| /openbmc/u-boot/board/freescale/lx2160a/ |
| H A D | lx2160a.c | 307 u8 reg11, reg5, reg13; in config_board_mux() local
337 reg11 = QIXIS_READ(brdcfg[11]); in config_board_mux()
338 reg11 = SET_CFG_MUX1_SDHC1_DSPI(reg11, 0x40); in config_board_mux()
339 QIXIS_WRITE(brdcfg[11], reg11); in config_board_mux()
345 reg11 = QIXIS_READ(brdcfg[11]); in config_board_mux()
346 reg11 = SET_CFG_MUX1_SDHC1_SDHC(reg11); in config_board_mux()
347 QIXIS_WRITE(brdcfg[11], reg11); in config_board_mux()
377 reg11 = QIXIS_READ(brdcfg[11]); in config_board_mux()
378 reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x10); in config_board_mux()
379 QIXIS_WRITE(brdcfg[11], reg11); in config_board_mux()
[all …]
|
| /openbmc/u-boot/board/freescale/c29xpcie/ |
| H A D | cpld.c | 28 u8 reg11; in cpld_set_altbank() local
30 reg11 = in_8(&cpld_data->flhcsr); in cpld_set_altbank()
34 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) in cpld_set_altbank()
38 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) in cpld_set_altbank()
42 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) in cpld_set_altbank()
46 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) in cpld_set_altbank()
|
| /openbmc/linux/drivers/staging/fbtft/ |
| H A D | fb_ssd1289.c | 22 static unsigned int reg11 = 0x6040; variable
23 module_param(reg11, uint, 0000);
24 MODULE_PARM_DESC(reg11, "Register 11h value");
104 write_reg(par, 0x11, reg11 | 0x30); in set_var()
107 write_reg(par, 0x11, reg11 | 0x28); in set_var()
110 write_reg(par, 0x11, reg11 | 0x00); in set_var()
113 write_reg(par, 0x11, reg11 | 0x18); in set_var()
|
| /openbmc/linux/drivers/media/usb/gspca/ |
| H A D | sonixb.c | 77 __u8 reg11; member
722 int reg10, reg11, reg10_max; in setexposure() local
736 reg11 = (15 * gspca_dev->exposure->val + 999) / 1000; in setexposure()
737 if (reg11 < 1) in setexposure()
738 reg11 = 1; in setexposure()
739 else if (reg11 > 16) in setexposure()
740 reg11 = 16; in setexposure()
745 if (gspca_dev->pixfmt.width == 640 && reg11 < 4) in setexposure()
746 reg11 = 4; in setexposure()
752 / (1000 * reg11); in setexposure()
[all …]
|
| H A D | zc3xx.c | 5943 u8 reg07, reg11; in transfer_update() local
5963 reg11 = reg_r(gspca_dev, 0x0011); in transfer_update()
5967 change = reg11 & 0x01; in transfer_update()
|
| /openbmc/linux/arch/arm/boot/dts/st/ |
| H A D | stm32mp15-scmi.dtsi | 39 regulator-name = "reg11";
63 ®11 {
|
| H A D | stm32mp151.dtsi | 1199 reg11: reg11 { label
1200 regulator-name = "reg11";
1565 vdda1v1-supply = <®11>;
|
| H A D | stm32mp131.dtsi | 65 regulator-name = "reg11";
|
| /openbmc/u-boot/doc/device-tree-bindings/phy/ |
| H A D | phy-stm32-usbphyc.txt | 61 vdda1v1-supply = <®11>;
69 vdda1v1-supply = <®11>;
|
| /openbmc/linux/drivers/media/tuners/ |
| H A D | m88rs6000t.c | 28 u8 reg11, reg15, reg16, reg1D, reg1E, reg1F; in m88rs6000t_set_demod_mclk() local
41 reg11 = 0x0E; in m88rs6000t_set_demod_mclk()
45 reg11 = 0x0A; in m88rs6000t_set_demod_mclk()
139 ret = regmap_write(dev->regmap, 0x11, reg11); in m88rs6000t_set_demod_mclk()
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | stm32mp157c-ed1.dts | 378 vdda1v1-supply = <®11>;
384 vdda1v1-supply = <®11>;
|
| H A D | stm32mp157c.dtsi | 729 reg11: reg11 { label
730 regulator-name = "reg11";
|
| /openbmc/linux/drivers/gpu/drm/udl/ |
| H A D | udl_modeset.c | 159 u16 reg11 = mode->crtc_vtotal; in udl_set_display_mode() local
173 buf = udl_set_register_lfsr16(buf, UDL_REG_YENDCOUNT, reg11); in udl_set_display_mode()
|
| /openbmc/linux/drivers/net/ethernet/altera/ |
| H A D | altera_tse.h | 137 u32 reg11; member
|
| /openbmc/linux/drivers/net/ethernet/qlogic/qed/ |
| H A D | qed_hsi.h | 679 __le32 reg11; member
3515 __le32 reg11; member
5585 __le32 reg11; member
8997 __le32 reg11; member
10633 __le32 reg11; member
|