Searched hist:"3 b7f4bde06daaff391a374fc27c8163b2847de34" (Results 1 – 2 of 2) sorted by relevance
| /openbmc/linux/drivers/hwmon/ |
| H A D | nct6775.h | diff 3b7f4bde06daaff391a374fc27c8163b2847de34 Mon Jul 17 15:10:51 CDT 2023 Ahmad Khalifa <ahmad@khalifa.ws> hwmon: (nct6775) Increase and reorder ALARM/BEEP bits
* Increase available bits, IN: 16 to 24, FAN: 8 to 12,
TEMP: 6 to 12
* Reorder alarm/beep definitions to match in order to allow
additional inputs in the future
* Remove comments about 'unused' bits as probe() is a better
reference
Testing note:
* Tested on nct6799 with IN/FAN/TEMP, and changing min/max/high/hyst,
that triggers the corresponding alarms correctly. Good confirmation
on the original mapping of the registers and masks.
As to be expected, only 4 fans and 2 temps (fixed) have limits
currently on nct6799 on my board.
* Trouble with testing intrusion alarms and beeps, no way to confirm
those. As I understand now, intrusion/caseopen is probably not
connected on my board.
And I haven't seen a buzzer on a board in ages.
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230717201050.1657809-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| H A D | nct6775-core.c | diff 3b7f4bde06daaff391a374fc27c8163b2847de34 Mon Jul 17 15:10:51 CDT 2023 Ahmad Khalifa <ahmad@khalifa.ws> hwmon: (nct6775) Increase and reorder ALARM/BEEP bits
* Increase available bits, IN: 16 to 24, FAN: 8 to 12,
TEMP: 6 to 12
* Reorder alarm/beep definitions to match in order to allow
additional inputs in the future
* Remove comments about 'unused' bits as probe() is a better
reference
Testing note:
* Tested on nct6799 with IN/FAN/TEMP, and changing min/max/high/hyst,
that triggers the corresponding alarms correctly. Good confirmation
on the original mapping of the registers and masks.
As to be expected, only 4 fans and 2 temps (fixed) have limits
currently on nct6799 on my board.
* Trouble with testing intrusion alarms and beeps, no way to confirm
those. As I understand now, intrusion/caseopen is probably not
connected on my board.
And I haven't seen a buzzer on a board in ages.
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230717201050.1657809-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|