/openbmc/linux/Documentation/devicetree/bindings/memory-controllers/ |
H A D | ti,gpmc-child.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Tony Lindgren <tony@atomide.com> 11 - Roger Quadros <rogerq@kernel.org> 24 gpmc,sync-clk-ps: 28 # Chip-select signal timings corresponding to GPMC_CONFIG2: 29 gpmc,cs-on-ns: 33 gpmc,cs-rd-off-ns: [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap2430-sdp.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; 20 clock-frequency = <100000>; 31 vmmc-supply = <&vmmc1>; 32 bus-width = <4>; 39 interrupt-parent = <&gpio5>; 42 bank-width = <2>; 43 gpmc,sync-clk-ps = <0>; [all …]
|
H A D | omap2420-n8x0-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 11 stdout-path = &uart3; 16 compatible = "i2c-cbus-gpio"; 17 gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ 21 #address-cells = <1>; 22 #size-cells = <0>; 25 interrupt-parent = <&gpio4>; 34 clock-frequency = <400000>; 44 clock-frequency = <400000>; 50 /* gpio-irq for dma: 26 */ [all …]
|
H A D | omap-gpmc-smsc911x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 10 vddvario: regulator-vddvario { 11 compatible = "regulator-fixed"; 12 regulator-name = "vddvario"; 13 regulator-always-on; 16 vdd33a: regulator-vdd33a { 17 compatible = "regulator-fixed"; 18 regulator-name = "vdd33a"; 19 regulator-always-on; 26 bank-width = <2>; [all …]
|
H A D | omap3-gta04a5one.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> 6 #include "omap3-gta04a5.dts" 13 gpmc_pins: gpmc-pins { 14 pinctrl-single,pins = < 45 pinctrl-names = "default"; 46 pinctrl-0 = <&gpmc_pins>; 48 /delete-node/ nand@0,0; 52 #address-cells = <1>; 53 #size-cells = <1>; [all …]
|
H A D | dm8148-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 2 /dts-v1/; 5 #include <dt-bindings/interrupt-controller/irq.h> 9 compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814"; 18 compatible = "regulator-fixed"; 19 regulator-name = "vmmcsd_fixed"; 20 regulator-min-microvolt = <3300000>; 21 regulator-max-microvolt = <3300000>; 26 phy-handle = <ðphy0>; 27 phy-mode = "rgmii-id"; [all …]
|
H A D | dra62x-j5eco-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 2 /dts-v1/; 5 #include <dt-bindings/interrupt-controller/irq.h> 9 compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814"; 18 compatible = "regulator-fixed"; 19 regulator-name = "vmmcsd_fixed"; 20 regulator-min-microvolt = <3300000>; 21 regulator-max-microvolt = <3300000>; 26 phy-handle = <ðphy0>; 27 phy-mode = "rgmii-id"; [all …]
|
H A D | omap4-duovero-parlor.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 /dts-v1/; 7 #include "omap4-duovero.dtsi" 9 #include <dt-bindings/input/input.h> 13 compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; 20 compatible = "gpio-leds"; 24 linux,default-trigger = "heartbeat"; 29 compatible = "gpio-keys"; 30 #address-cells = <1>; 31 #size-cells = <0>; [all …]
|
H A D | am335x-chilisom.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ 7 #include <dt-bindings/interrupt-controller/irq.h> 11 compatible = "grinn,am335x-chilisom", "ti,am33xx"; 15 cpu0-supply = <&dcdc2_reg>; 26 pinctrl-names = "default"; 28 i2c0_pins: i2c0-pins { 29 pinctrl-single,pins = < 35 nandflash_pins: nandflash-pins { 36 pinctrl-single,pins = < [all …]
|
H A D | omap-zoom-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include "omap-gpmc-smsc911x.dtsi" 20 bank-width = <2>; 21 reg-shift = <1>; 22 reg-io-width = <1>; 23 interrupt-parent = <&gpio4>; 25 clock-frequency = <1843200>; 26 current-speed = <115200>; 27 gpmc,mux-add-data = <0>; 28 gpmc,device-width = <1>; [all …]
|
H A D | omap3-sb-t35.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 10 powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ 12 pinctrl-names = "default"; 13 pinctrl-0 = <&tfp410_pins>; 16 #address-cells = <1>; 17 #size-cells = <0>; 23 remote-endpoint = <&dpi_out>; 31 remote-endpoint = <&dvi_connector_in>; 37 dvi0: dvi-connector { [all …]
|
H A D | omap3-igep.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 /dts-v1/; 19 stdout-path = &uart3; 23 compatible = "ti,omap-twl4030"; 28 vdd33: regulator-vdd33 { 29 compatible = "regulator-fixed"; 30 regulator-name = "vdd33"; 31 regulator-always-on; 37 gpmc_pins: gpmc-pins { 38 pinctrl-single,pins = < [all …]
|
H A D | am335x-myirtech-myc.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ 5 /* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ 7 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/leds/common.h> 15 model = "MYIR MYC-AM335X"; 16 compatible = "myir,myc-am335x", "ti,am33xx"; 20 cpu0-supply = <&vdd_core>; 21 voltage-tolerance = <2>; [all …]
|
H A D | am335x-igep0033.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x 5 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz 8 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 16 cpu0-supply = <&vdd1_reg>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&leds_pins>; 29 compatible = "gpio-leds"; 34 default-state = "on"; [all …]
|
H A D | dm8168-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 2 /dts-v1/; 5 #include <dt-bindings/interrupt-controller/irq.h> 9 compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816"; 19 compatible = "regulator-fixed"; 20 regulator-name = "vmmcsd_fixed"; 21 regulator-min-microvolt = <3300000>; 22 regulator-max-microvolt = <3300000>; 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; [all …]
|
H A D | am335x-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <dt-bindings/interrupt-controller/irq.h> 12 compatible = "phytec,am335x-phycore-som", "ti,am33xx"; 22 cpu0-supply = <&vdd1_reg>; 32 compatible = "regulator-fixed"; 33 regulator-name = "vcc5v"; 34 regulator-min-microvolt = <5000000>; 35 regulator-max-microvolt = <5000000>; 36 regulator-boot-on; 37 regulator-always-on; [all …]
|
H A D | omap3-devkit8000-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 6 #include <dt-bindings/input/input.h> 16 compatible = "gpio-leds"; 18 led-heartbeat { 20 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ 21 default-state = "on"; 22 linux,default-trigger = "heartbeat"; 25 led-mmc { 27 gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ 28 default-state = "on"; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | omap-gpmc-smsc911x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 10 vddvario: regulator-vddvario { 11 compatible = "regulator-fixed"; 12 regulator-name = "vddvario"; 13 regulator-always-on; 16 vdd33a: regulator-vdd33a { 17 compatible = "regulator-fixed"; 18 regulator-name = "vdd33a"; 19 regulator-always-on; 26 bank-width = <2>; [all …]
|
H A D | am335x-draco.dtsi | 4 * Copyright (C) 2013,2014 - Stefan Roese <sr@denx.de> 13 stdout-path = &uart0; 14 tick-timer = &timer2; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&uart0_pins>; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&i2c0_pins>; 34 clock-frequency = <400000>; 50 usb-phy@47401300 { 54 usb-phy@47401b00 { [all …]
|
H A D | am335x-chilisom.dtsi | 2 * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ 10 #include <dt-bindings/interrupt-controller/irq.h> 14 compatible = "grinn,am335x-chilisom", "ti,am33xx"; 18 cpu0-supply = <&dcdc2_reg>; 29 pinctrl-names = "default"; 32 pinctrl-single,pins = < 39 pinctrl-single,pins = < 60 pinctrl-names = "default"; 61 pinctrl-0 = <&i2c0_pins>; 64 clock-frequency = <400000>; [all …]
|
H A D | dm8168-evm.dts | 6 /dts-v1/; 9 #include <dt-bindings/interrupt-controller/irq.h> 13 compatible = "ti,dm8168-evm", "ti,dm8168"; 23 compatible = "regulator-fixed"; 24 regulator-name = "vmmcsd_fixed"; 25 regulator-min-microvolt = <3300000>; 26 regulator-max-microvolt = <3300000>; 32 pinctrl-single,pins = < 41 pinctrl-single,pins = < 55 pinctrl-single,pins = < [all …]
|
H A D | omap3-igep.dtsi | 11 /dts-v1/; 22 stdout-path = &uart3; 26 compatible = "ti,omap-twl4030"; 31 vdd33: regulator-vdd33 { 32 compatible = "regulator-fixed"; 33 regulator-name = "vdd33"; 34 regulator-always-on; 41 pinctrl-single,pins = < 48 pinctrl-single,pins = < 55 pinctrl-single,pins = < [all …]
|
H A D | am335x-igep0033.dtsi | 2 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x 4 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz 11 /dts-v1/; 14 #include <dt-bindings/interrupt-controller/irq.h> 19 cpu0-supply = <&vdd1_reg>; 29 pinctrl-names = "default"; 30 pinctrl-0 = <&leds_pins>; 32 compatible = "gpio-leds"; 37 default-state = "on"; 42 compatible = "regulator-fixed"; [all …]
|
H A D | am335x-brppt1-nand.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * http://www.br-automation.com 7 /dts-v1/; 15 fset: factory-settings { 16 bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890"; 18 order-no = "6PPT30 (NAND)"; 19 hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890"; 20 serial-no = "0"; 21 device-id = <0x0>; 22 parent-id = <0x0>; [all …]
|
H A D | am335x-baltos.dts | 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 14 /dts-v1/; 17 #include <dt-bindings/pwm/pwm.h> 24 stdout-path = &uart0; 29 cpu0-supply = <&vdd1_reg>; 34 compatible = "regulator-fixed"; 35 regulator-name = "vbat"; 36 regulator-min-microvolt = <5000000>; 37 regulator-max-microvolt = <5000000>; 38 regulator-boot-on; [all …]
|