| /openbmc/u-boot/test/dm/ |
| H A D | regulator.c | 29 LDO2, enumerator
143 /* Check LDO2 current limit constraints - should be -ENODATA */ in dm_test_power_regulator_set_get_current()
144 platname = regulator_names[LDO2][PLATNAME]; in dm_test_power_regulator_set_get_current()
152 /* Try set the Current of LDO2 - should return -ENOSYS */ in dm_test_power_regulator_set_get_current()
267 * - LDO2
280 * - LDO2
289 [1] = { /* LDO2 */
313 * LDO2 with fdt properties: in dm_test_power_regulator_autoset_list()
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | ltc3676.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
13 nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
24 Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
72 ldo2_reg: ldo2 {
|
| H A D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
13 nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
20 Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
79 ldo2_reg: ldo2 {
|
| H A D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
58 LDO2 {
59 regulator-name = "ldo2";
|
| H A D | nxp,pca9450-regulator.yaml | 22 # LDO1, LDO2, LDO3, LDO4, LDO5
165 ldo2: LDO2 {
166 regulator-name = "LDO2";
|
| H A D | hisilicon,hi655x-regulator.txt | 21 ldo2: LDO2@a21 {
|
| H A D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
42 LDO2 {
43 regulator-name = "ldo2";
|
| H A D | max8925-regulator.txt | 9 - LDO2 for LDO LDO2
|
| H A D | mcp16502-regulator.txt | 20 6) LDO2 - LDO (1.2 - 3.7 V)
128 LDO2 {
129 regulator-name = "LDO2";
|
| H A D | tps6586x.txt | 19 - vinldo01-supply: The input supply for the LDO1 and LDO2
20 - vinldo23-supply: The input supply for the LDO2 and LDO3
95 ldo2_reg: ldo2 {
|
| H A D | mps,mp5416.yaml | 70 ldo2 {
71 regulator-name = "ldo2";
|
| H A D | maxim,max77686.yaml | 32 LDO2, LDO6-8, LDO10-12, LDO14-16
38 "^LDO2[0-2]$":
|
| /openbmc/linux/drivers/regulator/ |
| H A D | tps65912-regulator.c | 19 enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, enumerator
88 TPS65912_REGULATOR("LDO2", LDO2, "ldo2", tps65912_ops_ldo,
|
| H A D | tps65219-regulator.c | 43 { "LDO2_SCG", "LDO2", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
44 { "LDO2_OC", "LDO2", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
45 { "LDO2_UV", "LDO2", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
62 { "LDO2_RV", "LDO2", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
72 { "LDO2_RV_SD", "LDO2", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
248 TPS65219_REGULATOR("LDO2", "ldo2", TPS65219_LDO_2,
|
| H A D | max8893.c | 54 .name = "LDO2",
55 .supply_name = "in-ldo2",
56 .of_match = of_match_ptr("ldo2"),
|
| H A D | qcom-rpmh-regulator.c | 830 RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd-l2-l8-l17"),
892 RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l10"),
922 RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
948 RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l10"),
979 RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2-l3"),
1004 RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"),
1028 RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo_lv, "vdd-l2-l8"),
1052 RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
1060 RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"),
1089 RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | dra72-evm-tps65917.dtsi | 31 ldo2-in-supply = <&vsys_3v3>;
92 ldo2_reg: ldo2 {
93 regulator-name = "ldo2";
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra72-evm-tps65917.dtsi | 28 ldo2-in-supply = <&vsys_3v3>;
89 ldo2_reg: ldo2 {
90 regulator-name = "ldo2";
|
| /openbmc/u-boot/board/nvidia/e2220-1170/ |
| H A D | e2220-1170.c | 20 /* Turn on MAX77620 LDO2 to 3.3V for SD card power */ in pin_mux_mmc()
21 debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); in pin_mux_mmc()
|
| /openbmc/u-boot/board/nvidia/p2371-0000/ |
| H A D | p2371-0000.c | 20 /* Turn on MAX77620 LDO2 to 3.3V for SD card power */ in pin_mux_mmc()
21 debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); in pin_mux_mmc()
|
| /openbmc/u-boot/board/nvidia/p2571/ |
| H A D | p2571.c | 21 /* Turn on MAX77620 LDO2 to 3.3V for SD card power */ in pin_mux_mmc()
22 debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); in pin_mux_mmc()
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | da9052-i2c.txt | 24 ldo2 : regulator LDO2
|
| H A D | ti,tps6594.yaml | 131 ldo2-supply = <&vcc_3v3_sys>;
168 ldo2: ldo2 {
|
| H A D | wm831x.txt | 44 ldo2 : LDO2
|
| H A D | da9055.txt | 36 ldo2 : regulator LDO2
|