Home
last modified time | relevance | path

Searched +full:bus +full:- +full:range +full:- +full:microvolt (Results 1 – 25 of 95) sorted by relevance

1234

/openbmc/linux/Documentation/devicetree/bindings/hwmon/
H A Dti,tmp513.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Eric Tremblay <etremblay@distech-controls.com>
14 The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors
15 that include remote sensors, a local temperature sensor, and a high-side
17 remote temperatures, on-chip temperatures, and system voltage/power/current
28 - ti,tmp512
29 - ti,tmp513
34 shunt-resistor-micro-ohms:
[all …]
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-g12b-bananapi-cm4.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "meson-g12b-a311d.dtsi"
7 #include <dt-bindings/gpio/meson-g12a-gpio.h>
16 stdout-path = "serial0:115200n8";
19 emmc_pwrseq: emmc-pwrseq {
20 compatible = "mmc-pwrseq-emmc";
21 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
29 sdio_pwrseq: sdio-pwrseq {
30 compatible = "mmc-pwrseq-simple";
31 reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
[all …]
H A Dmeson-g12b-w400.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b.dtsi"
11 #include "meson-g12b-s922x.dtsi"
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/gpio/meson-g12a-gpio.h>
22 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
[all …]
H A Dmeson-g12b-bananapi.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/gpio/meson-g12a-gpio.h>
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
21 stdout-path = "serial0:115200n8";
29 adc-keys {
30 compatible = "adc-keys";
31 io-channels = <&saradc 2>;
32 io-channel-names = "buttons";
[all …]
H A Dmeson-g12b-odroid.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/gpio/meson-g12a-gpio.h>
9 #include <dt-bindings/sound/meson-g12a-toacodec.h>
10 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
20 stdout-path = "serial0:115200n8";
28 emmc_pwrseq: emmc-pwrseq {
29 compatible = "mmc-pwrseq-emmc";
30 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
33 fan: gpio-fan {
[all …]
H A Dmeson-g12b-odroid-go-ultra.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12b-s922x.dtsi"
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/gpio/meson-g12a-gpio.h>
12 #include <dt-bindings/sound/meson-g12a-toacodec.h>
13 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
16 compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
17 model = "Hardkernel ODROID-GO-Ultra";
[all …]
H A Dmeson-g12b-radxa-zero2.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
10 /dts-v1/;
12 #include "meson-g12b-a311d.dtsi"
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/gpio/meson-g12a-gpio.h>
16 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
28 stdout-path = "serial0:115200n8";
36 gpio-keys-polled {
37 compatible = "gpio-keys-polled";
[all …]
H A Dmeson-sm1-ac2xx.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
11 #include "meson-sm1.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/gpio/meson-g12a-gpio.h>
14 #include <dt-bindings/input/input.h>
23 stdout-path = "serial0:115200n8";
26 emmc_pwrseq: emmc-pwrseq {
27 compatible = "mmc-pwrseq-emmc";
28 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
31 cvbs-connector {
[all …]
H A Dmeson-g12a-u200.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/gpio/meson-g12a-gpio.h>
22 stdout-path = "serial0:115200n8";
25 cvbs-connector {
26 compatible = "composite-video-connector";
30 remote-endpoint = <&cvbs_vdac_out>;
35 emmc_pwrseq: emmc-pwrseq {
[all …]
H A Dmeson-g12a-radxa-zero.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/meson-g12a-gpio.h>
10 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
21 stdout-path = "serial0:115200n8";
29 cvbs-connector {
31 compatible = "composite-video-connector";
35 remote-endpoint = <&cvbs_vdac_out>;
40 hdmi-connector {
[all …]
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3566-anbernic-rgxx3.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/pinctrl/rockchip.h>
9 #include <dt-bindings/soc/rockchip,vop2.h>
14 stdout-path = "serial2:1500000n8";
17 adc-joystick {
18 compatible = "adc-joystick";
[all …]
H A Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
10 #include "rk3399-op1-opp.dtsi"
19 stdout-path = "serial2:115200n8";
28 * - Rails that only connect to the EC (or devices that the EC talks to)
30 * - Rails _are_ included if the rails go to the AP even if the AP
39 * - The EC controls the enable and the EC always enables a rail as
41 * - The rails are actually connected to each other by a jumper and
46 ppvar_sys: ppvar-sys {
[all …]
H A Drk3326-odroid-go2-v11.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi"
12 model = "ODROID-GO Advance Black Edition";
13 compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
19 analog_sticks: adc-joystick {
20 compatible = "adc-joystick";
21 io-channels = <&saradc 1>,
23 poll-interval = <60>;
24 #address-cells = <1>;
[all …]
/openbmc/linux/arch/arm/boot/dts/amlogic/
H A Dmeson8b-mxq.dts1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
22 stdout-path = "serial0:115200n8";
30 vcck: regulator-vcck {
31 compatible = "pwm-regulator";
33 regulator-name = "VCCK";
34 regulator-min-microvolt = <860000>;
35 regulator-max-microvolt = <1140000>;
37 pwm-supply = <&vcc_5v>;
[all …]
H A Dmeson8b-odroidc1.dts1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
12 model = "Hardkernel ODROID-C1";
13 compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
22 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
36 compatible = "gpio-leds";
[all …]
H A Dmeson8b-ec100.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
22 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
35 gpio-keys {
36 compatible = "gpio-keys-polled";
[all …]
/openbmc/linux/Documentation/hwmon/
H A Dtmp513.rst1 .. SPDX-License-Identifier: GPL-2.0
22 Eric Tremblay <etremblay@distech-controls.com>
25 -----------
28 The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors
29 that include remote sensors, a local temperature sensor, and a high-side current
31 temperatures, on-chip temperatures, and system voltage/power/current
34 The temperatures are measured in degrees Celsius with a range of
35 -40 to + 125 degrees with a resolution of 0.0625 degree C.
39 hysteresis value. The hysteresis is in degrees Celsius with a range of
44 **temp[1-4]_input**
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Dexynos5250-spring.dts1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
48 samsung,bl1-offset = <0x1400>;
49 samsung,bl2-offset = <0x3400>;
50 u-boot-memory = "/memory";
51 u-boot-offset = <0x3e00000 0x100000>;
56 #address-cells = <1>;
[all …]
H A Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
10 #include "rk3399-op1-opp.dtsi"
14 u-boot,dm-pre-reloc;
15 stdout-path = "serial2:115200n8";
16 u-boot,spl-boot-order = &spi_flash;
20 u-boot,spl-payload-offset = <0x40000>;
29 * - Rails that only connect to the EC (or devices that the EC talks to)
31 * - Rails _are_ included if the rails go to the AP even if the AP
[all …]
H A Dexynos5250-smdk5250.dts12 /dts-v1/;
14 #include <dt-bindings/interrupt-controller/irq.h>
45 srom-timing = <1 9 12 1 6 1 1>;
50 phy-mode = "mii";
55 samsung,codec-type = "wm8994";
65 u-boot,i2c-offset-len = <2>;
67 #sound-dai-cells = <1>;
72 compatible = "google,smdk5250-audio-wm8994";
74 samsung,model = "SMDK5250-I2S-WM8994";
75 samsung,audio-codec = <&wm8994>;
[all …]
H A Dsun9i-a80-cubieboard4.dts5 * Chen-Yu Tsai <wens@csie.org>
7 * This file is dual-licensed: you can use it either under the terms
46 /dts-v1/;
47 #include "sun9i-a80.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
53 compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
77 vga-connector {
78 compatible = "vga-connector";
[all …]
H A Dsun9i-a80-cx-a99.dts2 * sun9i-a80-cx-a99.dts - Device Tree file for the Sunchip CX-A99 board.
6 * This file is dual-licensed: you can use it either under the terms
46 * The Sunchip CX-A99 board is found in several similar Android media
50 * Jesurun CS-Q8 (ships with larger remote control)
55 * See the Sunchip CX-A99 page on the Linux-sunxi wiki for more information.
58 /dts-v1/;
59 #include "sun9i-a80.dtsi"
61 #include <dt-bindings/gpio/gpio.h>
64 model = "Sunchip CX-A99";
65 compatible = "sunchip,cx-a99", "allwinner,sun9i-a80";
[all …]
/openbmc/linux/arch/arm/boot/dts/arm/
H A Dvexpress-v2p-ca15-tc1.dts1 // SPDX-License-Identifier: GPL-2.0
6 * Cortex-A15 MPCore (V2P-CA15)
8 * HBI-0237A
11 /dts-v1/;
12 #include "vexpress-v2m-rs1.dtsi"
15 model = "V2P-CA15";
18 compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
19 interrupt-parent = <&gic>;
20 #address-cells = <2>;
21 #size-cells = <2>;
[all …]
H A Dvexpress-v2p-ca15_a7.dts1 // SPDX-License-Identifier: GPL-2.0
6 * Cortex-A15_A7 MPCore (V2P-CA15_A7)
8 * HBI-0249A
11 /dts-v1/;
12 #include "vexpress-v2m-rs1.dtsi"
15 model = "V2P-CA15_CA7";
18 compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
19 interrupt-parent = <&gic>;
20 #address-cells = <2>;
21 #size-cells = <2>;
[all …]
/openbmc/linux/arch/arm/boot/dts/allwinner/
H A Dsun9i-a80-cubieboard4.dts5 * Chen-Yu Tsai <wens@csie.org>
7 * This file is dual-licensed: you can use it either under the terms
46 /dts-v1/;
47 #include "sun9i-a80.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
53 compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
66 led-0 {
71 led-1 {
[all …]

1234