13fd8d9e0SDavid LechnerIlitek ILI9225 display panels 23fd8d9e0SDavid Lechner 33fd8d9e0SDavid LechnerThis binding is for display panels using an Ilitek ILI9225 controller in SPI 43fd8d9e0SDavid Lechnermode. 53fd8d9e0SDavid Lechner 63fd8d9e0SDavid LechnerRequired properties: 7*fe5b66c1SDavid Lechner- compatible: "vot,v220hf01a-t", "ilitek,ili9225" 83fd8d9e0SDavid Lechner- rs-gpios: Register select signal 93fd8d9e0SDavid Lechner- reset-gpios: Reset pin 103fd8d9e0SDavid Lechner 113fd8d9e0SDavid LechnerThe node for this driver must be a child node of a SPI controller, hence 123fd8d9e0SDavid Lechnerall mandatory properties described in ../spi/spi-bus.txt must be specified. 133fd8d9e0SDavid Lechner 143fd8d9e0SDavid LechnerOptional properties: 153fd8d9e0SDavid Lechner- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 163fd8d9e0SDavid Lechner 173fd8d9e0SDavid LechnerExample: 183fd8d9e0SDavid Lechner display@0{ 19*fe5b66c1SDavid Lechner compatible = "vot,v220hf01a-t", "ilitek,ili9225"; 203fd8d9e0SDavid Lechner reg = <0>; 213fd8d9e0SDavid Lechner spi-max-frequency = <12000000>; 223fd8d9e0SDavid Lechner rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; 233fd8d9e0SDavid Lechner reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; 243fd8d9e0SDavid Lechner rotation = <270>; 253fd8d9e0SDavid Lechner }; 26