Home
last modified time | relevance | path

Searched +full:strobe +full:- +full:gpios +full:- +full:polarity (Results 1 – 21 of 21) sorted by relevance

/openbmc/linux/Documentation/devicetree/bindings/regulator/
H A Drichtek,rtmv20-regulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - ChiYuan Huang <cy_huang@richtek.com>
16 There're still four pins for camera control, two inputs (strobe and vsync),
17 the others for outputs (fsin1 and fsin2). Strobe input to start the current
27 wakeup-source: true
32 enable-gpios:
36 richtek,ld-pulse-delay-us:
[all …]
/openbmc/linux/Documentation/devicetree/bindings/media/i2c/
H A Dst,st-vgxy61.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
12 - Sylvain Petinot <sylvain.petinot@foss.st.com>
14 description: |-
15 STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
19 - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
21 - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
[all …]
/openbmc/linux/Documentation/devicetree/bindings/mmc/
H A Dmmc-controller.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Ulf Hansson <ulf.hansson@linaro.org>
25 "#address-cell
[all...]
/openbmc/linux/Documentation/devicetree/bindings/usb/
H A Dci-hdrc-usb2.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Xu Yang <xu.yang_2@nxp.com>
11 - Peng Fan <peng.fan@nxp.com>
16 - enum:
17 - chipidea,usb2
18 - lsi,zevio-usb
19 - nuvoton,npcm750-udc
[all …]
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3399-nanopi4.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * RK3399-based FriendlyElec boards device tree source
14 /dts-v1/;
15 #include <dt-bindings/input/linux-event-codes.h>
17 #include "rk3399-opp.dtsi"
27 stdout-path = "serial2:1500000n8";
30 clkin_gmac: external-gmac-clock {
31 compatible = "fixed-clock";
32 clock-frequency = <125000000>;
33 clock-output-names = "clkin_gmac";
[all …]
H A Drk3399-leez-p710.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pwm/pwm.h>
11 #include "rk3399-opp.dtsi"
24 stdout-path = "serial2:1500000n8";
27 clkin_gmac: external-gmac-clock {
28 compatible = "fixed-clock";
29 clock-frequency = <125000000>;
[all …]
H A Drk3399pro-vmarc-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rockchip.h>
10 #include <dt-bindings/pwm/pwm.h>
13 compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
20 vcc3v3_pcie: vcc-pcie-regulator {
21 compatible = "regulator-fixed";
22 enable-active-high;
24 pinctrl-names = "default";
25 pinctrl-0 = <&pcie_pwr>;
[all …]
H A Drk3399-hugsun-x99.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /dts-v1/;
3 #include <dt-bindings/pwm/pwm.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/interrupt-controller/irq.h>
7 #include "rk3399-opp.dtsi"
20 stdout-path = "serial2:1500000n8";
23 clkin_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 clock-frequency = <125000000>;
[all …]
H A Drk3399-sapphire.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "dt-bindings/pwm/pwm.h"
7 #include "dt-bindings/input/input.h"
9 #include "rk3399-opp.dtsi"
12 compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
20 stdout-path = "serial2:1500000n8";
23 clkin_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 clock-frequency = <125000000>;
26 clock-output-names = "clkin_gmac";
[all …]
H A Drk3399-puma.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/pwm/pwm.h>
8 #include "rk3399-opp.dtsi"
16 compatible = "gpio-leds";
17 pinctrl-names = "default";
18 pinctrl-0 = <&module_led_pin>;
20 module_led: led-0 {
22 gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
23 linux,default-trigger = "heartbeat";
24 panic-indicator;
[all …]
H A Drk3399-firefly.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pwm/pwm.h>
10 #include <dt-bindings/usb/pd.h>
12 #include "rk3399-opp.dtsi"
15 model = "Firefly-RK3399 Board";
16 compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
25 stdout-path = "serial2:1500000n8";
[all …]
H A Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
10 #include "rk3399-op1-opp.dtsi"
19 stdout-path = "serial2:115200n8";
28 * - Rails that only connect to the EC (or devices that the EC talks to)
30 * - Rails _are_ included if the rails go to the AP even if the AP
39 * - The EC controls the enable and the EC always enables a rail as
41 * - The rails are actually connected to each other by a jumper and
46 ppvar_sys: ppvar-sys {
[all …]
H A Drk3399-rock960.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 #include "rk3399-opp.dtsi"
10 #include <dt-bindings/interrupt-controller/irq.h>
19 sdio_pwrseq: sdio-pwrseq {
20 compatible = "mmc-pwrseq-simple";
22 clock-names = "ext_clock";
23 pinctrl-names = "default";
24 pinctrl-0 = <&wifi_enable_h>;
25 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
28 vcc12v_dcin: vcc12v-dcin {
[all …]
H A Drk3399-orangepi.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "dt-bindings/pwm/pwm.h"
9 #include "dt-bindings/input/input.h"
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include "dt-bindings/usb/pd.h"
13 #include "rk3399-opp.dtsi"
17 compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
26 stdout-path = "serial2:1500000n8";
29 clkin_gmac: external-gmac-clock {
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Drk3399-firefly.dts1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
7 #include <dt-bindings/pwm/pwm.h>
8 #include <dt-bindings/pinctrl/rockchip.h>
10 #include "rk3399-sdram-ddr3-1600.dtsi"
13 model = "Firefly-RK3399 Board";
14 compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
17 stdout-path = &uart2;
18 u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
22 compatible = "pwm-backlight";
[all …]
H A Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
10 #include "rk3399-op1-opp.dtsi"
14 u-boot,dm-pre-reloc;
15 stdout-path = "serial2:115200n8";
16 u-boot,spl-boot-order = &spi_flash;
20 u-boot,spl-payload-offset = <0x40000>;
29 * - Rails that only connect to the EC (or devices that the EC talks to)
31 * - Rails _are_ included if the rails go to the AP even if the AP
[all …]
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Domap3-n900.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
4 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
7 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/media/video-interfaces.h>
15 * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
17 * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
18 * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
34 compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
[all …]
H A Domap3-gta04.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
5 * Based on omap3-beagle-xm.dts
7 /dts-v1/;
10 #include <dt-bindings/input/input.h>
17 cpu0-supply = <&vcc>;
27 stdout-path = &uart3;
33 /delete-property/ mmc2;
34 /delete-property/ mmc3;
38 compatible = "regulator-fixed";
39 regulator-name = "ldo_3v3";
[all …]
/openbmc/linux/drivers/media/i2c/
H A Dst-vgxy61.c1 // SPDX-License-Identifier: GPL-2.0
20 #include <media/mipi-csi2.h>
21 #include <media/v4l2-async.h>
22 #include <media/v4l2-ctrls.h>
23 #include <media/v4l2-device.h>
24 #include <media/v4l2-fwnode.h>
25 #include <media/v4l2-subdev.h>
465 * Freq range is [6Mhz-27Mhz] already checked. in compute_pll_parameters_by_freq()
466 * Output of divider should be in [6Mhz-12Mhz[. in compute_pll_parameters_by_freq()
484 return div64_u64((u64)sensor->data_rate_in_mbps * sensor->nb_of_lane, in get_pixel_rate()
[all …]
/openbmc/linux/drivers/mmc/core/
H A Dhost.c1 // SPDX-License-Identifier: GPL-2.0-only
6 * Copyright (C) 2007-2008 Pierre Ossman
25 #include <linux/mmc/slot-gpio.h>
30 #include "slot-gpio.h"
47 if (!host->bus_ops) in mmc_host_class_prepare()
51 if (host->bus_ops->pre_suspend) in mmc_host_class_prepare()
52 return host->bus_ops->pre_suspend(host); in mmc_host_class_prepare()
77 wakeup_source_unregister(host->ws); in mmc_host_classdev_release()
78 if (of_alias_get_id(host->parent->of_node, "mmc") < 0) in mmc_host_classdev_release()
79 ida_simple_remove(&mmc_host_ida, host->index); in mmc_host_classdev_release()
[all …]
/openbmc/linux/drivers/net/wireless/ath/ath5k/
H A Dreg.h2 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
3 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
4 * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
28 * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
30 * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
33 * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
42 * AR5210-Specific TXDP registers
46 #define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */
47 #define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */
70 #define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */
[all …]