| /openbmc/linux/drivers/pinctrl/ |
| H A D | pinctrl-xway.c | 117 MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
157 static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
159 static const unsigned ase_pins_ephy_led0[] = {GPIO2};
163 static const unsigned ase_pins_dfe_led1[] = {GPIO2};
245 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII),
277 static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2};
281 static const unsigned danube_pins_exin2[] = {GPIO2};
321 static const unsigned danube_pins_clkout3[] = {GPIO2};
420 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE),
476 static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
[all …]
|
| H A D | pinctrl-lantiq.h | 109 GPIO2, enumerator
|
| /openbmc/u-boot/board/technexion/tao3530/ |
| H A D | tao3530.c | 135 writel(~(GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); in misc_init_r()
140 writel(GPIO10 | GPIO8 | GPIO2 | GPIO1, in misc_init_r()
|
| /openbmc/linux/arch/sh/kernel/cpu/sh4a/ |
| H A D | setup-shx3.c | 185 GPIO0, GPIO1, GPIO2, GPIO3, enumerator
233 INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
267 DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
303 GPIO2, GPIO1, GPIO0, IRM } },
|
| /openbmc/linux/drivers/media/usb/dvb-usb/ |
| H A D | dib07x0.h | 8 GPIO2 = 3, enumerator
|
| /openbmc/u-boot/board/Arcturus/ucp1020/ |
| H A D | ucp1020.h | 13 #define GPIO2 29 macro
|
| /openbmc/linux/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3399-gru-chromebook.dtsi | 324 gpio-line-names = /* GPIO2 A 0-7 */
334 /* GPIO2 B 0-7 */
344 /* GPIO2 C 0-7 */
354 /* GPIO2 D 0-4 */
|
| H A D | rk3399-gru-scarlet.dtsi | 467 gpio-line-names = /* GPIO2 A 0-7 */
477 /* GPIO2 B 0-7 */
487 /* GPIO2 C 0-7 */
497 /* GPIO2 D 0-4 */
|
| H A D | rk3588-nanopc-t6.dts | 240 gpio-line-names = /* GPIO2 A0-A7 */
243 /* GPIO2 B0-B7 */
246 /* GPIO2 C0-C7 */
249 /* GPIO2 D0-D7 */
|
| /openbmc/linux/arch/arm/mach-pxa/ |
| H A D | pxa300.c | 26 MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
|
| /openbmc/linux/include/linux/mfd/ |
| H A D | tps65010.h | 120 #define GPIO2 2 macro
|
| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | rt5660.txt | 26 1: using GPIO2 pin as dmic1 data pin
|
| H A D | rt5668.txt | 17 1: using GPIO2 pin as dmic1 data pin
|
| H A D | rt5677.txt | 39 Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | ste,nomadik.txt | 114 pins = "GPIO0", "GPIO2";
125 pins = "GPIO0", "GPIO2";
|
| /openbmc/u-boot/board/ti/beagle/ |
| H A D | beagle.c | 486 writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, in misc_init_r()
492 writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); in misc_init_r()
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm2837-rpi-cm3-io3.dts | 21 "GPIO2",
|
| H A D | bcm2835-rpi-cm1-io1.dts | 21 "GPIO2",
|
| /openbmc/linux/Documentation/arch/arm/ |
| H A D | netwinder.rst | 33 0x033a GPIO2
|
| /openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
| H A D | omap.h | 111 #define GPIO2 (0x1 << 2) macro
|
| /openbmc/linux/arch/arm/boot/dts/st/ |
| H A D | ste-snowball.dts | 416 * the second is "GPIO2" and so forth. Confusingly, the
417 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
421 "PM_GPIO1", /* AB8500 GPIO2 */
|
| /openbmc/linux/Documentation/devicetree/bindings/clock/ |
| H A D | ti-clkctrl.txt | 58 Example: Clock consumer node for GPIO2:
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mp-msc-sm2s-ep1.dts | 108 <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19>, /* GPIO2 */
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | max77620.txt | 34 and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
46 Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
|
| /openbmc/linux/Documentation/devicetree/bindings/interrupt-controller/ |
| H A D | brcm,bcm2835-armctrl-ic.txt | 98 19: GPIO2
|