xref: /openbmc/linux/Documentation/hwmon/hs3001.rst (revision 641e969114c781ff269e1bf1b1f8d3cc33bc4a1a)
1.. SPDX-License-Identifier: GPL-2.0-or-later
2
3Kernel driver HS3001
4====================
5
6Supported chips:
7
8  * Renesas HS3001, HS3002, HS3003, HS3004
9
10    Prefix: 'hs3001'
11
12    Addresses scanned: -
13
14    Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401
15
16Author:
17
18  - Andre Werner <andre.werner@systec-electronic.com>
19
20Description
21-----------
22
23This driver implements support for the Renesas HS3001 chips, a humidity
24and temperature family. Temperature is measured in degrees celsius, relative
25humidity is expressed as a percentage. In the sysfs interface, all values are
26scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
27
28The device communicates with the I2C protocol. Sensors have the I2C
29address 0x44 by default.
30
31sysfs-Interface
32---------------
33
34=================== =================
35temp1_input:        temperature input
36humidity1_input:    humidity input
37=================== =================
38