| /openbmc/linux/Documentation/devicetree/bindings/iio/adc/ |
| H A D | xlnx,zynqmp-ams.yaml | 15 conditions, such as temperature and supply voltage levels.
28 AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
29 |1 |Battery voltage measurement, VCC_PSBATT. |Voltage
30 |2 |PL Internal voltage measurement, VCCINT. |Voltage
31 |3 |Block RAM voltage measurement, VCCBRAM. |Voltage
32 |4 |PL Aux voltage measurement, VCCAUX. |Voltage
33 |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
34 |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
38 |9 |VCC PS LPD voltage measurement (supply1). |Voltage
39 |10 |VCC PS FPD voltage measurement (supply2). |Voltage
[all …]
|
| /openbmc/openbmc/meta-ingrasys/meta-zaius/recipes-phosphor/configuration/zaius-yaml-config/ |
| H A D | zaius-ipmi-sensors.yaml | 180 0x72: &voltage
182 path: /xyz/openbmc_project/sensors/voltage/vr0_p1v2_03_vout
253 <<: *voltage
254 path: /xyz/openbmc_project/sensors/voltage/vr0_p1v2_47_vout
265 <<: *voltage
266 path: /xyz/openbmc_project/sensors/voltage/vr0_vio_vout
277 <<: *voltage
278 path: /xyz/openbmc_project/sensors/voltage/vr0_vdd_vout
289 <<: *voltage
290 path: /xyz/openbmc_project/sensors/voltage/vr0_vcs_vout
[all …]
|
| /openbmc/linux/drivers/regulator/ |
| H A D | Kconfig | 3 bool "Voltage and Current Regulator Support"
6 Generic Voltage and Current Regulator support.
8 This framework is designed to provide a generic interface to voltage
10 provide voltage and current control to client or consumer drivers and
16 to both voltage regulators (where voltage output is controllable) and
34 tristate "Fixed voltage regulator support"
36 This driver provides support for fixed voltage regulators,
43 This driver provides a virtual consumer for the voltage and
60 tristate "Marvell 88PG86X voltage regulators"
64 This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
[all …]
|
| /openbmc/linux/arch/arm/mach-omap2/ |
| H A D | voltage.c | 3 * OMAP3/OMAP4 Voltage Management Routines
36 #include "voltage.h"
46 * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
47 * @voltdm: pointer to the voltdm for which current voltage info is needed
49 * API to get the current non-auto-compensated voltage for a voltage domain.
50 * Returns 0 in case of error else returns the current voltage.
63 * voltdm_scale() - API to scale voltage of a particular voltage domain.
64 * @voltdm: pointer to the voltage domain which is to be scaled.
65 * @target_volt: The target voltage of the voltage domain
67 * This API should be called by the kernel to do the voltage scaling
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-phosphor/inventory/phosphor-inventory-manager/ |
| H A D | associations.json | 329 "/xyz/openbmc_project/sensors/voltage/p1v8_stby",
330 "/xyz/openbmc_project/sensors/voltage/vddcr_soc_stby",
331 "/xyz/openbmc_project/sensors/voltage/p2v5_stby",
332 "/xyz/openbmc_project/sensors/voltage/p1v2_stby",
333 "/xyz/openbmc_project/sensors/voltage/p1v175_stby",
334 "/xyz/openbmc_project/sensors/voltage/p1v8",
335 "/xyz/openbmc_project/sensors/voltage/p3v3",
336 "/xyz/openbmc_project/sensors/voltage/pwrgd_pvpp",
337 "/xyz/openbmc_project/sensors/voltage/pwrgd_pvddio",
338 "/xyz/openbmc_project/sensors/voltage/pwrgd_cpuvr",
[all …]
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | ina209.rst | 24 The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side
40 in0_input shunt voltage (mV)
41 in0_input_highest shunt voltage historical maximum reading (mV)
42 in0_input_lowest shunt voltage historical minimum reading (mV)
43 in0_reset_history reset shunt voltage history
44 in0_max shunt voltage max alarm limit (mV)
45 in0_min shunt voltage min alarm limit (mV)
46 in0_crit_max shunt voltage crit max alarm limit (mV)
47 in0_crit_min shunt voltage crit min alarm limit (mV)
48 in0_max_alarm shunt voltage max alarm limit exceeded
[all …]
|
| H A D | max20751.rst | 50 in1_input Measured voltage.
51 in1_min Minimum input voltage.
52 in1_max Maximum input voltage.
53 in1_lcrit Critical minimum input voltage.
54 in1_crit Critical maximum input voltage.
55 in1_min_alarm Input voltage low alarm.
56 in1_lcrit_alarm Input voltage critical low alarm.
57 in1_min_alarm Input voltage low alarm.
58 in1_max_alarm Input voltage high alarm.
61 in2_input Measured voltage.
[all …]
|
| H A D | isl68137.rst | 407 digital multiphase voltage regulators (raa_dmpvr2). The ISL68137 is a digital
411 and 'hv' for high voltage single-rail devices. Consult the individual datasheets
425 For 2nd generation Renesas digital multiphase voltage regulators, only the
445 in1_input Measured input voltage
446 in1_lcrit Critical minimum input voltage
447 in1_lcrit_alarm Input voltage critical low alarm
448 in1_crit Critical maximum input voltage
449 in1_crit_alarm Input voltage critical high alarm
452 in[2-3]_input Measured output voltage
453 in[2-3]_lcrit Critical minimum output voltage
[all …]
|
| H A D | smsc47m192.rst | 35 These chips support 3 temperature channels and 8 voltage inputs
36 as well as CPU voltage VID input.
44 Voltages are scaled such that the nominal voltage corresponds to
46 each voltage channel is 0V ... 255/192*(nominal voltage), the resolution
47 is 1 bit per (nominal voltage)/192.
48 Both voltage and temperature values are scaled by 1000, the sys files
51 The +12V analog voltage input channel (in4_input) is multiplexed with
52 bit 4 of the encoded CPU voltage. This means that you either get
53 a +12V voltage measurement or a 5 bit CPU VID, but not both.
59 The temperature and voltage readings are updated once every 1.5 seconds.
[all …]
|
| H A D | crps.rst | 59 in1_input Measured input voltage
60 in1_crit Critical input over voltage
61 in1_crit_alarm Critical input over voltage alarm
62 in1_max Maximum input over voltage
63 in1_max_alarm Maximum input over voltage alarm
64 in1_rated_min Minimum rated input voltage
65 in1_rated_max Maximum rated input voltage
68 in2_input Measured input voltage
69 in2_crit Critical input over voltage
70 in2_crit_alarm Critical input over voltage alarm
[all …]
|
| H A D | lt7182s.rst | 57 in[1-2]_input Measured input voltage
58 in[1-2]_highest Highest measured input voltage
59 in[1-2]_crit Critical maximum input voltage
60 in[1-2]_crit_alarm Input voltage critical high alarm
61 in[1-2]_min Minimum input voltage
62 in[1-2]_min_alarm Input voltage low alarm
63 in[1-2]_rated_min Rated minimum input voltage
64 in[1-2]_rated_max Rated maximum input voltage
68 in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
73 in[3-4|6-7]_input Measured output voltage
[all …]
|
| H A D | ir35221.rst | 54 in1_input Measured input voltage
55 in1_crit Critical maximum input voltage
56 in1_crit_alarm Input voltage critical high alarm
57 in1_highest Highest input voltage
58 in1_lowest Lowest input voltage
59 in1_min Minimum input voltage
60 in1_min_alarm Input voltage low alarm
63 in[2-3]_input Measured output voltage
64 in[2-3]_lcrit Critical minimum output voltage
65 in[2-3]_lcrit_alarm Output voltage critical low alarm
[all …]
|
| H A D | ir38064.rst | 45 IR38x6x are a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
65 in1_input Measured input voltage
66 in1_crit Critical maximum input voltage
67 in1_crit_alarm Input voltage critical high alarm
68 in1_min Minimum input voltage
69 in1_min_alarm Input voltage low alarm
72 in2_input Measured output voltage
73 in2_lcrit Critical minimum output voltage
74 in2_lcrit_alarm Output voltage critical low alarm
75 in2_crit Critical maximum output voltage
[all …]
|
| /openbmc/u-boot/drivers/power/ |
| H A D | Kconfig | 76 int "axp pmic dcdc1 voltage"
81 Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
83 generic 3.3V IO voltage for external devices like the lcd-panal and
90 int "axp pmic dcdc2 voltage"
98 Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
108 int "axp pmic dcdc3 voltage"
116 Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
127 int "axp pmic dcdc4 voltage"
134 Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
143 int "axp pmic dcdc5 voltage"
[all …]
|
| /openbmc/openbmc/meta-ieisystem/meta-fp5280g3/recipes-phosphor/configuration/fp5280g3-yaml-config/ |
| H A D | fp5280g3-ipmi-inventory-sensors.yaml | 26 /xyz/openbmc_project/sensors/voltage/PSU0_PIN:
31 /xyz/openbmc_project/sensors/voltage/PSU1_PIN:
36 /xyz/openbmc_project/sensors/voltage/PSU0_POUT:
41 /xyz/openbmc_project/sensors/voltage/PSU1_POUT:
46 /xyz/openbmc_project/sensors/voltage/PSU0_VIN:
51 /xyz/openbmc_project/sensors/voltage/PSU1_VIN:
56 /xyz/openbmc_project/sensors/voltage/PSU0_VOUT:
61 /xyz/openbmc_project/sensors/voltage/PSU1_VOUT:
311 /xyz/openbmc_project/sensors/voltage/P3V3:
316 /xyz/openbmc_project/sensors/voltage/P12V:
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/inventory/phosphor-inventory-manager/ |
| H A D | associations.json | 16 "/xyz/openbmc_project/sensors/voltage/ps0_input_voltage",
17 "/xyz/openbmc_project/sensors/voltage/ps0_output_voltage",
39 "/xyz/openbmc_project/sensors/voltage/ps1_input_voltage",
40 "/xyz/openbmc_project/sensors/voltage/ps1_output_voltage",
120 "/xyz/openbmc_project/sensors/voltage/P12V_STBY",
121 "/xyz/openbmc_project/sensors/voltage/P1V05_STBY_PCH",
122 "/xyz/openbmc_project/sensors/voltage/P3V3",
123 "/xyz/openbmc_project/sensors/voltage/P3V3_STBY",
124 "/xyz/openbmc_project/sensors/voltage/P3V_BAT",
125 "/xyz/openbmc_project/sensors/voltage/P5V",
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | vctrl.txt | 1 Bindings for Voltage controlled regulators
7 - regulator-min-microvolt : smallest voltage consumers may set
8 - regulator-max-microvolt : largest voltage consumers may set
9 - ctrl-supply : The regulator supplying the control voltage.
10 - ctrl-voltage-range : an array of two integer values describing the range
11 (min/max) of the control voltage. The values specify
12 the control voltage needed to generate the corresponding
13 regulator-min/max-microvolt output voltage.
20 actual output voltage deviates beyond a certain
22 voltage. On larger voltage decreases this can occur
[all …]
|
| H A D | pwm-regulator.yaml | 17 Voltage Table:
18 When in this mode, a voltage table (See below) of predefined voltage <=>
22 voltage selection are ignored and rendered useless. Although more control
23 is given to the user if the assumptions made in continuous-voltage mode do
26 Continuous Voltage:
30 solution when compared with voltage-table mode above. This solution does
32 voltage to run at half way between the supplied max_uV and min_uV values.
34 If voltage-table is provided, then the device will be used in Voltage Table
35 Mode. If no voltage-table is provided, then the device will be used in
36 Continuous Voltage Mode.
[all …]
|
| H A D | maxim,max8997.yaml | 13 The Maxim MAX8997 is a Power Management IC which includes voltage and current
33 max8997,pmic-buck1-dvs-voltage:
38 A set of 8 voltage values in micro-volt (uV) units for buck1 when
39 changing voltage using GPIO DVS.
41 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
42 specify at least one voltage level (which would be a safe operating
43 voltage).
45 max8997,pmic-buck2-dvs-voltage:
50 A set of 8 voltage values in micro-volt (uV) units for buck2 when
51 changing voltage using GPIO DVS.
[all …]
|
| H A D | regulator.yaml | 7 title: Voltage/Current Regulators
19 description: smallest voltage consumers may set
22 description: largest voltage consumers may set
25 description: Offset applied to voltages to compensate for voltage drops
66 reach the target voltage, plus/minus whatever tolerance the board
74 description: Settling time, in microseconds, for voltage change if regulator
75 have the constant time for any level voltage change. This is useful
76 when regulator have exponential voltage change.
79 description: Settling time, in microseconds, for voltage increase if
80 the regulator needs a constant time to settle after voltage increases
[all …]
|
| /openbmc/openbmc/meta-ampere/meta-jade/recipes-phosphor/configuration/mtjade-yaml-config/ |
| H A D | mtjade-ipmi-sensors.yaml | 129 path: /xyz/openbmc_project/sensors/voltage/S0_0V8_VDDC_SOC
148 path: /xyz/openbmc_project/sensors/voltage/S0_0V75_PCP
153 path: /xyz/openbmc_project/sensors/voltage/S0_1V2_VDDQ0123
158 path: /xyz/openbmc_project/sensors/voltage/S0_0V6_VTT0123
163 path: /xyz/openbmc_project/sensors/voltage/S0_2V5_VPP0123
168 path: /xyz/openbmc_project/sensors/voltage/S0_1V2_VDDQ4567
173 path: /xyz/openbmc_project/sensors/voltage/S0_0V6_VTT4567
178 path: /xyz/openbmc_project/sensors/voltage/S0_2V5_VPP4567
183 path: /xyz/openbmc_project/sensors/voltage/S0_0V85_RCA
188 path: /xyz/openbmc_project/sensors/voltage/S0_1V8_VDDH
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/power/ |
| H A D | rockchip-io-domain.yaml | 7 title: Rockchip SRAM for IO Voltage Domains
23 General Register File (GRF) in sync with the actual value of a voltage
27 any logic for deciding what voltage we should set regulators to
33 driver. When that other software adjusted a regulators voltage then
42 to report their voltage. The IO Voltage Domain for any non-specified
48 - rockchip,px30-io-voltage-domain
49 - rockchip,px30-pmu-io-voltage-domain
50 - rockchip,rk3188-io-voltage-domain
51 - rockchip,rk3228-io-voltage-domain
52 - rockchip,rk3288-io-voltage-domain
[all …]
|
| /openbmc/linux/include/linux/regulator/ |
| H A D | machine.h | 24 * VOLTAGE: Regulator output voltage can be changed by software on this
66 * @uV: Default operating voltage during suspend, it can be adjusted
68 * @min_uV: Minimum suspend voltage may be set.
69 * @max_uV: Maximum suspend voltage may be set.
101 * @min_uV: Smallest voltage consumers may set.
102 * @max_uV: Largest voltage consumers may set.
104 * voltage drops.
112 * @over_voltage_limits: Limits for acting on over voltage.
113 * @under_voltage_limits: Limits for acting on under voltage.
117 * @max_uV_step: Max possible step change in voltage
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-s6q/recipes-phosphor/configuration/s6q-yaml-config/ |
| H A D | ipmi-inventory-sensors.yaml | 126 /xyz/openbmc_project/sensors/voltage/Volt_FAON_CPU0:
131 /xyz/openbmc_project/sensors/voltage/Volt_FAON_CPU1:
136 /xyz/openbmc_project/sensors/voltage/Volt_P1V0:
141 /xyz/openbmc_project/sensors/voltage/Volt_P1V2:
146 /xyz/openbmc_project/sensors/voltage/Volt_P1V2_MAX_MB:
151 /xyz/openbmc_project/sensors/voltage/Volt_P1V8:
156 /xyz/openbmc_project/sensors/voltage/Volt_P1V05PCH_MB:
161 /xyz/openbmc_project/sensors/voltage/Volt_P2V5:
166 /xyz/openbmc_project/sensors/voltage/Volt_P2V5_MAX_MB:
171 /xyz/openbmc_project/sensors/voltage/Volt_P3V3:
[all …]
|
| /openbmc/openbmc/meta-ufispace/meta-ncplite/recipes-phosphor/configuration/ncplite-yaml-config/ |
| H A D | ncplite-ipmi-sensors.yaml | 48 0x20: &voltage
52 path: /xyz/openbmc_project/sensors/voltage/P3V3_ADC0
71 <<: *voltage
73 path: /xyz/openbmc_project/sensors/voltage/P1V8_ADC1
77 <<: *voltage
79 path: /xyz/openbmc_project/sensors/voltage/P1V2_ADC2
83 <<: *voltage
85 path: /xyz/openbmc_project/sensors/voltage/P1V2_ADC3
89 <<: *voltage
91 path: /xyz/openbmc_project/sensors/voltage/P0V8_ADC4
[all …]
|