| /openbmc/linux/drivers/gpu/drm/amd/amdgpu/ |
| H A D | amdgpu_doorbell_mgr.c | 28 * amdgpu_mm_rdoorbell - read a doorbell dword
31 * @index: doorbell index
33 * Returns the value in the doorbell aperture at the
34 * requested doorbell index (CIK).
41 if (index < adev->doorbell.num_kernel_doorbells) in amdgpu_mm_rdoorbell()
42 return readl(adev->doorbell.cpu_addr + index); in amdgpu_mm_rdoorbell()
44 DRM_ERROR("reading beyond doorbell aperture: 0x%08x!\n", index); in amdgpu_mm_rdoorbell()
49 * amdgpu_mm_wdoorbell - write a doorbell dword
52 * @index: doorbell index
55 * Writes @v to the doorbell aperture at the
[all …]
|
| H A D | amdgpu_doorbell.h | 28 * GPU doorbell structures, functions & helpers
31 /* doorbell mmio */
46 * KFD can use all the rest in the 2M doorbell bar.
47 * For asic before vega10, doorbell is 32-bit, so the
48 * index/offset is in dword. For vega10 and after, doorbell
92 /* Per engine SDMA doorbell size in dword */
94 /* Per xcc doorbell size for KIQ/KCQ */
147 * overlap the doorbell assignment with VCN as they are mutually exclusive
148 * VCN engine's doorbell is 32 bit and two VCN ring share one QWORD
216 * overlap the doorbell assignment with VCN as they are mutually exclusive
[all …]
|
| H A D | amdgpu_amdkfd.c | 80 * amdgpu_doorbell_get_kfd_info - Report doorbell configuration required to
84 * @aperture_base: output returning doorbell aperture base physical address
85 * @aperture_size: output returning doorbell aperture size in bytes
86 * @start_offset: output returning # of doorbell bytes reserved for amdgpu.
88 * amdgpu and amdkfd share the doorbell aperture. amdgpu sets it up,
90 * amdgpu reserved doorbells are at the start of the doorbell aperture.
106 * doorbell space. in amdgpu_doorbell_get_kfd_info()
108 *aperture_base = adev->doorbell.base; in amdgpu_doorbell_get_kfd_info()
111 } else if (adev->doorbell.size > adev->doorbell.num_kernel_doorbells * in amdgpu_doorbell_get_kfd_info()
113 *aperture_base = adev->doorbell.base; in amdgpu_doorbell_get_kfd_info()
[all …]
|
| /openbmc/linux/drivers/mailbox/ |
| H A D | arm_mhu_db.c | 49 * @pchan: Physical channel within which this doorbell resides in
50 * @doorbell: doorbell number pertaining to this channel
55 unsigned int doorbell; member
60 unsigned int doorbell) in mhu_db_mbox_to_channel() argument
68 chan_info->doorbell == doorbell) in mhu_db_mbox_to_channel()
80 writel_relaxed(BIT(chan_info->doorbell), base + INTR_CLR_OFS); in mhu_db_mbox_clear_irq()
97 unsigned int doorbell; in mhu_db_mbox_irq_to_channel() local
108 for (doorbell = 0; bits; doorbell++) { in mhu_db_mbox_irq_to_channel()
109 if (!test_and_clear_bit(doorbell, &bits)) in mhu_db_mbox_irq_to_channel()
112 chan = mhu_db_mbox_to_channel(mbox, pchan, doorbell); in mhu_db_mbox_irq_to_channel()
[all …]
|
| H A D | arm_mhuv2.c | 10 * protocol modes: data-transfer and doorbell, to be used on those channel
150 DOORBELL = 0, enumerator
224 * @doorbell: Doorbell bit number within the ch_wn_idx window, only relevant
225 * in DOORBELL protocol.
226 * @pending: Flag indicating pending doorbell interrupt, only relevant in
227 * DOORBELL protocol.
235 u32 doorbell; member
259 /* =================== Doorbell transport protocol operations =============== */
265 writel_relaxed(BIT(priv->doorbell), in mhuv2_doorbell_rx_startup()
275 writel_relaxed(BIT(priv->doorbell), in mhuv2_doorbell_rx_shutdown()
[all …]
|
| /openbmc/linux/drivers/gpu/drm/amd/amdkfd/ |
| H A D | kfd_doorbell.c | 32 * kernel queues using the first doorbell page reserved for the kernel.
36 * Each device exposes a doorbell aperture, a PCI MMIO aperture that
41 * We map the doorbell address space into user-mode when a process creates
49 /* # of doorbell bytes allocated for each process. */
61 /* Doorbell calculations for device init. */
68 * Todo: KFD kernel level operations need only one doorbell for in kfd_doorbell_init()
70 * kernel, reserve and consume a doorbell from existing KGD kernel in kfd_doorbell_init()
71 * doorbell page. in kfd_doorbell_init()
77 DRM_ERROR("Failed to allocate kernel doorbell bitmap\n"); in kfd_doorbell_init()
81 /* Alloc a doorbell page for KFD kernel usages */ in kfd_doorbell_init()
[all …]
|
| /openbmc/linux/drivers/fpga/ |
| H A D | intel-m10-bmc-sec-update.c | 262 static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell) in log_error_regs() argument
267 dev_err(sec->dev, "Doorbell: 0x%08x\n", doorbell); in log_error_regs()
276 u32 doorbell; in m10bmc_sec_n3000_rsu_status() local
279 ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell); in m10bmc_sec_n3000_rsu_status()
283 return FIELD_GET(DRBL_RSU_STATUS, doorbell); in m10bmc_sec_n3000_rsu_status()
327 ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell_reg); in m10bmc_sec_progress_status()
344 u32 doorbell; in rsu_check_idle() local
347 ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell); in rsu_check_idle()
351 if (!rsu_progress_done(rsu_prog(doorbell))) { in rsu_check_idle()
352 log_error_regs(sec, doorbell); in rsu_check_idle()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mailbox/ |
| H A D | arm,mhu.yaml | 21 The MHU hardware also allows operations in doorbell mode. The MHU drives the
28 interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
38 - arm,mhu-doorbell
50 - description: Doorbell mode
52 - const: arm,mhu-doorbell
76 Set to 2 in doorbell mode and represents index of the channel and doorbell
121 # Doorbell mode.
129 compatible = "arm,mhu-doorbell", "arm,primecell";
142 mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */
143 <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */
[all …]
|
| H A D | arm,mhuv2.yaml | 36 - Doorbell: Each transfer is made up of single bit flag, using any one of the
38 and the entire window shall be used in doorbell protocol. Optionally, data
97 for doorbell protocol, and 1 is reserved for data-transfer protocol.
102 doorbell protocol this field signifies the number of 32-bit channel
103 windows that implement the doorbell protocol. For data-transfer protocol,
119 windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and
135 doorbell, or data-transfer protocol, and the second argument (only
136 relevant in doorbell protocol, should be 0 otherwise) represents the
137 doorbell number within the 32 bit wide channel window.
142 mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5.
[all …]
|
| /openbmc/linux/drivers/accel/qaic/ |
| H A D | mhi_controller.c | 33 .doorbell = MHI_DB_BRST_DISABLE,
49 .doorbell = MHI_DB_BRST_DISABLE,
65 .doorbell = MHI_DB_BRST_DISABLE,
81 .doorbell = MHI_DB_BRST_DISABLE,
97 .doorbell = MHI_DB_BRST_DISABLE,
113 .doorbell = MHI_DB_BRST_DISABLE,
129 .doorbell = MHI_DB_BRST_DISABLE,
145 .doorbell = MHI_DB_BRST_DISABLE,
161 .doorbell = MHI_DB_BRST_DISABLE,
177 .doorbell = MHI_DB_BRST_DISABLE,
[all …]
|
| /openbmc/linux/include/linux/ |
| H A D | ntb.h | 358 /* Doorbell operations are mostly required */ in ntb_dev_ops_is_valid()
524 * ntb_db_event() - notify driver context of a doorbell event
528 * Notify the driver context of a doorbell event. If hardware supports
533 * doorbell bits need service, and ntb_db_vector_mask() to determine which of
970 * ntb_db_is_unsafe() - check if it is safe to use hardware doorbell
988 * ntb_db_valid_mask() - get a mask of doorbell bits supported by the ntb
991 * Hardware may support different number or arrangement of doorbell bits.
993 * Return: A mask of doorbell bits supported by the ntb.
1001 * ntb_db_vector_count() - get the number of doorbell interrupt vectors
1006 * Return: The number of doorbell interrupt vectors.
[all …]
|
| /openbmc/linux/Documentation/driver-api/ |
| H A D | ntb.rst | 7 fabric. Existing NTB hardware supports a common feature set: doorbell
14 peer. Doorbell registers provide a way for peers to send interrupt events.
138 The Ping Pong test client serves as a demonstration to exercise the doorbell
141 then proceeds to read and write the doorbell scratchpad registers of the NTB.
142 The peers interrupt each other using a bit mask of doorbell bits, which is
143 shifted by one in each round, to test the behavior of multiple doorbell bits
146 round before writing the peer doorbell register.
150 * unsafe - Some hardware has known issues with scratchpad and doorbell
154 * delay\_ms - Specify the delay between receiving a doorbell
155 interrupt event and setting the peer doorbell register for the next
[all …]
|
| /openbmc/linux/drivers/misc/vmw_vmci/ |
| H A D | vmci_doorbell.c | 30 * DoorbellEntry describes the a doorbell notification handle allocated by the
80 * with a given doorbell handle. For guest endpoints, the
116 * Find doorbell entry by bitmap index.
225 * Creates a link between the given doorbell handle and the given
244 * Unlinks the given doorbell handle from an index in the bitmap in
290 * Dispatches a doorbell notification to the host context.
298 pr_devel("Notifying an invalid doorbell (handle=0x%x:0x%x)\n", in vmci_dbell_host_context_notify()
306 pr_devel("Notifying an unknown doorbell (handle=0x%x:0x%x)\n", in vmci_dbell_host_context_notify()
393 * vmci_doorbell_create() - Creates a doorbell
397 * @notify_cb: The callback to be ivoked when the doorbell fires.
[all …]
|
| /openbmc/linux/Documentation/PCI/endpoint/ |
| H A D | pci-ntb-function.rst | 54 4) Doorbell (DB) Registers
113 CMD_CONFIGURE_DOORBELL (0x1): Command to configure doorbell. Before
117 the outbound ATU such that transactions to Doorbell BAR will be routed
154 Memory Window 1 and Doorbell registers are packed together in the
155 same BAR. The initial portion of the region will have doorbell
178 in order to raise doorbell. EPF NTB can use either MSI or MSI-X to
179 ring doorbell (MSI-X support will be added later). MSI uses same
192 will ensure there is no difference while raising the doorbell.
198 for raising doorbell interrupt. This will be populated by EPF NTB
213 Doorbell Registers:
[all …]
|
| /openbmc/linux/drivers/virt/ |
| H A D | fsl_hypervisor.c | 19 * shutdown doorbell from a manager partition.
313 * Ring a doorbell
323 param.ret = ev_doorbell_send(param.doorbell); in ioctl_doorbell()
459 /* The size of the doorbell event queue. This must be a power of two. */
482 uint32_t doorbell; /* The doorbell handle */ member
487 * Add a doorbell to all of the doorbell queues
489 static void fsl_hv_queue_doorbell(uint32_t doorbell) in fsl_hv_queue_doorbell() argument
499 dbq->q[dbq->tail] = doorbell; in fsl_hv_queue_doorbell()
516 * We use the same interrupt handler for all doorbells. Whenever a doorbell
518 * doorbell (passed to us as *data) into all of the queues.
[all …]
|
| /openbmc/linux/drivers/scsi/esas2r/ |
| H A D | esas2r_int.c | 48 static void esas2r_doorbell_interrupt(struct esas2r_adapter *a, u32 doorbell);
59 u32 doorbell; in esas2r_polled_interrupt() local
76 doorbell = esas2r_read_register_dword(a, MU_DOORBELL_OUT); in esas2r_polled_interrupt()
77 if (doorbell != 0) in esas2r_polled_interrupt()
78 esas2r_doorbell_interrupt(a, doorbell); in esas2r_polled_interrupt()
107 u32 doorbell; in esas2r_adapter_interrupt() local
118 doorbell = esas2r_read_register_dword(a, MU_DOORBELL_OUT); in esas2r_adapter_interrupt()
119 if (doorbell != 0) in esas2r_adapter_interrupt()
120 esas2r_doorbell_interrupt(a, doorbell); in esas2r_adapter_interrupt()
135 u32 doorbell; in esas2r_msi_interrupt() local
[all …]
|
| /openbmc/linux/arch/powerpc/include/asm/ |
| H A D | dbell.h | 25 PPC_DBELL = 0, /* doorbell */
26 PPC_DBELL_CRIT = 1, /* critical doorbell */
27 PPC_G_DBELL = 2, /* guest doorbell */
28 PPC_G_DBELL_CRIT = 3, /* guest critical doorbell */
29 PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */
30 PPC_DBELL_SERVER = 5, /* doorbell on server */
141 * Attempt to cause a core doorbell if destination is on the same core.
|
| /openbmc/linux/drivers/net/wwan/iosm/ |
| H A D | iosm_ipc_pm.h | 9 /* Trigger the doorbell interrupt on cp to change the PM sleep/active status */
13 /* Trigger the doorbell interrupt on CP to do hpda update */
65 * and DOORBELL-IRQ-HPDA(data) values.
68 * @IPC_MEM_DEV_PM_WAKEUP: DOORBELL-IRQ-DEVICE_WAKE(data).
69 * @IPC_MEM_DEV_PM_HOST_SLEEP: DOORBELL-IRQ-HOST_SLEEP(data).
71 * @IPC_MEM_DEV_PM_FORCE_SLEEP: DOORBELL-IRQ-FORCE_SLEEP.
72 * @IPC_MEM_DEV_PM_FORCE_ACTIVE: DOORBELL-IRQ-FORCE_ACTIVE.
190 * update then only doorbell is triggered otherwise pending
|
| /openbmc/linux/include/linux/mlx4/ |
| H A D | cq.h | 40 #include <linux/mlx4/doorbell.h>
151 __be32 doorbell[2]; in mlx4_cq_arm() local
161 * Make sure that the doorbell record in host memory is in mlx4_cq_arm()
162 * written before ringing the doorbell via PCI MMIO. in mlx4_cq_arm()
166 doorbell[0] = cpu_to_be32(sn << 28 | cmd | cq->cqn); in mlx4_cq_arm()
167 doorbell[1] = cpu_to_be32(ci); in mlx4_cq_arm()
169 mlx4_write64(doorbell, uar_page + MLX4_CQ_DOORBELL, doorbell_lock); in mlx4_cq_arm()
|
| /openbmc/linux/drivers/pci/endpoint/functions/ |
| H A D | pci-epf-ntb.c | 183 * | BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
185 * | BAR1 | | | Doorbell 2 +---------+ | |
187 * | BAR2 | | Doorbell 3 +-------+ | +-----------------+
189 * | BAR3 | | | Doorbell 4 +-----+ | +-----------------+
230 * Please note Memory window1 (MW1) and Doorbell registers together will be
326 * @db_count: Number of doorbell interrupts to map
329 *| BAR0 | | | Doorbell 1 +---+-------> MSI ADDRESS |
331 *| BAR1 | | | Doorbell 2 +---+ | |
333 *| BAR2 | | Doorbell 3 +---+ | |
335 *| BAR3 | | | Doorbell 4 +---+ | |
[all …]
|
| /openbmc/linux/include/uapi/rdma/ |
| H A D | qedr-abi.h | 141 /* address of SQ doorbell recovery user entry */
144 /* address of RQ doorbell recovery user entry */
166 /* doorbell recovery entry allocated and populated by userspace doorbelling
167 * entities and mapped to kernel. Kernel uses this to register doorbell
168 * information with doorbell drop recovery mechanism.
171 __aligned_u64 db_data; /* doorbell data */
|
| /openbmc/linux/Documentation/devicetree/bindings/powerpc/fsl/ |
| H A D | srio-rmu.txt | 23 and doorbell units.
33 (msg-unit, doorbell, port-write).
54 and doorbell units.
68 Doorbell Unit:
84 and doorbell units.
114 and doorbell units.
151 doorbell-unit@400 {
|
| /openbmc/linux/drivers/gpu/drm/radeon/ |
| H A D | radeon_device.c | 328 * GPU doorbell aperture helpers function.
331 * radeon_doorbell_init - Init doorbell driver information.
335 * Init doorbell driver information (CIK)
340 /* doorbell bar mapping */ in radeon_doorbell_init()
341 rdev->doorbell.base = pci_resource_start(rdev->pdev, 2); in radeon_doorbell_init()
342 rdev->doorbell.size = pci_resource_len(rdev->pdev, 2); in radeon_doorbell_init()
344 rdev->doorbell.num_doorbells = min_t(u32, rdev->doorbell.size / sizeof(u32), RADEON_MAX_DOORBELLS); in radeon_doorbell_init()
345 if (rdev->doorbell.num_doorbells == 0) in radeon_doorbell_init()
348 rdev->doorbell.ptr = ioremap(rdev->doorbell.base, rdev->doorbell.num_doorbells * sizeof(u32)); in radeon_doorbell_init()
349 if (rdev->doorbell.ptr == NULL) { in radeon_doorbell_init()
[all …]
|
| /openbmc/linux/include/linux/mlx5/ |
| H A D | cq.h | 155 __be32 doorbell[2]; in mlx5_cq_arm() local
164 /* Make sure that the doorbell record in host memory is in mlx5_cq_arm()
165 * written before ringing the doorbell via PCI MMIO. in mlx5_cq_arm()
169 doorbell[0] = cpu_to_be32(sn << 28 | cmd | ci); in mlx5_cq_arm()
170 doorbell[1] = cpu_to_be32(cq->cqn); in mlx5_cq_arm()
172 mlx5_write64(doorbell, uar_page + MLX5_CQ_DOORBELL); in mlx5_cq_arm()
|
| /openbmc/linux/drivers/accel/ivpu/ |
| H A D | vpu_jsm_api.h | 227 * Register a doorbell to notify VPU of new work. The doorbell may later be
334 * @brief Register doorbell command structure.
335 * This structure supports doorbell registration for only OS scheduling.
339 /* Index of the doorbell to register. */
347 /* Host sub-stream ID for the context assigned to the doorbell. */
352 * @brief Unregister doorbell command structure.
353 * Request structure to unregister a doorbell for both HW and OS scheduling.
357 /* Index of the doorbell to unregister. */
488 /* Index of the doorbell to which the job was submitted */
531 * Response structure for register doorbell command for both OS
[all …]
|