| /openbmc/linux/arch/arm/boot/dts/st/ |
| H A D | stm32mp151a-prtt1s.dts | 41 pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
48 pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
|
| H A D | stm32mp13-pinctrl.dtsi | 18 pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
28 pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
|
| /openbmc/linux/arch/arm64/boot/dts/altera/ |
| H A D | socfpga_stratix10_socdk.dts | 72 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */
79 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx6qdl-vicut1-12inch.dtsi | 83 "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
|
| H A D | imx6dl-victgo.dts | 263 "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
|
| /openbmc/linux/arch/arm64/boot/dts/ti/ |
| H A D | k3-am62a7-sk.dts | 147 AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
163 AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
|
| H A D | k3-am625-phyboard-lyra-rdk.dts | 98 AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
|
| H A D | k3-am642-phyboard-electra-rdk.dts | 130 AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */
|
| /openbmc/u-boot/board/amazon/kc1/ |
| H A D | kc1.h | 39 { I2C1_SCL, (IEN | PTU | M0) }, /* i2c1_scl */
|
| /openbmc/u-boot/board/ti/panda/ |
| H A D | panda_mux_data.h | 37 {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | am335x-netcan-plus-1xx.dts | 96 "I2C1_SCL",
|
| H A D | am335x-baltos-ir2110.dts | 92 "I2C1_SCL",
|
| H A D | am335x-netcom-plus-2xx.dts | 104 "I2C1_SCL",
|
| H A D | am335x-netcom-plus-8xx.dts | 136 "I2C1_SCL",
|
| H A D | am335x-baltos-ir3220.dts | 138 "I2C1_SCL",
|
| H A D | am335x-baltos-ir5221.dts | 162 "I2C1_SCL",
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap4/ |
| H A D | mux_omap4.h | 186 #define I2C1_SCL 0x0122 macro
|
| /openbmc/linux/arch/arm64/boot/dts/hisilicon/ |
| H A D | hi3670-hikey970.dts | 304 "[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
306 "[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
|
| H A D | hi6220-hikey.dts | 479 "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
|
| H A D | hi3660-hikey960.dts | 454 "[I2C1_SCL]", /* Actual SoC I2C1 */
456 "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap5/ |
| H A D | mux_dra7xx.h | 327 #define I2C1_SCL 0x404 macro
|
| /openbmc/u-boot/board/ti/am57xx/ |
| H A D | mux_data.h | 215 {I2C1_SCL, (M0 | PIN_INPUT_PULLUP)}, /* i2c1_scl.i2c1_scl */
498 {I2C1_SCL, (M0 | PIN_INPUT)}, /* i2c1_scl.i2c1_scl */
718 {I2C1_SCL, (M0 | PIN_INPUT)}, /* i2c1_scl.i2c1_scl */
902 {I2C1_SCL, (M0 | PIN_INPUT)}, /* i2c1_scl.i2c1_scl */
1000 {I2C1_SCL, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SCL */
|
| /openbmc/u-boot/board/gumstix/duovero/ |
| H A D | duovero_mux_data.h | 19 {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | zynqmp-zcu100-revC.dts | 135 gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
|
| /openbmc/linux/arch/arm/boot/dts/hisilicon/ |
| H A D | hi3620-hi4511.dts | 149 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */
456 0x184 0 /* I2C1_SCL (IOCFG105) */
|