1*050a0e1fSMatt PorterTDA7419 audio processor 2*050a0e1fSMatt Porter 3*050a0e1fSMatt PorterThis device supports I2C only. 4*050a0e1fSMatt Porter 5*050a0e1fSMatt PorterRequired properties: 6*050a0e1fSMatt Porter 7*050a0e1fSMatt Porter- compatible : "st,tda7419" 8*050a0e1fSMatt Porter- reg : the I2C address of the device. 9*050a0e1fSMatt Porter- vdd-supply : a regulator spec for the common power supply (8-10V) 10*050a0e1fSMatt Porter 11*050a0e1fSMatt PorterOptional properties: 12*050a0e1fSMatt Porter 13*050a0e1fSMatt Porter- st,mute-gpios : a GPIO spec for the MUTE pin. 14*050a0e1fSMatt Porter 15*050a0e1fSMatt PorterPins on the device (for linking into audio routes): 16*050a0e1fSMatt Porter 17*050a0e1fSMatt Porter * SE3L 18*050a0e1fSMatt Porter * SE3R 19*050a0e1fSMatt Porter * SE2L 20*050a0e1fSMatt Porter * SE2R 21*050a0e1fSMatt Porter * SE1L 22*050a0e1fSMatt Porter * SE1R 23*050a0e1fSMatt Porter * DIFFL 24*050a0e1fSMatt Porter * DIFFR 25*050a0e1fSMatt Porter * MIX 26*050a0e1fSMatt Porter * OUTLF 27*050a0e1fSMatt Porter * OUTRF 28*050a0e1fSMatt Porter * OUTLR 29*050a0e1fSMatt Porter * OUTRR 30*050a0e1fSMatt Porter * OUTSW 31*050a0e1fSMatt Porter 32*050a0e1fSMatt PorterExample: 33*050a0e1fSMatt Porter 34*050a0e1fSMatt Porterap: tda7419@44 { 35*050a0e1fSMatt Porter compatible = "st,tda7419"; 36*050a0e1fSMatt Porter reg = <0x44>; 37*050a0e1fSMatt Porter vdd-supply = <&vdd_9v0_reg>; 38*050a0e1fSMatt Porter}; 39