/openbmc/openbmc/meta-facebook/meta-minerva/recipes-phosphor/initrdscripts/phosphor-static-norootfs-init/ |
H A D | 99-platform-init | 27 # The PoE interface is connected to STM32F + BCM59011 PoE controller (Broadcom solution) for PoE po… 28 # BMC can control the PoE power supply by sending command to STM32F via RS232. 32 # D_POE_x = End device for smart valve x via PoE 51 # P54 POE----->|D_POE_0| |D_POE_1| 55 # Send Power Source Configuration Command (0x18) to STM32F for enable PoE
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | armada-385-atl-x530.dtsi | 71 poe { 72 compatible = "atl,periph-poe"; 73 poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; 116 poe-disable { 120 line-name = "poe-disable"; 125 poe-mezz-reset { 129 line-name = "poe-mezz-reset"; 144 i2c@0 { /* POE devices MUX */
|
/openbmc/linux/drivers/pwm/ |
H A D | pwm-raspberrypi-poe.c | 4 * For more information on Raspberry Pi's PoE hat see: 5 * https://www.raspberrypi.org/products/poe-hat/ 21 #include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h> 181 { .compatible = "raspberrypi,firmware-poe-pwm", }, 188 .name = "raspberrypi-poe-pwm",
|
H A D | Makefile | 45 obj-$(CONFIG_PWM_RASPBERRYPI_POE) += pwm-raspberrypi-poe.o
|
H A D | Kconfig | 468 tristate "Raspberry Pi Firwmware PoE Hat PWM support" 474 official RPI PoE hat
|
/openbmc/linux/Documentation/devicetree/bindings/arm/bcm/ |
H A D | raspberrypi,bcm2835-firmware.yaml | 72 const: raspberrypi,firmware-poe-pwm 105 compatible = "raspberrypi,firmware-poe-pwm";
|
/openbmc/u-boot/arch/mips/dts/ |
H A D | ocelot_pcb120.dts | 21 label = "pcb120:green:poe"; 27 label = "pcb120:red:poe";
|
/openbmc/linux/fs/overlayfs/ |
H A D | namei.c | 1006 struct ovl_entry *poe = OVL_E(dentry->d_parent); in ovl_lookup() local 1027 .last = ovl_redirect_follow(ofs) ? false : !ovl_numlower(poe), in ovl_lookup() 1074 poe = roe; in ovl_lookup() 1079 if (!d.stop && ovl_numlower(poe)) { in ovl_lookup() 1086 for (i = 0; !d.stop && i < ovl_numlower(poe); i++) { in ovl_lookup() 1087 struct ovl_path lower = ovl_lowerstack(poe)[i]; in ovl_lookup() 1090 d.last = i == ovl_numlower(poe) - 1; in ovl_lookup() 1151 * redirect on this dentry, poe can be reset to roe. in ovl_lookup() 1181 if (d.redirect && d.redirect[0] == '/' && poe != roe) { in ovl_lookup() 1182 poe = roe; in ovl_lookup() [all …]
|
/openbmc/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3399-roc-pc-mezzanine.dts | 18 /* MP8009 PoE PD */ 19 poe_12v: poe-12v {
|
/openbmc/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm53015-meraki-mr26.dts | 116 label = "poe"; 147 compatible = "ti,ina219"; /* PoE power */
|
H A D | bcm47081-luxul-xap-1410.dts | 78 label = "poe";
|
H A D | bcm4708-luxul-xap-1510.dts | 78 label = "poe";
|
H A D | bcm47094-luxul-xap-1610.dts | 113 label = "poe";
|
H A D | bcm53016-meraki-mr32.dts | 177 label = "poe";
|
/openbmc/u-boot/board/egnite/ethernut5/ |
H A D | ethernut5.c | 30 * Linear Technology LTC4411 PoE controller 34 * 100 Mbit Ethernet with IEEE 802.3af PoE
|
/openbmc/linux/Documentation/devicetree/bindings/reset/ |
H A D | delta,tn48m-reset.yaml | 22 * PoE PSE controller
|
/openbmc/linux/arch/arm/boot/dts/marvell/ |
H A D | armada-385-clearfog-gtr.dtsi | 177 cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins { 444 poe-reset { 448 line-name = "poe-reset";
|
H A D | armada-385-atl-x530.dts | 114 i2c@0 { /* POE devices MUX */
|
/openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
H A D | ti,tps23861.yaml | 8 title: TI TPS23861 PoE PSE
|
/openbmc/linux/drivers/hwmon/ |
H A D | tps23861.c | 5 * Driver for the TI TPS23861 PoE PSE. 496 seq_printf(s, "PoE Plus: \t%s\n", port_poe_plus_status_string(poe_plus, i)); in tps23861_port_status_show() 595 MODULE_DESCRIPTION("TI TPS23861 PoE PSE");
|
/openbmc/linux/Documentation/hwmon/ |
H A D | tps23861.rst | 18 This driver supports hardware monitoring for Texas Instruments TPS23861 PoE PSE.
|
/openbmc/linux/arch/mips/boot/dts/mscc/ |
H A D | jaguar2_pcb111.dts | 33 pinctrl-4 = <&i2cmux_pins_i>; // Added by convention for PoE
|
/openbmc/openbmc/meta-raspberrypi/conf/machine/include/ |
H A D | rpi-base.inc | 62 overlays/rpi-poe.dtbo \
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | stm32mp157c-lxa-mc1.dts | 97 /* supplied by either debug board or PoE */
|
/openbmc/linux/drivers/reset/ |
H A D | Kconfig | 291 Microchip PD69200 PoE PSE controller.
|