| /openbmc/linux/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/ |
| H A D | rv1_clk_mgr_clk.c | 52 void rv1_dump_clk_registers(struct clk_state_registers *regs, struct clk_bypass *bypass, struct clk… in rv1_dump_clk_registers() argument
58 bypass->dcfclk_bypass = REG_READ(CLK0_CLK8_BYPASS_CNTL) & 0x0007; in rv1_dump_clk_registers()
59 if (bypass->dcfclk_bypass < 0 || bypass->dcfclk_bypass > 4) in rv1_dump_clk_registers()
60 bypass->dcfclk_bypass = 0; in rv1_dump_clk_registers()
69 bypass->dispclk_pypass = REG_READ(CLK0_CLK10_BYPASS_CNTL) & 0x0007; in rv1_dump_clk_registers()
70 if (bypass->dispclk_pypass < 0 || bypass->dispclk_pypass > 4) in rv1_dump_clk_registers()
71 bypass->dispclk_pypass = 0; in rv1_dump_clk_registers()
75 bypass->dprefclk_bypass = REG_READ(CLK0_CLK11_BYPASS_CNTL) & 0x0007; in rv1_dump_clk_registers()
76 if (bypass->dprefclk_bypass < 0 || bypass->dprefclk_bypass > 4) in rv1_dump_clk_registers()
77 bypass->dprefclk_bypass = 0; in rv1_dump_clk_registers()
|
| /openbmc/qemu/docs/ |
| H A D | bypass-iommu.txt | 8 is not flexible. We introduce this bypass iommu property to support
14 determine whether the devices attached on the PCI host bridge will bypass
17 bypass vIOMMU. When bypass_iommu property is not set for a host bridge,
22 The bypass iommu feature support PXB host bridge and default main host
26 on AArch64. Other machine types do not support bypass iommu for default
29 1. The following is the bypass iommu options:
34 (3) X86 default root bus bypass iommu:
46 - a default host bridge which bypass SMMUv3
48 - a pxb host bridge which bypass SMMUv3
60 - a default host bridge which bypass iommu
[all …]
|
| /openbmc/linux/drivers/usb/misc/ |
| H A D | usb3503.c | 49 struct gpio_desc *bypass; member
113 int rst, bypass, conn; in usb3503_switch_mode() local
119 bypass = 0; in usb3503_switch_mode()
124 bypass = 1; in usb3503_switch_mode()
130 bypass = 1; in usb3503_switch_mode()
143 if (hub->bypass) in usb3503_switch_mode()
144 gpiod_set_value_cansleep(hub->bypass, bypass); in usb3503_switch_mode()
261 hub->bypass = devm_gpiod_get_optional(dev, "bypass", GPIOD_OUT_HIGH); in usb3503_probe()
262 if (IS_ERR(hub->bypass)) { in usb3503_probe()
263 err = PTR_ERR(hub->bypass); in usb3503_probe()
[all …]
|
| /openbmc/linux/drivers/regulator/ |
| H A D | anatop-regulator.c | 30 bool bypass; member
65 sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel; in anatop_regmap_enable()
85 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) { in anatop_regmap_core_set_voltage_sel()
100 if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) in anatop_regmap_core_get_voltage_sel()
113 WARN_ON(!anatop_reg->bypass); in anatop_regmap_get_bypass()
115 WARN_ON(anatop_reg->bypass); in anatop_regmap_get_bypass()
117 *enable = anatop_reg->bypass; in anatop_regmap_get_bypass()
126 if (enable == anatop_reg->bypass) in anatop_regmap_set_bypass()
130 anatop_reg->bypass = enable; in anatop_regmap_set_bypass()
270 sreg->bypass = true; in anatop_regulator_probe()
[all …]
|
| /openbmc/linux/include/trace/events/ |
| H A D | bcache.h | 124 TP_PROTO(struct bio *bio, bool hit, bool bypass),
125 TP_ARGS(bio, hit, bypass),
133 __field(bool, bypass )
142 __entry->bypass = bypass;
148 __entry->nr_sector, __entry->cache_hit, __entry->bypass)
153 bool writeback, bool bypass),
154 TP_ARGS(c, inode, bio, writeback, bypass),
163 __field(bool, bypass )
173 __entry->bypass = bypass;
179 __entry->nr_sector, __entry->writeback, __entry->bypass)
|
| /openbmc/qemu/hw/virtio/ |
| H A D | virtio-iommu.c | 50 bool bypass; member
94 bypassed = s->config.bypass; in virtio_iommu_device_bypassed()
100 bypassed = s->config.bypass; in virtio_iommu_device_bypassed()
102 bypassed = ep->domain->bypass; in virtio_iommu_device_bypassed()
355 bool bypass) in virtio_iommu_get_domain() argument
361 if (domain->bypass != bypass) { in virtio_iommu_get_domain()
371 domain->bypass = bypass; in virtio_iommu_get_domain()
816 if (domain->bypass) { in virtio_iommu_map()
866 if (domain->bypass) { in virtio_iommu_unmap()
1166 bypass_allowed = s->config.bypass; in virtio_iommu_translate()
[all …]
|
| /openbmc/linux/arch/arm/mach-omap2/ |
| H A D | sram.h | 12 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
25 int bypass);
38 int bypass);
|
| H A D | clkt2xxx_dpllcore.c | 114 u32 bypass = 0; in omap2_reprogram_dpllcore() local
162 bypass = 1; in omap2_reprogram_dpllcore()
169 bypass); in omap2_reprogram_dpllcore()
|
| H A D | clkt2xxx_virt_prcm_set.c | 100 u32 cur_rate, done_rate, bypass = 0; in omap2_select_table_rate() local
135 bypass = 1; in omap2_select_table_rate()
153 bypass); in omap2_select_table_rate()
|
| H A D | sram.c | 242 static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
244 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) in omap2_set_prcm() argument
247 return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); in omap2_set_prcm()
|
| /openbmc/linux/drivers/clk/imx/ |
| H A D | clk-sscg-pll.c | 75 int bypass; member
146 temp_setup->bypass = PLL_BYPASS1; in clk_sscg_divq_lookup()
220 temp_setup->bypass = PLL_BYPASS_NONE; in clk_sscg_divf1_lookup()
280 setup->bypass = PLL_BYPASS2; in clk_sscg_pll_find_setup()
368 val |= FIELD_PREP(SSCG_PLL_BYPASS_MASK, setup->bypass); in clk_sscg_pll_set_rate()
405 val |= FIELD_PREP(SSCG_PLL_BYPASS_MASK, pll->setup.bypass); in clk_sscg_pll_set_parent()
416 int bypass) in __clk_sscg_pll_determine_rate() argument
427 switch (bypass) { in __clk_sscg_pll_determine_rate()
443 rate, bypass); in __clk_sscg_pll_determine_rate()
|
| /openbmc/linux/drivers/md/bcache/ |
| H A D | stats.c | 184 bool hit, bool bypass) in mark_cache_stats() argument
186 if (!bypass) in mark_cache_stats()
199 bool hit, bool bypass) in bch_mark_cache_accounting() argument
203 mark_cache_stats(&dc->accounting.collector, hit, bypass); in bch_mark_cache_accounting()
204 mark_cache_stats(&c->accounting.collector, hit, bypass); in bch_mark_cache_accounting()
|
| /openbmc/qemu/tests/qapi-schema/ |
| H A D | type-bypass-bad-gen.err | 1 type-bypass-bad-gen.json: In command 'foo':
2 type-bypass-bad-gen.json:2: flag 'gen' may only use false value
|
| /openbmc/linux/drivers/clk/at91/ |
| H A D | sckc.c | 122 bool bypass, in at91_clk_register_slow_osc() argument
148 if (bypass) in at91_clk_register_slow_osc()
378 bool bypass; in at91sam9x5_sckc_register() local
398 bypass = of_property_read_bool(child, "atmel,osc-bypass"); in at91sam9x5_sckc_register()
402 bypass = of_property_read_bool(np, "atmel,osc-bypass"); in at91sam9x5_sckc_register()
411 &parent_data, 1200000, bypass, bits); in at91sam9x5_sckc_register()
479 bool bypass; in of_sam9x60_sckc_setup() local
496 bypass = of_property_read_bool(np, "atmel,osc-bypass"); in of_sam9x60_sckc_setup()
498 &parent_data, 5000000, bypass, in of_sam9x60_sckc_setup()
|
| /openbmc/linux/drivers/media/platform/nxp/imx8-isi/ |
| H A D | imx8-isi-hw.c | 122 bool *bypass) in mxc_isi_channel_set_scaling() argument
165 *bypass = in_size->height == out_size->height && in mxc_isi_channel_set_scaling()
211 bool *bypass) in mxc_isi_channel_set_csc() argument
256 *bypass = !cscen; in mxc_isi_channel_set_csc()
306 bool bypass) in mxc_isi_channel_set_control() argument
321 if (bypass) in mxc_isi_channel_set_control()
540 mxc_isi_pipe_irq_t irq_handler, bool bypass) in mxc_isi_channel_acquire() argument
558 | (!bypass ? MXC_ISI_CHANNEL_RES_LINE_BUF : 0); in mxc_isi_channel_acquire()
592 int mxc_isi_channel_chain(struct mxc_isi_pipe *pipe, bool bypass) in mxc_isi_channel_chain() argument
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-bus-i2c-devices-bq32k | 5 Description: Attribute for enable/disable the trickle charge bypass
7 enable/disable the Trickle charge FET bypass.
|
| H A D | sysfs-bus-iio-filter-admv8818 | 10 - bypass -> bypass low pass filter, high pass filter and disable/unregister
|
| /openbmc/linux/drivers/clk/socfpga/ |
| H A D | clk-pll.c | 44 unsigned long bypass; in clk_pll_recalc_rate() local
47 bypass = readl(clk_mgr_base_addr + CLKMGR_BYPASS); in clk_pll_recalc_rate()
48 if (bypass & MAINPLL_BYPASS) in clk_pll_recalc_rate()
|
| /openbmc/openbmc/meta-arm/meta-arm-bsp/recipes-bsp/scp-firmware/ |
| H A D | scp-firmware-juno.inc | 11 …install -D "${B}/${TYPE}/${FW_TARGETS}/bin/${SCP_PLATFORM}-bl1-bypass.bin" "${D}/firmware/${FW}_${…
12 …install -D "${B}/${TYPE}/${FW_TARGETS}/bin/${SCP_PLATFORM}-bl1-bypass.elf" "${D}/firmware/${FW}_${…
|
| /openbmc/linux/Documentation/devicetree/bindings/clock/ti/ |
| H A D | dpll.txt | 7 (reference clock and bypass clock), with digital phase locked
38 and second entry bypass clock
57 - ti,low-power-bypass : DPLL output matches rate of parent bypass clock
81 ti,low-power-bypass;
|
| /openbmc/linux/arch/mips/include/asm/octeon/ |
| H A D | cvmx-asxx-defs.h | 200 uint64_t bypass:1; member
202 uint64_t bypass:1;
469 uint64_t bypass:1; member
475 uint64_t bypass:1;
493 uint64_t bypass:1; member
503 uint64_t bypass:1;
|
| /openbmc/linux/drivers/power/supply/ |
| H A D | bq25980_charger.c | 31 bool bypass; member
306 if (bq->state.bypass) in bq25980_set_input_curr_lim()
328 if (bq->state.bypass) { in bq25980_get_input_volt_lim()
350 if (bq->state.bypass) { in bq25980_set_input_volt_lim()
454 bq->state.bypass = en_bypass; in bq25980_set_bypass()
456 return bq->state.bypass; in bq25980_set_bypass()
604 state->bypass = chg_ctrl_2 & BQ25980_EN_BYPASS; in bq25980_get_state()
766 else if (state.bypass) in bq25980_get_charger_property()
768 else if (!state.bypass) in bq25980_get_charger_property()
828 old_state.bypass != new_state->bypass); in bq25980_state_changed()
[all …]
|
| /openbmc/linux/drivers/pwm/ |
| H A D | pwm-sun4i.c | 173 bool *bypass) in sun4i_pwm_calculate() argument
180 *bypass = sun4i_pwm->data->has_direct_mod_clk_output && in sun4i_pwm_calculate()
187 if (*bypass) in sun4i_pwm_calculate()
241 bool bypass; in sun4i_pwm_apply() local
254 &bypass); in sun4i_pwm_apply()
266 if (bypass) { in sun4i_pwm_apply()
|
| /openbmc/linux/net/sched/ |
| H A D | sch_fifo.c | 99 bool bypass; in __fifo_init() local
119 bypass = sch->limit >= psched_mtu(qdisc_dev(sch)); in __fifo_init()
121 bypass = sch->limit >= 1; in __fifo_init()
123 if (bypass) in __fifo_init()
|
| /openbmc/linux/arch/mips/cavium-octeon/executive/ |
| H A D | cvmx-helper-jtag.c | 66 jtgc.s.bypass = 0x3; in cvmx_helper_qlm_jtag_init()
68 jtgc.s.bypass = 0xf; in cvmx_helper_qlm_jtag_init()
|