Home
last modified time | relevance | path

Searched +full:led +full:- +full:speed +full:- +full:mode (Results 1 – 25 of 437) sorted by relevance

12345678910>>...18

/openbmc/linux/Documentation/ABI/testing/
H A Dsysfs-class-led-trigger-netdev1 What: /sys/class/leds/<led>/device_name
4 Contact: linux-leds@vger.kernel.org
8 What: /sys/class/leds/<led>/interval
11 Contact: linux-leds@vger.kernel.org
13 Specifies the duration of the LED blink in milliseconds.
18 Trying to set any value in this specific mode will return
21 What: /sys/class/leds/<led>/link
24 Contact: linux-leds@vger.kernel.org
28 If set to 0 (default), the LED's normal state is off.
30 If set to 1, the LED's normal state reflects the link state
[all …]
H A Dsysfs-driver-wacom1 What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed
4 Contact: linux-bluetooth@vger.kernel.org
6 The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file
7 controls reporting speed of Wacom bluetooth tablet. Reading
8 from this file returns 1 if tablet reports in high speed mode
10 switches reporting speed.
12 What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led
14 Contact: linux-input@vger.kernel.org
25 Contact: linux-input@vger.kernel.org
27 <obsoleted by the LED class API now exported by the driver>
[all …]
H A Dsysfs-platform-msi-laptop1 What: /sys/devices/platform/msi-laptop-pf/lcd_level
8 What: /sys/devices/platform/msi-laptop-pf/auto_brightness
17 What: /sys/devices/platform/msi-laptop-pf/wlan
24 What: /sys/devices/platform/msi-laptop-pf/bluetooth
33 What: /sys/devices/platform/msi-laptop-pf/touchpad
41 What: /sys/devices/platform/msi-laptop-pf/turbo_mode
46 Contains either 0 or 1 and indicates if turbo mode is turned
47 on. In turbo mode power LED is orange and processor is
48 overclocked. Turbo mode is available only if charging. It is
49 only possible to toggle turbo mode state by pressing Fn+F10,
[all …]
/openbmc/linux/Documentation/devicetree/bindings/usb/
H A Dusb251xb.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Microchip USB 2.0 Hi-Speed Hub Controller
10 - Richard Leitner <richard.leitner@skidata.com>
15 - microchip,usb2422
16 - microchip,usb2512b
17 - microchip,usb2512bi
18 - microchip,usb2513b
19 - microchip,usb2513bi
[all …]
/openbmc/linux/arch/arm/boot/dts/qcom/
H A Dqcom-ipq8064-rb3011.dts1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-ipq8064.dtsi"
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/leds/common.h>
7 model = "MikroTik RB3011UiAS-RM";
14 mdio-gpio0 = &mdio0;
15 mdio-gpio1 = &mdio1;
20 stdout-path = "serial0:115200n8";
28 mdio0: mdio-0 {
30 compatible = "virtual,mdio-gpio";
[all …]
/openbmc/linux/arch/arm/boot/dts/st/
H A Dstih410-b2260.dts1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
12 compatible = "st,stih410-b2260", "st,stih410";
15 stdout-path = &uart1;
29 compatible = "gpio-leds";
30 led-user-green-1 {
33 linux,default-trigger = "heartbeat";
34 default-state = "off";
37 led-user-green-2 {
[all …]
/openbmc/linux/arch/arm/boot/dts/broadcom/
H A Dbcm958625-meraki-alamo.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
8 #include "bcm958625-meraki-mx6x-common.dtsi"
12 compatible = "gpio-keys-polled";
14 poll-interval = <20>;
16 button-reset {
24 compatible = "gpio-leds";
26 led-0 {
27 /* green:wan1-left */
29 function-enumerator = <0>;
[all …]
/openbmc/linux/Documentation/admin-guide/laptops/
H A Dthinkpad-acpi.rst9 - Borislav Deianov <borislav@users.sf.net>
10 - Henrique de Moraes Holschuh <hmh@hmh.eng.br>
12 http://ibm-acpi.sf.net/
19 This driver used to be named ibm-acpi until kernel 2.6.21 and release
20 0.13-20070314. It used to be in the drivers/acpi tree, but it was
21 moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
25 The driver is named "thinkpad-acpi". In some places, like module
29 "tpacpi" is used as a shorthand where "thinkpad-acpi" would be too
33 ------
38 - Fn key combinations
[all …]
/openbmc/linux/arch/arm/boot/dts/marvell/
H A Darmada-385-turris-omnia.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
8 * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
11 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/leds/common.h>
16 #include "armada-385.dtsi"
20 compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
23 stdout-path = &uart0;
[all …]
H A Dkirkwood-dir665.dts1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
10 #include "kirkwood-6281.dtsi"
13 model = "D-Link DIR-665";
14 compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
23 stdout-path = &uart0;
27 pinctrl: pin-controller@10000 {
28 pinctrl-0 =< &pmx_led_usb
35 pinctrl-names = "default";
37 pmx_led_usb: pmx-led-usb {
[all …]
H A Dkirkwood-4i-edge-200.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
8 /dts-v1/;
11 #include "kirkwood-6281.dtsi"
12 #include <dt-bindings/leds/common.h>
16 compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
25 stdout-path = &uart0;
29 compatible = "gpio-leds";
30 pinctrl-0 = <&pmx_led>;
31 pinctrl-names = "default";
[all …]
H A Dorion5x-netgear-wnr854t.dts1 // SPDX-License-Identifier: GPL-2.0-only
4 /dts-v1/;
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include "orion5x-mv88f5181.dtsi"
11 model = "Netgear WNR854-t";
12 compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
24 stdout-path = "serial0:115200n8";
33 gpio-keys {
34 compatible = "gpio-keys";
[all …]
/openbmc/u-boot/arch/mips/dts/
H A Dsfr,nb4-ser.dts1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 compatible = "sfr,nb4-ser", "brcm,bcm6358";
19 stdout-path = "serial0:115200n8";
22 gpio-leds {
23 compatible = "gpio-leds";
26 label = "NB4-SER:white:traffic";
31 label = "NB4-SER:blue:service";
36 label = "NB4-SER:white:wifi";
41 label = "NB4-SER:red:service";
[all …]
/openbmc/linux/arch/sparc/include/asm/
H A Dfhc.h1 /* SPDX-License-Identifier: GPL-2.0 */
20 #define CLOCK_CTRL_LLED 0x04 /* Left LED, 0 == on */
21 #define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */
22 #define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */
44 #define FHC_CONTROL_DCD 0x00008000 /* DC-->DC Converter Disable */
47 #define FHC_CONTROL_AOFF 0x00001000 /* CPU A SRAM/SBD Low Power Mode */
48 #define FHC_CONTROL_BOFF 0x00000800 /* CPU B SRAM/SBD Low Power Mode */
52 #define FHC_CONTROL_LLED 0x00000040 /* 0=Left LED ON */
53 #define FHC_CONTROL_MLED 0x00000020 /* 1=Middle LED ON */
54 #define FHC_CONTROL_RLED 0x00000010 /* 1=Right LED */
[all …]
/openbmc/linux/arch/arm64/boot/dts/hisilicon/
H A Dhi3660-hikey960.dts1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
12 #include "hikey960-pinctrl.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
16 #include <dt-bindings/usb/pd.h>
20 compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
35 stdout-path = "serial6:115200n8";
44 reserved-memory {
[all …]
/openbmc/linux/Documentation/devicetree/bindings/net/dsa/
H A Dqca8k.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - John Crispin <john@phrozen.org>
13 If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
16 ID. To declare the internal mdio-bus configuration, declare an MDIO node in
18 PHY it is connected to. In this config, an internal mdio-bus is registered and
20 mdio-bus configurations are not supported by the hardware.
27 - enum:
28 - qca,qca8327
[all …]
H A Dmediatek,mt7530.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Arınç ÜNAL <arinc.unal@arinc9.com>
11 - Landen Chao <Landen.Chao@mediatek.com>
12 - DENG Qingfang <dqfext@gmail.com>
13 - Sean Wang <sean.wang@mediatek.com>
14 - Daniel Golle <daniel@makrotopia.org>
17 There are three versions of MT7530, standalone, in a multi-chip module and
18 built-into a SoC.
[all …]
/openbmc/u-boot/drivers/net/phy/
H A Dmarvell.c1 // SPDX-License-Identifier: GPL-2.0+
5 * Copyright 2010-2011 Freescale Semiconductor, Inc.
28 /* 88E1111 PHY LED Control Register */
55 /* 88E1121 PHY LED Control Register */
149 /* Parse the 88E1011's status register for speed and duplex
154 unsigned int speed; in m88e1xxx_parse_status() local
168 phydev->link = 0; in m88e1xxx_parse_status()
169 return -ETIMEDOUT; in m88e1xxx_parse_status()
182 phydev->link = 1; in m88e1xxx_parse_status()
184 phydev->link = 0; in m88e1xxx_parse_status()
[all …]
/openbmc/u-boot/board/LaCie/net2big_v2/
H A Dnet2big_v2.c1 // SPDX-License-Identifier: GPL-2.0+
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
15 #include <asm/mach-types.h>
23 #include "../common/cpld-gpio-bus.h"
33 /* Multi-Purpose Pins Functionality configuration */ in board_early_init_f()
40 MPP7_GPO, /* Request power-off */ in board_early_init_f()
52 MPP24_GPIO, /* USB mode select */ in board_early_init_f()
57 MPP35_GPIO, /* Inhibit switch power-off */ in board_early_init_f()
78 gd->bd->bi_arch_number = MACH_TYPE_NET2BIG_V2; in board_init()
81 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; in board_init()
[all …]
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3399-ficus.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 /dts-v1/;
10 #include "rk3399-rock960.dtsi"
17 stdout-path = "serial2:1500000n8";
20 clkin_gmac: external-gmac-clock {
21 compatible = "fixed-clock";
22 clock-frequency = <125000000>;
23 clock-output-names = "clkin_gmac";
24 #clock-cells = <0>;
28 compatible = "gpio-leds";
[all …]
/openbmc/linux/drivers/net/phy/
H A DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
32 bool "Support LED triggers for tracking link state"
35 Adds support for a set of LED trigger events per-PHY. Link
37 LED class driver. There are triggers for each link speed currently
39 logical-or of all the link speed ones.
41 <mii bus id>:<phy>:<speed>
43 Where speed is in the form:
44 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
45 for any speed known to the PHY.
51 When LED class support is enabled, phylib can automatically
[all …]
/openbmc/u-boot/board/LaCie/netspace_v2/
H A Dnetspace_v2.c1 // SPDX-License-Identifier: GPL-2.0+
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
14 #include <asm/mach-types.h>
31 /* Multi-Purpose Pins Functionality configuration */ in board_early_init_f()
40 MPP7_GPO, /* Fan speed (bit 1) */ in board_early_init_f()
45 MPP12_GPO, /* Red led */ in board_early_init_f()
53 MPP22_GPIO, /* Fan speed (bit 0) */ in board_early_init_f()
55 MPP24_GPIO, /* USB mode select */ in board_early_init_f()
57 MPP26_GPIO, /* USB vbus-in detection */ in board_early_init_f()
58 MPP28_GPIO, /* USB enable vbus-out */ in board_early_init_f()
[all …]
/openbmc/linux/Documentation/devicetree/bindings/net/
H A Dethernet-controller.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David S. Miller <davem@davemloft.net>
20 local-mac-address:
23 $ref: /schemas/types.yaml#/definitions/uint8-array
27 mac-address:
32 local-mac-address property.
33 $ref: /schemas/types.yaml#/definitions/uint8-array
[all …]
/openbmc/linux/drivers/net/ethernet/intel/e1000e/
H A Dmac.c1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
7 * e1000e_get_bus_info_pcie - Get PCIe bus information
12 * bus speed, bus width, type (PCIe), and PCIe function.
16 struct e1000_mac_info *mac = &hw->mac; in e1000e_get_bus_info_pcie()
17 struct e1000_bus_info *bus = &hw->bus; in e1000e_get_bus_info_pcie()
18 struct e1000_adapter *adapter = hw->adapter; in e1000e_get_bus_info_pcie()
21 cap_offset = adapter->pdev->pcie_cap; in e1000e_get_bus_info_pcie()
23 bus->width = e1000_bus_width_unknown; in e1000e_get_bus_info_pcie()
25 pci_read_config_word(adapter->pdev, in e1000e_get_bus_info_pcie()
[all …]
/openbmc/linux/drivers/pci/hotplug/
H A Dshpchp_ctrl.c1 // SPDX-License-Identifier: GPL-2.0+
6 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
8 * Copyright (C) 2003-2004 Intel Corporation
34 return -ENOMEM; in queue_interrupt_event()
36 info->event_type = event_type; in queue_interrupt_event()
37 info->p_slot = p_slot; in queue_interrupt_event()
38 INIT_WORK(&info->work, interrupt_event_handler); in queue_interrupt_event()
40 queue_work(p_slot->wq, &info->work); in queue_interrupt_event()
53 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); in shpchp_handle_attention_button()
54 p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); in shpchp_handle_attention_button()
[all …]

12345678910>>...18