/openbmc/u-boot/doc/device-tree-bindings/regulator/ |
H A D | tps65090.txt | 17 - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. 19 - "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. 62 dcdc3 { 63 regulator-name = "dcdc3";
|
/openbmc/u-boot/drivers/power/ |
H A D | Kconfig | 108 int "axp pmic dcdc3 voltage" 116 Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to 117 disable dcdc3. 118 On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and 120 On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. 121 On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. 122 On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V. 123 On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. 124 On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
|
/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | tps65090.txt | 17 - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. 19 - dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. 66 dcdc3 { 67 regulator-name = "dcdc3";
|
H A D | tps65218.txt | 15 tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4, 43 dcdc3: regulator-dcdc3 {
|
/openbmc/linux/Documentation/devicetree/bindings/mfd/ |
H A D | wm831x.txt | 39 dcdc3 : DCDC3 40 dcdc4 : DCDC3
|
H A D | tps6507x.txt | 28 - defdcdc_default: It's property of DCDC2 and DCDC3 regulators. 29 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND. 30 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
|
H A D | actions,atc260x.yaml | 148 dcdc3-supply = <®_5v0>; 159 vcc: dcdc3 {
|
/openbmc/linux/drivers/regulator/ |
H A D | tps65912-regulator.c | 19 enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, enumerator 79 TPS65912_REGULATOR("DCDC3", DCDC3, "dcdc3", tps65912_ops_dcdc,
|
H A D | axp20x-regulator.c | 613 AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25, 640 AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20, 742 AXP_DESC_RANGES(AXP313A, DCDC3, "dcdc3", "vin3", 809 AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", 970 AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20, 1041 AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", 1148 AXP_DESC_RANGES(AXP15060, DCDC3, "dcdc3", "vin3",
|
H A D | tps65218-regulator.c | 140 * Certain revisions of TPS65218 will need to have DCDC3 regulator in tps65218_pmic_set_suspend_disable() 173 /* Operations permitted on DCDC3, DCDC4 and LDO1 */ 259 TPS65218_REGULATOR("DCDC3", "regulator-dcdc3", TPS65218_DCDC_3,
|
H A D | rn5t618-regulator.c | 47 REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500), 64 REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500), 80 REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
|
H A D | tps65217-regulator.c | 182 TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
|
/openbmc/linux/arch/arm64/boot/dts/allwinner/ |
H A D | axp803.dtsi | 64 reg_dcdc3: dcdc3 { 65 regulator-name = "dcdc3";
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | axp209.dtsi | 85 reg_dcdc3: dcdc3 { 86 regulator-name = "dcdc3";
|
H A D | axp803.dtsi | 80 reg_dcdc3: dcdc3 { 81 regulator-name = "dcdc3";
|
H A D | axp22x.dtsi | 77 reg_dcdc3: dcdc3 { 78 regulator-name = "dcdc3";
|
H A D | tps65217.dtsi | 33 regulator-compatible = "dcdc3";
|
/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | axp209.dtsi | 92 reg_dcdc3: dcdc3 { 93 regulator-name = "dcdc3";
|
H A D | axp22x.dtsi | 88 reg_dcdc3: dcdc3 { 89 regulator-name = "dcdc3";
|
/openbmc/linux/include/linux/regulator/ |
H A D | tps6507x.h | 14 * output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
|
/openbmc/linux/include/linux/mfd/wm8350/ |
H A D | pmic.h | 242 * R186 (0xBA) - DCDC3 Control 249 * R187 (0xBB) - DCDC3 Timeouts 264 * R188 (0xBC) - DCDC3 Low Power 580 * R250 (0xFA) - DCDC3 Force PWM
|
/openbmc/linux/arch/arm/boot/dts/actions/ |
H A D | owl-s500-roseapplepi.dts | 61 dcdc3-supply = <&syspwr>; 88 vcc: dcdc3 {
|
/openbmc/linux/arch/arm/boot/dts/ |
H A D | tps65217.dtsi | 45 regulator-compatible = "dcdc3";
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | e60k02.dtsi | 161 dcdc3_reg: DCDC3 { 162 regulator-name = "DCDC3";
|
H A D | e70k02.dtsi | 179 dcdc3_reg: DCDC3 { 180 regulator-name = "DCDC3";
|