| /openbmc/qemu/tests/qemu-iotests/ |
| H A D | 141.out | diff 9c46f4a06d9d57bc9f357cec3e37de94e6068413 Fri Aug 09 13:52:53 CDT 2019 Max Reitz <mreitz@redhat.com> iotests: Fix 141 when run with qed
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | 102.out | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | 144.out | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | 102 | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | 141 | diff 9c46f4a06d9d57bc9f357cec3e37de94e6068413 Fri Aug 09 13:52:53 CDT 2019 Max Reitz <mreitz@redhat.com> iotests: Fix 141 when run with qed
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
| H A D | common.filter | diff 9c46f4a06d9d57bc9f357cec3e37de94e6068413 Fri Aug 09 13:52:53 CDT 2019 Max Reitz <mreitz@redhat.com> iotests: Fix 141 when run with qed
69f47505ee has changed qcow2 in such a way that the commit job run in
test 141 (and 144[1]) returns before it emits the READY event. However,
141 also runs with qed, where the order is still the other way around.
Just filter out the {"return": {}} so the test passes for qed again.
[1] 144 only runs with qcow2, so it is fine as it is.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190809185253.17535-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
| /openbmc/qemu/block/ |
| H A D | qcow2-refcount.c | diff 5e9785505210e2477e590e61b1ab100d0ec22b01 Thu Oct 24 09:26:58 CDT 2019 Kevin Wolf <kwolf@redhat.com> qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.
As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.
This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Cc: qemu-stable@nongnu.org
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | vdi.c | diff ad6434dc620958503a0ad2ab92269805c26bb806 Thu Jul 25 10:55:10 CDT 2019 Max Reitz <mreitz@redhat.com> vdi: Make block_status recurse for fixed images
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-2-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
| H A D | qcow2.h | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | qcow2.c | diff 5e9785505210e2477e590e61b1ab100d0ec22b01 Thu Oct 24 09:26:58 CDT 2019 Kevin Wolf <kwolf@redhat.com> qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.
As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.
This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Cc: qemu-stable@nongnu.org
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| H A D | vmdk.c | diff 4dd84ac9a731f19576aec14d0f2f0037e81a5922 Thu Jul 25 10:55:11 CDT 2019 Max Reitz <mreitz@redhat.com> vmdk: Make block_status recurse for flat extents
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
| H A D | io.c | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
| /openbmc/qemu/include/block/ |
| H A D | block.h | diff 69f47505ee66afaa513305de0c1895a224e52c45 Mon Apr 08 11:26:17 CDT 2019 Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> block: avoid recursive block_status call if possible
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|