xref: /openbmc/linux/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml (revision 9a87ffc99ec8eb8d35eed7c4f816d75f5cc9662e)

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. NVMEM OPP

maintainers:
  - Ilia Lin <ilia.lin@kernel.org>

allOf:
  - $ref: opp-v2-base.yaml#

description: |
  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
  the CPU frequencies subset and voltage value of each OPP varies based on
  the silicon variant in use.
  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
  defines the voltage and frequency value based on the speedbin blown in
  the efuse combination.
  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
  the OPP framework with required information (existing HW bitmap).
  This is used to determine the voltage and frequency value for each OPP of
  operating-points-v2 table when it is parsed by the OPP framework.

properties:
  compatible:
    const: operating-points-v2-kryo-cpu

  nvmem-cells:
    description: |
      A phandle pointing to a nvmem-cells node representing the
      efuse registers that has information about the
      speedbin that is used to select the right frequency/voltage
      value pair.

  opp-shared: true

patternProperties:
  '^opp-?[0-9]+$':
    type: object
    additionalProperties: false

    properties:
      opp-hz: true

      opp-microvolt: true

      opp-supported-hw:
        description: |
          A single 32 bit bitmap value, representing compatible HW.
          Bitmap for MSM8996 format:
          0:  MSM8996, speedbin 0
          1:  MSM8996, speedbin 1
          2:  MSM8996, speedbin 2
          3:  MSM8996, speedbin 3
          4-31:  unused

          Bitmap for MSM8996SG format (speedbin shifted of 4 left):
          0-3:  unused
          4:  MSM8996SG, speedbin 0
          5:  MSM8996SG, speedbin 1
          6:  MSM8996SG, speedbin 2
          7-31:  unused
        enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
               0x9, 0xd, 0xe, 0xf,
               0x10, 0x20, 0x30, 0x70]

      clock-latency-ns: true

      required-opps: true

    required:
      - opp-hz

required:
  - compatible

if:
  required:
    - nvmem-cells
then:
  patternProperties:
    '^opp-?[0-9]+$':
      required:
        - opp-supported-hw

additionalProperties: false

examples:
  - |
    / {
        model = "Qualcomm Technologies, Inc. DB820c";
        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
        #address-cells = <2>;
        #size-cells = <2>;

        cpus {
            #address-cells = <2>;
            #size-cells = <0>;

            CPU0: cpu@0 {
                device_type = "cpu";
                compatible = "qcom,kryo";
                reg = <0x0 0x0>;
                enable-method = "psci";
                cpu-idle-states = <&CPU_SLEEP_0>;
                capacity-dmips-mhz = <1024>;
                clocks = <&kryocc 0>;
                operating-points-v2 = <&cluster0_opp>;
                power-domains = <&cpr>;
                power-domain-names = "cpr";
                #cooling-cells = <2>;
                next-level-cache = <&L2_0>;
                L2_0: l2-cache {
                    compatible = "cache";
                    cache-level = <2>;
                    cache-unified;
                };
            };

            CPU1: cpu@1 {
                device_type = "cpu";
                compatible = "qcom,kryo";
                reg = <0x0 0x1>;
                enable-method = "psci";
                cpu-idle-states = <&CPU_SLEEP_0>;
                capacity-dmips-mhz = <1024>;
                clocks = <&kryocc 0>;
                operating-points-v2 = <&cluster0_opp>;
                power-domains = <&cpr>;
                power-domain-names = "cpr";
                #cooling-cells = <2>;
                next-level-cache = <&L2_0>;
            };

            CPU2: cpu@100 {
                device_type = "cpu";
                compatible = "qcom,kryo";
                reg = <0x0 0x100>;
                enable-method = "psci";
                cpu-idle-states = <&CPU_SLEEP_0>;
                capacity-dmips-mhz = <1024>;
                clocks = <&kryocc 1>;
                operating-points-v2 = <&cluster1_opp>;
                power-domains = <&cpr>;
                power-domain-names = "cpr";
                #cooling-cells = <2>;
                next-level-cache = <&L2_1>;
                L2_1: l2-cache {
                    compatible = "cache";
                    cache-level = <2>;
                    cache-unified;
                };
            };

            CPU3: cpu@101 {
                device_type = "cpu";
                compatible = "qcom,kryo";
                reg = <0x0 0x101>;
                enable-method = "psci";
                cpu-idle-states = <&CPU_SLEEP_0>;
                capacity-dmips-mhz = <1024>;
                clocks = <&kryocc 1>;
                operating-points-v2 = <&cluster1_opp>;
                power-domains = <&cpr>;
                power-domain-names = "cpr";
                #cooling-cells = <2>;
                next-level-cache = <&L2_1>;
            };

            cpu-map {
                cluster0 {
                    core0 {
                        cpu = <&CPU0>;
                    };

                    core1 {
                        cpu = <&CPU1>;
                    };
                };

                cluster1 {
                    core0 {
                        cpu = <&CPU2>;
                    };

                    core1 {
                        cpu = <&CPU3>;
                    };
                };
            };
        };

        cluster0_opp: opp-table-0 {
            compatible = "operating-points-v2-kryo-cpu";
            nvmem-cells = <&speedbin_efuse>;
            opp-shared;

            opp-307200000 {
                opp-hz = /bits/ 64 <307200000>;
                opp-microvolt = <905000 905000 1140000>;
                opp-supported-hw = <0x7>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp1>;
            };
            opp-1401600000 {
                opp-hz = /bits/ 64 <1401600000>;
                opp-microvolt = <1140000 905000 1140000>;
                opp-supported-hw = <0x5>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp2>;
            };
            opp-1593600000 {
                opp-hz = /bits/ 64 <1593600000>;
                opp-microvolt = <1140000 905000 1140000>;
                opp-supported-hw = <0x1>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp3>;
            };
        };

        cluster1_opp: opp-table-1 {
            compatible = "operating-points-v2-kryo-cpu";
            nvmem-cells = <&speedbin_efuse>;
            opp-shared;

            opp-307200000 {
                opp-hz = /bits/ 64 <307200000>;
                opp-microvolt = <905000 905000 1140000>;
                opp-supported-hw = <0x7>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp1>;
            };
            opp-1804800000 {
                opp-hz = /bits/ 64 <1804800000>;
                opp-microvolt = <1140000 905000 1140000>;
                opp-supported-hw = <0x6>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp4>;
            };
            opp-1900800000 {
                opp-hz = /bits/ 64 <1900800000>;
                opp-microvolt = <1140000 905000 1140000>;
                opp-supported-hw = <0x4>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp5>;
            };
            opp-2150400000 {
                opp-hz = /bits/ 64 <2150400000>;
                opp-microvolt = <1140000 905000 1140000>;
                opp-supported-hw = <0x1>;
                clock-latency-ns = <200000>;
                required-opps = <&cpr_opp6>;
            };
        };

        smem {
            compatible = "qcom,smem";
            memory-region = <&smem_mem>;
            hwlocks = <&tcsr_mutex 3>;
        };

        soc {
            #address-cells = <1>;
            #size-cells = <1>;

            qfprom: qfprom@74000 {
                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
                reg = <0x00074000 0x8ff>;
                #address-cells = <1>;
                #size-cells = <1>;

                speedbin_efuse: speedbin@133 {
                    reg = <0x133 0x1>;
                    bits = <5 3>;
                };
            };
        };
    };