules 1913 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps 1914 1915# Clang Tooling 1916# --------------------------------------------------------------------------- 1917 1918quiet_cmd_gen_compile_commands = GEN $@ 1919 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) 1920 1921$(extmod-prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \ 1922 $(if $(KBUILD_EXTMOD),,$(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)) \ 1923 $(if $(CONFIG_MODULES), $(MODORDER)) FORCE 1924 $(call if_changed,gen_compile_commands) 1925 1926targets += $(extmod-prefix)compile_commands.json 1927 1928PHONY += clang-tidy clang-analyzer 1929 1930ifdef CONFIG_CC_IS_CLANG 1931quiet_cmd_clang_tools = CHECK $< 1932 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< 1933 1934clang-tidy clang-analyzer: $(extmod-prefix)compile_commands.json 1935 $(call cmd,clang_tools) 1936else 1937clang-tidy clang-analyzer: 1938 @echo "$@ requires CC=clang" >&2 1939 @false 1940endif 1941 1942# Scripts to check various things for consistency 1943# --------------------------------------------------------------------------- 1944 1945PHONY += includecheck versioncheck coccicheck export_report 1946 1947includecheck: 1948 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1949 -name '*.[hcS]' -type f -print | sort \ 1950 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 1951 1952versioncheck: 1953 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1954 -name '*.[hcS]' -type f -print | sort \ 1955 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 1956 1957coccicheck: 1958 $(Q)$(BASH) $(srctree)/scripts/$@ 1959 1960export_report: 1961 $(PERL) $(srctree)/scripts/export_report.pl 1962 1963PHONY += checkstack kernelrelease kernelversion image_name 1964 1965# UML needs a little special treatment here. It wants to use the host 1966# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 1967# else wants $(ARCH), including people doing cross-builds, which means 1968# that $(SUBARCH) doesn't work here. 1969ifeq ($(ARCH), um) 1970CHECKSTACK_ARCH := $(SUBARCH) 1971else 1972CHECKSTACK_ARCH := $(ARCH) 1973endif 1974checkstack: 1975 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 1976 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) 1977 1978kernelrelease: 1979 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1980 1981kernelversion: 1982 @echo $(KERNELVERSION) 1983 1984image_name: 1985 @echo $(KBUILD_IMAGE) 1986 1987# Clear a bunch of variables before executing the submake 1988 1989ifeq ($(quiet),silent_) 1990tools_silent=s 1991endif 1992 1993tools/: FORCE 1994 $(Q)mkdir -p $(objtree)/tools 1995 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ 1996 1997tools/%: FORCE 1998 $(Q)mkdir -p $(objtree)/tools 1999 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* 2000 2001quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 2002 cmd_rmfiles = rm -rf $(rm-files) 2003 2004# Run depmod only if we have System.map and depmod is executable 2005quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) 2006 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ 2007 $(KERNELRELEASE) 2008 2009# read saved command lines for existing targets 2010existing-targets := $(wildcard $(sort $(targets))) 2011 2012-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) 2013 2014endif # config-build 2015endif # mixed-build 2016endif # need-sub-make 2017 2018PHONY += FORCE 2019FORCE: 2020 2021# Declare the contents of the PHONY variable as phony. We keep that 2022# information in a variable so we can use it in if_changed and friends. 2023.PHONY: $(PHONY) 2024