Searched hist:"781551 df57c792aee291cd80a6aca24cd56cdd71" (Results 1 – 3 of 3) sorted by relevance
/openbmc/linux/drivers/misc/ |
H A D | lattice-ecp3-config.c | 781551df57c792aee291cd80a6aca24cd56cdd71 Fri Dec 07 02:06:59 CST 2012 Stefan Roese <sr@denx.de> misc: Add Lattice ECP3 FPGA configuration via SPI
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus.
Here an example on my custom MPC5200 based board:
$ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading
leads to these messages:
lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured!
Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
H A D | Makefile | diff 781551df57c792aee291cd80a6aca24cd56cdd71 Fri Dec 07 02:06:59 CST 2012 Stefan Roese <sr@denx.de> misc: Add Lattice ECP3 FPGA configuration via SPI
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus.
Here an example on my custom MPC5200 based board:
$ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading
leads to these messages:
lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured!
Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
H A D | Kconfig | diff 781551df57c792aee291cd80a6aca24cd56cdd71 Fri Dec 07 02:06:59 CST 2012 Stefan Roese <sr@denx.de> misc: Add Lattice ECP3 FPGA configuration via SPI
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus.
Here an example on my custom MPC5200 based board:
$ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading
leads to these messages:
lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured!
Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|