| /openbmc/linux/drivers/regulator/ |
| H A D | tps65912-regulator.c | 20 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator
106 TPS65912_REGULATOR("LDO8", LDO8, "ldo8", tps65912_ops_ldo,
|
| H A D | palmas-regulator.c | 171 .name = "LDO8",
172 .sname = "ldo8-in",
350 EXTERNAL_REQUESTOR(LDO8, 2, 7),
860 dev_err(palmas->dev, "Error in reading ldo8 control reg\n"); in palmas_enable_ldo8_track()
871 * When SMPS45 is set to off and LDO8 tracking is enabled, the LDO8 in palmas_enable_ldo8_track()
878 dev_err(palmas->dev, "Error in reading ldo8 voltage reg\n"); in palmas_enable_ldo8_track()
885 dev_err(palmas->dev, "Error in setting ldo8 voltage reg\n"); in palmas_enable_ldo8_track()
937 /* Check if LDO8 is in tracking mode or not */ in palmas_ldo_registration()
1408 { .name = "ldo8", },
1547 np, "ti,enable-ldo8-tracking"); in palmas_dt_to_pdata()
|
| H A D | qcom-rpmh-regulator.c | 836 RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd-l2-l8-l17"),
898 RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l1-l8-l11"),
928 RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l1-l8"),
954 RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l1-l8-l11"),
985 RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo515_mv, "vdd-l8-l9"),
1010 RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
1034 RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l2-l8"),
1066 RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l8-l9"),
1148 RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l4-l7-l8"),
1179 RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l1-l8"),
[all …]
|
| H A D | da9052-regulator.c | 342 DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
359 DA9052_LDO(LDO8, ldo8, 50, 1200, 3600, 6, 6, 0),
|
| H A D | max77620-regulator.c | 740 RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
758 RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
776 RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
|
| H A D | max8907-regulator.c | 160 LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8),
201 MATCH(ldo8, LDO8),
|
| H A D | 88pm800-regulator.c | 212 PM800_LDO(ldo8, LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | max8925-regulator.txt | 15 - LDO8 for LDO LDO8
|
| H A D | tps6586x.txt | 22 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
125 ldo8_reg: ldo8 {
|
| H A D | 88pm800.txt | 15 ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
|
| H A D | regulator-max77620.txt | 26 in-ldo7-8-supply: Input supply for LDO7 and LDO8.
216 ldo8 {
|
| H A D | max8907.txt | 26 sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
|
| H A D | active-semi,act8600.yaml | 120 LDO8 {
|
| /openbmc/linux/arch/arm/boot/dts/actions/ |
| H A D | owl-s500-roseapplepi.dts | 68 ldo8-supply = <&syspwr>;
135 ldo8: ldo8 { label
136 regulator-name = "LDO8";
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | da9052-i2c.txt | 30 ldo8 : regulator LDO8
|
| H A D | tps65910.txt | 26 ldo6, ldo7, ldo8
46 vcc3-supply: LDO6, LDO7 and LDO8 input.
197 regulator-compatible = "ldo8";
|
| H A D | as3711.txt | 5 "regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | s5pc1xx-goni.dts | 94 ldo8_reg: LDO8 {
95 regulator-compatible = "LDO8";
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | e60k02.dtsi | 258 ldo8_reg: LDO8 {
259 regulator-name = "LDO8";
|
| H A D | e70k02.dtsi | 274 ldo8_reg: LDO8 {
275 regulator-name = "LDO8";
|
| H A D | imx53-qsb.dts | 88 ldo8_reg: ldo8 {
|
| H A D | imx6sl-kobo-aura2.dts | 267 ldo8_reg: LDO8 {
268 regulator-name = "LDO8";
|
| /openbmc/linux/arch/arm/boot/dts/nvidia/ |
| H A D | tegra114-tn7.dts | 202 ldo8 {
206 ti,enable-ldo8-tracking;
|
| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | sm6350-sony-xperia-lena-pdx213.dts | 110 pm6350_l8: ldo8 {
244 pm6150l_l8: ldo8 {
|
| H A D | sa8775p-ride.dtsi | 98 vreg_l8a: ldo8 {
195 vreg_l8c: ldo8 {
251 vreg_l8e: ldo8 {
|