1*86619c38SEric AnholtHimax HX8357D display panels 2*86619c38SEric Anholt 3*86619c38SEric AnholtThis binding is for display panels using a Himax HX8357D controller in SPI 4*86619c38SEric Anholtmode, such as the Adafruit 3.5" TFT for Raspberry Pi. 5*86619c38SEric Anholt 6*86619c38SEric AnholtRequired properties: 7*86619c38SEric Anholt- compatible: "adafruit,yx350hv15", "himax,hx8357d" 8*86619c38SEric Anholt- dc-gpios: D/C pin 9*86619c38SEric Anholt- reg: address of the panel on the SPI bus 10*86619c38SEric Anholt 11*86619c38SEric AnholtThe node for this driver must be a child node of a SPI controller, hence 12*86619c38SEric Anholtall mandatory properties described in ../spi/spi-bus.txt must be specified. 13*86619c38SEric Anholt 14*86619c38SEric AnholtOptional properties: 15*86619c38SEric Anholt- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 16*86619c38SEric Anholt- backlight: phandle of the backlight device attached to the panel 17*86619c38SEric Anholt 18*86619c38SEric AnholtExample: 19*86619c38SEric Anholt display@0{ 20*86619c38SEric Anholt compatible = "adafruit,yx350hv15", "himax,hx8357d"; 21*86619c38SEric Anholt reg = <0>; 22*86619c38SEric Anholt spi-max-frequency = <32000000>; 23*86619c38SEric Anholt dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; 24*86619c38SEric Anholt rotation = <90>; 25*86619c38SEric Anholt backlight = <&backlight>; 26*86619c38SEric Anholt }; 27