/openbmc/linux/Documentation/hwmon/ |
H A D | amc6821.rst | 70 0 degree C to 124 degree C in steps of 71 4 degree C. Read it out after writing to get 80 temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and 87 0 degree C to 124 degree C in steps 88 of 4 degree C.
|
H A D | nct7904.rst | 38 temp1_input Local temperature (1/1000 degree, 39 0.125 degree resolution) 41 temp[2-9]_input CPU temperatures (1/1000 degree, 42 0.125 degree resolution)
|
H A D | tmp102.rst | 23 sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0 24 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
H A D | sy7636a-hwmon.rst | 20 - SoC on-die temperature in milli-degree C 26 - SoC on-die temperature (milli-degree C)
|
H A D | ds1621.rst | 67 degree Celsius to +125 in 0.5 increments. You may convert this into a 83 1.0 degree Celsius to avoid Tout "bouncing", though! 125 - DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees) 126 - DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees) 127 - DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees) 128 - DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees) 129 - DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
|
H A D | sht21.rst | 40 0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity, 41 0.3 degree Celsius). 63 humidity and 66 ms for temperature. To keep self heating below 0.1 degree
|
H A D | tmp401.rst | 59 Celsius. Resolution of the remote sensor is 0.0625 degree. Local 60 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not 62 degree).
|
H A D | xgene-hwmon.rst | 19 - SoC on-die temperature in milli-degree C 30 - SoC on-die temperature (milli-degree C)
|
H A D | adm1031.rst | 37 degree for the local temperature, 0.125 degree for the remote temperatures.
|
H A D | ds620.rst | 24 into non-volatile on-chip registers). Temperature range is -55 degree Celsius 25 to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
|
H A D | tmp108.rst | 27 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
H A D | tc74.rst | 17 The tc74 has an 8-bit sensor, with 1 degree centigrade resolution
|
H A D | tmp513.rst | 35 -40 to + 125 degrees with a resolution of 0.0625 degree C. 40 0 to 127.5 degrees with a resolution of 0.5 degree.
|
H A D | max6642.rst | 27 is 0.25 degree for the local temperature and for the remote temperature.
|
H A D | max1619.rst | 27 is 1.0 degree for the local temperature and for the remote temperature.
|
H A D | lm63.rst | 64 degree for the local temperature, 0.125 degree for the remote temperature.
|
H A D | sht4x.rst | 25 and temperature sensor. Temperature is measured in degree celsius, relative
|
H A D | twl4030-madc-hwmon.rst | 48 degree Celsius. The Battery charging current channel represents
|
H A D | w83773g.rst | 30 Resolution for both the local and remote channels is 0.125 degree C.
|
H A D | w83793.rst | 49 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, 50 temp5-6 have a 1 degree Celsiis resolution.
|
/openbmc/u-boot/doc/device-tree-bindings/exynos/ |
H A D | tmu.txt | 6 - samsung,min-temp : Minimum temperature value (25 degree celsius) 8 - samsung,max-temp : Maximum temperature value (125 degree celsius) 10 - samsung,start-warning : Temperature at which TMU starts giving warning (degree celsius) 11 - samsung,start-tripping : Temperature at which TMU shuts down the system (degree celsius) 13 in case TMU fails to power off (degree celsius)
|
/openbmc/linux/Documentation/driver-api/thermal/ |
H A D | exynos_thermal.rst | 40 Trimming info for 25 degree Celsius (stored at TRIMINFO register) 41 Temperature code measured at 25 degree Celsius which is unchanged 43 Trimming info for 85 degree Celsius (stored at TRIMINFO register) 44 Temperature code measured at 85 degree Celsius which is unchanged
|
/openbmc/linux/drivers/mtd/nand/raw/atmel/ |
H A D | pmecc.c | 223 unsigned int poly, degree, table_size; in atmel_pmecc_create_gf_tables() local 227 degree = PMECC_GF_DIMENSION_13; in atmel_pmecc_create_gf_tables() 231 degree = PMECC_GF_DIMENSION_14; in atmel_pmecc_create_gf_tables() 245 ret = atmel_pmecc_build_gf_tables(degree, poly, gf_tables); in atmel_pmecc_create_gf_tables() 440 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_substitute() local 441 int cw_len = BIT(degree) - 1; in atmel_pmecc_substitute() 460 for (j = 0; j < degree; j++) { in atmel_pmecc_substitute() 486 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_get_sigma() local 487 int cw_len = BIT(degree) - 1; in atmel_pmecc_get_sigma() 636 int degree = sector_size == 512 ? 13 : 14; in atmel_pmecc_err_location() local [all …]
|
/openbmc/openbmc/meta-openembedded/meta-oe/recipes-kernel/kernel-selftest/kernel-selftest/ |
H A D | userfaultfd.patch | 242 + int degree = random_poly_info.degrees[type]; 247 + buf->rand_deg = degree; 250 + buf->end_ptr = &state[degree]; 281 + int degree; 298 + buf->rand_deg = degree = random_poly_info.degrees[type]; 306 + buf->fptr = &new_state[(rear + separation) % degree]; 310 + buf->end_ptr = &new_state[degree];
|
/openbmc/linux/Documentation/devicetree/bindings/sound/ |
H A D | rt1011.txt | 26 u32. The temperature was measured while doing the calibration. Units: Celsius degree
|